627 modeli
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Wydruk około 6,61 €–8,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a slim and configurable case for a Raspberry Pi 3B. It's not a case for systems that runs a heavy load for a long time, but my 3 Pis (pi-hole, openHAB, octoPring) do run with a temperature between 45°C and 55°C measured during…
Wydruk około 2,90 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple wall mount for the RPi4 armor case. Uses very little filament and prints quickly. I used PETG but PLA should also work. Has a nice fit and you can easily slide your Pi in and out after installing it to your wall. I printed the…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I modified the original files to add a honeycomb texture and a write. I don't have the MMU2, so i printed the things separately and then assembled. I upload the .gcode with 0.3 mm layer height, but for the screw, the write and the top…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder compatible with a blind shaker up to 74 mm or the original DF64 Metal Coffee Cup. Diameter: Up to 74 mm Attachment: Uses the original screw from the portafilter fork Features: Slot for a 10 x 1 mm magnet at the base Blind Shaker:…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…
Wydruk około 5,91 €–7,23 € nettoWstępna wycena jednego wariantu
Prints at regular scale but I recommend 150% for full detail. See below I tried to squeeze in all the things I saw in the show. Did you notice the wheel on the right?
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu
Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…
Wydruk około 4,55 €–5,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
This is a MTR3B radio case. In addition to use as a case, it can be flipped around and coupled with my micro-clipboard for handheld operation of the radio and a morse paddle while also being to log onto a piece of paper. The case is sized…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a far flying disc if you use 75+% Infill. Have Fun
Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu
4x Hirschmann SEB 2600 G M4 or any other connector with a 12mm installation diameter 2x m4 12mm m4 (fits into the screw holes for the rackmounts) I printed it without support
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small keychain, from 3BMTS
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…
A sleek, functional enclosure designed for the Raspberry Pi 3 Model B / 3B+ . High-performance cooling meets a minimalist, screwless design. ✨ Highlights Toolless Assembly: Precision snap-fit mechanism. No screws needed. Active Cooling:…
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a…
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
在转换到板版后，它更容易保存，可以作为礼物送给孩子，就像乐高一样。
(Update 3/27/2024) Added Pi5B Bottom/Lid. (Update 11/14/2019) Added Pi4B Lid. (Update 4/12/2019) Uploaded IGES model files for easier remix. (UPDATE 3.28.2019) Pi3B Case: improved structural strength by slightly thicker walls. Desktop…
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
Update 2: I've added multiple versions with slots for the camera cable and display cable. This means that now all possible usage combinations for GPIO, display and camera can be used. The .STL files indicate what slots are present in that…
A case for a Raspberry Pi 3B with a 5 inch display. I made this to be used with Octoprint and OctoDash... The display and Raspberry Pi just sit in the case and are held in place by the front cover, no screws. Front cover clips into place…
This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…
Raspberry Pi 3b case with holder for attaching to the frame of Original Prusa i3 MK3S+. The case has no screws and the case and the pcb inside is held together by placing it in the holder (the case can not be used on its own). The holder…
I needed a top case that supports the 3.5 TFT screen of my Raspberry pi 3b+ and also can be wall mounted. I use the bottom part of Sneaks' modular case “__raspi_bottom__1_05-RP3BP V75.STL”. ----UPDATE-------- rpi_3b_screen_top_v2.stl…
A modular, 2 part, 19-inch rack mount for the Raspberry Pi 2B, 3B, 4B and 5B devices. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
This case is inspired by two cases made by both MarioGi ( https://www.thingiverse.com/thing:3323346 ) and Harryb1991 ( https://www.thingiverse.com/thing:3735600 ). The Raspberry Pi 3B+ model was sourced from GrabCAD and made by David M (…
