Wyniki wyszukiwania: cutouts

Sortowanie

161 modeli

P
PrintablesDean Rogers

Geodesic Dome Cat House - Pine Tree Cutouts

This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…

Pobrania
8548
Polubienia
7916
Ocena
4,92
P
PrintablesBrett

Parametric Box with Hexagon Cutouts

This is a fully parametric, lidless box that I made as an exercise to learn how to use OpenSCAD. Parameters that can be changed include: box dimensions, wall thickness, corner roundedness, hex radius, and which walls of the box have the…

Pobrania
8316
Polubienia
1802
Ocena
4,8
P
Printablesweissi

Remix - Parametric Box with Hexagon Cutouts

Remix adds hexagon cutouts in bottom and lid, also with cutouts

Pobrania
1029
Polubienia
103
Ocena
4,82
P
PrintablesMax Theimer

IPhone 12 case with button cutouts

Works great in PLA, PLA+, and PETG, would recommend printing at ca. 103%Z-scaling so the phone fits properly. Bonus-Tip: If you print the case with 10ish vertical shells, but 0 top and bottom layers, you can let the infill (e.g. Honeycomb…

Pobrania
542
Polubienia
30
Ocena
5
P
PrintablesjSamz12

HSW- Wall Cutouts

unless you have a whole wall of HSW, having 2 or 4 paels of HSW on the wall can kind of look random or out of place. So i cutout pieces from the HSW to add to the corners of your main panels. It will give the impression that your panels…

Pobrania
484
Polubienia
106
Ocena
0
P
PrintablesFAN 3d studio

Box with Hexagon Cutouts

There are many different sizes, both in width and length, and in height, and yet the hexagons are modeled the same in all models and of course they still remain symmetrical.

Pobrania
350
Polubienia
59
Ocena
0
P
Printablesphase3d

Nothing Phone (2a) case - REMIX with design cutouts

Remix of @DrCox_1746174's Nothing Phone 2a Case. Added additional cutouts and indents to mimic the original design of the phone. Also added cutouts around the volume and power buttons for easier access. Printed in Glow in the Dark PLA.

Pobrania
332
Polubienia
17
Ocena
0
P
PrintablesVash Baldeus

Ender 3 / Pro / V2 Z axis motor mount - T Nut cutouts

This is a remix that was born for the purpose of using this for dual z motor set up on an Ender 3 / Pro / v2. As the original method of mounting the 2nd Z axus stepper motor is similar to the stock one, which will cause issues with…

Pobrania
295
Polubienia
30
Ocena
4,5
P
Printablesthall72
Pobrania
221
Polubienia
34
Ocena
0
P
PrintablesSven

Raspberry Pi Zero W Snapcase with Cutouts

SnapCase for Raspberry Pi Zero W Dimensions Designed to accomodate an Raspberry Pi Zero W board. Design Process The goal was to create a neat and quality case for the Raspberry Pi Zero W. It should be easy to print and use the minimum…

Pobrania
208
Polubienia
26
Ocena
0
P
Printablesjpbruce

Record Vinyl Coasters - Holder with deeper cutouts

I remixed the original holder with some deeper cutouts so that you can more easily grab an exact number of coasters.

Pobrania
207
Polubienia
50
Ocena
4
P
PrintablesChevyMonster

20 Sided Dice, Hollow, Face Cutouts, 25 mm Tall

It will print without supports. Mostly.

Pobrania
206
Polubienia
7
Ocena
0
P
Printablesm_collectable

Low-Poly Hearts with Lattice Cutouts Makeup Holder - Lovely Vanity Organizer

A stepped makeup organizer with four compartments of different heights for lipsticks, brushes, palettes, and everyday cosmetics. From above, the outer walls form faceted low-poly hearts. The sides use a repeating regular heart lattice so…

Pobrania
199
Polubienia
62
Ocena
5
P
PrintablesRebelthor

ESP32 C3 Supermini Case with Pin cutouts

An ESP32 C3 Supermini case that has pin cutouts so you can use breadboard wires.

