Liczymy pasujące modele…
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
This is a remix of "The HIVE" from Thingiverse. I printed out "The HIVE" but the connection was too loose for me. For this reason, I created a new model with 0,2mm tolerance and add different sizes and inserts. Print instructions 0,3 mm…
Once printed work gradually to break free the joints and make the box unfold-able Mini Version included. Print instructions Use Print thin walls feature in PrusaSlicer design for 0.20mm layer height
Holder for the Metabo METABOX system suitcase, which guarantees that you can safely attach the suitcase to any flat surface. When using a board at least 16 mm thick, it can be combined with the top mount on the Festool (TANOS) systainer…
Materials Needed: Fasteners: M4 Heatset Inserts: 20× (8mm length) M4 Countersunk Screws: 16× (10mm, for panels) 4× (16mm, for joystick) M4 Screws (flat head): 6× (10mm, 4 - for side panels, 2 - for handle) M4 Nuts: 4× (for joystick) M6…
This is a direct replacement/redesign of the stock PrusaBox hinge that allows the front door to swing open 270 degrees. I needed the door of my PrusaBox to swing open fully so I redesigned their stock hinge to allow this and made minor…
More stable table stand for LCD Box Mirabox N3 (Ajazz AKP03E) and Mirabox 293S (Ajazz AKP153). There is a recess at the bottom for a 120x80x2 mm silicone sheet. Also the angle of inclination has been slightly changed for more convenient…
Silica gel boxes 2 height options 9 mm and 15 mm without lid (Magnet holes 5 mm wide and 2.8 mm high)
This set up is made to use MMU2 or MMU3 on top of an enclosure, using a filament enclosure. With autorewind system made with printed springs, you don't need any buffer ! Features: Compatible with Prusa MMU2 and MMU3 System Auto-rewind…
Based on the Original Hexabox, this one takes only 77g of material and 3.5hours per unit vs the nearly 200g and 11 hours of the original. Modified in Fusion 360. Removed the majority of the interlocking surfaces as it is very thick and…
This is parabox, a rugged, customizable parametric box. You can of course just download the provided example 3mf file, but it's best to download the f360 You can edit the following parameters in the step file: The “ unit ” parameters will…
This is a 2 part adaptor plate than can be screwed to the modular control panels, and then this adapter plate along with the modular control panel is screwed to the Prusa Box so that the control panel is centered on the front of the Prusa…
So my sister commented on my TeaBox that she really likes it and would like to use something like that in her own kitchen, she also has a birthday coming soon so…… I modified my original design to better suit her style :) (also can print…
I really like the bento box v2 concept. What surprised me is the tiny HEPA filter that reduces the amount of air. I searched and tried the largest filter that would fit in the size of a bento box and I found: HEPA Xiaomi Viomi S9…
.Tja, was soll ich sagen :) Ein kleines Aufbewahrungsgefäß ('Fässchen') für Kräuter aller Art. Gedruckt in PLA, kein Support notwendig. Besonders schön find ich es im Zweifarbdruck. Die 3mf-Datei für den Anycubic Kobra S1 hab ich mal…
Note: Please see my remix https://www.prusaprinters.org/prints/155787-prusabox-enclosure-enlarged-buck-converter-box-wit for an enlarged version of this same design to more easily fit all the wires with the relay in the lid. This is a…
This is an enlarged version of https://www.prusaprinters.org/prints/152385-prusabox-enclosure-buck-converter-box-with-wago-ho. When I put all the wires into the original design with the relay and all the GPIO wires, the box was very…
This is the hinged version of my design PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…
Check out the latest variant right here → “ Prusa.Box ” Inspired by the awesome “Mailing Tube Cap” by Repkord, I want to design more boxes to use the empty cardboard parts from prusament spools. Hope you like it. I will do even more…
This is simply a modified lid of the buck converter housing in the Prusa Box enclosure, allows a 4 way relay board to slide in. Obviously some board sizes may vary, but most are of a generic size. Hopefully the photo also helps. I use…
Eigenschaften| Höhenverstellbar| Klemmung| Stellbereich ca. 15mm| Kompatibel mit dem Stahlplattenhalter unterhalb des Gehäuses (https://www.printables.com/de/model/78667-prusa-box-enclosure-expandable-steel-sheet-holder)| Benötigtes…
Stream Dock Cover (Mirabox, FHOOU, etc.) Size: about 130mmx80mm it seems a bit tight~ 30 degree Stand https://www.printables.com/model/1233264-stream-dock-mirabox-etc-35-degree-stand
Redesign of the modular front for the w1219 temperature controller housing, with switch for Raspberry Pi and longer internal groove for the w1219 circuit board. Orientate with the main face, face down on the bed. No supports needed. Print…
If you have one of the new (2024) Metabo vacuums, you will notice that the attachment method is slightly different from the standard Metaboxes. I have created a cleat set to help you attach a board to the top of your vacuum. Why would I…
This is a remix of my frame for the P5 panel. This frame is for a P4 Panel. It's fits the panel sent to Adafruit AdaBox members in box 16. https://www.adafruit.com/product/2278 I really like the look of these LED Matrix Panels. With the…
