6058 modeli
Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…
Wydruk około 7,99 €–9,77 € nettoWstępna wycena jednego wariantu
The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join. There is a holder for the HW-585 12V fan controller You will…
Wydruk około 10,11 €–12,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
This uses 4" dryer ducting hose to connect a fan to a nozzle for blowing air under the covers. I tried this with a box fan, and also a squirrel cage blower fan. The box fan in this design works poorly. The pressure in front of the fan…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits any 80x80x25mm PC fan Visit website for more info
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Wydruk około 6,36 €–7,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A working cooler for a single can of your preferred beverage, take a small break and have yourself a custom cooler drink---you deserve it! Or, in my case, it makes the perfect Father's Day gift. The main body of the cooler comes in two…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Hello, I'm industriel designer, I usually draw on Rhino3. I made an extruder motor cooler which has the particularity of being positioned in the axis of the extruder. This is for new MK3s+ but also corresponds to the Mk3s model. The…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DJI's mini 3 pro drone has no internal fan. When powered up but not flying, the drone tends to overheat and shut down after some minutes. This can be very annoying, especially during firmware upgrades. This model is a drone display stand…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Optional fan enhance the cooling of the brushless motor compartment. Just slide-in the fan into the motor shaft.
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Upload your makes, i would love to see them.
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fully 3D printable and customizable wheels. This caster design is 100% 3D printed and can be decorated with custom plates that are also compatible with the holes on the Cooler Master QUBE 500 PC case. Why would you want caster wheels on a…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have my printers in an enclosure as i print in a dusty enviroment. Not only does the enclosure keep the printers clean, it stops drafts and keeps the temperature stable. Problem with that is it can get a bit warm in there when printing…
Wydruk około 8,31 €–10,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wargames Wall Coolant Tank - Section 9 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 6,53 €–7,98 € nettoWstępna wycena jednego wariantu
Cooler holder for Socket3 CPU 486 Držák chladiče pro Socket3 a procesor 486
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
Raspberry Pi5 case with the cpu cooler fully exposed
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Quadriga – Modular Cooling Tower for Bitaxe Devices Quadriga is a compact, vertically oriented cooling tower designed to efficiently cool up to four Bitaxe devices mounted on its sides. The system is optimized for continuous operation and…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To install the upgrade you have to remove the hotend. The next step is to insert the printed part with the open side facing the hotend cooling fan. It should clip in with the two noses into the fan mounting holes. Next you have to insert…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Hoth Snow Speeder ATMOS Cooler Badge. + Solo Hoth Snow Speeder. USE AtmosSnow for Cooler badge.
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Keyboard stand for displaying Your keyboard on the side of the Cooler Master QUBE 500 Flatpack PC case. Two parts for easier print. May need a liitle bit of supports on overhangs. Models already oriented in intended print positon.…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Clip sujeción para el cambiar el ventilador original del Fryzen 120RGB Deepcool por un Be Quiet! Pure wings 2 Densidad de relleno 100%
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Longer Honeywell cooling fan knob
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"These are "Ear Savers" that PandaProps designed for health care providers to use. These are for installing behind the head of surgical masks, to remove the strain of the elastics behind the ears which can cause chafing and soreness. I…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Simple to print (ABS suggested due to heat) for the Mac Mini 2012 edition to allow for extra air flow under the unit. I find during intensive work (video conversions especially) the bottom of the unit gets very hot. I have a fan nearby,…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
This is a fan shroud to help the CPU fan suck in cold air from the outside, through the side panels. It should just fit through pressure, no mounting hardware or tape needed. I made it for the "Kolink Rocket" mini-ITX pc case with the…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Description : Donnez à votre PC une ventilation maximale avec cette grille spécialement conçue pour accueillir deux ventilateurs de 120mm ! Cette grille intelligemment conçue permet un flux d'air optimal au-dessus de votre boîtier PC,…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A big heart creating an amazing effect. Created as a gift for valentines day.
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Base Stand / Feet for the Watercool MORA4 (MO-RA) Radiators. Works on the 200, 400, 600 versions of the radiator. Only tested on the 400. Dimensions 150 x 50 x 25mm. There is enough espace for mounting both grills (front and back) and…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cool SL1 vat cover when you have the lid up servicing the printer. No need to remove the screws. Halves overlap to block the light. Print instructions Standard print. Gcode is poor mans multi colour (pause and change filament) :)
Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a set of decorations for your Master Cooler QUBE 500 computer case. You can have RGB LED lights bouncing with the music, or single color LED lights glowing in the lightning bolt. These items will give your PC a cool and…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Valentines Day gift for all even the classroom can be for backpacks/necklace/keychain and many more ideas! Enjoy!
