1500 modeli
This is a print-in-place telescoping holder for colored art pencils. To raise it, grab the handle, twist clockwise, pull up, then twist counterclockwise to lock in place. In the raised position, you can easily see all the pencils. To…
Wydruk około 10,39 €–12,69 € nettoWstępna wycena jednego wariantu
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Muffenstopfen DN110 nach Norm Zur Abdeckung von Rohren
Wydruk około 3,48 €–4,26 € nettoWstępna wycena jednego wariantu
Zlin Agroturbo 1100 Version 1.0 (12.11.2023) Wingspan: ca. 1100 mm Body length: ca. 750 mm Take-off weight: ca. 550 - 650 g Motor: Brushless Motor 28mm Durchmesser (2200kV) ESC: 30A brushless-ESC Propeller: 7*5 ‘’ Battery: 3s Lipo 800 -…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu
Bought a used HEMNES bed that was missing a bunch of these 110525 pins. Printed in two parts and then squezed together. Printed on Anycubic Kobra Neo with 0.4mm nozzle in PLA.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is a holder for Knipex pliers for the Ikea skadis pegboard, printed in one part. It fits Knipex model 70 15 110 and Knipex model 08 05 110 I designed this model completely new from scratch, but it is inspired by Aaron s Knipex holder…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks. Up to 1.7m film length Up to 3 spirals in the 2x135 tank 16mm, 110 Instamatic, 2x8mm film format 250ml working solution Printing…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
This is a 3D printable glue-fit enclosure for building a custom power bank using the IP5328P_V1.0 module and a 1260110 high-capacity 3.7V 10000mAh Li-Po battery . The design ensures a precise internal fit while offering a compact, sleek,…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
This is a holder for Samsung Galaxy Tab A9 Lite SM-X110 tablet, which you can screwto the wall. Power would come from the back. I would recommend getting angle power cable. Description on Youtube:
Wydruk około 8,16 €–9,97 € nettoWstępna wycena jednego wariantu
simple camera TAPO C110 holder for Prusa mini+
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Can be used to connect a D100 hose to a DN110 system.
Wydruk około 6,99 €–8,55 € nettoWstępna wycena jednego wariantu
Kloubový držák upravený na nasunutí na svěrku XTline 8 cm. Spoj na tyčce vyztužený převlečným válečkem. Díru ve spodním komponentu si případně upravte podle své svěrky. (Tinkercad) Kamera je na destičce zajištěna dvěma jistícími sponkami.…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a holder for a Netgear GS110 to fix vertically on the SKÅDIS pegboard. It also fits other Netgear GS1xx series. It uses a dovetail system (see below) removing the hassle of those pegs. It's a tight fit. I added a file with…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While you can do this with a split and connectors in Prusa slicer the dowels are never exactly in the centre. As well I found 6mm airsoft balls a bit too large. these are 5.8. They work a lot better for the print of the models ( ). To…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Simple print, these two brackets give the scope a slight downwards angle so that it can be mounted higher up (I have mine over my monitor). The scope clicks into these brackets and is very firmly held in place. Let me know if you like…
Wydruk około 6,51 €–7,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tisk opět na dvě poloviny, PLA, výplň 10%, tryska 0,4.
Wydruk około 2,81 €–3,43 € nettoWstępna wycena jednego wariantu
I printed mine with PETG 0,3mm thick layer 30% infil, 150% speed, on MK4 took under 2h to print. Model has 2 6mm holes for mounting a line or chain to prevent loosing.
Wydruk około 3,75 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 8,62 €–10,53 € nettoWstępna wycena jednego wariantu
It is a Stand for the Dillon RL1100 Toolhead, that can be screwed down and the dimensions make it easy to place the toolhead on top.
