1442 modeli
Simple stand originally designed for a Ubiquiti UniFi AP AC Pro Also confirmed to work with: UniFi Access Point WiFi 6 Pro U6-LR-US Possibly others? If it works on other models drop a comment and let me know! Snap fits into existing holes…
This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…
I wanted to mount my Ubiquiti camera to the underside of my roof, but the pitch made it hard to get the right angle. This shim is designed for an 8 degree slant with a ½ inch (12mm) lift. This levels the camera and makes it easier to get…
IMPORTANT: The mounting hole distance are slightly off with the official bracket, thought I didn't notice much difficulty during installation, so I can't be bother to correct those. But do let me know if it is necessary for your usage.…
Table Stand for UniFi Access G2/G3 Readers: Finally a way to have a tabletop reader for adding cards to UniFi access. No more readers strewn across your desk. The Idea: Make a table-top stand, based around the existing aluminium bracket.…
Adapter allowing you to turn any UP Sensor into a leak detector. Materials: Qty 2, M3x6, Hex Head Bolt Print Settings: No Supports 0.25mm Layer Height NOTE: Use bolt with flat head to ensure contact with pins on UP sensor, see product…
Ce conduit de refroidissement personnalisé améliore le flux d’air autour de la buse pour la Comgrow T500 équipée de l’extrudeur Biqu H2 V2S . 👉 Le support intègre un positionnement optimisé pour le probe de nivellement automatique (type…
Printed with PLA+, 0.28 layerheight, 15% filling and minimal support. Has mounting hole at the bottom to fasten the Accsoon with regular 3/8 bold
The bracket was designed for a roof with a 50deg pitch. It may not work on really shallow roofs. It prints without supports. As there are no fillets between the bracket and the plate (in was a hack in a hurry, there is an issue with…
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
This is our newest airless basketball filament made specifically for use with the BIQU PLA-HR filament: ( https://shareasale.com/r.cfm?b=1890927&u=4425865&m=118144&urllink=&afftrack= ). With the right print settings, this basketball…
This is a BIQU H2 mount for the base Ender 3/3 Pro and the Ender 3 V2. It comes in 2 variants, depending if you prefer to mount one or two 5015 fans. Key features designed for the Ender 3 and the Ender 3 V2 [new] modular, small,…
An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape. I have included Three versions of this model. Open mount: Uses less…
An unofficial wall arm mount for the Ubiquiti Unifi U6 Enterprise, U6 Pro, U7 Pro Max and U7 Pro. The holes on the arm align themselves with the holes marked with “A” in the metal face plate “U-PRO-MP”. I've also shared the .step file if…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press the a little so they can compress and enter the mount, after…
Please give it a ❤ if you like it 🥰 Video : Please give it a ❤ if you like it 🥰
The Cloud Gateway Max gets hot! Do not print in PLA!
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
Replacement mounting plate. Indices on the inside for easy orientation. Small grooves in the mounting slit which prevent spontaneous dislodgement whilst still allowing for tool free attach- and detachment.
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
Just a rescale of the OG model to fit the UP 6 pro mounting bracket holes—they lined up perfectly and secured easy with short M3 screws. + nuts.
I am using it with U6-Pro, but should also work with AP AC Pro. Instead of snap fits to attach a backplate this remix has 4mm holes so screws can be used to attach a backplate. Added also version with longer stand to fit U7-Pro AP as it…
A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the…
BIQU Microprobe STL and STEP file. Found it on the BTT GitHub.
