74 modeli
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…
After I changed nozzles to a slightly longer nozzle, the nozzle would crash into the bed when homing/probing. I designed this spacer to offset the probe slightly to compensate for the extra nozzle length. The spacer is 2mm thick which…
Should work for both a BLTouch and CRTouch since the mounting holes are the same. Print oriented with the extruder-side mounting surface on the build plate. Supports are optional depending on how well-adjusted your printer is. I printed…
Starter kit for modeling your own Ender 3 Neo shroud. (took a lot to find.) Big thanks to everyone who supplied the files for this. (NOTES) You must orient this to your personal measurements. This is not oriented dimensionally together…
Creality Sonic Pad G-Sensor for CR Touch or BLTouch Mount for Ender 3S1 or Upgraded SpriteExtuder upgraded Ender3v2. Y-axis zero offset. Prove offset: x_offset: 40 y_offset: 0 Links: JST 1.25mm both female 5pin cable:…
Użyj metalowego drewna crtouch, które znajdują się w zestawie z interfejsem.
This plate will let you put a Dragon Burner tool head onto an Ender 3 X carriage (or any printer with the same plate [probably™]). Printing: Something with a higher temp resistance than PLA should be used considering how close it is to…
Original model is Ender 3 | Dual 5015 Fan Duct by Simon_Szi_ I modified below. 1, I added a mount for CR touch. (close enough to the genuine CR touch mount location) 2, Enlarged mounting holes so that we can adjust the fan height up or…
Simple adapter to mount a BIQU / BTT Microprobe to your existing CRTouch bracket.
Broken CRTouch case due to dive? Print a new one :D NO SUPPORT NEEDED! Material: PLA /0.4mm nozzle
Version Slim y mejorada
This is a lightweight Sherpa Mini extruder mount/holder/bracket for Ender 3. Compatible with Creality CrTouch. It is small and light. This is my own desing and I printed it from ASA filament. You may use any filament that resist high…
**UPDATES** 6/29/2023 I fixed the path that the m3 square nut/ hex nut slides into to mount the Mini-SB to the mount I had created a custom mount for the Mini-Stealthburner toolhead for my heavily modded Ender 3 v2. When I decided to…
Allows you to not have to take the CR Touch off to take resonance measurements for Sermoon D1 with Sonic Pad for Klipper. This is a remix of the below two designs. sermoon d1 adxl 345 mount by PA3MA - Thingiverse Sermoon D1 CR-Touch mount…
Mount for a CR Touch on the Satsana hotend fanduct. Remixed because my nozzle was crashing into the bed. Lowered the CR Touch by 2.5mm compared to the original mount.
CRTouch or BLTouch mount for CR200B. Its a Remix of the Realy good model from Bastelgarage (Danke). I Remixed it for Cablemanagement. I Printet it with ASA and put some inserts in.
This is a remix of another excellent remix, just to add the CR touch to the build. This version is only for Ender 3 / Pro, not V2. Update January 31: tried to install it on my printer but i found that the heated block is a little bit…
I created a mount for the Mini-Stealthburner fan shroud and orbiter 2.0 extruder. I intended for this to be for my heavily modded Ender 3 v2. I decided to convert my Ender 3 v2 to a Voron Switchwire Style Core XZ printer. It also features…
Remix of satsana to fit dragonfly bms hotend with 5015 cooling fan Fitted for ender 3 pro only as thats what i have….will fit any printer that uses the same x carriage as ender 3 pro probe offsets are: x-53 y-15
I tried other mounts and they just didn't fit with my CRTouch so I made this. Works well for me. This has spacers for the CRTouch wire so it will work with either the BL or CRTouch.
A slightly stronger version of the original, with more space around the bolts and more material holding the CR touch in place
Low-profile X-axis limit switch mount You will need this to fit zero Y offset CR touch probe mounts like the MAXPROBE backplate on your Creality CR10 Smart Pro Features Low profile Uses original components and fasteners Fully reversible…
So my problem was that BMG clones didn't grip the heatsink hard enough and the whole thing sways side to side with the slightest touch to blobs or overextrusions and I wanted to stop that, so I designed this to be super rigid and it has…
Moves the CRTouch location to 0X, 44Y offset. Fixes variance slop due to the carriage shifting during a print. I found the reference model improved the original but still had to much flex that was affecting the auto bed leveling results.…
My 3D touch died and I still had a CRTouch lying aroung but the printer I needed it for has a EVA3 printhead with does for the CRTouch. So I made one.
