Wyniki wyszukiwania: add

Addams Family Thing

One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed

Basic Board + PSU Add-on Printable Parts

All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…

Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…

Morse Code Paddle / CW Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, I have been disappointed with the performance, cost, and size of cheap morse code paddles. So, I designed my own. For portable ops, or to…

SUP Drink Holder, Paddle Board

UPDATE: 7/22/2025 YETI Colster/Koozie model added in the files section for standard diameter cans. If you use PCTG filament only 2 perimeters and 15% infill are necessary, no box modifier. Enjoy! UPDATE: 7/19/2024 Skinny can model added…

Nativity Swaddled Baby Jesus and Manger Set

Swaddled Baby Jesus and Manger Set Like the manger. The Baby Jesus is so so.

MMU3 Enclosure addon

Description All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully. Depending on the option selected, you either receive all printed parts…

Ping Pong Paddle

This is a functional, full-sized ping pong/table tennis racket by [https://www.thingiverse.com/juholga/designs](Juho Jalava on Thingiverse). I've tweaked the design slightly to make it print well on my Prusa i3 MK3S+. It also serves as an…

AirTag bike saddle mount

This mount has been designed to conceal an airtag under a bike saddle, between the metal rods usually found under it. Why another bike saddle mount for airtags I know, there are numerous designs out already, exactly like this one, but all…

Greebles Part 2! Lights, Power units, Vents, Ladder, Control units and more!

Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…

RackRoller: Open Source Flange Roller Add-on For RepBox 2.3.1+ and RepRack System

Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…

Canoe 1/10 scale with paddles

Two seats canoe in 1/10 scale with paddles

Saddle Ruler Square with marking holes for woodworking inches

This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…

Tool Box for Prusa Tools (for adding upcoming Core One, XL or MK4S)

EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…

Shotgun Shell Holder / Side saddle (12 & 20 Gauge)

Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…

Prusa XL series: Antiresonance integrated steel sheet holder (curved) (Update: Added 3 sheet version)

I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…

IKEA Skadis Board Side Addition

These Skadis-like plates were designed starting from the Parametric SKADIS Board Generator by Xuis , and added holes and feet. One measures 200mmx180mm, the other measures 180mmx180mm. I needed to add these boards next to the Printable…

Advanced Filtration System Add-on Printable Parts

All printable parts for your Advanced Filtration System Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with Advanced Filtration System. All of the add-ons and community models can be found here . Print…

Schleich Horse Club - saddle holder

saddle holder for Schleich Horse Club, easy to print, easy to glue the gcode and 3mf file includes manual paint-on seams for (hopefully) optimal printing my other parts for schleich horse club:…

K6ARK Pico Paddle

BACKGROUND: The Palm Pico Paddle is infamous amongst portable CW operators for its small size, good feel, and cool retractable case. Unfortunately, they have been out of production for years, and they sell for much more than their…

Addams Family Thing Hand Wireframe

Inspired by https://www.printables.com/model/196949-spider-man-web-only-lets-retract No support needed !

Versatile Wall Mount for Garden Tools, Canoe Paddles and More

Fits Canoe paddles by handle or paddle Garden tool shafts up to 35 mm Garden tool heads (shovels, rakes, etc) D-shape handles Conveniently, it grabs most rubberized garden tool handles … Design Bore diameter is 35 mm, which should be good…

White LED Strip Add-on Printable Parts

All printable parts for your White LED Strip Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with White LED Strip All of the add-ons and community models can be found here . Print instructions You have…

Wall Mounted Tea Bag / Packet / Dispenser / Organizer / Caddy

Stores individually wrapped tea bags vertically with display bag visible. Easy to pull from bottom with generous fingerhole cutout at front and bottom. Holds approximately 1.5 boxes of tea. When stocking tea bags, reverse half of them 180…

Water Wheel Add-on For 3dPrintys Desktop Fountain

This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.

Old paddle-wheel steam boat with display stand (visual benchy)

I wanted to draw something after the bathtub boat which floats but still looks good on the desk. The idea of an old paddle-wheel steamer was buzzing in my head. You can see what came out of it. It took a few approaches but I am satisfied…

X-Maxx Big Paddle Tires

These tires fit on the Traxxas X-Maxx, which I think is an awesome RC truck: https://traxxas.com/products/landing/x-maxx/ If you want tires that last a reasonable duration, here are links to Traxxas tires that will last far longer:…

Scrub Daddy holder

It is recommend to print laying on back and add supports for fingers only. Will need some post processing. Edited to add Big Daddy, longer legs and forward lean for a larger base and better center of balance.

