Wyniki wyszukiwania: 125mm

Sortowanie

305 modeli

P
PrintablesMartin_au

125mm (5") sandpaper storage

Ready for MMU. Print the partitions on their side with 0 top and bottom layers. I used honeycomb infill.

Pobrania
2523
Polubienia
1060
Ocena
4,71
P
PrintablesMartin_au

125mm Sandpaper Storage version 2

I liked my earlier design, but found it tricky to extract individual discs sometimes. This design removes that issue as it uses removable “drawers”. The drawers are held in place with 10Øx3mm magnets though these aren't entirely…

Pobrania
1423
Polubienia
789
Ocena
4,75
P
PrintablesFyrby Additive

Inline Valve For 100mm, 125mm & 150mm Pipes

🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are butterfly valves for flexible 100mm, 125mm and 150mm pipes commonly used in ventilation. They are made to fit inside the pipes, and for you to clamp the pipes onto it from the outside. They print with no…

Pobrania
966
Polubienia
443
Ocena
5
P
PrintablesPascal Lieverse

Skadis 125mm sanding disc holder

A Skadis 125mm sanding disc holder in 40mm or 80mm height.

Pobrania
931
Polubienia
324
Ocena
5
P
PrintablesLDeath

Stackable Orbit Sanding Paper Holder 125mm (5") - Taller Version

A taller version of the great design from @wesselbaum_1405367

Pobrania
761
Polubienia
376
Ocena
4,75
P
PrintablesP_B1234

Drill sharpening tool for angle grinder 125mm

With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…

Pobrania
753
Polubienia
77
Ocena
5
P
PrintablesJakub

Sandpaper holder 125mm

Sanding paper holder for eccentric grinder 125mm Mounting is by means of two screw holes. Print Settings Rafts: No Supports: No Infill: 20% Filament: PLA or whatever…

Pobrania
738
Polubienia
142
Ocena
5
P
Printablesjcjames_13009

Sanding Blocks 125mm and 150mm Sanding Disks

To complete my Mirka DEROS sander and don't have to take it out for small and quick jobs, I designed and 3D printed sanding blocks for the 125mm and 150mm sanding disks I use Design Design from Fusion 360 is quite simple. I started from…

Pobrania
672
Polubienia
130
Ocena
5
P
PrintablesJan K.

Orbital Sander Magazine & Alignment helper | 125mm / 5" | 8-Hole

This is a magazine for the easy rapid allignment of standart 125mm 8-hole oribital sanding discs on random orbit sanders. Works great for my Bosch GEX 18V-125. Take a look at the video below for a functional demo. Inspired by…

Pobrania
667
Polubienia
53
Ocena
5
P
PrintablesSzczepan

125mm Angle Grinder Wall Mount

Maximum width of the grinding wheel cover is 30mm.

Pobrania
644
Polubienia
48
Ocena
4,67
P
PrintablesMiguel Camba

Gridfinity sandpaper pads holder (125mm/5")

A 3x3x3 stackable gridfinity tray designed to store 125mm/5" sanding pads, with a notch to make easy grabbing it with your finger. With 3 units tall it holds between 10 and 20 sanding pads depending on the grit (the coarser the grid, the…

Pobrania
622
Polubienia
107
Ocena
4,71
P
PrintablesLiKa 3D

Gridfinity 125mm disc holder sandpaper

Gridfinity size 3x3 is 126mm so had to remove the walls to make it fit and not waste space. Update 221005 Minor tweak to measurments Added proper size files

Pobrania
516
Polubienia
84
Ocena
5
P
Printablesingegneredentro

125mm Angle grinder dust cover for generic Angular Grinder

125mm Angle grinder dust cover for generic Angular Grinder

Pobrania
463
Polubienia
84
Ocena
0
P
PrintablesLSK Designs

DeWalt sandpaper ⌀125mm storage - V2

V2 | Remodeled This tray has been made for more efficiency during sanding. This tray is for sanders with a ⌀ of 125mm with 8 hols. If you've suggestions or feedback, please let me know or comment below.