This is an old design I made and still use on my ender 3 but it should be usable on any printer with a front mounted 4010 hot end cooling fan. It is adjustable by simply sliding it down and tightening the bolts. You can see it in my…
This is a remix of this model: https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion Important: You have to flip the bottom bolt of you original Ender 3 Carriage, so that your screw head is on the printhead…
Bracket for Roland vinyl cutter holder that uses crtouch mount points with longer screws. Tested only on Ender 3 Neo. Should be compatible with all neo series but I have no way to confirm that. It is made so that the bottom aligns with…
It printed just fine with PLA on my Ender 3. No supports were needed if positioned lying on the side. The layer height was standard 0.2 mm.
A quick and dirty remix of Jonathan Gahn's remix, now compatible with CRTouch Probes.
I printed and used the original, and all was well, until I needed to take this shroud off several times for working on the hotend. Over time the screw head got stripped out on the screw that's covered up down inside the shroud, and the…
allows for really good part cooling aswell as accurate and repeatable probing due to the 0 YOffset. default plate MGN12H
Remixed the holder to work with a Creality CRTouch insted of a BLTouch. The connector is in a different place and was blocked by the original support. You can use the M3*6mm screws that come with the CRTouch and screw them directly into…
Remixed E3D mount with a CRTouch mount by Dbarbs . Aligned the mounting holes and added tapers/reinforcements to allow for printing without support. Follows all the same instructions as the E3D mount just with the option to include a…
Just bought the Ender 2 Pro and Creality CR-Touch. No Mount that i can use with this printer in the Box. So, the solution: I found one here, plus my thought with the inserts in the two holes forwards (M3/6) and with Tinkercad I made…
Just took the great design by DevCyclops and made it adjustable to use it with generic Volcano Nozzles and the Stock K1 Style Nozzles. Does not work with Vortex Duct since it is to wide and will collide with the the CRTouch. BLTouch…
Might need to use some m3 washers to extend it down a bit
This is a design to help you figure out the correct probe offsets for your specific BLTouch / CRTouch mounts. The lines on the design should be 5mm apart, but it doesn't really matter because it's mostly just to be able to make sure you…
A simple mount for Pinda (or other) induction probes utilizing stock CRTouch holes on the Ender 3 Y-axis gantry. Parts needed: 3 x m3*8 (or longer, up to cca m3*12) hex screws 1 x m3 hex nut You then may wire the probe into the dedicated…
Printed in TPU so your settings for TPU will work I have made these with a 40% infill, 2-layer top and bottom with 4 walls but i don't see any other settings not working depending on your preference i have use 4 M5 nuts with spring…
This is a mount for a wide angle Arducam to be used with OctoCam. OV5647 5MP 175 Degree Wide Angle Fisheye Lens on your Ender3v2 Available here: IOV5647 Camera Module for Raspberry Pi 3B 4B 3B+ Adjustable Focus 120 130 200 160 Degree…
It works just like the stock BLTouch mount. This remix has a cutout for the wires to run through.
bltouch mount modified from this model: https://cults3d.com/es/modelo-3d/herramientas/5015-artillery-sidewinder-x1-dragon-mosquito-volcano-combo-duct only needed to make room for the cables and connector for crtouch, the distance between…
Print in PETG, ABS, or better Tree supports in spot shown if you want, or just bridge it and have it be a little messy. Recommend 4-5 perimeters for stiffness. Need 2 M3 screws to mount sensor and 2 M3 screws to mount bracket to…
CRTouch mount inspired by mount from @JonasBurkhard. Short variant is for precision positionig of probe with washers. Long variant can be used as it is. I also include modified Fan duct. Original duct and mount can be found here:…
This is just a simple remix of the mounting plate by a_shj. I don't have a BLTouch and instead have a CRTouch. I remixed the model to accomadate the top plug of a CRTouch.
