Wyniki wyszukiwania: antenna

Sortowanie

3108 modeli

P
PrintablesAdam Kimmerly

Elecraft AX1 / AX2 Antenna Bipod Clip & Knob

The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…

Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
532
Polubienia
63
Ocena
5
P
Printablesf1nsr

The same CLAMP for 3 dimensions of yagi antenna elements and 2 dimensions of square boom.

Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…

Wydruk około 0,72 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
426
Polubienia
26
Ocena
5
P
PrintablesAdam Kimmerly

Arrow Shaft Yagi Antenna Bracket

This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
409
Polubienia
45
Ocena
0
P
PrintablesAdam Kimmerly

10 m (28 MHz) Moxon Antenna

BACKGROUND: A little bit of gain can make a big difference in an HF radio antenna, and one of the simplest and smallest gain antennas is the Moxon Beam. Now you can easily build yourself a portable one for the 10 m band with some 3d…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
265
Polubienia
77
Ocena
5
P
PrintablesSteve

IC-705 Antenna Stabilizer

This is a design I whipped up to provide stabilization for the BNC connector on an IC-705. It utilizes the ground lug and the little handle thing on the back to provide 2 points of solid connection. Print instructions I printed this with…

Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu

Pobrania
189
Polubienia
20
Ocena
5
P
Printablesoktkas

70cm Yagi Antenna with SDR

Simple & lightweight Yagi antenna for the 70cm band. Developed in conjunction with the ‘Touch The Universe’ project . Required hardware 3.2mm aluminium welding rods 4mm brass welding rod 25mm PVC pipe ~3mm self-tapping screws superglue /…

Wydruk około 4,35 €–5,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
173
Polubienia
51
Ocena
0
P
PrintablesDomes

Mini-Whip Antenna Case

Simple casing & mount for Mini-Whip antenna from AliExpress, link here .

Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
128
Polubienia
18
Ocena
5
P
PrintablesJonathan Kayne

K6ARK Antenna Winder for Female BNC (V2)

This is the next revision of the K6ARK antenna winder for the female BNC connector version. Adam showed off his new design in a livestream and I used that to create this version. This was designed using the FreeCAD Link Stage Branch. I…

Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesOuwekaas

Funkamateur MiniWhip antenna holder for fishpole

Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…

Wydruk około 5,12 €–6,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
73
Polubienia
3
Ocena
0
P
Printablesmurphy

GMRS Twin Delta Loop Antenna

This GMRS antenna is constructed using a 3d printed form and easy to acquire material from a hardware store. The antenna has better than 11 dBi gain in the forward and rear directions and will aid your handheld GMRS radio with an external…

Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
66
Polubienia
13
Ocena
0
P
Printablesf1nsr

Isolation mount for a 40 meter 1-element HY-GAIN dipole antenna

Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…

Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
62
Polubienia
4
Ocena
0
P
Printables_KaszpiR_

Multisensor ESP32-WROOM-32 NodeMCU with Camera hole and extended builtin antenna

About: Remix of Multisensor ESP32-WROOM-32 NodeMCU ESPresense by teaser : Added camera hole (10mm hole) Expanded area for extended builtin wifi antenna on modern nodemcu boards that protrudes outside of the dev board Wider hole to connect…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
1
Ocena
0
P
PrintablesTRE Di Print

FrSky X8R Support (antenna 90°)

Use Velcro or double-sided tape to secure the electrician's cable ties to the model and, if necessary, provide greater security. for the antennas fixed with heat-shrink material.

Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesAn12854

Dual WiFi Antenna Bracket - regular PCI(e) edition

PCIe/PCI bracket to fit Wi-Fi/Bluetooth antennas from an M.2 wireless module. Recommended PLA with supports as PETG sticks to supports with the force of god.

Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesDlteck2000

Support for Lorawan 4G GSM Antenna

La base magnétique n'étant pas assez forte, j'ai réalisé ce support qui permet de visser l'antenne avec une vis de M5 à tête fraisée. Antenne disponible ici :…

Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesSaveitforparts

Arrow Antenna to Discovery Drive Adapter

Adapter to mount an Arrow dual-band antenna on a Discovery Drive azimuth/elevation rotor. The handle of the Arrow goes in the slot, and the base plate bolts to the Discovery Drive's rotor plate. I used a prototype Discovery Drive with…

Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesBenoît Lussier

Antenna wire protector

2 kind of wire protectors designed on Fusion 360. One to be used for a wire offset. A second one for a 90 degree wire turn. Printed with Materio3D PLA material.

Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
2
Ocena
0
P
Printablesmatěj m

Funny Bone Antennae Headband

Are you tired of being a boring human? Do you need a goofy accessory for your next cosplay or Halloween party? 🥳 Presenting the Bone Antennae Headband! Instead of regular alien feelers, you get two stylized cartoon bones sticking out like…

Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
6
Ocena
0
P
PrintablesDokkie

Wheel for shortening television antenna VILLAGE MOON–V900

Small wheel for shortening this TV antenna . It's used on campervan, but can be used anywhere. Might need a bit of modifying, because the teeth don't allow the antenna to stay paralel. Printing instructions Layers: 0,20 mm but doesn't…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
5
Polubienia
0
Ocena
0
P
Printablesm3x

uConsole micro antenna 0.2 mount

external micro antenna mount for uconsole

Pobrania
1936
Polubienia
99
Ocena
5
P
PrintablesDL2MAN

VHF UHF Moxon Antennas

This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…

Pobrania
1625
Polubienia
136
Ocena
4,7
P
PrintablesScottmi

Antenna End Insulator ("Dog Bone" Insulator)

Antenna end insulator, for attaching end of wire antennas to support lines. Designed for print-ability, structural strength, minimal chafing of wires and lines. When printed at 70% scale (recommended size) or more, exceeds typical support…

Pobrania
1578
Polubienia
168
Ocena
5
P
PrintablesAdam Kimmerly

K6ARK Wire Antenna Winder

Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…

Pobrania
1490
Polubienia
141
Ocena
5
P
PrintablesChristian Undso

H1 Big Case for Heltec V4 running Meshtastic for standard & bendable antennas

Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.

Pobrania
1422
Polubienia
138
Ocena
4,8
P
PrintablesJ_mason555

Elegoo Centauri Carbon Lid and plate holder (3 and 5 plate variants). with options of with hinge, without hinge and with mounting point for wifi antenna extension.

There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…

Pobrania
1327
Polubienia
171
Ocena
4,93
P
PrintablesRaspberry Pi

Weather satellite receiving station antenna

Full tutorial to be found on the RAspberry Pi website .

Pobrania
1214
Polubienia
93
Ocena
0
P
Printablesstenborg

Mammotion Luba RTK antenna wall mount with winter cap

I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…

Pobrania
1168
Polubienia
67
Ocena
5
P
PrintablesDET-Man

Buddy3D Antenna GUARD (for CORE One, +, L, INDX)

The original Buddy3D camera for the 🥰 Prusa CORE One comes with the Wi-Fi antenna freely hanging outside the housing 🫣. This not only makes it look unfinished but also leaves the antenna vulnerable to damage. The flexible part of the…

Pobrania
1121
Polubienia
128
Ocena
5
P
PrintablesAdam Kimmerly

Ultra Light Wire Antenna Winder - V1.0

Need a way to store your lightweight wire antenna for Summits on the Air or Parks on the Air activations? This winder fits 70 feet of 26 ga wire or smaller for a 40 m end fed halfwave or random wire antenna built from one of my kits from…

Pobrania
1004
Polubienia
99
Ocena
5
P
PrintablesSeii-FPV

Seii-Radiomaster Boxer Antenna mod adapter v7 PETG

Seii-Radiomaster_Boxer_Antenna_mod_adapter_v7_PETG - I took Bikernickmn's model and just polished that widest square piece because it was damaged in the original file. Also, whole file is not properly centered by the original author and…

Pobrania
1001
Polubienia
37
Ocena
5
P
PrintablesGrumpyMakes

Segway Navimow Antenna mount

Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…

Pobrania
974
Polubienia
54
Ocena
5
P
PrintablesKR Design

Honda Civic antenna cover

Material: Pet-G or ASA 275 or ABS

Pobrania
969
Polubienia
70
Ocena
5
P
PrintablesMichi Kipsy

Ground Plane Antenna 868MHz Meshtastic

Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…

Pobrania
962
Polubienia
143
Ocena
5
P
Printablesswitchboard.op

Moth Antennae Headband

These are designed to slip onto a thin metal headband. Printed in PLA at 100% infill with print thin walls enabled.