Vented Case, SnapTop... This case is built for a cooler CPU when active cooling is used... derived from the need to cool the Pi 4B, The case requires a fan for significant cooling. This case will not cool the sbc by itself, but the…
This 3D-printed case, slightly inspired by the Amazon Echo Show, is designed to integrate a Raspberry Pi with a 7-inch display ( link ), offering a compact and clean solution for various projects. The Raspberry Pi is mounted on the back…
Raspberry Pi 4B / 3B+ / 3B / 3 / 2 / B+ rack mount case, based on this great case from "dktosoch". you need to print: for RPi version 4B 1x "rackmount_4b.stl" 1x "case_top_4b.stl" 1x "case_bottom_4b.stl" for RPi version 3 / 3B / 3B+ 1x…
Measured a Pi 3B+ to design a case around. Included Fusion 3d export as well for anyone that wants to tweak. https://youtu.be/sjtyZTx15O0
NOTE This version is for a Pi 3/3+ See HERE for the Pi 4 version. I've seen many cases for mounting a Raspberry PI to the MK3 over the Einsy case. This mounts a Raspberry Pi 3B on the right side under the bed, which makes cable management…
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket, I had to turn it upside down. Accordingly I renamed both parts. In order to guarantee nevertheless the ventilation, I…
(Update 2/7/2023) Added a fan version for Pi3B Lid. (Update 11/23/2022) Added a fan version for Pi4B Lid. (Update 11/14/2019) Added Pi4B Lid. (the bottom part is same as 3B, so please use "Pi 3B Bottom".) (Update 4/12/2019) Uploaded IGES…
I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…
This case mount is a remix of the popular Rpi3b/b+ case by 0110-M-P. Other mounts I found used less ideal cases, and the mounting method wasn't the strongest. This version has all the great features of the original popular case, with an…
I could not find a pi 3 case that fit my needs. So this is what I made. (Should also fit a Pi 2 and will be testing for the new Pi 3 B+ as soon as possible.) UPDATE Version 2: I have made a new version due to some issues with version 1. I…
I remixed this from Malolo and Haz1's ideas for a frame mount for the RasPi right above the Einsy board. There was a Raspi 4 model, but not a 3B, so I snipped and clipped them together :) You can mount it using an M3x10 screw from the…
Triggered by a community request, I adapted the original case so that it fits a Raspberry Pi 3B +.Test prints are done by the community, too.You can find more details here: https://twitter.com/spikeinkent/status/1294704712101527553 The…
Sept 8, 2024 Update! With the release of the Raspberry Pi 5, I will be revamping the design to better work with the improved accessories that the RPi 5 offers (such as NVMe drives). These changes will require quite a bit of reworking,…
Yes, this is yet another Raspberry Pi case. Does the world need another case? Probably not. I really liked the 3030-mounted case from Coopey and thought the method of mounting via the 3030 extrusion slots was pretty sweet -- it was much…
This is a remix of 0110-M-P's case https://www.thingiverse.com/thing:922740 specifically made to install it inside my DIY 3D printer enclosure with fan taking the air from the room, not the one circulating in printer. Features: Cooling…
Note: This case is designed for the Raspi 3b+ if you need a case for the 4b it is linked here . This case is designed arround the Raspberry Pi 3b+ and provides for mounting a 30x30x7 mm 5V fan. Features * Case cover with OctoPrint Logo…
A case for the Orange Pi 3B. The case has a holder on the side for the Orange Pi external wifi antenna. My board is OP 3B V1.1.1 and it fits perfectly. May not be compatible with newer board revisions. 30/04/2024 V1 Update to include…
I needed a case for the higher profile waveshare PoE hat and so made this one. This was made so that the pi was completely covered while retaining access to all connections and allowing airflow. The PoE HAT model (B) case has no…
Staved off the convert to Octoprint for 5 months, wanted a slim adaptable case for various mounting positions in my enclosure. Loved the original Voronoi design but hate using hardware to assemble, redesigned for a snap fit enclosure and…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required
Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case remix for a 30x30mm fan.
Case for Raspberry Pi 3B in 3 removable parts Boitier pour Raspberry Pi 3B en 3 parties amovibles (sans vis).
