Liczymy pasujące modele…
Simply a mounting bracket for the CC1101, the bracket press fits against the dupont connectors and is hot glued into place. It is a evolution of @Oliverkayak mount model.
I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
EDIT - UPDATE 15 August 2026 Based on some feedback, I've replaced the 3MF file with one that contains better plate labels and support blockers / enforcers. The original 3MF file has been removed to avoid confusion. There is a solid…
Case for ESP32 Board (NodeMCU V2, Attention: only for the one with Mounting Holes!) and CC1101 Transceiver. Toolless assembly.
@PrintedRawDs_4927914 Centauri Carbon 1 and 2 lowered top cover/riser remix. I like his design since it lowers the canvas to make the height of the top hat/cover/riser much lower. Also the acrylic is very affordable and easy to get. Total…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
It needs to be printed on SLA resin printer. FDM not tested.
This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm. This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used…
Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.
A LilyGo T-Embed CC1101 Body with dual SMA antenna holes. This is the stock body part and is not optimised for FDM., so it will require well-tuned support setting.
https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/
I lowered the canvas and created a riser that puts the height around 670mm including handle similarly to the CC2 Emoji. The top spool brackets are lowered and the rear bracket has a shield to protect the canvas cable when swapping spools.…
RP2040 + cc1101 in one chassis. The device is working with cc1101-tool firmware from github my fork: https://github.com/McGr3g0r/cc1101-tool my new tool: https://github.com/McGr3g0r/cc1101-wizzard most recent FW+apk:…
Brought this model over from makerworld and made it fit with canvas see link below. THIS IS NOT MY DESIGN. Printables didn't have it so I'm brining it over and making it more clear what fits what. PRINT 1 Bracket & 1 Bin If you have the…
updated to better accommodate spools without rubbing. If it imports large, scale it to 10%, I will reupload asap. An adapter so that you can put Elegoo rewind spools from CC2 in the Sunlu S4 drier. Without rewind, color changes will cause…
Work in progress version. Needs a few tweaks here and there, STEP files are included if you want to make changes. Hardware: M2.5x16 screws (ISO4762/DIN912) - 4pcs M2.5 heat set inserts, 5 or 6mm long - 4pcs M2.5x5mm flat head screws for…
LilyGo T-Embed CC1101 is a cheap alternative for flipper zero,but there is one small issue:there is no power switch for device.Even works in deep sleep mode,the battery drained in two days. So I modified the official shell to add a power…
This is a 200mm tall version of MU74NT's original design. I cut the ptfe tubes back 70mm and still had issues with the lines trying to push the glass off the top of the original riser. Figured while I was at it, I may as well update this…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
After getting my Canvas upgrade, I could no longer use the original slide because spool 3 blocks the end of the slide. This new slide mounts with the screw under the purge chute and goes to the left away from the spools and uses one of…
The main board case uses 2 M3 screws. You will need to use a tap and die set to get the threads nice. The CC1101 case uses a single M3 screw. The NRF24 case uses a small blob of super glue to ensure the case stays together. Print in…
Elegoo CC1 with CANVAS top hood Assembled with M3 screws, heat inserts and glue. Adjustable vented top Need 12 M3x4 or M3x6 heat inserts, 12 M3x8 screws Need 2x 168x168 plexiglas for the windows or print 2x the plexi_window part using…
This is a CC1101 case to use it with the M5Stack Plus 2.
Flipper Zero NRF24 Case & Window CC1101 Remix for NRF24 Antenna Added space for Antenna Space for module pins
Case for usb cul stick adjust it with the scad file Print instructions Category: Electronics
*Update I did not see that https://www.prusaprinters.org/social/1022-dsk001 Has a model named Millenium Enterprise and do not want to step on toes so I have renamed it the NCC1701-Falcon. So I had a thought and I wanted to see it happen…
Just a simple remix.. For people who only has the standard sheet and want something nice aswell ;) I removed the hole for the LED aswell, because i didnt have an intention of using it. I will do more variations on request. I was thinking…
A quick case I put together to fit the CC1101 expansion board made by TehRabbitt. The board can be purchased on Tindie here . The board is designed to be used with the Flipper Zero, which can be found here . To assemble the case, you'll…
here is a cover for LilyGo T-Embed CC1101 that you can choose yourself what color it should be instead of the standard cover that comes with it when you buy it This also saves you from having to destroy the original antenna to retrofit…
Elegoo CC1 poops chute and basket for CANVAS users Access from the left of the printer, big poops basket for multicolor printing Need to replace the original screws by 3 M3x8. The problems seen on pictures are allready addressed on the…
1st layer test for ELEGOO CC2 maybe CC1 too Feel free to test
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
This is an remix of the awesome tool holder for Milwaukee M18 provided by GreatOldOne.