Pobrania
456
Polubienia
125
Ocena
4,75
P
PrintablesD00M

Y-Splitter Exhaust Duct Valve 125mm

Exhaust duct for my resin and cnc enclosure. Needed a solution to split in-line 125mm fan to both so I came up this this. Each inlet has a check valve with a lever. OD: 129mm ID:123mm Parts Needed: 8mm rod Installation Instructions: Print…

Pobrania
454
Polubienia
70
Ocena
5
P
Printablesmatej

Air Ventilation Check Valve / Zpětná klapka do ventilace 125mm

Printed from PET-G due to higher strength and UV protection. Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny…

Pobrania
447
Polubienia
79
Ocena
5

Gridfinity angle grinder disk holder - 125mm

Based on multiple regular and X-Lock disks, most of them should fit just fine. To be sure I added an additional 2mm tolerance to the 125mm spacing. Gridfinity Dimensions: 3x3x6U Remix The model was made with OnShape and should be…

Pobrania
428
Polubienia
77
Ocena
5
P
PrintablesPatrick_VS

Prusa Enclosure Spool Holder Rod / Arm 2KG 125mm

Prusa Enclosure Spool Holder Rod / Arm 2KG 125mm for big recycled spools

Pobrania
419
Polubienia
30
Ocena
4,33
P
PrintablesDimaAU

Rangehood adapter 150mm to 125mm

Rangehood ducting adapter 150mm to 125mm

Pobrania
417
Polubienia
19
Ocena
0
P
PrintablesMSCsaba

rugged box 125mm*125mm*60mm

The rugged box providing a durable and practical storage solution. Its compact size and sturdy construction make it ideal for tools, gadgets, or everyday essentials. Dimensions: 125mm x 125mm x 62,5mm Material: PLA Nozzle Temperature:…

Pobrania
394
Polubienia
106
Ocena
0
P
PrintablesHeinrich

125mm Angle grinder disc container

I designed this sturdy container for storing 125mm angle grinder discs, the discs slides securely onto the spindle in the middle and can be viewed from the opening on the side to see what discs are stored inside. Use supports for the…

Pobrania
391
Polubienia
50
Ocena
5
P
Printablesul90

Gutter feed pipe end piece / Dachrinne Stutzen Endstück Marley compatible 150 + 125mm

Gutter feed pipe end piece compatible with Marley gutters. 150 and 125 mm gutter size. Entstück-Stutzen für Dachrinne, Marley-Kompatibel. 150 und 125 mm Dachrinnen-Größe. Printed in PETG (with supports on the build plate), sanded a little…

Pobrania
364
Polubienia
37
Ocena
0
P
PrintablesTommy Monk

Sanding Disc/Pad Holder for 125mm / 5" pads

Storage for sanding disc/pad with label for grits 40, 60, 80, 100, 150, 180, 240, 320 Each slot is 24mm wide, enough for 15-20 pads Inspired by the design 5 inch Orbital Sander Disk Holder I suggest a brim to prevent any of the corners…

Pobrania
353
Polubienia
46
Ocena
5
P
PrintablesDavidKox

Bosch Professional GWS 18V-10 125mm grinder holder

Print laying flat with supports for more strength Atatch to wall with five 4mm screws

Pobrania
343
Polubienia
41
Ocena
4,8
P
Printablesmcko

QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs

QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs also for 200 cases and XL organisers

Pobrania
333
Polubienia
57
Ocena
5
P
Printablesbeardyname

125mm Sanding Disc Holder

125mm Sanding Disc holder for multiboard

Pobrania
325
Polubienia
67
Ocena
5
P
Printableszuim

Motor shaft adapter from 3mm (3.125mm) to 5mm

This is an adapter for 3.125mm to 5mm axles. To print it I recommend to start with default settings and increase/decrease flow depending on how well it fits (optimally it wouldn't have any noticeable play). There are three versions: Just…

Pobrania
325
Polubienia
17
Ocena
5
P
PrintablesIvan

Кондуктор, Насадка для заточки свёрл 135°/Drill Sharpening 135°. Короткий вариант для дисков 125мм/ Short version for 125mm discs

Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 135°. Насадка подойдёт для сверла диаметром до 10 мм, угол 135° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…

Pobrania
324
Polubienia
34
Ocena
0
P
PrintablesWaRHeaD

125mm Sanding Cup for Bowling Ball Resurfacing (1/4" Bit Holder)

This is a custom-designed sanding cup for bowling ball resurfacing and polishing . It holds a 125mm (5") round sanding pad using hook & loop (Velcro) stickers , keeping the pad firmly in place during use. On the backside, the cup is…

