RAK19003 Case
Print one frame, lid and base and use two m3x8 screws to attach them together.
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
- Pobrania
- 32
- Polubienia
- 0
- Ocena
- 0
110 modeli
Print one frame, lid and base and use two m3x8 screws to attach them together.
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
This is a replacement for the Intellichem Jelly Jar Pentair 754000340. These things are impossible to get since the freeze that ravaged Texas. I gave up waiting on the backorder so I made a replacement. Everything to spec and the o-ring…
Wydruk około 28,72 €–35,10 € nettoWstępna wycena jednego wariantu
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
I never uploaded this model because I edited it quite badly but it fits.
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.
v2 Update : A little bit slimmer profile, and some model flaw fixes. Designed as a small profile mount for the Wisblock RAK19007 board from RAKWireless. This will allow it to be screwed to a basic enclosure grid mount found in a lot of…
RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
UPDATE - Also fits Well Pro AK12 . Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…
This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…
Modifications to fit a physically largery battery
This is a weatherproof (or waterproof depending on the version) case for a RAK19003 based Meshtatic node. Since the RAK19003 includes a Li-ion charging circuit and solar panel input port, the cases have room for a 2000mAh Li-ion battery…
A simple mounting plate for a WisBlock Base (RAK19007) inside a Unify Enclosure. Fusion 360 File included. Category: Electronics
This page and the models are a work in progress, I have some other versions of the models I'd like to add and there are some details I'd like to add to this page. To-Do List Add file name explanations Add BOMs for various versions Add…
PLEASE, NEVER REMOVE THE FOCUS WHEEL WHEN THE TELESCOPE IS POINTING DOWN! (on Maks and possibly SCs the main mirror can drop and be damaged) To prevent the rotation of the tube I use a zip tie, see image above. This is a stepper motor…
There are many much cheaper options out there , this fulfills my personal LARP needs. At it's core, this is basically a greebled rectangle. Fits in most pouches that can hold a MPU5, Streamcaster, AN/PRC152, etc. Has survived a couple of…
I really like the enclosures from @AlleyCat so I made a version for the RAK19003. The Bluetooth antenna is attached to the side. To mount the board and the switch, you’ll need short screws, or you can use the printed screw washers and use…
Mounts for components commonly used in Meshtastic outdoor installations utilizing a weatherproof box. These mounts are for: RAK19007 WisBlock Board Raspberry Pi 4 Heltec v3 coming soon. They are meant to be used with a box which uses a…
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
Here is a quick mounting plate for RAK19007/19003 that uses M2.5 heat inserts for mounting in a Zulkit junction box size 5.9" x 3.9" x "2.8. https://a.co/d/6S0OTV3
This is my self designed enclosure for a small portable node using RAK19003 . This version should take in all of the versions of RAK19003 but the LED locations are taken from version E (same as versions C and D). Following images…
Used with waterproof junction box containing 5mm grid . Holes: Sized for M3 bolts (30mm x 30mm spacing or "6, grid squares") Stand-offs: Sized for M2.5 threaded insert. Depth is 5mm. RAK19007 comes with M2.5 hardware for mounting
Set n Forget - Rooftop Solar Node Struggling to get the most out of your meshtastic portable node? Would you like to chat with other users from hundreds of KM away? Then this is the node for you! LIMITED BILL OF MATERIALS SET N FORGET…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
This is a remake from "NodeBrix Modular Case System" from "Open Source Country". Thanks for the great work!!! I only remaked the frame for the RAK19007 for n-type antenna and the front (and back) cover. Printed with PLA on Anycubic i3…
Designed to nicely fit into a pocket. Takes: Module: https://www.amazon.com/RAKwireless-WisBlock-Meshtastic-Starter-RAK19003/dp/B0DFMMTQZM Battery https://www.amazon.com/dp/B0B7N2T1TD There are two versions of the case. With external…
This is a replacement back battery cover with room for two 18650 battery cells. It effectively approximately doubles the device's stock battery capacity. Additional BOM items: Dual 18650 battery holder (parallel connections), I used…