Wydruk około 8,01 €–9,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hier präsentiere ich euch meine erste selbst designte AEG Z1311005 Akkuwandhalterung. Ich habe sie mit dem SUNLU MetaPLA in schwarz gedruckt. Layerhöhe: 0.25mm Draft (Profile Prusa MINI/MINI+) Infill: 15% Infill-Struktur: Gyroid…
Wydruk około 9,78 €–11,96 € nettoWstępna wycena jednego wariantu
I use the TP-Link Tapo C110 as a surveillance camera, for which I designed a magnetic mount. After implementing the TOP Cover MOD, an update to this mount became necessary, providing a perfect opportunity for further refinement. You no…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
Bring a bit of winter “street style” to your desk with this white puffer-jacket (Montclair-style) pen holder . The padded sleeves, front seam details, and chunky “pockets” make it a fun, modern desk accessory that still looks clean and…
Hey, this is an caliper which can messure a maximum of 110mm. To be clear right from the start, you shouldn't expect the highest precision from a 3D-printed caliper. You can measure well with it, and I would say the measurement result is…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** First I took on the challenge of creating a STRONG split key ring for everyday…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
The rugged box measures 110mm x 220mm x 75mm, providing a durable and practical storage solution. Designed with integrated slots for metric nuts, it ensures secure assembly and enhanced functionality. Its compact size and sturdy…
I only found one model on thingiverse by Lenry. Didn't like the fit and finish and was only 90mm. (https://www.thingiverse.com/thing:228267) I took his design and made it better for my use which is becoming more common in the USA.…
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
This is the goldilocks ornament, not too big, not too small, but just right. It is 9-sided or Nonagonal, so looks really nice. It is 110 mm from the very top of to the bottom, and about 47mm at the widest point. I found many ornaments to…
Case for my CC1101 attachment for Flipper Zero and Spacers. Use some white filament and flatten it for the led diffuser. Printed with eSUN PLA + Black on the below textured sheets Smooth Triangles https://s.click.aliexpress.com/e/_mrFsNmm…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
Modification of Deburring Tool Case 154mm (Libraton) - Rugged Box Style to fit NB1100 deburring tool. In this remix you can find part to fit NB1100 deburring tool to fit to original box made by user @Shadow_1242354 . You just need to…
Electrical Junction Box 80x110x50
Пересмотрел много вариантов и платных и бесплатных. Понимаю, что вариантов уже полно в интернете, которые можно просто скачать и распечатать. Но мне хотелось смоделировать форму самому. Захотелось выдать не только готовый вариант, но и…
Heizkörper Entlüftungs-Schlüssel 5,5mm (110%) Dies ist eine Neuauflage, da bei dem ursprünglichen (5mm 4kt) viele mit 110% skaliert haben. Die ursprüngliche Version findet Ihr hier:…
Please read before printing: This is work in progress. I’ve been inspired by @soozafone https://www.printables.com/pl/model/593185-dummy-13-printable-jointed-figure-beta-files design and after printing few other remix I ended up making…
Do you still have some strips of 110 film that were used in pocket cameras back in the 1970s and 1980s? And do you have a Plustek OpticFilm scanner? This is a film holder for 110 films. Just place the film strip into the holder, put the…
This model is compatible with the lego system.
Ein Gitter, das in die Muffe eines DN110-HT-Rohres passt. Das Außenmaß der Einsteckseite ist 110mm, was dem Normdurchmesser eines DN110 HT-Rohres entspricht. Früher wurde dieses Rohr mit DN100 bezeichnet.
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!) Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS Case is for using…
You can find pre-soldered hardware + fan kits here: https://exen.sh/products/diy-kit-direct-mount-cooler
Case for ESP32 Board (NodeMCU V2, Attention: only for the one with Mounting Holes!) and CC1101 Transceiver. Toolless assembly.
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler
Needed a surface mount electrical outlet box to fit regular 110V outlets and shields into.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
As previously stated, it is just a little case for the SSH1106 OLED. Uses 4 M3 nuts and bolts to hold it together and provides quite a bit of protection. (they might be m2 thinking about it…) just print it with the face down if you want…
THERE IS A NEW VARIANT AVAILABLE https://www.printables.com/model/1028469-voron-trident-110mm-y-alignment-guide-jig-v2 A 110mm alignment guide for the VORON Trident. Print 2 pieces. Material doesnt mater as long as its not TPU Step File…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
The bean tray of the DeLonghi Magnifica S is small. WARNING: Some people are reporting problems, I printed this without issues but some people seems to experience fitting problems. Take a look at the comments see for yourself. If you…
Based on https://www.printables.com/model/309750-eu-license-plate-holder
This stackable planter is Inspired by a design from "3D Printing Nerd" but it's my own implementation. I've made it a while ago but somehow forgot to upload it. So - here you are. If you like this, you might want to check out my other…
Self-watering planter designed for my carnivorous plants. You can customize dimensions in Fusion 360 using "Modify->Change Parameters".
This is a stand to add additional stability 3 different types of gas canisters commonly used in backpacking/camping stoves (65mm, 90mm, and 110mm). The goal was to make a gas stand that fits several different sizes of canisters, without…
I loved https://www.printables.com/@GerryPB her loom design, but the spacing of the ‘comb’ was too large for my wife's Miyuki Delica 110 bead bracelets. So I designed my own stand and you need to use the peg and key of GerryPB's design.…
Keep your belongings organized with this stylish and practical Knurled Storage Container! Featuring a distinctive diamond-pattern exterior, a cylindrical body, and a matching screw-on cap, this container combines functional storage with a…
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…
This print is for a mechanical iris with a open ID of 110mm and a overall OD of 180mm minus mounting lugs. Files include cad drawings in FreeCad 0.19, STLs, PursaSlicer 2.4.1 3mf files, and pre sliced gcode for a i3 MK3. If you re slice…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
print it sideways for best strenght. 99 walls, best in abs or asa for weather resistance. if you dont have abs or asa, use at least petg and change every half year.
The Technics SL-J110R has a flawed hinge design where the spring is too strong and cracks the plastic. As these record players are pushing 30 years old, there are no new hinge available, and most of them seem to have broken. Taking…
86° angle restriction clip for 110° BLUM hinge. Model number: 70T3553 Assembly guide: https://ea.blum.com/en/opening-angle-stops-for-110-and-107-hinges/ Printed with PLA and 20% strength with outer brim for better bed adhesion.