Pobrania
318
Polubienia
21
Ocena
5
P
PrintablesSethR1223

Stackable 5" (125mm) Sanding Disk Organizer

3-drawer storage unit to hold 5" (125mm) sanding disks. The drawers are removeable so you can take them to where you need them (the optional retention springs add tension and a soft stopping point when you pull the drawer nearly all the…

Pobrania
313
Polubienia
140
Ocena
4,5
P
Printableskilar p

body of the grinding wheel holder 125mm

Držák je určen k uchycení brusných, řezných a brusných kotoučů o průměru 125 mm. Je možné potisknout střední trn nebo lze použít i bez trnu, například s těsněním. Držák lze umístit do skříňky na nářadí nebo do zásuvky. Dá se i…

Pobrania
311
Polubienia
102
Ocena
5
P
PrintablesPanWiadro

Sandpaper pads holder (125mm)

Simple wall holder for 125mm pads. Each section accomodate around 50-100 sheets. Print Settings Printer: vking Rafts: No Supports: No Resolution: 0.25 Infill: 10% Category: DIY

Pobrania
310
Polubienia
47
Ocena
5
P
PrintablesBob837

Bosch GEX 125mm orbital sander mount

It has a little tighter fit, than the original.

Pobrania
306
Polubienia
41
Ocena
4,5
P
PrintablesDrJones

Minimalistic Elegoo Neptune 3 Pro spool holder, 70mm & 125mm (only 6g/12g)

I checked the other filament holders here, but all I checked have the wrong thread - at least for my 3 Neptune Pro (they have a thread pitch of 1.8mm – the correct pitch is 1.5mm), so I had to design my own model. Since I love vase mode,…

Pobrania
306
Polubienia
46
Ocena
5
P
PrintablesYoshi

DisKeeper 125 Multiboard - Modular Sanding Disk Paper Storage 125mm for Multiboard / Pegboard

The other parts of the original DisKeeper can be stacked on top of this one: 125mm Cover, 125mm Spacer or 125mm bins.

Pobrania
285
Polubienia
45
Ocena
5
P
PrintablesCeeBee

Drawer Handle with/without honeycomb 125mm/M6

Scad remix drawer dandle: Distance between the screws: 125mm Screw hole diameter: 8mm Screw head hole diameter: 13mm Material thickness (between screw head and base: 5mm Screw_Countersink_Angle: 90° Handle_Material_Thickness: 10mm Height…

Pobrania
281
Polubienia
51
Ocena
5

Stackable Orbit Sanding Paper Holder 125mm (5")

Stackable Orbit Sanding Paper Holder for 125mm (5") 8 hole Sanding Paper.

Pobrania
260
Polubienia
32
Ocena
5
Pobrania
255
Polubienia
34
Ocena
0
P
PrintablesTinnut

Gaslands 125mm Cannons

Two types of 125mm cannon for the Gaslands tabletop game. 1:64 scale (kind of) for matchbox, hotwheels and the like. Cannon number 1 seems OK with Cura using Tree support. Cannon number 2 can probably be printed without support.…

Pobrania
240
Polubienia
43
Ocena
5
P
PrintablesNiklas So

Holder for Bosch GWS 18V-7 125mm angle grinder

This is a model for a tool holder of the 125mm angle grinder Bosch GWS 18V-7 that can be screwd to a wall or a piece of wood. It might also fit for other 125mm angle grinder but I have not tested this. Please let us know in the comments…

Pobrania
237
Polubienia
23
Ocena
5
P
PrintablesMimimi....

125mm - Servo ventilation pipe flap with ESP-Web-Control

Material: PETG __________________________________________________________________________________________________________________________________…

Pobrania
230
Polubienia
70
Ocena
0
P
Printablesdsorm

125mm fan duct

For mounting standard 125mm ventilation hoses to flat surfaces. Fix to the surface using self-tapping screws for the corner holes, M4 size recommended. For airtight seal you can additionally use suitable glue between the surface and the…

Pobrania
228
Polubienia
20
Ocena
0
P
Printablesamlp

Gridfinity double pliers or one plier and one Knipex Cobra 125mm

Holds either one Knipex Cobra 125mm and one medium sice plier or tow medium pliers.

Pobrania
228
Polubienia
40
Ocena
4,33
P
PrintablesMike L

Vise Jaws 125mm magnet insert

These are my vise jaws I use on my 125mm vise. Printed in PETG and glued some 10mm x 2mm magnets to keep in place.