Mounts a RAK19007 into the QILIPSU Junction Box 5.9"x3.9"x3.5" RAK4631 - $25: https://store.rokland.com/products/rak-wireless-rak4631-nordic-nrf52840-ble-core-module-for-lorawan-with-lora-sx1262 RAK19007 - $18:…
The RAK19003 is mounted with three M2.5 screws that come with the board. The lid snaps securely into place. There is a slot to insert the pcb antenna that comes with the RAK board and vent holes on the back to allow the temperature and…
WARNING: Requires modification to fit battery connector: Option1 - pop off battery connector plastic and solder battery wires directly Option2 - desolder battery connector and solder battery wires directly Option3 - options 1 or 2 plus…
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
Meshtastic Radio Case for WisBlock Base Board (RAK19007) This is a custom-designed Meshtastic radio case specifically made for the RAK19007 base board and RAK4631 core combo RAKwireless WisBlock Meshtastic Starter Kit US915 SKU 116016 –…
Sumary The JUGGERNAUT System features a set of enclosures and parts to integrate LoRa-Transceivers, Smartphones and Antennas into your tactical equipment setup by mounting the individual components to your Molle / PALS System. The…
Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…
📄 Meshtastic Node Bracket for 150 × 100 × 70 mm IP67 Case ✅ Compatibility Case Fit: Specifically designed for the 150 × 100 × 70 mm IP67 enclosure from Aliexpress I recommand using as it is the go to case for outdoor applications. IP67…
Clip to secure the IPEX-4/MHF4 antenna connectors used with the WisBlock Core modules RAK11162 and RAK3312 . The antenna cables used with the WisBlock Core modules RAK3312 and RAK11162 are easier to disconnect from the smaller antenna…
This is a compact solar Meshtastic node for outdoor use. Materials List: RAK19007/RAK4631 Meshtastic Board Battery with JST PH2.0 Connector (I used the Qimoo 115659 5000mAh 3.7v LiPo) 915mHz LoRa Antenna (I used this:…
I needed a simple model of the rak19003 so decided to model one from the board I already had it isn't super detailed but it is enough to make cases for this board
Couldn't find a base to elevate my mini pc for increasing the airflow. Just remixed the model linked below with the right dimension for my Nipogi Hyper H1 mini PC. It should also work for any mini PC with 130x130mm dimensions like: Nipogi…
Want a smaller version? Check out my other version for the RAK19003 and a 0.6W solar panel, it's about half the size and has all the same features. IMPORTANT! This model uses lithium batteries which can cause injury or death if…
3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…
Adds flush-mount BNC and SMA (optional) connectors to @stokey3D's design. BOM 1x BNC bulkhead ( amazon.com ) 1x SMA bulkhead ( amazon.com ) 1x 10,000mAh LiPo battery ( amazon.com ) 4x M3x10 (BHCS-preferred) 1x RAK19007 baseboard Designed…
Remixed @pdxlocs to allow for a battery to be placed underneath
This is an AK105 style front sight for the older AKM Cyma CM036. It may fit other Cyma AKs (or other brands) if they have the same screw attachment system. You will need the original screw (or the same) to attach the front sight under the…
Parts list included. I made some small adjustments to add the switch and external BT antenna. Tolerances are very tight to keep the model as waterproof as I can. Gaskets are printed in TPU, the rest was tested with PLA and ASA (shell…
This is an adapter to use RP-SMA and/or F connectors with the excellent RAK WisBlock case made by @stokey3D_252878, located here: https://www.printables.com/model/9289
I designed this for deploying Meshcore repeaters in a tidy, quick and repeatable manner. This mount is for attaching a RAK19003 PCB to the grid plate you can find on my profile. The PCB is secured using the M2.5 bolts which come supplied…
Plate is friction fit, once assembled - push it down. Also added a back plate for pole mounting, I recommend ASA for UV protection, also try to print it as solid as possible. For inside I used Bambu PLA, remember ABS/ASA shrinks. Items…
Small, portable RAK19003 case with room for RAK12500 GPS module and external LoRa antenna. Fits a 1500mAh lipo battery (50 x 35 x 8mm) such as this one. Use some double sided tape if you don't want the battery to move inside. Case is…
Me make these things just for me and you but no for you make money. No copy, sell, trade, or take my design without ask me first. If you want to sell them in a small way (not big business), talk to me here. Follow rules of Creative…
Simple mounting plate for a WisBlock RAK19007 for use in enclosures that provide only two M4 attachment points, 100mm apart on center. No supports needed.
