11 096 modeli
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…
Wydruk około 17,00 €–20,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Raspberry Pi Camera Stand Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera. Features Compatible with the official Pi…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…
Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my work please support me. :-) Buy me coffee at ko-fi.
Wydruk około 0,94 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: Thanks to community feedback I have added additional sized inserts for different phones (so there's more of a chance of a snug fit for your phone, but a looser fit is okay long as it doesn't fall out!) as well as a version with…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Just a quick camera enclosure / stand I whipped up for my Raspberry Pi. Be aware: this enclosure does not fit the v1.3 camera! Print instructions Category: Camera Summary Just a quick camera enclosure / stand I whipped up for my Raspberry…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena jednego wariantu
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A (parametric) buckle that you can attach to your camera strap, which lets you (hopefully) stop losing your lens cap. The STL is sized for a 58mm lens cap, and a ~40mm strap width. The printing layers make for a great friction catch for…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Ho disegnato un supporto, leggerissimo, da collegare ad incastro sull'asse Z per la Raspberry Pi camera e la stampante Prusa MK3S e credo anche MK3. È formato da tre pezzi e si stampano tutti senza supporti in orizzontale. La Pi camera è…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This is an original design. This is for Prusa. This is easy to print. This is for OctoPrint. This is smart #3dp design and 100% printable. </b> #3dp Update: 2nd Gen Mount is out! Improved stability, fit and cable guide. If you like what…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is a remix to an existing camera mount. The remix adjusts the camera height and spacing from the print bed for better alignment with the first layer and to allow clearance for side drawers (the side drawers I've printed are:…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
camera mount hooks on to the side of the extrusion on the Prusa i3 mk3s I have a magnetic base on my camera so I have screwed the metal plate that came with it which holds it in place or it can just sit on top the last picture is the view…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Discover the intricacies of the Sony A7 with my meticulously detailed 3D model, perfect for enthusiasts, designers, and educators. This high-fidelity model includes every detail of the camera body and lens, capturing the essence of the…
Wydruk około 6,97 €–8,52 € nettoWstępna wycena jednego wariantu
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
WHAT THIS IS: I wanted a raspberry pi camera module 3 (or CM3) holder for my robot. Most models uploaded on printables were made for 3D printers, so I couldn't get a design to fit my robot as they were all supposed to be directly…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
This mount uses Zipties to mount the camera to the bed. This creates beautiful timelapses! I've used M3 screws from the spare parts bag of my prusa (I used a long screw to attach the swivel so it doesn't break)
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Hello there! I designed an extendable vintage camera. This is a print-in-place model that doesn't require support. It is my first try on modelling a model that has to disassemble itself into multiple components after printing. It is…
Wydruk około 7,13 €–8,71 € nettoWstępna wycena jednego wariantu
simple mount. please understand layer line weakness before printing. small frame may show on sides if full 360
Wydruk około 4,52 €–5,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the 3D-printed enclosure of my open-source HomeKit camera . This snap-fit enclosure can be assembled without any screws. Hardware Raspberry Pi Zero W Camera Module Camera Cable compatible with Raspberry Pi Zero 5.1V micro USB…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case doesn't require any additional hardware, it just snaps in place. I suggest printing it with PETG but also PLA should work as well. To make the snap fit work propely be sure that there aren't any debris in the way left after the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
15 degree base for Tapo C200 camera or can be used whitout feet for a flat base. Supports needed on build plate only for the base. Tree supports are easier to remove. For asembly use 2 M3x10 bolts.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
This is a very simple case for the Raspberry Pi HQ Camera. It's useful for covering the bare PCB of the camera when you want to use it on a tripod (via its own mount) without being attached to the Pi or anything else. It is designed to be…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
My Exa camera was missing the takeup spool, so I made my own. Printing Print with the dome faceing upwards and the hole facing the print bed. Requires some support.