Pobrania
226
Polubienia
28
Ocena
4,5
P
Printablesstefanino

angle grinder disc storage (up to 125mm)

16th SEMPTEMBER 2025 - NEW MODEL AVAILABLE uploaded a new model with outside walls to protect discs from side impacts. printed in Amazon Basic PETG, 0.4 nozzle, 5 side walls to give some strenght and 1mm top/bottom surface. the result is…

Pobrania
219
Polubienia
33
Ocena
4
P
PrintablesMatthewGTaylor

Voronoi Small Parts Sorting Tray - 125mm square

Inspiration | I love the voronoi trays by @msmn and @olgapavlova_207132 but need a little bit different size and compartment count so I designed my own. Handy for small equipment repair to keep little screws and such in order. Features |…

Pobrania
219
Polubienia
58
Ocena
5
P
Printableswfvn

Bag clips 50mm, 75mm, 100mm, 125mm and 150mm print in place

[UPDATE: New, stronger version here: ] [Older version below] Print in place bag clips 50mm, 75mm, 100mm, 125mm and 150mm. No supports needed. Just print, take it from the buildplate/heatbed and use. Mine are printed with PETG 0.6mm…

Pobrania
210
Polubienia
19
Ocena
4,67
P
PrintablesMorten Hjellvik

Center tool for 125mm sanding disk

I needed a simple tool to assist in centering the 125mm sand paper on my Bosch and Ryobi Random Orbit Sander. Lining up all the holes perfectly was a small nightmare. With this tool, place the sandpaper on the pegs, then use the tool to…

Pobrania
206
Polubienia
30
Ocena
5
P
PrintablesTinWhistle

Orbit Sander Holder for Makita DBO180Z and similar 125mm

Holder for cordless orbit sander like Makita DBO180Z Print Settings Printer: Artillery Sidewinder X2 Rafts: No Supports: No Resolution: 0,2 Infill: 20 Filament: Extrudr PLA NX2 turqoise Category: Other

Pobrania
203
Polubienia
24
Ocena
5
P
PrintablesIkeBerlin

Sanding Disc Dispenser 125mm (stackable) + Interlay with Tag

I added also an Interlay with a tag. Now everything is well organized in my tool box :-) Many thanks to bomas_ulz for the original model!

Pobrania
202
Polubienia
41
Ocena
5
P
PrintablesChris_300m

Festool systainer 125mm sander holder

This is a remix https://www.thingiverse.com/thing:4603163 The holder fits ETS 125, ETS EC 125, Rotex 125. 0.25mm layer height supports yes 20% infill 5-6 perimeters filament PETG

Pobrania
201
Polubienia
29
Ocena
5
P
PrintablesJurriaan

Air tube connector 125mm

Connector for air tubes used by mechanical ventilation (like Itho/Duco/Stork). Made using FreeCAD See https://www.thingiverse.com/thing:4262757 for the FreeCAD project file.

Pobrania
198
Polubienia
17
Ocena
0
P
PrintablesFloFauli

Wall Mount for Orbital Sander Ø125mm

Wall Mount for Orbital Sander Ø125mm. Can be screwed on a plate with 4mm screws to put it on a french cleat

Pobrania
197
Polubienia
20
Ocena
5
P
PrintablesGsimon

125mm grinding disc wall holder

This organisation tool is to store apx. 10 grinding discs of dia.125mm on a wall or pegboard. Print Settings Rafts: Doesn't Matter Supports: Yes Category: Organization

Pobrania
191
Polubienia
16
Ocena
5
P
PrintablesMJM

Sy's Peglock - Milwaukee M18 125mm angle grinder

A 125mm angle grinder mount that uses Sy's Peglock system. (Printed without supports)

Pobrania
190
Polubienia
14
Ocena
0
P
PrintablesSven

AC Window mount Flange/Bushing with Hose Adapter (125mm)

I converted my monoblock AC to two hose operation, for this i needed a quick disconnect adapter to mount on my plastic window insert that already houses the exhaust hose of the AC unit. This works beautifully.