The mount is designed with my very limited skills, but it works. I was able to install the BIQU H2 extruder on the Creality Ender 6 and print at 100mm/s with excellent results. Youtube video with the print quality This was done using…
3D model based on the dimensional drawings and images publicly available online. For reference and design purposes only. You can measure the step file or use it to design fan ducts, mounts etcetera! Note; this model is not publicised or…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-Mini. I have included two versions of this mount: For two USW-Flex-Minis For a single USW-Flex-Mini To install your switch to this mount, simply slide it in. But once you reach the…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
I really liked this design but it was for the G3 Instant Camera and I have G4 Instant camera's.. Not sure why Ubiquiti decided to change the mounts ever so slightly but because of that the G4 can't use G3 mounts. So this is a remix of the…
Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and…
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
Hello Everyone I designed two types of stands for Ubiquiti UniFi U6+ (U6-PLUS) Access Point. The stand is compatible with other UniFi AP models that have a dimension of Ø160 x 33 mm (U6-Lite, AC-Lite). I chose the optimal tilt angle of…
Mounting is the Same as my other h2 mount https://www.printables.com/model/197289-biqu-h2-ender-5-plus-mount Nozzle to Probe -33,-11, Z should be same as stock mounts using 2 M3 x 8mm botls for the H2 and 2 M3x 8mm bolts (may want use a…
This is a key that inserts into the top of a Ubiquiti Networks UniFi AP to allow it to be removed from its wall mount. Insert into the slot on the top edge of the access point and twist left about 1/8 of a turn. The taper should be toward…
This is a mod of the 270 degree door that allows you to install a replacement door from a bambu printer or biqu door I modified the lower hinge to fit the bambu style doors and modified the brackets for the back of the door so the door…
This is a reupload from https://www.thingiverse.com/thing:5572539 which is itself a reupload from a different website. Credit to thatguy_ie on Thingiverse and Crosstalk Solutions on youtube for bringing it to my attention originally.…
Designed to be used with Predy's MAD - Modular Air Duct for BIQU H2 , mounts on original Ender 3 Pro carriage. BOM (Not including MAD assembly) 4x M3 - 8 mm screws (mounting carriage base and under extruder) 2x M3 - 25 mm screws (fan…
This is a stable desktop stand designed for the Ubiquiti U7 Pro XG access point. Compatible with any AP using the Flagship AP Replacement Mounting System (SKU: U-PRO-MP), up to approximately 206 mm in diameter. Updates in V2: Reduced size…
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
SSD tray to replace the original UACC-SSD-Tray
Plate to mount a Biqu H2 to the Ender 5+ Old nozzle to New Pictured above Nozzle to Probe -33,-11, Z should be same as stock mounts using 2 M3 x 8mm botls for the H2 and 2 M3x 8mm bolts (may want use a washer) and 2 m3 nuts for the Bl…
The switch is flat on top but is tapered on front bottom edge. As a result, two versions of the bracket are supplied. The standard mount is for a shelf mount. There is an inverted version that is better for mounting to a wall, hanging…
This is the all new Vortex System to mount the Biqu H2 V2 extruder on the Sovol SV01 PRO, OG SV01 & SV03! Equipped with twin spiralling air ducts for powerful effective airflow directly to the area below the nozzle! . EDIT: Now with V2…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL In my old installation, I used a wifi access point on a shelf at the same time as a switch. Since ubiquiti doesn't offer this option and I don't want to…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
Desk stand for Ubiquiti's Unifi 6 Lite access point. 15-20% infill 0.2 layer height
This is a simple adapter so that the Biqu Microprobe can be mounted on the mounting points made for a CR Touch or a BL Touch. It is essentially an extender, since the microprobe is significantly smaller in height than the usual suspects.…
Description This is the SA-3 Mozambique, a pistol-sized shotgun present in Apex Legends (and previously in the Titanfall series). Print instructions Print with your prefered settings. Don't forget to add support. Note : multiparts…
Relatively easy mounting and great cooling performance. BOM: 2 M3x35 (part of the H2 kit for the 2020 Fan) 2 M3x10 4 M3 Nut 3 M3x8 2 M3x20 2-4 M3x8 + 2-4 M3 Nuts (for the mounting plate 2 screws are enough however you can use all 4 I…
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
The tools that came with my BIQU B1 printer were just laying on the table and made a mess, so I designed this simple box to store it all (beside the rubber duck, duh!). It can store the wire cutter, nozzle wrench, allen keys, 3x UM2…
Adjustable fan duct for the H2 extruder that uses a 5015 blower fan.
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
A simple stand for a UAP AC Lite or a Nano HD since both use the small mounting bracket. Print instructions Print it laying on its side.
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
UK: Google Translate Bracket for Ubiquiti USW-Flex-Mini 5 Port Switch The bracket is centered both ways, so that the holder and locks can be welded firmly, but no more than it can be easily clicked out again, and at the same time it is…
This remix exists purely because I enjoy putting way to much detail into a model. Hopefully this helps someone intelligently design some amazing fixturing for this toolhead. Enjoy!