Case for the D1 mini clone and CC1101 with "rubber duck" antenna. Based on @RobinsBlog_de design, but I wasnt happy with a few things, such as the weird bottom and the hole on top not made for the rubber duck antenna. Using this to…
Płytka ESP32 DevKit: Polecam wersję z portem USB-C dla wygody. Uwaga: Jeśli masz stare układy ESP8266, w tym projekcie ich nie użyjemy – nowa wersja komponentu wymaga ESP32, który jest szybszy i w pełni wspierany. Moduł CC1101 (868 MHz):…
Made a remix to make the shroud from @SpamNRice_3402200 compatible with the canvas mount from @EugeneLaw_1166687 so the canvas unit can sit high enough to clear the canvas cable as well as low enough to not have too much interference…
крыша tembed Магниты 8Х2 ММ Добавил пару отверстий для выключателя по запросам, если что то не совпадает пишите в коменты Я не тестил крышку с выключателем Если вам не подходит сторона выключателя B просто отзеркальте модель , она…
Update 09/24/2026 : I added 5 x extended shelf variant files, that have the PTFE tubes shelf portion of this current "Rear right corner w/ added inner PTFE tubes shelf" remix model extended out at 5 x more depths, as compared to the 42 mm…
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
Full description and BOM on my GitHub: https://github.com/olekrause/t-embed-cc1101-plus-GPS-Addon This project adds an ATGM336H module to the LILYGO T-Embed CC1101 Plus Printing suggestions: - Print in PETG - Auto orient the model -…
This is a simple hood upgrade for the Elegoo Centauri Carbon with the Canvas upgrade installed. It’s a border (frame) that rests on top of the printer, and an IKEA SAMLA 12 gallon box then sits on top of that border. The model is sliced…
A case for a cc1101 sub-GHz signal extender, plain and flipper models. Needs 4 m3x10 and 2 m3x5 bolts
For three A4 sheets of plexiglass without cuts (original dimensions 210 x 297 mm) The parts from the original model are used for the right side of this project The mounts for the plexiglass sheets have a thickness of 3 mm, since the…
Want to turn your Flipper Zero into a Tank? Well all you need is the FlipperHub Sub-GHz Booster module 2.0 and this file. The module in question is to be found on Tindie. The case just slides onto the board and holds the module securely,…
Case for CaracalDB Mini CC1101 Add-on board for Flipper Zero
Cable chain system with 12.5x7.5mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 20mm bend radius. Your printer should be able to print…
This boot cover is made to fit my Flipper Zero - CC1101 Board by TehRabbitt case found at the following locations: https://www.printables.com/model/606834 https://www.thingiverse.com/thing:6122121…
This case is designed specifically for the 38-pin ESP32 (ESP-WROOM-32 with CP2102 USB-C) development board. If needed, you can easily modify the dimensions to fit a different board. This is a fully parametric model—at least, I hope it is!…
Remix of the LaunchXL Enclosure by millibyte for the TI LaunchXL CC1352P-2 (longer than original because of PCB-Antenna and SMA-Socket) Changed some details to make it fit M3 Screws from the bottom and added the Zigbee 2 MQTT Logo :) Hope…
extra cable management cylinders due to the canvas only coming with one, print with your printer's 'fine' preset for more cable clutch power
I couldn't find a filament poop bucket that was both easy to remove/empty AND that would work with the Elegoo CC1 w/Canvas because the access port cable was in the way every model. My printer is on my work table backed up against a wall…
Anticipating a higher volume of filament waste after I receive the Canvas (multi-color) add-on for my Centauri Carbon, I needed a different poop collection solution than the moderately sized drawer type collector I'm now using. Also, with…
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
A simple adapter to give the CC1 canvas rewind spools the same mounting as the CC2 fixed orientation and added original spacer back on
1 x CC1101 module (https://aliexpress.ru/item/1005006427856868.html) 1 x 5v to 3.3 (https://aliexpress.ru/item/1005004680123549.html) 3 x 16x2,5 screws
A filament purge bin for Elegoo Centauri Carbon 1 & Centauri Carbon 2 machines. It may fit other machines where the chute width is about 42mm wide or less. The first model is 78mm in height (71mm internally usable for filament waste)…
The original design lacks information on the construction process. I'm therefore adding some information here. The square box is from Action : https://www.action.com/fr-fr/p/2533849/boite-de-rangement-avec-couvercle-clipse/ The box can be…