This is a changed design to my original vertical mount for a Logitech C920 which allows mounting the camera without removing the factory mount from the camera. The original mount was vertical which works ok, but it can vibrate a bit when…
Redesigned the awesome original to support larger tex bags from pukka for example and added "rails" on each side to keep multiple boxes together side by side. Boxes are also stackable. Printing instructions: filament PETG 0,16 mm layer…
PWM board housing to be used with Prusa Box modular front, allows proportional fan control. Print with buttons face down. You may need to add support to the end with the vent holes - specifically the long 2mm high ridge where the end of…
This is a combination of the original PrusaBox scrap bin and the E3D Nozzle holder from Paul_GD. All credits should go to the people who designed the separate files. I only combined them together. PrusaBox: https://www.printer-box.com/…
Šablona na montaž čiel pre šuflík blum Legrabox pravá strana
Mega Boxes are reworked loot boxes in Brawl Stars that contain 10 individual drop rolls . You can obtain them periodically through events, the Brawl Pass, or Daily Wins. Reward Contents Each Mega Box grants exactly 10 different rewards…
Pasta playset
The standard cable duct of the PrusaBox has two significant disadvantages. First, the click system can damage the isolation or break cables when squeezed (yes, it did happen to me) and second, it doesn't offer enough space in complex…
Stream Dock 30 degree Stand (Mirabox, FHOOU, etc.) Size: about 130mmx80mm i just enlarged it to fit the size of the remix Stream Dock (Mirabox, etc..) Cover https://www.printables.com/model/1233256-stream-dock-mirabox-etc-cover
I own a Prusa-Box with a RepBox. After building an RMU MK3, I wanted to mount the buffer on the outside of the case. I didn’t find anything on the Internet, so I did mine.
Love what Bera had designed, but I didn't love my position for the camera. I wanted as far back as possible to get as much of the build plate as possible, but the orientation of the first clip made that impossible. This remix takes Bera's…
Fast printing, created layer by layer to make the perfect design open around 70-80% 360°… with boomer look… New version 2 extendable in remix or follow this link !
Remixed the remixed remix of another remix ;) PrusaBox version, for the enclosure made by printer-box, with negative volume to create little cuts on the outer circle, so that it does not hit the plexiglass of the enclosure. If you have…
This is a set of stackable trays and small inner bins that can be customized to any size. You will need basic knowledge of OpenSCAD to get the size you want. The tray size is 150x150x37mm Inner space can be empty, separarated to smaller…
I also designed a hinged version PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…
Hi, Cup holder adapter for both Redbull & Coca-cola box. Fits in my Outlander 2016 mod PHVE. Outer Diameter: 79mm hight: 60mm Redbull D: 54mm Coca-cola: 67mm Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No…
This box can be extendable for the infinity and really fast printing.
i made this adapter to mount it on the rail for a raspberry camera https://www.printer-box.com/prusa-enclosure-webcam/
Simple stand for Metabox Alpha N850HJ laptop, might work with other Metabox/Clevo models Also there is gluing involved, if printed in PLA then recommend using super glue
Instabox for intax wide photos. Thay con be easily stackable. Added separators to categorize photos easily.
Summary Here are three similar puzzles with same challenge: pack the blocks inside the box - not that hard, get the job done and see the box is apparently full. Then there's one extra block with a different color, now add this block into…
When i integrated my new MK4 Printer into the Prusa-Box by Printer-Box i realized, that my xLCD won't fit into the Front of the Modular Control Panel from Printer-Box. The Mounting Holes wouldn't align, the USB Connector had not enough…
This model is a variation of Collin Hill's lid design to hold a 4 way relay under the lid. When I printed his design, my board was just a bit too wide to fit in the slots, so I modified the design so that on the right side, the relay…
For use as a Shelf on Top, Feet on the bottom, or a Shelf with backstop
This print is designed to allow mounting a Logitech C920 to the PrusaBox rail, without having to take off the mount that comes supplied with the camera. The original mount just slides into a square housing to hold the camera. The housing…
Printed 0.2 layer hight and no supports
I made this design a while back to get the tea cupboard more organized it has served me well for many years already. Fits somewhat tightly on the MK3 bed. The 3mf files included have the settings I used
This is a remix of https://www.printables.com/model/155787-prusabox-enclosure-enlarged-buck-converter-box-wit. The changes made were to add a square hole at the back of the case to allow using an external charger for the Raspberry Pi. I…
It's a common recommendation leaving the top window (or all doors) open while printing PLA. I don't think that's a good idea. Because PLA also scatters microplastics. Even if it may not be bioreactive, I don't want to have it in my lungs.…
This is a quick and dirty designed cover for the rear left corner of the PrusaBox to hide the cables. It is designed to use with my magnetic cable duct (see here…
The only change to this model compared to the original is the lower part of the box. You can use/print the cap, upper half, and tray from the original design.