Waddle Dee (Kirby)

Hey it's the waddle dees from Kirby. Just got gifted the new 3D Kirby game. Really good game! Thought it'd be cool to model some of the little monkey guys. I'm very new to “organic” modeling lol so this one is a little rough BUT with the…

Horse Saddle (Easier Print)

If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…

Gutter Cleaner – Anti ladder - Garden Hose Adapter

Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…

Keychain (blank) can add what you want with favorite editor

Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…

Saddle for horse Schleich

Saddle for horse Schleich. Print from TPU filaments !!!!

THRUSTMASTER - TH8S Shifter Add-On

New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…

Mechanical Lock Add-on Printable Parts

All printable parts for your Mechanical Lock Add-on. All of the add-ons and community models can be found here . Print instructions You have two options: use the pre-sliced G-code and print it on your MK3S+ download the latest PrusaSlicer…

Bosch eBike Charger Wallmount (added removable plug)

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…

Single Lever Morse Code Paddle / CW Cootie Key

BACKGROUND: After designing a super simple iambic paddle for portable ops , I had multiple requests for a single lever version. So, here it is. I added a small snap-on cover to the design, but it's not entirely necessary. The hole in the…

Mini Garden Gate Planter/ Vine Ladder

This is a fun little planter I designed in Fusion360. Plant little vines, or flowers and watch them grow till you have a blooming tunnel of blooming flowers on crawling vines! The boxes are pretty self explanatory, the arch is a little…

Mascall Mill Mouse Trap With Ramp/Ladder

Printet on a Original Prusa i3 Mk3s+ using PLA 0.4 nozzle, 20%infill 0.3 mm layer hight

Bug-a-Salt Pump Grip Add-on!

I made this after I realized the one I liked and remixed was a replacement of the original grip. No parts removal or fasteners required. Position the two halves as shown in the pictures and thread the tube (tighten as hard as you can).…

CamelBak Drying Helper for 3l Bladder

A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…

Soldering iron add-on for 'Adjustable PCB Holder Tool'

Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…

Side-Release Buckle - Pin & Ladder Lock - 24 mm - fully printable

It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…

Prusa XL Tool Caddy

I printed the Tool Caddy with Overture Space Gray PLA on my MK4 with a 0.4 Nozzle, 0.2 Layer Height, 15% Infill. The total print time was 3 hours and 55 minutes without using Input Shaper because I typically experience issues with blended…

Hydration bladder drying insert

I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…

Sewing machine thread cutter add-on

You'll need: one break-of segment of a 9mm, 30° utility knife blade and some strong double sided tape or better: adhesive foam pads. These work perfectly. The blade segment is captured in the print, so you'll need to add a print pause in…

Zubehör für Tulpe / add-on for the tulip

Das sind Zubehörteile für diese schöne Tulpe: Fruchtknoten einfach und komplex zum Einkleben in die Blüte. Eine Verlängerung für den Stiel (ca. 35mm) Stecken Sie Filamentfäden in den komplexen Fruchtknoten. / This are add on parts for…

Service Key (elevator, maintenance room, electricalbox, fireman ladder)

Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8

Playtime Utensil Caddy

Introducing the Kitchen Sidekick, the ultimate 3D printed utensil holder designed specifically for play kitchens! Tired of scattered spoons and forks after an imaginative cooking session? This practical and customizable caddy solves that…

Kayak Paddle T Handle

I used the original paddle T-Handle on my old paddles but I recently bought some Decathlon itiwit two-part adjustable paddles and needed a male and female.…

Case for K6ARK Dual Paddle CW Key

I really like the K6ARK morse code key, but I have managed to break a couple of them by carelessly storing them in my kits. This case prevents the paddles from being touched while stored. It is designed to hold the key in the case with a…

Addams Family Munster Coach : Crash Derby Cars

Addams Family Munster Coach : Crash Derby Cars All versions have an extra version of just the car included. Remove if not needed.

Benchy Shrimp Boat Mod / Add-On

A no support addition to any Benchy model, prints fast and will turn a standard Benchy into a Shrimp Boat. You too can be a shrimp boat captain. Print instructions Print with a standard Prusa PLA profile, no support required.