Fits on this part: __raspi_bottom__1_05-RP3BP.STL in Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options von Sneaks I tried to avoid any black border arount the display without hinding any of the screen.
An enclosure for Raspberry Pi 3B+ board. It can be printed without any supports, raft e. g. Other RPi boards with the same layout of ports and connectors could be compatible with this enclosure.
Raspberry Pi 3(B/B+) compact ventilated fan case Compact ventilated fan case with 30mm fan. Snap fit top cover screwless design. Requires 1x 30mm 5V DC fan with fixing centres of 24mm. The fan fits to the top cover with 4x 12mm M2.5…
This is a Raspberry PI 3B case. This work was made from scratch using my PI Zero case but the original idea was based on this case: https://www.thingiverse.com/thing:3952272 I designed it with the following enhancement form the design I…
Messerschmitt Me-163B Komet
Case for raspberry pi 3b for mk3 using v-slot. You can use in left or right side of the printer. This version is for use with m3 25mm screw and nut. use supports for the holes of te screw and nut Print instructions Print in PETG with 25%…
This is a remix of Vince_Print's thing "Raspberry Pi 3B/B+ Case with Noctua Fan". As the title implies, it is a case for the Raspiberry Pi 3B+ intended to house a Noctua NF A4x20 5V Fan. I recently set up OctoPrint on a Raspberry Pi 3B+…
Note: Doesn't fit Raspberry Pi 4 - see the original model for that Be sure to use supports. A drawer insert to house a Raspberry Pi 3B and a LM2596 Step Down Converter. In the final model I added holes in the back so you can run the…
This model is compatible with the lego system.
Found this 2+ years old model in Printables. Unfortunately no stl-files on board, only step and f3d and a gcode as well. In order to modify thes files to fit my Prusa MK4 I could extract the step files and load them into TinkerCad. The…
This is a full size model of a 13B engine rotor of a Mazda RX7. This model does have supports on the bottom end, it is full scale and it will take up the print sheet on a mini be careful and try not to rush it. supports will be needed in…
This is first attempt to case for Orange PI-3B I will try to prin it soon and let you know how to fit. TPU legs for silence (if you using fan) I did order big fan so will update new wersion when it comes. See you @next design )
Loved the design of bigk251 but the case tended to rub against the cable going to the hotend. I wanted to make a quick and dirty remix for myself but after some refining I decided to upload it. The mount is designed to be compatible with…
A 6-inch Rack Mount for the Raspberry Pi 2B, 3B, 4B, and 5B. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Updates 02 August…
After printing @Carters Raspberry Pi 3B+ Case I needed a way to mount it so that I could pop it out easily if I wanted to update the RPi or do other diagnostics. So, I created this nice wall mount that can be attached with small screws,…
A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…
I printed it on ordinary cr6 se with standard PLA. I have used 0.16 layer for better resolution of marks and numbers.
A remix of a very nice case but with provisions for a PoE hat to be attached to the RPi.