Pobrania
188
Polubienia
24
Ocena
5
P
PrintablesXaas

Sanding disk holder / Schleifscheibenhalter 125mm Durchmesser

Deutsch: Ich hatte auf Youtube ein Video zu einem ähnlichen Halter gesehen (aus Holz) und wollte das ganze für den 3D Druck designen. Halter funktioniert prima und man sollte die Scheiben direkt auf den Exzenterschleifer (einfach an den…

Pobrania
187
Polubienia
21
Ocena
4,5

Air Hose Adapter / 125mm > 180mm Abluftadapter

Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…

Pobrania
175
Polubienia
22
Ocena
5
P
Printablespixa

Adapter 150mm to 125mm hose (Schlauchadapter 150 -> 125)

Adapter to connect 150mm (Mars Hydro Fan 6") and 125mm hose.

Pobrania
168
Polubienia
14
Ocena
0
P
PrintablesTD3D

125mm orbital sander, sandpaper alignment, positioning helper

Compatible with festool sandpaper holder. Works with standard 125mm sandpaper

Pobrania
153
Polubienia
21
Ocena
0
P
Printablesscooter_magavin

125mm x 75mm tray with front lip w/small hex attachment for the HSW

125mm x 75mm tray with front lip for the honeycomb storage wall.

Pobrania
150
Polubienia
46
Ocena
5
P
PrintablesKOSERO

Pipe reducer (125mm - 150mm)

Simple pipe reducer. Originally made to connect an extractor hood to a ventilation duct, but handy for all sorts of ducting setups. The extractor - 150mm outer dia. Duct - 125mm inner dia.

Pobrania
143
Polubienia
8
Ocena
5
P
PrintablesMadSciSlack

Turkish Drop Spindle - 70mm, 100mm, 125mm

The simplest tool for spinning fibers into yarns. Available in 3 sizes and designed to print well on any printer without supports. Fully tested and verified to work great by a legitimate fiber arts expert. Very popular items.

Pobrania
138
Polubienia
51
Ocena
5
P
Printableswolffman

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1, X1C and P1P - 5x5 mm magnet - 125mm deep

the 125mm depth makes the the X1C or P1P fit on an Ikea shelf of 52 cm deep. use the standard setting of the original

Pobrania
133
Polubienia
10
Ocena
5
P
Printablesmark-m-aus-f

Multiboard Knipex 125mm / 150mm

Passend für Multiboard, siehe https://www.multiboard.io Halter für Knipex 125mm Zangenschlüssel - 86 03 125 Halter für Knipex 150mm Zangenschlüssel - 86 03 150 Mounting for Knipex 125mm Pliers Wrench - 86 03 125 Mounting for Knipex 150mm…

Pobrania
132
Polubienia
30
Ocena
5
P
PrintablesLookahead

Orbital sander 125mm pad helper

A tool that helps to quickly and easily attach the sander pad. Compatible with my Makita BO5031. Version 2: removed unnecessary ribbed section.

Pobrania
132
Polubienia
23
Ocena
4,8
P
PrintablesForTheVVin

125mm Sanding Disc Sorting Box

This model was made using Creo Student, thus I don't have an easily editable file. However I'm willing to modify if requested and will upload here. Tip for printing: Use large nozzle/extrusion width and big layer height for faster print…

Pobrania
130
Polubienia
21
Ocena
0
P
PrintablesTuxedo

Gridfinity tray for Knipex 125mm pliers

Gridfinity compliant, low-profile tray/holder for Knipex 125mm wrench pliers. Printed in PLA with a 0.4mm nozzle and 0.2mm layer height. I did not completely design this tray from scratch. I used schenklooza 's excellent Gridfinity…

Pobrania
128
Polubienia
22
Ocena
5
P
PrintablesBeKay1211

Skådis 7mm diameter gluestick holder (100 or 125mm long)

This is a holder for 7mm glue sticks (i.e. for Hoto's hot glue gun) that is compatible with Ikea Skådis. I designed them to be printed lying on the side - the small arch connecting the front and back walls shouldn't need any supports.…

Pobrania
127
Polubienia
23
Ocena
5
P
Printablesandrewtch

125mm ventilation pipe valve

Prints with PLA just ok. Fits plastic 125mm pipes. Fusion file included. Use two M5x25 screws (or longer) to put it together. Use supports for pipe and handle, lid best printed vertically.