English text below ______________________ Bei der praktischen Anabox bricht leicht ein Scharnier ab. Wenn es nur auf einer Seite passiert, hilft noch Tesaband. Sind beide ab, löst sich oft der Deckel und die Pillen fallen heraus. Hier…
This a replacement for the original ventilation grid to protect the Einsy motherboard from dust. You can install it even if you have the original grid installed to the inside or outside. You don't have to remove the original grid. Because…
A bottom stabilizer and top tray for the Hive Storage System
Remix of the 120 mm Hexabox Insert-1 to reduce Print Time, Material Usage, and increase Usability whilst retaining overall Strength and Original Style. Print with at least two (2) Perimeters and three tenths of a millimeter (0.3mm) Layer…
Anabox pill box is handy, the pills are placed in a separate compartments. There is a compartment for each day of the week. The problem is that when the box falls, a lid can break off. Thats what happened here. This model is a replacement…
This is a modified coupler for the modular control panel. The switch hole mount size is 19mm x 12.6mm to allow for larger rocker style switch. The holes were designed to fit these rocker switches. https://www.amazon.ca/gp/product/B07Y1GDRQG
As i was using the remixed design i found i could not only print 2 since they would constantly fall over and it didn't look nice when i just had them stacked 2 on top of each other. enjoy more customizability without support with support
I saw that Prusa had released the Buddy 3D camera and jumped on the opportunity! My current camera was acting up and this seemed like a wonderful solution. I have a Prusabox from Printer Box (wonderful company makes great enclosures) set…
Cable cover with integrated rail and magnets of course. Now you can mount whatever you want and you can change the vertical position in a blink of an eye. Instructions Print with supports ( Important! Take a look at .gcode ). I recommend…
Designed to have an INNER diameter of 170mm to fit Stabilo Pens (and maybe many more).
Corner cover (top rear left) to hide the cables going to the LED lights and the fan for the PrusaBox. Before After Print with rim and 15% infill. You should't need support, if you keep your fan blowing a 100% from layer 3 or so. See…
COVER FOR MMU3 CONTROL BOARD
This is my remix of a Teabox, it is large enough to fit packed teabags up to 67x78mm size
A small box for silica gel up to a minimum diameter of 2mm. The lid has snap fasteners so that it is tightly closed and cannot be opened accidentally. dimensions WxLxH: 50x70x52mm Please let me know if you need other sizes. If you like…
Combined with the bulkhead I made, (or you can drill a hole for a ptfe push-conect,) these rollers allow you to print directly from the spout of airtight cereal storage containers. 2 skateboard bearings and 2 m8x35 or 1/4inch bolts with…
NEW ENCLOSURE FOR MMU3 CONTROL BOARD COMPATIBLE MMU2 FOR PRUSABOX, HIGHER TO CONTAIN THE NEW ADDED BOARD, REDUCER MOTOR CABLE MOVED UPWARDS I ENTIRELY REBUILT THE OLD CONTAINER TO CONTAIN THE ADDITIONAL BOARD AND PUT A PASSAGE FOR THE…
I wanted this nice cover, but with better access to the buttons, hence this remix. If you want more protected buttons, please check out Cobrettj and use this model . Happy printing! If you like the thing leave a like or post a make. I'm…
Druck: Prusa MK4 PETG Düse 0.4 Schicht 0.2 ______________________________________________________________________________________________________ MONTAGE: “Version mit Rolle”…
I created this box in fusion360 as a gift for a friend and decided to share.. Also available for purchase at https://www.etsy.com/listing/292976475/green-3d-printed-jewelry-box-3d-printed?ref=shop_home_active_16 Print Settings Rafts: No…
2024-01-19: Ajout d'une version de la face arrière avec fixation pour le rail des boîtiers de Printer-Box . (absent des photos) Pour la version Wide (grand angle) du RaspiCam V3, je n'ai pas testé avec la version normale (je crois que…
Modification du guide PTFE pour le filament dans le caisson PRUSA BOX
My old silica containers for the Sunlu filamentspools didn't fit anymore because Sunlu now uses different refillable spools (the perforated ones, see picture). The inside diameter now is much smaller (62.7 mm vs ~72.8mm) so I had to…
After having my PrusaBox for a few days, I realized bits of filament like to get into the channel. They are made for the stock feet on the printer, and are only 1mm thick. When i get some time, I may redesign to make in 2 pieces to go…
1. Introduction As an owner of an MK3 Prusabox, I think that the new design of the MK4 left/right doors is a very good design and upgrade compared to the previous system of locking. It gives a more robust way to close the door and also…
Lifeinabox medical fridge stand to improve ventilation. Remove silicon inserts from original lifeina legs. Insert there stand. Add silicon inserts to the stand. Second part is the adapter for original lifeina bag.