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Snowflake Atmos Cooler Badge.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
For a long time I used the first version on a 30x30 fan, but recently the fan started to whistle. So I made this version on a 40x40mm fan I had at home. Improved version with fan. The fan used is "40x40x10 5V". The RPI-port on the einsy…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
AMD AM4 compatible mount for the old XSPC Delta V3 CPU water cooling block. Any water block with 55mm circular mounting point will work. Can be cut to a different height in your slicer before printing. I used 10mm instead of the model's…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Fursuits (and other costume heads) get really hot! Unfortunately, if you don't own a full fursuit (just a partial or mini-partial), there really aren't any easy hands-free options for cooling down that don't involve modifying your suit.…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
One of my fish tokens broke, so I designed a replacement
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Printed for a model 15-dc0018nc and for models in the same design. Anti-slip plugs are placed on the bottom. Settings: 0.2 mm layer 25% infill no supports ironing on the top layer for a better appearance of the OMEN logo Printed with…
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…
Wydruk około 11,25 €–13,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cool Lisa Simpson *No need for MMU2s, its printed with single extruder and a few color switches.
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
This model uses the recess on either end of the cooler to attach wheels. This model is split into two pieces to allow printing on a MK4. The wheel attachment is held on with a ratchet strap that is threaded though the slots on either end…
Wydruk około 58,98 €–72,08 € nettoWstępna wycena jednego wariantu
A Cooling fan replacement chute because the original does not fit anymore if the hot end is replaced with a Revo six.
Wydruk około 0,27 €–0,34 € nettoWstępna wycena jednego wariantu
Cooling pad leg for C-Tech GCP-01.
Wydruk około 0,15 €–0,19 € nettoWstępna wycena jednego wariantu
Overview The Cooler Buddy is your own personal, customisable computer buddy who can sit on, interact with or pose on your desk to jazz up your computer setup and give it that personal feel. Design Language To align with Cooler Masters…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wall mountable stand which can fit both a laptop and an external lap cooler.
Wydruk około 7,30 €–8,93 € nettoWstępna wycena jednego wariantu
These Files are Version 2.0 of the HAF Case Top Cover Fan Duct. This is a Fan Duct designed to cover the top opening of the HAF 912 Case. This model has locator pins that use the watercooling holes. If you want a version that uses other…
Wydruk około 14,66 €–17,92 € nettoWstępna wycena jednego wariantu
I was tired of the coolant making a mess in the engine bay whenever I had to refill the cooling system. This tool screws into the bleed screw port and allows you to attach some 3/8" tubing. This stops coolant from spilling and allows you…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
cat for Cooler Master QUBE 500
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Replacement for broken and hard-to -use fan switch operator. Printed here in PET-G @ 0.3 layer height. Remove the front panel and un-snap the existing operator from the slide switch. Some small filing on the case will be needed to fit the…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für meine Plugin Festivals Kühlbox (Alpicool) gibt es den Akku nicht mehr. Hier ein Adapter für die 12V 8A Akkus von Scangrip. Es wird eine Feder 8x15mm und ein Stift 4x12mm benötigt. Die Kontakte sind standard Flachstecker 6,3 aus dem…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wind Tunnel This is another custom front-panel design for the MasterFrame 600 for the CoolerMaster FreeForm Competition. The model is based on the wind-tunnel principle used in the HAVN 360 case. The goal is a straight, unobstructed…
Wydruk około 9,51 €–11,62 € nettoWstępna wycena jednego wariantu
This is a bracket to hang on the handle of a Hyckes Hycoller coolbox. The power adapter can be placed in it, so that it no longer lies on the ground. Handy for all the coolboxes used on the campsite. Then the power adapter does not lie on…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wird der Icecube mit dem Akku in der Seitentasche betrieben, hängt das Kabel heraus. Diese Schiene hält und schützt das Kabel mit Magneten. Benötigt werden 5 Magnete 8dx4mm Filament: Extrudr NX2 Grau (PLA)
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
100x160mm signs, with art of a school building, and text "Be (Cruel or Cool) to your School" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
I bought an used machine that didn't have the original with it so I had to improvise one. Needs 1,7mm thick 8mm diameter circular magnets in the back if you want to attach it securely. And steel strip on the cooler's shell to attach it…
Wydruk około 11,83 €–14,46 € nettoWstępna wycena jednego wariantu
Just a wrench for the hex plastic nuts inside the water tank.