Pobrania
123
Polubienia
26
Ocena
0
P
Printablesduub qnnp

125mm rounded box

This box is designed to store angle grinder or circular sander discs. by default is 125mm of diameter and 5cm of height of storage. Also I've attached the freecad file with some parametrized sizes, so it's easy to adapt it to other…

Pobrania
123
Polubienia
23
Ocena
0
P
PrintablesLordWiggle

125mm connector for window exhaust by ppi7ihp

I added a version 2 with a less steep inclination for a cleaner overhang

Pobrania
121
Polubienia
13
Ocena
4,5
P
PrintablesBeaverButter

HSW Knipex Cobra 125mm

HSW holder for a Knipex Cobra

Pobrania
118
Polubienia
27
Ocena
0
P
Printablesfoxylion

Organizer for Sandpaper (125mm diameter)

A simple holder for sandpaper 125mm diameter. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Notes: Print with a 0.4mm nozzle at 0.45mm line width.

Pobrania
116
Polubienia
9
Ocena
0
P
PrintablesRedGT500

VZBot 235 Top Hat 125mm Tall

Top Hat designed for the VZ235 that allows easy access to the extruder without removing the upper panel or opening the doors. Also prevents the CPAP and extruder harnesses from dragging on the top cover. This top hat requires several…

Pobrania
115
Polubienia
52
Ocena
5
P

Aufbewahrung Schleifgitter/Sandpaper 125mm

Einfache Lagermöglichkeit für Schleifgitter/-papier. Auf die kleine Ausbuchtung oben kann man, wenn nötig, noch die Körnung draufschreiben.

Pobrania
114
Polubienia
31
Ocena
0
P
Printablesshadow1117

EcoFlow Wave 2/3 Cheap Amazon 125mm hose Adapter

I designed this adapter because I needed a longer exhaust air hose for my EcoFlow unit, and EcoFlow doesn't offer an official solution. Instead of buying three sets of their expensive proprietary hoses—and still having to 3D print an…

Pobrania
113
Polubienia
6
Ocena
0
P
PrintablesDoomMeister

Hand Sander For 125mm Discs

#Sometimes machine sanding is not appropriate and you need to hand sand for instance thin finishes or plaster I wanted a way to keep the sizes of sanding paper I keep to reasonable number so I am reusing an idea I saw on the internets (in…

Pobrania
112
Polubienia
25
Ocena
5
P
PrintablesTacoTommy

60x60x125mm cup for honeycomb storage wall

Just a remixed cup thats taller i used it to hold zip ties and scissors works well and only uses 50g of filament. added a 2nd mounting point for more security. 0.20 height 2 walls 15% gyroid infil

Pobrania
111
Polubienia
24
Ocena
4
P
PrintablesKoyo

Monitor Riser/Stand (125mm, 130mm, 135mm)

Fine-tune the height of your monitor with this Monitor Stand.

Pobrania
109
Polubienia
9
Ocena
5
P
Printablesolekhal

Milwaukee 125mm M18 BOS125 orbital sander pad alignment tool

The original model by Lookahead is simple and effective. Unforunately it doesn't work with the Milwaukee M18 BOS125 orbital sander. The pins are a pinch to wide, and they are space to far apart. On the Milwaukee the center distance is 66…

Pobrania
106
Polubienia
24
Ocena
0
P
Printablesowar

Gridfinity 125mm disc holder magnetic

Remix of the original Gridfinity 125mm disc holder. Main differences: 1. added holes for 6x2 mm magnets into the base 2. added holes for 6x2 mm magnets on the stackable top 3. the “125” mm hole is now 131mm so my bigger flap sander discs…

Pobrania
105
Polubienia
15
Ocena
0
P
PrintablesDaire O Connor

Magnussen 125mm Vice Soft Jaws

Soft jaws to fit the 125mm Magnussen vice. Magnets are to be be fitted in the back to hold the jaws in place. F3D file attached if you need to adjust this design to your own vice. I have a horizontal groove through the whole softjaws to…

Pobrania
105
Polubienia
24
Ocena
0
P
PrintablesTHop3D

Grinding disk holder for 125mm disks

A simple tub that can hold 125mm grinding disks.