Pobrania
196
Polubienia
14
Ocena
5
P
Printablestrasba

Parametric Box with Hexagon Cutouts (optimized)

This is a fully parametric, lidless box based on Brett's model. I just optimized the preview in OpenSCAD which was not working for larger boxes. Changelog: 12/29/2025 - Optimized rendering for preview Print instructions (orig. from Brett)…

Pobrania
190
Polubienia
29
Ocena
5
P
PrintablesDingus

sure.t Mag - Improved Cutouts

I love printed mags. The sure.t mag by t4obrien is my favorite, it works great in most things. Unfortunately when I built a Crush I realized that the mag release cutout on basically every 3d printed mag differs pretty significantly from…

Pobrania
187
Polubienia
32
Ocena
5
P
PrintablesKyle

Modular Shell with diamond cutouts

I added diamond cutouts to the shell to reduce material used while printing. Two versions: Large or small diamond cutouts.

Pobrania
181
Polubienia
17
Ocena
5
P
Printablesthall72
Pobrania
176
Polubienia
34
Ocena
0
P
PrintablesDigitDullness

Skeletonized Flipper Zero Case With Carabiner Ring And Port Cutouts

My magnum opus. A skeltonized case for the flipper zero featuring cutouts for all ports. This case was one of my first designs so sorry if its a little janky. PRINT WITH FLAT SIDES FACING THE PLATE. Infill: 100% Supports: YES Adhesion:…

Pobrania
174
Polubienia
23
Ocena
5
P
PrintablesFAN 3d studio

Box with Hexagon Cutouts

Box with Hexagon Cutouts

Pobrania
169
Polubienia
20
Ocena
0
P
PrintablesBri0nac

Raspberry Pi Zero 2 W Case with Heatsink & GPIO Cutouts (LED Power/Ground) for Prusa Mini

Modified case top and bottom with 5v and ground GPIO pins cuts to power my LED light. Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips (Clip_wire_interlock) Parts Needed 4x M2.5 screws

Pobrania
164
Polubienia
12
Ocena
5
P
PrintablesBenBreaksThings

Slim Azul Tray, hex cutouts

In the land of Prusa, everything gets hexed, including game insert bottoms.

Pobrania
161
Polubienia
15
Ocena
5
P
PrintablesdRagnar

Minisforum UM690 case bottom with fan and vent cutouts. (Fusion 360 .f3d included)

I recreated a model sent to me by ThomAce Van Doom on the Minisforum Discord. Included is a Fusion 360 file which is fairly unoptimized, but it should be enough for someone to modify it to their use case. Included is also an example .3mf…

Pobrania
156
Polubienia
9
Ocena
0
P
Printablesoriddlero

Solder Spool Holder With Magnet Cutouts for MEtal Plate Solder Stations

Added cutouts for magnets, use as many as you like to make it as strong as you like, the magnets should just press in, however, a touch of crazy glue make them permanent. These magnetic “helping hands” solder station are truly badass if…

Pobrania
154
Polubienia
36
Ocena
4,67
P
PrintablesSparq

Tesla Model 3 / Y Backlit Modular Tray Remix - Longer & Rear Cutouts + Options

Great original model - but I wanted to remix slightly to open up use-cases to wider application. The idea of a clear back to utilize the light in the console is brilliant - but I typically don't use PLA for automotive applications or…

Pobrania
153
Polubienia
34
Ocena
5
P
PrintablesDenys Shevtsov

AlleyCat's Heltec T114 Pocket GPS Case [LED cutouts] [elevated user button]

Really like the original design by Alley Cat What I was missing - it's the heartbeat LED. Also, for my taste, USR button (bigger one) was too flush with case, so it was a little hard to press. Added a Little tactile bump on it. I added a…

Pobrania
149
Polubienia
26
Ocena
5
P
PrintablesJames

Remix: EZPass Toll Tag Holder w/Velcro Cutouts

Some minor tweaks to jimerb's original design Added cutouts to accommodate the Velcro on the bottom. Removed the little tabs on the sides because they are very delicate and don't do much. I used these radar detector suction cups; they fit…

Pobrania
147
Polubienia
24
Ocena
5
P
PrintablesDoug

Wine glass tea light lampshade with heart cutouts

A shade for a wineglass tealight candle with heart cutouts. This shade was meant to go over a wineglass that has a tealight in it. The model was designed for a glass with a brim outer diameter of ~66mm. Scale it to fit your glass. I have…