This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…
heres a direct copy down to the mm of the connector that holds the retractable spools to the side of the elegoo centauri carbon 2. i got fed up with searching trying to find one. so i decoded to design my own. i printed mine in pla but…
This is a work in progress, this case will fit you're Lilygo CC1101 Plus that has the external antennas (the latest model) See my other prints for this new desk / display stand…
Description: Toolholder / tool caddy for the popular AL ExtremeError (aka @AEE ) Elegoo Centauri Canvas Relocation & Riser W/ LED. Front or left mounted. For the Centauri Carbon 1 with Canvas upgrade. Versions for the 45deg LED and 45deg…
Description: Community feedback on the popular @ALExtremeError (aka @AEE ) Elegoo Centauri Canvas Relocation & Riser W/ LED often mentions trouble with seating the PTFE tubes and being unable to see what's happening inside the riser. This…
Case and Pin Protector for CaracalDB ESP32 NRF24 and CC1101 Add-on board for Flipper Zero
Centauri-Monitor - ESP32 Elegoo CC1 status monitor A 3D print monitor for Elegoo Centauri Carbon printer(CC1), running on an ESP32-C3 with an OLED display and a web-based configuration panel. Features Reads printer status via the SDCP…
Remix from Elegoo Centauri Carbon Screen Cover by MagicShrimp. Added 3x2 mm magnets on each corner so it can rest on the side panel when I need to use the screen.
The Filament Spool Holders utilize the original spindle mounts supplied in the Canvas kit for the CC1. Narrows the overall profile and space required for the original mounting. Designed to be used with the following Canvas relocation…
This is a case for the Waveshare ESP32 ETH POE kit. It could probably use some more tweaks, but it let me get my RF Proxy into a case relatively easily! Here is the original design in OnShape . I used this setup to make an RF Proxy using…
Case and Pin Protector for CaracalDB ESP32 GPS and CC1101 Add-on board for Flipper Zero
Here I created a Z Axis well cover for the Centauri carbon, to save myself and others from having to keep cleaning them out when they have a failed print. keep in mind that you may have to adjust settings or remove these covers if you…
Repair and maintenance tray build to max dimensions of Centauri Carbon build plates and hold a Ryobi Electric Screwdriver with several bits and extensions. Chamfered compartments for small parts for ease of grabbing. V2 includes embossed…
I made this cover so I can continue to print with engineering filaments and force the gasses to only come out through the HEPA filter, not any other ports and openings available. It works with the Canvas upgrade and the Attachments to…
Made a simple remix of the remix from @FREE272 to make the chute compatible with CC1 Canvas connector's location so both the drawer clears the cable with some spare room, as well as made it slimmer so it can sit close to wall with exactly…
The print consist in 2 pieces, the bracket and the plate, the bracket replaces the original one that comes in the canvas kit, while the plate goes right against the back of the hub and needs to be screwed. Be advised that you cannot use…
A (remixed) case for the CC1200 M17 Rev B Hotspot: https://rz01.org/cc1200/
Whether you upgraded to canvas or made a new spool holder this will plug the gap from the old default CC1 Spool holder. I made to fit perfectly tight and snap in. Just unscrew the old one and push in this print. Print settings: CC1 Elegoo…
Description EN Meet the Elegant Case Enclosure for PINGEQUA Forget clunky, standard enclosures. This case was designed for those who appreciate premium aesthetics, satisfying tactile mechanics, and high-quality finishes. Tailor-made for…
Here we go boys and girls the center mounted canvas system. No one else did it so I did. Reminder it's only my best idea, you may have improvements or ideas, but your best idea was only inspired by mine. Inspiration is the only gift I can…
chitu chamber heater for elegoo centauri carbon 1. PEBA/TPU plug for hole. uses the internal stock filament holder studes for mounting and stock hard ware 4 layers print the vents without infill wiht .4 nozzle no supports needed i…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…
Simple flat plug for the spool holder of the Centauri Carbon. Can be inserted by hand or with a flat-head screwdriver.