This model should fit with hotends shorter than the Ender 7 standard hotend. Printed at 250/82, 100mm/s, no support
This mount tucks the probe as close to the nozzle as possible. SV06 style and SV06+ w/Volcano nozzle options. Below are my settings in Printer.cfg [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: 24.0 y_offset: -25.9 pin_move_time:…
The same fan duct mount but for CRTouch instead of BLTouch
Changes from Aaen's model: Notch for CRTouch plug Bottom roller nut now allows for wheel tension adjustment enlarged all the holes by 0.2mm for better tolerances Prints just peachy in ASA.
If you upgraded your Creality printer with Bondtech DDX + Mosquito hotend and you have a CRTouch, then this should be a suitable mount. Make sure to calibrate probe offsets, but with my Ender5 Pro, offsets are: x_offset: -29 y_offset: -4…
Quick remix to give clearance for CRtouch cable. Big thanks to Troche Hole for the great design!
This is an adaptor for the Anycubic Vyper to be able to support the general CRTouch Mount delivered by Creality. I've printed the part using a 0.4 mm Nozzle and with a 0.2 mm layer height. To assemble it I used some longer M3 screws to…
After almost one year of manual (and painful...) bed levelling I've finally got a crtouch for my ender5pro, but I had this printer upgraded to the microswiss direct drive (shortly after buying it), so I needed a mount which could fit my…
Remixed BLTouch/CRTouch mount to accommodate UHF-like hotends for the FrankEnstein V2 Toolhead. Lowered mount by 17mm. Used in conjunction with these ducts designed by wight554 and FrankEnstein V2 Dragon hotend mount for my Dragon UHF.…
This is a magnetic mount that sits atop a CRTouch/BLTouch and compliments the ADXL345 mount made by motocoder at https://www.printables.com/model/165292. I used 5mmx3mm magnets and the through-holes are just big enough for a M3x8mm screw…
Printed in 0.2mm infill 25% PLA from Wanhao with a Ender 3 V2
Found a CRTouch for cheap and needed a mount for my Longer LK5 Pro and while I found a design out there the mount was placed incorrectly so I designed my own using the model listed as a source as my starting point. I printed the original…
Infill: 15% Material: PLA/ABS Supports: No need Nozzle: 0.4mm Print time: 44m
This is an extended arm for this camera mount with a case spot for a raspberry pi zero. Category: 3D Printer Accessories
M3 heat inserts will be needed for the CRTouch/BLTouch mount. I reccommend printing with PETG, but if you use PLA increase the wall to 3 or 4. Supports will be required, use tree slim and tree auto. If you try anything else, let me know…
Right panel Crtouch mount for the KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon. Print in ABS recommended.
This is a block I printed in PETG to go between the Sprite Extruder Pro and the Creality Linear X Rail on the Ender 3. This shifts the nozzle forward a bit, and I had to account for this w/ how my bed was mounted and where my endstops…
The CR Touch has its cable connector on the top unlike the BL Touch which has it on the side. The original part from mediaman was remixed to allow for the change. This allows the CR Touch to be used on a Mutant mobile mounting plate with…
El cobertor está diseñado para: Tapar el espacio superior que tiene el CRTouch. Ocultar el excedente de los tornillos. Mantener el conector del CRTouch estable. La instalación se hace pasando los cables del CRtouch por el espacio de forma…
I printed multiple covers, but none of them worked with the CR Touch. I also wanted to have the Ender logo on it, so I found this model on Printables and cut the logo into it. Enjoy!
For anyone wanting to change over from the stock inductive style bed sensor to a more common CRTouch. You will also have
I got annoyed that I couldn't find a CRTouch probe mount that Worked with a volcano nozzle Didn't interfere with fan mods Had low profile for maximum bed printing space So I made my own. I used supports for the side two overhangs, can…
El cobertor está diseñado para: Tapar el espacio superior que tiene el CRTouch. Ocultar el excedente de los tornillos. Mantener el conector del CRTouch estable. La instalación se hace pasando los cables del CRtouch por el espacio de forma…