Flange roller Add-on for (Un)original Prusa Drybox

This is an Optional add-on to the (Un)original Prusa Drybox. Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox. Note : All the files are also available for 20mm rods as an option. The filename…

Shopping cart key / Jeton caddie myShopi

If you like my work, don't hesitate to support me by paying me a ☕ https://ko-fi.com/fred2u

17mm hex RC paddle sand/snow tires

I don't have and flex filament on hand but it's supposed to snow so I threw these together and printed a couple in PLA. Used size and offset from my Arrma Typhon. They fit great but I haven't had a chance to test them out yet to see how…

Additional thumb keys for ZSA Voyager keyboard

These keycaps are meant to fit the ZSA Voyager keyboard to allow for more thumb keys. The default configuration for the Voyager keyboard only has 2 thumb keys on each side. I found that too limiting, so by eliminating the number row, all…

Fillet / Round Measuring add on for Vernier Calipers

Have you ever had to guess the radius (or diameter) of a curved object? This tool helps you measure a numeric answer to that question! Radius = Caliper Reading X 2.414 How to use: Insert the base of your caliper in the slot of the tool…

Ufo lamp - add STL file

Ufo lamp Size: height: 180 mm wide: 199 mm Need: Filament for ufo body of your choice. Lighting parts white filament. 2x LED strip Print instructions You must in prusa slicer click bar split to objects. And then the object will be…

SUP Paddel holder

Needed a way to store my paddles in a good way that also showed them off as I am proud of the sport I practice. Have not been able to find some that fit my needs and I thought it was a good way to combine the two things. Hope you welcome…

Wandhalterung für eine Leiter/ Wall bracket for a ladder

Dies sind zwei sehr stabile Halterungen, um eine Leiter an der Wand aufzuhängen. Eine Halterung ist innen ca. 120mm, die andere 140mm lang. Die Befestigungsbohrungen sind ausgelegt für 4mm Senkkopfschrauben. Translation: DeepL These are…

RackRoller: Alien3D Remix of Open Source Flange Roller Add-on For RepBox 2.3.1+ and RepRack System

I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…

Quick Caddy - Vase Mode

100% scale has a .8mm bottom (4 layers @ .20mm) If you scale up you'll need to add more bottom layers =)

Aeropress Go Caddy

Just because it has Go in the name doesn't mean you can't use it at home! This is a remix of @gmarsh23's excellent AeroPress Organizer Station. It fits on a Prusa Mini because I ditched the handles and made things a bit more compact.…

Original Prusa Enclosure (OPE) - Ferrite Core Mount for Basic Board + PSU Add-on

The ferrite core hangs around a bit, because the cable to the basic board is just too short to accommodate the core in the enclosure. Maybe the cables for the basic board differ, mine is a bit too short at this point. With the model you…

Nerf Red Dot Sight Addons

I printed the red dot sight that @ThompsonStudios made, but I felt like there were somethings that could be improved. My list of things that weren't quite the way I wanted is: The battery slot was not very good, and I wanted a slide in…

Screw Capture Plate Add-On for MMU2S

I was at step 12 of Prusa Knowledge Base | 6. Electronics and MMU2S unit assembly (prusa3d.com) and I had the spring disappear somewhere in my room (there is no spare in the kit). I want to help others from suffering the same fate. I made…

Desk organizer with drawers and caddies

Cool 2-drawer organizer with some little spots for pens and things. Prints with no supports. Print at 150% for big stuff

Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.

Add more slots to your Minimal Stand with this divider. The Divider is 5mm thick, please adjust the peg's length accordingly. Prints Settings: Supports: Tested with no support. Layer height: Tested with 0.2mm. Infill Pattern: 3D…

'Gem Rock' Mount for Your Articulating Dragon with Filled in Holes and Infill Added

I was having trouble getting this to print without infill using Overture PETG rock white. The bridging that was happening on the light holes were also giving me trouble. Since I wasn't planning to put lights into the bottom, I added some…

Host-swap SFF 2.5" caddy for FUJITSU PRIMERGY servers

You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…

Paddle Boat / Kayak / Canoe Can & Phone Holder

This Can and Phone Holder is designed to fit a can with a koozie <85mm. The phone holder slot is also 85mm in length and 15mm in width. It fits my Samsung Galaxy A32 with the case perfectly. My print of this variant of the design was done…

TZ Tape Caddy for Multiple Sizes

This a cartridge caddy for Brother P-Touch TZ and TZE tapes. It has been modified to have cartridge slots of two different sizes. The OpenSCAD file allows you to customize the number of slots and their respective sizes. This all sits on a…

Ratcheting Tube Squeezer / Addon

EN: I liked the design very much, had used a similar model before, which was a bit more delicate, but that's why the ratchet kept breaking off oftenly. This is unlikely to be the case here. However, as the key / the axle and ratchet wheel…

Splendor Photo Caddy Insert

A photo caddy insert for Splendor

IKEA Kura ladder passive light brackets

I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…

Werner fiberglass ladder tool caddy

There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder. Werner has updated the top plastic part of their fiberglass ladders and now has a…

Pool Ladder Hole Cover

We prefer to not use our hand rail at the stairs in the shallow end but we got tired of looking at the unsightly holes that fill with water, dirt, and leaves. So, we made these covers.