This is a corner mount for the Ubiquiti Unifi U6-Mesh (and UAP-Flex-HD) access point. We needed to mount a UAP Flex externally, and wanted to get the best possible coverage by using an outward corner, so remixed the referenced models to…
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt BIQU MicroProbe sensor using this universal BIQU MicroProbe for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 4 y_offset: -32 ... [safe_z_home]…
I wanted to create a simple clip-type wall mount for my Ubiquiti Flex Mini network switches. I have them installed in walls and under the table. The Flex Mini has a very rubbery bottom patch which keeps it in place without any additional…
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These are easy to lose and break. I lost mine, then found it again and used it as inspiration to design this replacement from scratch. This slides on and fits perfectly in my test print, just tight enough, and also the screw…
I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
This model clips into the existing quick snap fittings for the Unifi Protect G4 Instant and allows the camera to be angled downwards more than the existing swivel arm allows. The angle of this model is 45 degrees downward. The connector…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A dual 5015 fan duct for a BIQU H2 extruder. Place on the floor in the slicer so that the channel floor rests on the bed Ein Dual 5015 Lüfterkanal für einen BIQU H2 Extruder. Im Slicer auf Boden ablegen damit der Kanalboden am bett…
I just wanted a way to make the input wires area a little more clean looking so I whipped this cap together. The screw holes are a bit undersized so I could drill and tap to fasten directly into the material. Print Settings 0.2 layer…
Drop in and Adjustable only change I had to make was my X had to be Changed to -35 from the default -28. Just be sure to double check! Will need 2 x M2.5 x 10 and 2 M2.5 nuts for mounting.
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
Ubiquiti U6+, U6 Lite and AC Lite UFO stand
Das ist ein Case für die Montage einer Ubiquiti UniFi IN-WALL - UAP-AC-IW Damit kann die UAP-AC-IW einfach an die Wand geschraubt werden und das Netzwerk Kabel nach unten herausgelegt werden. Habe für die Montage wieder M3 Gewindeeinsatz…
I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…
To prevent the bubble level from getting trashed, which comes with every Ubiquiti Unifi Access Point, i designed this carrier thing for the bubble level to snap in. Print it with the slide-opening looking upwards with your most liked…
Simple wall mount adapter for the Ubiquiti Flex Mini 5 port switch. This can be used with cables coming out of the top or the bottom. Affixes easily with common drywall anchors or 3M adhesive strips.
This mount keeps the nozzle in the same place as the stock nozzle, so no loss of print volume on any axis. Uses original mounting system, no extra hardware required. Base model with optional: Dual 5015 ducts Single 5015 duct (remix of…
Added holes for U6+ mounting bracket and added additional cable routing options.
…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex V2 high performance parts cooling system for the Biqu H2 V2 series. Print in PETG at 0.2mm layer height. Orientate the ducts as per the cover photo, print…
Unifi G4 Doorbell Pro Habe hier ein Halter für die G4 Doorbell Pro erstellt um die alten Schraublöcher zu verstecken. Am besten mit PETG/ABS/ASA drucken um die Haltbarkeit zu gewährleisten Viel Spaß damit
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
I needed a cover for my BIQU HDMI5 touch display I found this from Armourist and used/adapted it to another 7" display that works really well with a nice and functional design. Feet are reversible and you can use them with 15 and 30 deg,…
Simple BLTouch/3DTouch/MicroProbe mount for your BIQU H2 V2S lite extruder. Assembly: Just use two washers between the fan and the mount (as seen in pictures) BL/3D Touch Offset: x: -32 y: +2 MicroProbe Offset: x: -29 y: +2 Printed…
As I want to use KNOMI together with the Nozzle Camera I merged the two files to get a Stealthburner with both features. Edit: May 2, 2023: Updated model Edit: May 13, 2023: Added Grille version Edit: May 15, 2023: Added V-Version Edit:…
---------------------------------------------------------------------------------------- CHECK OUT THE NEW & BETTER VERSION IN THE REMIXES! NEUE & VERBESSERTE VERSION IN DEN REMIXES ONLINE!…
Heads up! This is the new, improved "v2" enclosure... If you were looking for the very popular, original "v1" enclosure, it's still available over here:…
Edit: A few people had issues with the nozzles blowing ~5mm behind the hot end. I repositioned them by that 5mm to address this. I have removed the old versions. I really liked the air flow of the Hero Me system. I started with the file…
Description UK: Google Translate Bracket for Ubiquiti UniFi UX Express The bracket that locks the Ubiquiti UniFi UX Express firmly, however, no more than it can easily be clicked out again, and at the same time it is possible to change…
UPDATE - Included new (untested rear plate). I wasn't very happy with the clamp version to hold the belt. This is more HeroMe-ish. If you try it out, please let me know how it works. I have one ready to test but I just haven't had the…
Model of an original wall-mounting bracket, that comes with the PoE-injector for a UniFi AP AC Lite. Might be compatible with other UniFi PoE-injectors. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: Yes Resolution: 0.28 mm…
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a…