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
This is my second entry for the Cooler Master FreeForm Playground Contest, and several additional designs are already in development. The models are fully custom-designed for the MasterFrame 600, a highly modular chassis built to…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…
I wanted to test cooling fan performance objectively back to back, so I designed this part to help. Previously I had noticed the AIO micro 3D printer test did a good job of showing up the flaws of a lack of cooling fan, so I modelled a…
Updates 31 may 2024. Fixed the issue with the wall thickness of the Ducts . ⚠ Disclaimer: before starting printing, make sure the extruder motor on your printer has side screw holes. To check this, you need to remove the stock extruder…
Tips for printing: Supports: No Layer height: 0.16mm (optimal) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No Colors and filament I used (4 Color Version): PLA / White - for the body and eyes…
Cool Cat by Mehdals, a collectable art toy. This model was not AI generated I sculpted it in Blender.
UPDATED 5-7-2023 7:10PM PDT: Updated to include the missing shorty version: Neptune 3 Pro Shorty Shroud -5015 Fan.stl UPDATED 5-7-2023 10:30AM PDT: Now supports ADXL345 accelerometers. Updated the two shrouds and two fronts to have mount…
在 Cinema 4D 中设计了一条时尚可爱的铰链蛇！眼睛是为多色打印预设的。A1 @mini 用户可以缩小模型以便于打印。希望你会喜欢它！~
…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…
Theese mouse lamps require E-14 socets that u can find in your local home depot (must be under 2.8cm diameter) but you can use any socket that fits. Print settings Use EXTRA THICK SUPPORTS for more stability Recommended to use PETG you…
Welcome to The Skeletor Collection —discover the evolution of the Skeletor project, explore each iteration’s unique enhancements, and find out how you can get involved. 📖 Want the full story? All MK7 details and project updates can be…
we can all agree, for many of us right now… it's hot as Balls.. and well, my balls are hot. WFH or just in for a gaming session, with your 5090 pumping out the heat of a 1000's suns. I needed something to keep the crown jewels from…
Qidi Q2 — Performance Cooling Duct (v5.1 & v6.0 Dual-Flow) Summary A high-efficiency part cooling shroud for the Qidi Q2 . This duct was precision-engineered using CFD (Computational Fluid Dynamics) to reduce turbulence and provide a…
Intercooler for Crocs. Add 6mm fuel pipes to connectors. Print 2 turbos, and superglue them together. : https://www.printables.com/model/317275-crocs-turbo
V5 Duct added, has better aimed cooling but i have not tested yet Rear mounted 5015 parts cooling duct for Sovol SV06 V3 released, cleaned internal geometry, made the mounts work better and gave the duct better clearance 2 M3x20 bolts and…
Simple nozzle cooling air duct modification for Ender 3 Neo or Ender 3 V2 Neo, to provide improved and even cooling from all sides. Very clean and simple print with no supports needed Still a work in progress but works for me nicely Edit:…
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Creality Ender 3 / Pro / V2 (?) --- I can only assume this could work for the V2... don't have one to test with. Part Cooling / Hotend…
Here you have Santa with sunglasses. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI generated and i optimized…
Key Features: Efficient and balanced cooling. Lightweight, 6.5g compared to 31.8g of the stock toolhead. Less load on X Axis bushing springs. Decent cable management, you can hide it behind the fan. Must be printed with heat resistant…
Remixed it to save 10 gramms and maybe better airflow. Test it yourself too!
Designed and 3D printed a stand for my Mini 3 that has a small 40mm USB fan on it to keep it cool while transferring data and updating firmware. Works real well. It also all unclips apart so it can be put inside most carry bags. Used…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
hi, this is my desing of a creality ender 3 cooling&mount for an e3d v6 hotend you will need: 1x 50x50 fan 1x 40x40 fan 11x m3 bolts 3x m3 nuts The hotend can have additional coupler on the top, there is enough space to fit everything you…
The perfect lightweight cooling setup for your new Ender 3 V3 SE.
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Cooling system to replace stock CS of Creality K1. No major geometry changes, just optimized for FDM printing. ========
Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…
I needed a chip and coolant fan for a couple of my jobs. So set out to design and print one. I have been running this one at 14,000 RPMS for about 10 weeks now and have zero issues. I am using an 1/2" ER 20 collet. Can be run on most CNC…
Remixed the Annoying Gift Box by u: LittleCoolBomb : sized in mm. separated the lid from the threaded tie segment. provided split bow for easy, support-free printing. added clearances of 0.3 mm for the tie segments. provided a faster…