This is my take on a case for an RPI 3B+ attached to a BTT TFT50 v2.1 screen with ventilation and access to the screen buttons. Useful for a remote klipper screen install, Homeassistant dashboards or anything a little touchscreen computer…
My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker. Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely…
Raspberry Pi 3B/3B+/4B Mount You will need x4 M2.5 screws with 3-8mm length to mount Raspberry Pi, x2 M3 nuts and x2 M3 screws. M3 screws length depends on where do you want to mount bracket Sizes were taken from…
Speaker Adapter Ring - 165 mm x 40 mm Sturdy 165 mm (6.5") adapter ring, 40 mm tall, for clean aftermarket speaker installs. Designed for VW Passat 3BG / B5 and commonly compatible with other VW/Škoda models from the same era (verify hole…
for those of us who enjoy building our own engines, this tool is meant to help aid in setting the correct clearance between the side seal and the corner seal. Things you'll still need: 1) drill press with locking table 2) drill press…
printed in pla-cf Orca slicer about 1hr print time 0.2 layer hight 2 walls 4 top & bottom shells 20% infill gyroid
Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…
1U 10 inch rack mount for your Raspberri Pi tested only with RPi 3b, should work with other model
A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.). An optional cable guide for the pi-cam cable. No screws needed. Everything snaps together.. There are holes to attach the Raspberry to the bottom part using…
This model includes Bottom part of case Mount to attach with Original Prusa Enclosure You will need a top part of case from Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case & Stands by Malolo To mount the case, you will need…
I can't find any decent enclosure for Adafruit 3.5 PiTft with Pi 3B. So, I decided to make one. To display MagicMirror stuff like weather, news feed, upcoming calendar events.. etc on my desk. You can find more information about…
Wanted to mount my Raspberry Pi 3b onto my bear frame, and had it in Malolo's case. Supports recommended except for M3 counter-bore holes. Attach using 2ea M3 x 8 SHCS and nuts of choice. The Open Offset has features to clear the 90…
This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the…
Case for Raspberry Pi model 3B
WARNING Use flush cutters to cut out a piece of the “Cover” that presses against the SD Card. When modelling this i did not account for the SD Card protuding, so the cover will press against it and that can break the SD Card Slot.…
A neat and easy to install octoprint enclosure to fit an Ender 5 / Pro Unlike other similar designs the base of this enclosure is separate from the upper half so installation is much simpler This design is to suit a Raspberry Pi 3B+ You…
Case for raspberry pi 3b for mk3 using v-slot. You can use in left or right side of the printer. there is a new version with holes for screws and slot for raspberry pi camera…
got a 1203bb dc motor speed controller to play with an see if i would be able to make a powerfeed for my mini milling machine. i have a few different ideas incase the others dont work out but which ever i can make feed my y axis the best,…
Shaker mount for MHW-3Bomber Blind Shaker, fitting the DF64 (Gen 2). Fits the lid as well just under it.
[GER / DE] Anpassbares Raspberry Pi 3B+ Gehäuse (Schrauben los) Dieses Gehäuse ist für einen Raspberry Pi 3B+ gedacht. Es sollte auch direkt schließen und brauch keine Schrauben. Er hat vorbereitungen für die Aufnahme eines 40x40x10…
Darealmoo made this really good and simple DIN-rail mount for Raspberry Pi ( Din-Rail Mount for Raspberry Pi 3B+, thing:3369750 ), I just did a small modification to be able to mount the Raspberry pi in a portrait way, so my Ethernet and…
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
I attempted to make the added holes fit with the original aesthetic of the vents. Note: The hole for the HDMI port in the cover photo is slightly larger than the one in the included model.
This is a Raspberry Pi 3 B/B+ case that was built to allow a Noctua NF A4x20 5V fan to be installed internally. The fan is mounted at a 5 degree angle to help push the air out of the vents located on the side. Print instructions [UPDATE]:…
Many thanks to Joe for the inital publishing of the case for the Pi3. The 3b plus have some parts at different places as well additional connectors. I updated the cover only. The buttom remain the same from Joe. It fits 100% and very…
I remixed this design to mount my 3.5 touchscreen and a Raspberry Pi 3B+. The mounting holes for the RPI are oversize so I could use some M3 screws I had here. You will either need to open up the holes in your PI or make the ones smaller…
This is a replacement part for the interior hood release handle bracket (VW part #1K1823633B), which connects the hood release handle and the bowden cable. If this part is broken, your hood release handle can't work properly, preventing…
This is a sleeve style case for a Raspberry Pi 3B+ to allow you to attach your Octopi server to the bottom of your Ikea LACK enclosure, or to the wall of a cabinet, etc. It makes it easy to mount or unmount the Raspberry Pi for updates or…
![[UPDATED] Raspberry Pi 3B/B+ Case with Noctua Fan](https://media.printables.com/media/prints/3914/images/300673_2b912598-9322-408c-874d-34f507b0cf49/card_preview_rpi_casewfangpiotop_v1.jpg)