Pobrania
952
Polubienia
190
Ocena
4,33
P
Printablesyong3dprint

Shark Fin Antenna Cover

I designed this Shark Fin Antenna cover to replace the OEM degraded Antenna Bee sting in my Mitsubishi ASX. Printed in Dark Silver which matches with the car color. Print in PTEG for heat and weather durability. Printed without support.…

Pobrania
952
Polubienia
72
Ocena
5
P
Printablesunhild

Moxon antenna 868MHz Meshtastic

Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .

Pobrania
832
Polubienia
95
Ocena
5
P
PrintablesCraftyFPV

GepRC Mark5 ELRS Antenna Mounts

I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…

Pobrania
831
Polubienia
40
Ocena
0
P
Printablesandreirusu99

GepRC Mark5 GPS, vTX and RX antenna mount

The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…

Pobrania
823
Polubienia
41
Ocena
5
P
PrintablesMeshtasticCmoi

Dipole Antenna Support Case

3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.

Pobrania
821
Polubienia
58
Ocena
5
P
PrintablesFAYRON

QUADMULA Siren F3 - IMRC Ghost Antenna Mount

A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…

Pobrania
730
Polubienia
5
Ocena
0
P
PrintablesDsignR

SMA Antenna Mount

Bracket for mounting an SMA antenna socket for different applications. In my case an ESP8266 with u.FL socket and external antenna. Socket with external hex locks by itself into housing. Therefore easy mounting No supports necessary.

Pobrania
723
Polubienia
111
Ocena
5
P
Printablesthall72

Lego Compatible (3957.dat) Antenna 4H with Rounded Top

This model is compatible with the lego system.

Pobrania
710
Polubienia
41
Ocena
5
P
PrintablesYorikMol

SpeedyBee Mario 5 Single Antenna+GPS+XT60

I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…

Pobrania
706
Polubienia
20
Ocena
0
P
Printables3dprintguy

QRP dipole antenna for ham radio, or short wave listening

All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…

Pobrania
703
Polubienia
130
Ocena
4,83
P
PrintablesSartor
Pobrania
702
Polubienia
47
Ocena
0
P
PrintablesDjiM

FPV Helical antenna 5.8 GHz

3D printable 5-loop and 6-loop helical directional antenna to be used on 5.8GHz FPV video receivers (e.g. FPV goggles). We reached more than 600 downloads! If this model is helpful for you, a quick ❤ will help other makers and pilots find…

Pobrania
691
Polubienia
75
Ocena
5
P
Printablesdem34

N Scale Antenna Mast

Designed to be Printed on an FDM. Make sure Detect Thin Walls are enabled. There is a bevel in the sides to make location of assembly easier. Make sure the model is printed flat on the build plate with the thickest part of the bevel down.

Pobrania
680
Polubienia
93
Ocena
0
P
PrintablesBittins

Orange Pi Zero 3 Case with Antenna Mount

I loved the design of the slim snap-together OrangePi Zero 3 case by Gerber but I also wanted the antenna mount from the case by TheParanoidEngineer , so I combined them :) Make sure to route the antenna cable through the notch in the…

Pobrania
669
Polubienia
70
Ocena
5
P
PrintablesTim O'Brien

The FPV Antenna Project: Universal FPV Drone U.Fl for O3/Vista/walksnail,etc +VTx

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…

Pobrania
656
Polubienia
144
Ocena
5
P
Printablesunpaved studio

DJI O3 GPRC Mark 4 Upgrade with Antenna, GPS and Crossfire Holder

Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…

Pobrania
650
Polubienia
37
Ocena
0
P
PrintablesAdam Kimmerly

K6ARK Wire Antenna Winder - UL Wireframe Model

Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one, then parsed it down to just a wire frame for minimum weight. Dimensions are…

Pobrania
640
Polubienia
52
Ocena
5
P
PrintablesSergey Parshin

O4 Pro Airunit mount for Mark4 frame (camera + antennas)

Camera mount - print in PETG. Antenna mount - print in hard TPU (70 D or harder) and use cable ties to fix antennas in place. Supported camera ange is from 0 to 30 degress (the mount is slightly in frame at 0 degrees). When printing…

Pobrania
611
Polubienia
9
Ocena
0
P
Printables3DSistem

Dipole antenna center

Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal

Pobrania
609
Polubienia
94
Ocena
4,67
P
PrintablesFAB1150

TTGO T-Beam V1.1 case for big GPS antenna

This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…

Pobrania
586
Polubienia
49
Ocena
4,8
P
PrintablesSwiftyTheFox

Antenna Winder

I created this antenna winder for SOTA activations, but of course you can use if for non-sota activities as well. The winder serves a second purpose as a strain relief for an endfed antenna and the paracord used for fixing the antenna to…