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
iMac 24 2021 Camera Cover for LEGO Filament ABS or PLA or PETG
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple case for the Raspberry Pi HQ camera. Rear side of case has a raspberry pi logo. I’d suggest printing with a <.15 layer height. It is based on the Pi mechanical drawings and the holes fit M2.5 screws. Make sure the front/back of…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wasn’t aware the M12 variant existed… I thought there was only one model of HQ camera so I was a bit surprised when I unboxed it. I couldn’t find a way to mount it to my telescope so I put together this basic design. I used some…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is a remix which allowes to install the standard fisheye cams for the Raspberry which gives a nice wide view.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
This is a rigid arm designed to mount to the z axis wheels of the Anycubic Kobra Neo. It has a 7mm hole oriented vertically at the end that fits a standard Gopro style camera mounting screw (the type you would use to attach it to a…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu
Canon LP-E17 Battery Charger LC-E17E Base This base snugly fits to your canon battery charger LC-E17E, and provides clear slots for charged and dead batteries. You'll never get caught without a charged battery again! Simply store your…
Wydruk około 12,40 €–15,15 € nettoWstępna wycena jednego wariantu
I designed this large camera tripod for filming large projects for on my youtube channel! I made a video about this project: Links doesn't work on printables at the moment, it gives an error but you can go to the tab “Makes & Comments”,…
Wydruk około 7,50 €–9,17 € nettoWstępna wycena jednego wariantu
SV06 Plus Front Camera Mount Modified the Original to Fit the SV06 Plus. I thank “ azlum ” for his original design. Only the Front Plate part included. Use the original risers form the original model. SV06 Front Cam Mount - Top.stl Top…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena jednego wariantu
Reduce the likelihood of scratches and damage of your action camera lens and filter. This lens hood is fastened through simply adding it between a 52mm filter and a camera cage. I am using an Insta360 ONE R with a SmallRig cage (2901),…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Solarigraphy camera with water drain. assembly wideo by my brother: You need photopapier 10cm/15cm.
Wydruk około 17,50 €–21,39 € nettoWstępna wycena jednego wariantu
Case to build AllSky camera using UnderWaterDome…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple camera TAPO C110 holder for Prusa mini+
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
I made a Powerbank Mount for my Camera Tripod. I designed this for my Anker Power core 20100 Powerbank. Now i can easily charge my Sony Alpha 7 III, while it takes photos or Timelapse etc. The diameter of my tripod (ESDDI) is 2,4 cm.…
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
This Cameramount is an easy to fix solution for the current (2025) Buddy3D Camera, sold via Prusa Online Shop. The mount is for to use with the mounting plate that comes with the camera. It is variable in the fixing angle so the user is…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kamera funguje ako cloudova a system ONVIF takže je možne sa pripojiť akokoľvek. Ja to mam nastavene aj cez iSPY a funguje bez problémov. Veľmi kvalitné je nočné videnie, takže tlačím v absolútnej tme a predsa vidím absolútne všetko.…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A magnetic mount to adapt Peak Design's Mobile Case to an Apple Studio Display for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at the…
Wydruk około 3,01 €–3,67 € nettoWstępna wycena jednego wariantu
Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Raspberry Pi HQ camera back cover as small as possible. Model is created as the minimal solution to protect parts at the back of camera PCB from accidental contact with conductive materials. The body footprint matches PCB outline and it…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
The M2.5 screws now screw directly into the mount/adapter. Be careful about how many times you attach and detach the camera from the mount/adapter. It's not designed for that. Attaching it once should suffice. After that, you risk…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
This mount interfaces with the plastic base plate included with the camera itself via three M3 screws and two nuts. The semi-circular slot on the base allows for the camera to be rotated slightly to either side of perpendicular to get a…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by xiphmont's implementation, I created my own files for the enclosure and pi3a+ frame for this update. Please follow xiphmont's guide to install the pi3a+ and perform the upgrade. The installation was flawless for me with the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pouzijte sroubky M3x16 nebo delsi Use M3x16 or longer screws
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera Mount for Prusalink/Prusaconnect on Frame
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Wydruk około 6,58 €–8,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model combines two awesome models to mount and adjust the Raspberry Pi HQ Camera. After printing the ball head piece you need to print also the following parts from the linked originals: Raspberry Pi HQ Camera Mount for the…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
Hi, Here an enhancement of the camera mount I designed for my 3D printer Creality Ender 3 S1. The previous version had some weakness, like the camera support, too thin, and a bad angle view. I operate a new design with a better support…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
extended the length of the original design by ~35mm, and added some more rounding and smoothening
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
This 3D model is designed specifically for professional filmmakers who wish to simulate camera arm movements with a car before actual shooting. It's tailored for 1:43 scale SUV model cars. Simply print it out and assemble the pieces using…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Sure.. the world needed more Raspberry Pi casings… -.- Well… I needed a compact, mobile ridged platform to develop AI models and gather data. I was searching online for a good casing that could mount my Pi to something like a tri-pod /…
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