Pobrania
103
Polubienia
11
Ocena
0
P
Printablesmatthijsbos

Platform for Parkside 125mm disc sander

Extension platform for Parkside 125mm disc sander. I use it primarily for re-grinding of 25-degree bevels on chisels and plane irons. The platform serves as a surface on which a honing guide can rest. The material removal is less…

Pobrania
101
Polubienia
24
Ocena
0
P
PrintablesRaz Hsu

Sand Disk Holder for 5" (125mm)

5" or 125mm sanding discs holder Using minimal materials for printing, due to design considerations, may result in a final product that is not very aesthetically pleasing, but it is practical and sturdy. If you have any suggestions,…

Pobrania
101
Polubienia
17
Ocena
5
P
Printableskampfschläfer

Stackable Labeled Storage for 125mm Sanding Discs

Remixed the fine original a bit. I have a number of grits, but not that many sheets for each grit. Thus I shortened the pags. I also added a simple label with embosed numbers for the grit. You can change the text in PrusaSlicer before…

Pobrania
99
Polubienia
24
Ocena
0
P
Printablesexen904

125mm Lamp shade / Ikea Molnart x HÅRSLINGA E27 125mm Bulb

I designed it to fit the Ikea Molnart bulb in a HÅRSLINGA lamp stand, should fit other 125mm (GU125) bulbs as well. Gets hold in place by the bulb itself. Print settings I used 1.2mm Line Width (0.8mm Nozzle, with 0.4 you can go up to 0.8…

Pobrania
98
Polubienia
6
Ocena
0
P
PrintablesDiniz

Wall holder for cutting disks ( D=125mm, D=76mm)

The old holder for the cutting disks broke, so I had to reinforce the design a bit and make it more spacious.

Pobrania
97
Polubienia
8
Ocena
0
P
PrintablesCoenW

125mm / 5inch vise soft jaw grip with v-grooves

As the name implies, another vise soft jaw design, but for 125mm, including v-grooves. There's holes to insert d4x12.5mm supermagnets for easy clamping. The hight of the standard vise jaw of my vise is 20mm, so the softjaw is made to fit…

Pobrania
97
Polubienia
9
Ocena
0
P
Printablesosvatha

Noise filter for 125mm air vent pipes

We have an air ventilation system in our house, using 125mm diameter pipes. As the pipes are made of aluminium, they conduct noise quite well, and you can hear what's going on in another room perfectly…. I wanted to filter this noise out…

Pobrania
91
Polubienia
26
Ocena
0
P
PrintablesSheepard

150mm to 125mm Ventilation Hose Adapter – Universal Use (Growbox, Dust Extraction, etc.)

This is a practical hose adapter that reduces a 150 mm connection down to 125 mm. I originally designed it for my growbox setup, but it works just as well for any ventilation, dust extraction, or air circulation project where you need to…

Pobrania
90
Polubienia
19
Ocena
0
P
PrintablesAdam

Pegboard mount for 5in/125mm Knipex Pliers Wrench 86 03 125 - Magnetic

Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…

Pobrania
90
Polubienia
14
Ocena
5
P
Printablescewo

Sanding Block for 125mm Disks

Little mouse for hand sanding with ø125mm disks. *) QnD: Quick and dirty

Pobrania
88
Polubienia
21
Ocena
5
P
PrintablesAndreas Dybdahl

Hand Sander / 125mm Disc Sander / Drywall Sander including vaccum adapter

Added a .step file for modifying the dust port to your own dust collection system.

Pobrania
88
Polubienia
6
Ocena
0
P
Printablesniv

125mm sandpaper modular rack

A modular system for easy and accessible storage of sanding paper It comes as individual pockets that clip together so you can print as many as you want to fit your needs. regular version can hold ~15 papers Large will hold ~25 If you…

Pobrania
87
Polubienia
10
Ocena
0
P
PrintablesLavictus

Mavu's Transport box for Index cards, resized for 125mm cards & hinge hole circle -> tear reshape

Remix of the "Transport box for Index cards A7", resized to fit cards with a 125mm width. Also added a dubble tear shape to the hinge, allowing for easier hinge-fillament-strand insertion. Uploaded both the A7 size with the teardrop…

Pobrania
85
Polubienia
6
Ocena
0
P
Printablesekoscape

Spiral Planter Pot – 125mm Tall, 165mm Diameter (3 Versions)

Spiral Planter Pot – 125mm Tall, 165mm Diameter (3 Versions) A modern and elegant spiral planter pot with a smooth, flowing twist design. Measuring 125 mm tall and 165 mm in diameter, it's ideal for medium-sized houseplants, succulents,…

Pobrania
84
Polubienia
14
Ocena
0
P
Printablesnix

Ventilation Splitter 100mm/125mm to 125mm

This is a 125 millimeter outer hole splitter. It has two input ducts: one 100 millimeters and one 125 millimeters. An anti-return flap is recommended for each duct to prevent backflow.

Pobrania
84
Polubienia
23
Ocena
0