compact case holding a esp32 wroom dev board plus cc1101 in the most compact way, by building a sandwich. see pictures for details. can be used for espsomfy or to control other 433mhz devices
I made a nice holder for mine Wahoo Elemnt WFCC1 I place it on mij steering wheel for mine Crivit Urban X3 Holder Mount 40 x 108.8 x 16.6 mm
Most tool holders I found were made to fit very specific tools, which makes them annoying if you want to store something with a weird shape or add new tools later. I wanted something more flexible, so I made this holder with a modular…
Weather station case for an esp32 D1 mini and a RF receiver. Project repository for the hardware: https://gitlab.com/raupulus/esp32-weatherstation-bresser-read-868mhz-cc1101
Minpin 115 Top Camera plate for http://www.thingiverse.com/thing:1329897 http://www.rcgroups.com/forums/showthread.php?t=2580356 4/21 - Added version with antenna strain relief 4/25 - Changed the antenna strain relief version to 4…
This is original size pulley for motor drilling machine 2cc1 or 2cc1m (Saratovskij zavod tyazhelyh zuboreznyh stankov).
Here I made a modification to a Canvas riser I liked made by another creator. it's nearly the same size as the emoji edition CC2 but made for the CC1. I made this addition so I can still print TPU without going through the canvas unit. I…
This is a gap filler for the centauri carbon 1 that is using a centauri carbon 2 top hat. It fits pretty well I ended up using tape to hold the dovetail joints a little stronger on the thinner sections. for the cut models i removed the…
Aston Martin CC100 scale car 3d model stl for 3d printing, a realistic civilian vehicle model made for collectors and diorama displays. You get a clean, display-ready Aston Martin CC100 model that works great for desk and shelf decor,…
This case has an opening in the back to allow space for the pins for when using it without the flipper.
The model is made in 3 pieces for printability, the drawer, the mount and the enclosure Be advised that you need to glue the mount to the enclosure via the lip, I reccommend that you first screw in the mount to the printer, then apply…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement end-cap style stand that…
This is a spool holder stand I made for the Centauri Carbon 1 CANVAS upgrade kit. It uses the screws and the spool holder mounts that comes with the kit. You will have to take the mounts off the metal pieces that come with the kit and put…
stampato in petg 4 pareti riempimento 20% supporti ad albero
The Spool Collar has a small support that may need trimmed off from the hex side in order to slide in the slot on the Extensions smoothly. For a low profile fit, there is the 5kg Extension. For a positive installation of the Spool Collar,…
A window adapter for Tom Hoeppner's "Riser for Elegoo Centauri Carbon (ECC1) with Canvas": https://www.printables.com/model/1791763-riser-for-elegoo-centauri-carbon-ecc1-with-canvas The original riser is designed for 3 mm polycarbonate…
A waste (poop) slope and outlet cover for the Elegoo Centauri Carbon (CC1). The slope directs purge filament out to the right side of the printer. The separate cover goes over the printer’s waste outlet. Mount both with double-sided tape;…
![[OECC1] 12.5x7.5mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161367/images/8924418_15aed856-fa6d-4aa9-9777-027257f290dc_faf902f5-847f-484c-9a31-ac1d4c58c2cd/348e53a0-6d86-44fb-8df7-7ac849886a53.png)
![[CC1] Z Axis Rod Well cover](https://media.printables.com/media/prints/b065ba3b-7bd1-4d48-8667-536a4c565136/images/12311613_20fdcd7f-d359-401b-a3ee-568249d6764f_9f450837-a6fc-4a2e-b1d0-736952f7b3b8/screenshot-2026-03-14-173926.png)
![[CC1] Run-out Sensor hole cover](https://media.printables.com/media/prints/87f095a5-4263-42a3-ab6d-f5675e9fc4cd/images/13213605_b350747b-c5f0-4f83-8875-782e2ac208f4_d22aaa2a-b35d-4dde-9e65-af0473446080/screenshot-2026-06-24-224420.png)
![[CC1] Lowered Canvas Remix (originally made by MU74NT) for TPU Conversion](https://media.printables.com/media/prints/cf3f208e-2586-40bc-b8e1-e34b09953f5e/images/13135792_7f5bf317-7c3d-46f8-b4e4-8ba2d74e7d49_09d70bf9-0516-4c40-a91d-a43219a0dad7/screenshot-2026-06-13-142351.png)