Pobrania
573
Polubienia
91
Ocena
5
P
PrintablesAdam Kimmerly

Wire Antenna Winder with Female BNC Clip

This remix adds a clip for a Female BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio…

Pobrania
572
Polubienia
53
Ocena
0
P
PrintablesBrettH

Antenna Mast/Pole Hitch Receiver Mount

If you don't have a printer, I do sell them(velcro included) on my site for cheap with free shipping for those in the USA. https://shop.ke9bos.com/ This is something I made for my ham radio adventures. This has been really helpful for me…

Pobrania
571
Polubienia
93
Ocena
5
P
PrintablesMartin Labis
Pobrania
559
Polubienia
55
Ocena
4,91
P
PrintablesG_L

XIAO ESP32-C6 Zigbee Router Case (Split Lid, SMA External Antenna)

This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…

Pobrania
552
Polubienia
52
Ocena
4,67
P
PrintablesAdam Kimmerly

Wire Antenna Winder with Male BNC Clip

This remix adds a clip for a Male BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio operations,…

Pobrania
549
Polubienia
51
Ocena
5
P
PrintablesHands on Katie

Mammotion Luba RTK Antenna Wall Mount

Custom wall mount for Mammotion Luba - this fits all their models (AWD 1000, AWD 3000 & AWD 5000). Greatly enhances the performance of the RTK antenna if you have buildings that are blocking the transmission of the signal.

Pobrania
542
Polubienia
67
Ocena
5
P
Printablesdansh

LilyGo T-Embed CC1101 back shell with external antennas and power switch

By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…

Pobrania
541
Polubienia
43
Ocena
5
P
PrintablesTim From Sales

Radio Antenna Wire Winder

I modified my Packtenna EFHW to work on 20m and 40m with a extendable link. I got the idea from a K8MRD video, but didn't care much for how he had the organization (both wires on the same winder). I've got this winders profile setup to be…

Pobrania
535
Polubienia
56
Ocena
5
P
PrintablesIoT Me

FullWave Compact QFH Antenna for 433Mhz band,

So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…

Pobrania
533
Polubienia
46
Ocena
5
P
PrintablesScottmi

Antenna Guy Insulator (Guy wire strain insulator)

Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item. Designed with 10mm hole for your line or wire. Easy to scale to whatever size desired. I like 100% and 80% for my needs. If…

Pobrania
511
Polubienia
84
Ocena
5
P
PrintablesGBO35

Mammotion Luba/Yuka RTK antenna wall mount remix

I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…

Pobrania
508
Polubienia
27
Ocena
5
P
Printablesdreimal_8

RAK Starter Kit 19007 enclosure for sma antenna - meshtastic / meshcore

Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…

Pobrania
501
Polubienia
53
Ocena
4,4
P
PrintablesJoshua Kaiser

Ham Radio Antenna Insulator

Insulator for wire antenna. Can be used as tension relief on the feedline side and as insulator on the supporting side. Also works as apex insulator for delta loops, inverted L, etc. If using 14 AWG knotting the antenna wire is not…

Pobrania
492
Polubienia
109
Ocena
4,67
P
Printablesok1cdj

Dual Band Satellite YAGI Antenna

Original design by by LY3LP, recalculated by George M1GEO Dimensions and design: https://www.george-smart.co.uk/antennas/dual_band_satellite_yagi/ How to print: Element holders - 4 perimeters 20% infill no support - 6 Pcs Radiator holder…

Pobrania
490
Polubienia
73
Ocena
0
P
PrintablesMikkoP HAM3D

SMA antenna table stand

A small antenna stand for propping up antennas with sma connectors. Set up your sdr or handheld radio antennas in a better position easily with an sma-antenna cable and this simple stand. Printing: Printing upside down is recomended to…

Pobrania
486
Polubienia
67
Ocena
5
P
PrintablesEmemell

uConsole micro antenna 0.2 mount

A remix of the uConsole micro antenna 0.2 mount model for a countersink screw plus a mount for the other corner.