PolyDryer Additional Silica Box

An additional silica Box for the Polymaker PolyDryer. It can contain up to 30g Silca. Keep your filaments dry :)

Bestway Pool Addon, storre your Aquanet ready to use

Aquanets are large and usualy use space which could be used better. With this simple hook, you can it sore where's used.

Wall hook for aluminum extension ladder

Original print settings: ABS for weather resistance 0.2 mm layer height 10 perimeters 15% gyroid infill Supports everywhere to make sure the screw holes keep their shape Outer brim to avoid corner lifting Two hooks in the original size…

Star Fidget Paddle Toy

Use random seam position for paddle. A small paddle-style fidget toy featuring a star-shaped expandable mechanism inside. The flexible star structure can be shaken, moved, and compressed in different ways, creating a satisfying…

Storage Caddies and Tray for Small World Tokens

Storage solution for Small World race tokens where each race (and any additional tokens) have their own “caddy”. The caddy can be handed to the player when they take that race and discarded race tokens later returned to it, hopefully…

Ladder Leg Ends / Nožička žebříku

new ends of legs of small home ladder. Printed from PET-G with 3 perimeters and 100% infill.

3 Way Traction Additive Bottle Holder (more stable then no holder)

This is a basic traction additive bottle holder that can hold 3 additive bottles on your pit bench to make it a bit more difficult to tip over as well as when you get back to base you can hang it up on the tool wall out of the way ready…

Saddled Llama

Hello, Welcome to my profile, full of models and miniatures :-) I have a Saddled Llama for you for diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…

Jeton Caddie Penis

Castle Paint Caddy

I was looking for a fun paint caddy for my 1/2 oz paints. I couldn't find one I liked, so I made this. It should hold 15, 1/2 oz, bottles of paint. Dimensions are 164mm x 141mm x 105mm. The part will fit comfortably on an Ender 3 and a…

Bino Plate added V5

This is a simple plate that attaches to a tripod using a cheap 50mm Arca rail. I spaced the outer holes to fit a set of Bushnell Forge 15x56 binoculars. The center hole is a ¼” countersunk to attach the rail. I use the “Armageddon Gear”…

D'Addario tuner replacement part

This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…

Sheet Metal Hand Brake Back Gauge Add-On

Back Gauge Add-On The back gauge helps bending same lengths several times without the need of marking your sheets before. Just set the leg length, tighten the bolts and bend as usual. Just one sheet after another without interferring. You…

Ladder feet

My first project with fusion 360 inspired by others. Included two 3mf files, two gcode files plus the 360 fusion file to make the necessary adjustments. Back ladder feet: 41,8x23,5x45 Front ladder feet: 35,4x23,5x42,4

Modern Morse Paddle Finger Pads

One of the finest portable CW paddles you can buy is from Modern Morse . Aaron has made a truly fantastic morse code tool, handmade and designed in the US. Get one, you won't regret it. Then, consider swapping out the finger pieces with…

Bananagrams Photo Caddy Insert

This insert is designed to fit Banangrams in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and…

Ikea Lack Display Add-On for Funko Pop, Bearbrick, Toddler Sneakers, Collectibles

Do you want to display your collection, but LACK space on your standard (IKEA LACK) shelf? This add-on will allow you to present your figurines, children's shoes and other items from your collection in a non-standard way. Accessory…

Replacement Paddle Board Fin for Inflatable Paddle Board

Replacement Hydro Force Paddle Board Fin for inflatable paddle board.

Tsunami SUP Paddle Clip Set – Optimized for Tsunami SUP, Parameterized for Universal Compatibility

Introducing the Tsunami SUP Paddle Clip Set, designed to securely hold paddle pieces together for enhanced stability during your paddleboarding adventures. Optimized for Tsunami SUP paddles, this set features a parameterized design for…

CW-Iambic-paddle

CW Iambic Paddle (3D Printed) This is a mostly 3D printed CW iambic paddle that works well for everyday use. It’s not a high-end metal key, but it performs reliably and is a solid option if you want something simple, affordable, and easy…

Whirlpool Fridge Door Caddy

Small items,--particularly long tube shapes--do not store well in refrigerator door organizers. Standing on end is fine, but tall, thin items they fall over easily. This CADDY design is an easy solution that is not provided by the factory…

Shuttle Atlantis stand add-on

Inspired by the Atlantis display at Kennedy Space Center, Florida, here is an add-on for the 3D Shuttle Stand. Attached is the gcode to pause the print at layer 20 in order to change filament color. Also attached, is the NASA logo to be…