Dust cover for the user button on the TonyG RAK19007/RAK5005-case. The fit is pretty tight, so I ended up putting the button inside the dust cover before putting the assembly into the hole in the case. Print this in some soft TPU, install…
So this is a box i made to mount my Metastatic node… The 3D printed parts form the Base and Lid that should be printed in a suitable weather resistant material, I used PETG but ASA would probably be best and a Gasket that should be…
RAKwireless RAK14000 enclosure with buttons The idea for this enclosure is based on a customer inquiry for a simple LoRaWAN end node for demos. It supports a RAK19007 WisBlock Base Board , a WisBlock Core module (any core module) and the…
Want a bigger version? Check out my other version for the RAK19007 and a 1.2W solar panel, it's about twice size and power and has all the same features. IMPORTANT! This model uses lithium batteries which can cause injury or death if…
Added flaps to the lid. Removed holes from the case. Modified screwholes to take M2 threaded inserts. Thank you for the author for sharing the step files!
Sunfilter bracket for Solarfoil (Astrosolar...) with case to store it. Category: Physics & Astronomy
This is a small stand I made to mount a RAK 19003 board with a TP4056 Lithium Battery Charging control board into a HarborFreight solar flag pole. Light to use as a Meshtastic Solar Node....There are mounting holes to screw down the RAK…
This is a LabStack module for a RAK19007 LoRa board with 1.3" OLED display for Meshtastic, Meshcore, or Reticulum RNode. It is designed to mount in a 2U LabStack Mini bracket. The board mounts on the backside with the screws included in…
2 mounting options for a RAKWIRELESS RAK19007 board One with stands and one with M2.5 screw holes. This was an exercise in taking the schematics for the RAK19007 and creating a simple mount. I don't own the board, and may not have one…
A small enclosure for an ultra sonic based sensor using the WisBlock Modular System. With two screw openings to fix the enclosure on a wall. Measures distance to the closest object in the field of view and sends the measured distance over…
@BigTuna_3247047 did a great job making this file. I remixed it to work with the Rak19007/5005. Works great.
I recently bought these boxes for meshtastic nodes. I made a mounting plate for inside the box for my Lora mesh nodes using the 19007/19004 mainbords and a seengreat solar power board for an 18650 cell. The solar board has the screw holes…
Conjunto de anillas para instalar una cola tipo Vixen en la parte superior del tubo skywatcher mak180, una de las anillas dispone de soportes para anclar soporte para buscador. El conjunto esta impreso en ASA. Se recomienda imprimir la…
Material: PLA or PETG - PETG may be better for high brightness due to better heat resistance. Supports: Yes Orientation: Side, or anything you like since supports are critical here. Affiliate Link for Official US RAK Wireless dealer:…
This is a model to make a water resistant case for a RAK based LoRA node. Its made to have a n-type chassi mounted connector on top that is sealed with a o'ring and a 145x145mm solar panel on the front. It has build in cannels for cable…
RAKwireless WisBlock RAK19001 Education Stand Building something different every day with RAKwireless' WisBlock Modular System. Ever thought it would be nice to have a protective cover, but still have easy access to the WisBlock Core,…
https://www.printables.com/model/286662-rak19003-case-for-meshtastic I made the above case for my Rak19003 meshtastic radio, and my friends said it looked like an explosive detonator. So i thought that the case looked like the same shape…
Building something different every day with RAKwireless' WisBlock Modular System???? Ever thought it would be nice to have a protective cover, but still have easy access to the WisBlock Core, Sensor and IO slots? Then this little stand…
The RAKwireless WisBlock Modular System offers an extension cable to place sensor modules apart from the Base Boards, the RAK19005: This cable does not have any option to secure it on the Base Board or on the sensor module. It does not…
A small enclosure for an indoor sensor. Only 48 x 51 x 22 mm (w x l x h) small, with enough space for a RAK19003 Base Board, a WisBlock Core module and up to 2 sensor modules. Easy access to the USB port and space for a 500mAh battery.…
A spacer ring that goes between the original bottom and top shells of an AceMagic AK1 Plus (Intel N95) mini PC and fits a quiet 120mm fan blowing down onto the board. It fixes the chronic thermal throttling of this machine without giving…
The RAK10706 Signal Meter for LoRa is a basic signal meter. It works in both LoRa P2P and LoRaWAN mode. It uses an OLED display and a single-button controlled UI for settings changes. In addition, it can use an SD card to log the test…
Another small sensor enclosure. Can be used with LoRa, LoRaWAN, Meshtastic or other LoRa networks. Supports a small battery up to 500mA (30 x 35 x 4 mm). Easy wall mount USB access for recharging Required parts: RAK19003 WisBlock Mini…
A 10" rack insert for the Meshtastic RAK19003. Includes two (2) SMA ports. Print PLA or PETG, your choice. No supports.