Pobrania
484
Polubienia
30
Ocena
5
P
Printablesmichal

Case for ESP32 with external antenna

Slightly remixed case for a ESP32 with external antenna (works great with ESP32-WROOM-32U). I have messaged the original author and he's OK with posting new model. Added ventilation holes on both sides and modified the lid, which is now a…

Pobrania
475
Polubienia
29
Ocena
5
P
PrintablesAnthony Walley

Yagi / Moxon antenna parts 2m/70cm

I designed the mounting parts for this field-assembly antenna to be strong yet easily taken apart for transport. The “boom” is 20mm pvc electrical conduit, and the elements are 6mm solid aluminium rod. The mountings consist of a threaded…

Pobrania
474
Polubienia
59
Ocena
0
P
PrintablesJan_OM2JU

Tiny Portable EFHW Antenna

The proposed solution is antenna winder which integrates UNUN in the center and contains two compartments, in first one thin coax cable such as RG174/U of length 2.5m and ended with BNC connector is wound, while in the second one the thin…

Pobrania
469
Polubienia
83
Ocena
5
P
PrintablesAaaaah1

Segway Navimow Antenna mount 90°

Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters

Pobrania
460
Polubienia
15
Ocena
0
P
PrintablesazDave

QFH Antenna for Ham Radio Satellites

A QFH antenna has an omnidirectional pattern with enough gain to operate either on the uplink or the downlink for communicating through the various amateur radio satellites that use the 2m and 70cm bands. These 3D printed parts can be…

Pobrania
453
Polubienia
61
Ocena
0
P
PrintablesOK1HRA

Parameterizable 3D print Antenna rotator in OpenScad

From May 2026 availabe mount for motor rev F5, TNX OK1GOD! Four predefined sizes (S,MS,M,XL) M size max torque 2200 kg/cm (215 N/m) without destroy Included terminal for install motor from cordless drill Without nuts (tapered holes) DXF…

Pobrania
453
Polubienia
81
Ocena
5
P
Printablesgrajohnt

Quadrifilar Helicoidal Antenna for 1090 MHz (ADS-B)

This is a remix of the Quadrifilar Helix Antenna by @ jhsandell for 1090MHz (ADS-B) The following updates have been made: The 'bug' that jhsandell noted where the code was using diameters rather than radii has been fixed This version…

Pobrania
446
Polubienia
49
Ocena
5
P
Printablesdreimal_8

Xiao nRF enclosure for sma antenna meshtastic meshcore

Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Switch and charger board from amazon - see photo… The tabs for the screws must be removed from the switch. Simply bend them…

Pobrania
443
Polubienia
80
Ocena
5
P
Printablesps915

ImpulseRC APEX Antenna Mount + GPS (M8N) + Crossfire

Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…

Pobrania
443
Polubienia
18
Ocena
0
P
PrintablesazDave

QFH Antenna for 435 MHz Satellites

This is a 3D printed spiral support structure for the wires of a 435 MHz QFH antenna. The antenna provides a dome-shaped hemispherical pattern that is suitable for operation (transmit or receive) on various amateur radio orbiting…

Pobrania
434
Polubienia
28
Ocena
4,5
P
PrintablesLoopFPV

Speedybee Mario 5 Dual Antenna GPS WS-M181 XT60

Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support

Pobrania
427
Polubienia
30
Ocena
0
P
PrintablesAdam Kimmerly

40 m Vertical Antenna Loading Coil for 5 m (17 ft) Whip

Note: these build instructions are preliminary - I'll try to update them with more detail when I have time, but I wanted to get these out there. BACKGROUND: 5 m telescopic whip antennas have become readily available and very popular…

Pobrania
425
Polubienia
75
Ocena
4,75
P
PrintablesBerwin

GEPRC Mark5 GPS antennamount

GEPRC MARK5 GPS MOUNT

Pobrania
420
Polubienia
23
Ocena
5
P
PrintablesSA0PEJ

QFA (QFH) Antenna, 70cm Band

General After reading an interesting artikel about Quadrifilar Helical Antennas I got inspired and wanted to print one The creation of this antenna described in detail at QFA Antenna . Models and simulations are available on GitHub:…

Pobrania
420
Polubienia
71
Ocena
5
P
PrintablesEmemell

Antenna SMA Connector Spanner (Wrench)

A small spanner (wrench) for SMA connectors for SDRs etc. Obviously it's not super-strong, but it's useful for tightening or undoing the connectors to finger-strength in tight spaces.