You might be familiar with my original conversion . Well, I've since made a version that replaces the top cover of the camera with a custom 3D-printed design that allows clearance to eject Instax Wide the right way up. It even has…
GoPro mount for TP-Link Tapo C100/C110 IP camera Print instructions Category: Camera Summary GoPro mount for TP-Link Tapo C100/C110 IP camera Print Settings Printer: Prusa MINI Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…
This is just my take on the commonplace hinged rugged box design. They're all much of a muchness, and mine was VERY loosely based on Yanev's design: https://www.printables.com/model/39729-tool-box-parametric I literally just made an…
Fan duct to connect 120mm fan to DN110 pipe. Outer diameter of cilinder is 103mm to fit into 110mm pipe. Use few turns of tape for tight fit.
It needs to be printed on SLA resin printer. FDM not tested.
After receiving a second hand TP-Link EAP225-Outdoor access point, I discovered that the original wall mount bracket was missing. The design has a low profile and no locking mechanism. Print wall-side down, no supports required.
A Lithophane in the size of 110 x 110 mm depicting the Carina Nebula that was captured with the James Webb Telescope . The Image of the Carina Nebula is framed in a hexagon grid resembling the James Webb Telescope. It consists of two…
Bracket for road- or gravel bike to safe space during bike transport. Printable without support if layed on the side. I recomend to drill out the 12mm hole after printing due to schrinkage. I printed it with 5% infill and just 2…
Replacement base for TP-Link Tapo C100/C110 Cameras. I got a good deal on several of these cameras, but they were missing the bases, so I designed and printed some. I used Polymaker Polyterra PLA Cotton White just because it's matte and…
This is the second iteration of my Voron Trident Y Axis 110mm Alignment Guide/Jig Faster print Easy to assemble Less filament consumption
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
Baskets are one-piece easy-to-print and lightweight to save print material. They are held in position by the rubber bumps under the printers. A slot in the front makes it easy to pick out printed labels. Holes in the base plate are round…
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
Updated with the newest version, this conversion is now non-destructive and reversible! 4 August 2023: If you're converting a 110a, 800, or 150 - take a look at the newer, deluxe version of this conversion. It's easier to print, looks…
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…
This is a 65% mechanical keyboard design inspired by the Apple M0110 keyboard and the Apple II computer using the KBDfans Tofu65 2.0 PCB. It's originally designed to be printed on a Voron 2.4r2 300 but any printer with enough space should…
Set of straight tracks 30, 60, 110, 150 and 200 mm long (most usual sizes). Compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden…
This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm. This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used…
This is a reusable 110 film cartridge. My original design is for a "fast" film speed, but I have added a "slow" speed cartridge too. You can cut 35mm film into 110 by cutting it in half (in the dark, carefully). Various people on Etsy…
Simple drawer box with dividers all sized 240mm L x 110mm W x 45mm H. Also includes “extension” box that fits wider / deeper drawers sized 180mm L x 110mm W x 45mm H. Basic structure that should print easy. I used ABS+ with typical 4mm…
The sculpture is enlarged by 110 %, split into two parts I added a connection joint so there is no need to glue it. Category: Sculptures
A remix for the great H1 case that supports the new, longer, 1100mAh battries that are now being sold by MakerFocus:…
I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers. Update 3/14/23: I printed a piece to compare and my measurements…
can be used in a 120mm fan casing, it s 25mm thick
Play Fair! Referee cards with the profesional size 80 x 110 mm Thickness 1.5mm Have fun printing
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…
Hier handelt es sich um einen Deckel mit 5mm Löchern für ein KG Rohr mit 110mm Nennweite, um Räume be- bzw. entlüften zu können ohne das Tiere hereinkommen. Hilfreich bei feuchten Garagen, Abluftwäschetrockner usw.
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
Flashforge Adventurer 5M Mount for the TP-Link Tapo C100, C110, C101 Camera. I made this one as there was no way to put my C101 inside the enclosure, and I didn't want it attached to the door. This mount is designed to work even with a…
This model is compatible with the lego system.
Update: This concept needs work 7/20/2024 Long story short when made of PETG the skids ended up snapping off after a few times of using the snow blower. I don't think they ever really got worn down. I am going to leave this up as maybe a…
My initial Paper Holder HP P1102w broken. Note: this part (paper holder) can to replace part number rm1-6903-000cn I didn't find appropriate part, so desided to create by myself. So, if it help to someone to solve the same problem - will…
![TP-Link Tapo C110 Adapter for CORE One for TOP Cover MOD [Remix]](https://media.printables.com/media/prints/695e7551-f460-4fae-ab09-6b027a503d5d/images/12571620_db238211-2cb5-43a0-b97d-d217f6e46910_bc4194a2-cba4-440e-9965-7052c1ecb608/pxl_20260407_120524095.jpg)
![#0110 STRONG Round Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/649764/images/5140960_15cdce87-8223-450e-aa50-46aad106d16f_e6506626-dde5-4a1d-90d2-5199e5125402/20231118_174057.jpg)