This custom-designed case for the Streamdock Mirabox HSV293 Slim offers a sleek and functional alternative to the original housing. The original case’s inconvenient viewing angle made it difficult to see details from a seated position. To…
Summary Teabox/organizer 3x2 2x2 2x1 A box for storing standard-sized tea bags. The second box is suitable for storing/organizing any trinkets. The design is very minimalistic and does not require supports to use as little filament as…
This model is used to set your Mk4 Prusa display on the PrusaBox, with only two printed parts. Hardware 15x M3x6 screws 15x M3 square nuts Print instructions Print settings: PETG Support : no Brim/raft : no Fill : 20% or more Assembly…
When you are printing with your PrusaBox is important to maintain cool your einsy and RPi, at the beginning I was using the cooling duct designed by @colin but when I mounted the RPI It was not able to fix in the correct place, so I have…
Box, which looks like a hexagon.
Reduction which create perfect connection with small Metabo METABOX 63 XS and Bosch L-BOXX mini. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.28 Infill: 20 Filament: Aurapol PLA Video…
Aquarium container for plant cuttings with tool holder. Container for plant cuttings with tool holder, custom-fit for Juwel aquariums. Rio 180 Printing with supports
We couldn’t fix the downloadable feet on the Printer - Box site on the back of the Bear frame so I modified them so I could mount them. There were 2 screws to fix each foot on the frame, on the new version there is only one screw per…
The multiholder can be used as 5 spools holder either 5 1kg spools or 1pc 2kg and 4pc of 1kg spools or, can be modified (by printing a few diferent parts) to hold 2 kg spools and 3 5kg spools and yet it still fits the roof of Prusa box…
O.o A small box with its work tray to shape your anti-pain, anti-stress remedies... 200*100*58 without tray 200*100*70 with Fast Printing ________________________________________________________________ Une petite boite avec son plateau…
Beschreibung gedruckt Prusa MK4 IS PETG Düse 0.4 mm Schicht 0.2 mm STRUCTURAL (weitere Einstellungen nach Bedarf) 1 Bodenplatte 1 Deckel 1 Lüfter 45x45x10 (Sunon ME45101V1-000U-A99) 4 Zylinderkopfschrauben mit Innensechskant M3x8 4…
PiCam case, and two arms for top or bottom PiCam Boitier caméra PiCam avec 2 bras de fixation au rail nappe haut ou bas J'ai repris le fichier de PrusaBox du rail et de la fixation. J'ai dessiné deux bras et le boitier pour y mettre la…
Redesigned base plate panel to fit 30mm fan for Prusa Box modular front. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: any PETG Category: 3D Printer Accessories
The Filament spool holder for the BetaBox 3D printer is an essential accessory for any 3D printing enthusiast. It provides a reliable and secure way to store filament spools and prevents them from getting tangled as the filament is fed…
Temperature Controller Bezel for Temperature Control Unit SHT20 From Ebay See video for more details https://youtu.be/zsTEjOPljjs This is a temp controller from Ebay (UK/US) designed to fit into Prusabox, but can fit into any other 3D…
This Enclosure fitts an AsteraBox (ART7) Wifi, a 5V Powersuply and two neutrik connectors. The Enclosure keeps all buttons accessible. Partslist: 12x Heat set insert M3 10x M3x10 countersink screw 2x M3x6 Screw 2x countersink woodscrew…
Usefull when you want to remove printer from box… (Just cut cables and print this) PETG recomended…
![[Printer-Box] Prusabox Airsystem mit oder ohne HEPA-Carbon - Filter](https://media.printables.com/media/prints/849198/images/6626108_caa1f81b-1847-4b20-b4c8-b67186f3685d_f577ada1-17cc-4dc9-a216-f30ced92f882/61a.jpg)
![[Printer-Box] Prusabox Lüfter zu Elektronikbox](https://media.printables.com/media/prints/591671/images/4736166_a5a86971-de60-4c81-b1c5-0e52ce8a8233_a092db6c-91dd-4cc6-88ec-f77778666ca2/34.jpg)