Pobrania
415
Polubienia
66
Ocena
5
P
Printablestimn

ESP32 DevKitC case with wifi antenna

This is a box to hold an ESP32 DevKitC board with a grid board to solder on connectors or some electronics. The board itself is meant to rest on pin headers so that it remains removable. There is a hole for an external antenna. To use…

Pobrania
414
Polubienia
38
Ocena
5
P
PrintablesMike Roberge

AX1 antenna Clamp Bracket

I print mine in ASA filament. You can also print it in Petg. Infill needs to be 100%. You will need a BNC female to female bulkhead connector 1 M4 x 18mm bolt with nut and washer 1 M4 x 16mm bolt with nut and washer 1 M4 thumb nut 14 gage…

Pobrania
410
Polubienia
57
Ocena
4,67
P
PrintablesOxmstr

SMA female antenna cap cover

A 1/4-36 thread with 5.5mm depth with added 0.05mm of thread clearance.

Pobrania
410
Polubienia
30
Ocena
4,75
P
PrintablesKI7QEK

Elk Log Periodic Antenna Handle

This is a more compact handle designed specifically for the Elk 2m/70cm log periodic antenna, which I designed to be smaller than the PVC-based handle that it comes with from the manufacturer. This makes it handle a lot more like the…

Pobrania
405
Polubienia
29
Ocena
5
P
PrintablesKB9RLW

A jam proof pulley for antenna masts or other projects. Includes clamps for Max Gain Systems masts and 1" O.D. US conduit.

A jam proof pulley for antenna or other projects. The hing mount and the pulley mount have a matching diamond interlock that allows the pulley to be mounted in one of two orientations, depending on your needs. There are also mast top…

Pobrania
404
Polubienia
289
Ocena
5
P
PrintablesC4 Designs

Amateur Radio Dipole Antenna, Guy Rope Winder

Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…

Pobrania
398
Polubienia
82
Ocena
5
P
PrintablesBlueskies

Heltec Wireless Paper Enclosure For Meshtastic ( SMA Antenna)

Released on 16 Feb 2024 by Blueskies . Improved version on 22 June 2024 These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family…

Pobrania
396
Polubienia
50
Ocena
4,5
P
PrintablesazDave

3D Printed L-Band Helical Antenna

This is a design for an L-Band Helical Antenna support structure (scaffold) that prints completely flat, thus avoiding the printing issues that can crop up with other designs featuring tall skinny elements. It is based up on the…

Pobrania
392
Polubienia
31
Ocena
5
P
Printablesalexb

Asus WiFi Antenna Holder with Cable Management for Louqe Ghost S1

It allows you to roll up and hide the excess cable, and to snap its 4 feet into the top ventilation grid.

Pobrania
388
Polubienia
52
Ocena
4,8
P
PrintablesAshutosh Mishra

GEPRC Mark4 VTX SMA Antenna Mount

Standoff dia: 6.15mm vtx hole dia: 6.5mm height: 24mm

Pobrania
388
Polubienia
11
Ocena
5
P
PrintablesJ4DP

TPU DJI O4 Antenna + 21mm GPS Mount for Speedy Bee Mario 5

This is my attempt at making the new DJI O4 Air Unit compatible with the SpeedyBee Mario 5 frame and an HGLRC M100-5883 GPS module. The mount should also fit a variety of 21mm GPS modules, though I haven’t tested it with others. It must…

Pobrania
384
Polubienia
18
Ocena
5

TC3EC 433MHz Moxon Antenna

TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…

Pobrania
376
Polubienia
39
Ocena
4,75
P
PrintablesRexodus

10dB EU (and US) LoRa/Meshtastic/ISM PE5I Yagi Antenna

UPDATE: Pole mount added. PE5I Meshtastic Yagi! Ideal for direction finding or long distance links. Features: Compact Yagi for 869.525 MHz. 10 dB gain 38.69 dB front/back ratio Only 60 cm long Portable Extremely easy to (dis)assemble…

Pobrania
375
Polubienia
120
Ocena
5
P
PrintablesJohn Cortese

RT-95 Manpack Rails and BNC bulkhead antenna mount

Manpack Rail System for RT95/AT-778UV – 3D Printable File Hey everyone, I’m excited to share my latest 3D design—the Manpack Rail System for the RT95/AT-778UV ! As a passionate Ham radio operator and off-roading enthusiast , I wanted a…

Pobrania
372
Polubienia
43
Ocena
0