The RAKwireless WisBlock Modular System offers an extension cable to place sensor modules apart from the Base Boards, the RAK19003 VE.
Build a door open counter and alarm sensor with WisBlock Reed relays are often used for contactless switching in many applications. The reed relay is normally open, but when a magnet is getting close to it, the relay contacts will close.…
Want a large wall clock that is easy to read? This enclosure is for a 16x16 matrix LED wall clock. Built with the WisBlock RAK3312 Core Module (Espressif ESP32-S3) and the WisBlock RAK14012 LED Matrix Module. The firmware can be found in…
This mount was remixed to fit in Vladimir Varzaru's 10 inch rack 1U 3xRPI mount using nano's RAK19007 WisBlock Base Board Mount to mount a WisBlock RAK19007 board in a 10 inch server rack.
This print allows you to mount a Attema AK1 IP65 cable junction box to a pole. It slides into the holes in the back and can then be secured with zip ties through the holes in the print. For example, the middle one can be used to secure…
The RAKwireless WisBlock Modular System offers an extension cable to place IO modules apart from the Base Boards, the RAK19008. This cable does not have any option to secure it on the Base Board. This clip solves the problem. The clip…
Remix of a model by N7TRX. Stealing some of their formatting and wording, as well. Still does not require any supports. In order to use the internal mount for the bluetooth antenna, you have to remove the adhesive foam from the antenna,…
Support extender compatible with the standard mount of the Eureka AK10 Pro, designed for the small brush and the Italian wall plug. Print Info Material: PLA Infill: 10%
I needed a case for a RAK4631 on the RAK19003 baseboard to fit to the back of a solar panel. This model has standoffs for the three screwpoints on the RAK19003 and an inset to put the bluetooth aerial, and a hole to put a aerial…
A remix of the RAK19003 case originally designed by N7TRX , adapted to fit a 3000mAh LiPo battery (size 974958) . Notes: Ultra-compact: Space inside is tight, so take care when routing your cables. Snap-fit: At 100% scale, the shell snaps…
Outer size 65.2 x 60.2 mm, 12.2 mm thick Parts base_plate.stl plus one lid: lid.stl (flex antennas inside) or lid_sma.stl (SMA whip antenna) Screws 4 x M2 x 6 mm countersunk (flat head). M2 x 8 also works. Magnets 54 mm MagSafe magnet…
Same as original except for larger 8000 mAh battery (from Rokland) purchased with 190007 WisBlock kit. Mods and parts: Changed the radio board mount to be vertical so plugs didn't interfere with larger battery. Updated mount points for…
This is my first remix. Based off of the 19003 case made by N7TRX this inner shell features a external on/off switch for conserving battery and going full Covert, and USB-C port cord protection. Switch is wired into the negative wire on…
The new RAK13702 LR2021 Evaluation Kit from RAKwireless supports both 2.4 GHz and subGhz LoRa frequencies. For evaluation, one might want to test with different antennas and changing antennas from the small IPEX/MHF antenna connectors is…