Pobrania
144
Polubienia
33
Ocena
5
P
PrintablesJ

OpenSCAD Parametric Item Container / Shell with Customizable Lightweight Cutouts (fully customizable) (HSW) (Honeycomb Storage Wall)

Hi everyone. I am very proud of this one and it has a lot of features. I made this to be used with my Honeycomb Storage Wall setups. As such, whenever I make a model I will simply create it through OpenSCAD, put it into Orcaslicer, and…

Pobrania
127
Polubienia
7
Ocena
0
P
Printablesfuchsr

Back rear corners with cable cutouts for Slack Lack enclosure

I have added cutouts to the Slack Lack bottom rear corner to run cables into and out of the enclosure, similar to how it's done in the original Lack enclosure. This is the left bottom rear corner and corresponding catch. Simply mirror the…

Pobrania
116
Polubienia
23
Ocena
5
P
PrintablesJason Englert

Core One Printhead Cover Left mod with cutouts for accessing heater and thermistor connectors

The Core One Printhead Left Cover with cutouts for access to the heater and thermistor connectors. There is a compromise I made between the ease of removing the connections, printability, and still functioning as protection of the rest of…

Pobrania
111
Polubienia
45
Ocena
5
P
Printablesgoaliemanshark

Tstak 2 drawer gridfinity base, with cutouts

The model didn't fit my tstak model (version 2) so I very crudely cut out the model in Prusaslicer and exported the STLs

Pobrania
111
Polubienia
32
Ocena
0
P
PrintablesChris Trotman

Sony a6700 Gridfinity Bin - With Peak Design Capture Clip Cutouts

I always leave the Peak Design Capture Clip plates on my cameras, but also wanted to use this fantastic gridfinity bin for the Sony a6700! I've added two different versions - one should fit the smaller Peak Design Capture Clip plates,…

Pobrania
110
Polubienia
17
Ocena
0
P
PrintablesJeffCurless

Pimoroni Display Pack Case - With cutouts for PICO(W)-H

No special print settings, I have printed approximately 40 of these for School… case works well with multiple students working on them.

Pobrania
104
Polubienia
11
Ocena
3
P
PrintablesdougRN

2U Server Rack Blank Panel with Hexagon Cutouts

This is a blank panel with hexagonal cutouts used to cover unused 2U sized openings on a 19" (482.6mm) server rack. You'll need to print 2 ends, 1 center, and 8 bowtie connectors for each panel. The bowtie connectors have a 1 degree taper…

Pobrania
103
Polubienia
12
Ocena
0
P
PrintablesDIYwithJJ

Electric outlet template for drywall cutouts

See youtube video for details:

Pobrania
102
Polubienia
18
Ocena
0
P
PrintablesKristianLaholm

Mobius intersecting with cutouts

A challenge for your printer. Mesh file in 2 orientations and step file with/without fillets. Give it a try printing and post your result Test print is ongoing ...

Pobrania
101
Polubienia
16
Ocena
5
P
Printablesfmai

Raspberry Pi IR nightvision camera case with heatsink cutouts

The original model is great but lacks the possibility to put heatsinks on the back of the IR-LEDs. I added two pockets with 11x11mm.

Pobrania
99
Polubienia
11
Ocena
5
P
PrintablesVeraxlon

Box with hexagon cutouts and lid

Box with lid that i made for learn Fusion360

Pobrania
99
Polubienia
13
Ocena
0
P
Printables7FM

Camera - ESP32 CAM (globe design) with SD & Flash LED cutouts

Modifications Front: Cutout for accessing the SD Card Cutout for the Flash LED Shifted Camera Cutout Modifications Back: Bigger Power Cable Cutout to support gluing of micro usb breakout boards Category: DIY

Pobrania
96
Polubienia
10
Ocena
0
P
PrintablesFAN 3d studio

Box with Hexagon Cutouts

Box with Hexagon Cutouts

Pobrania
94
Polubienia
10
Ocena
0

DB_Mount_CrealityMK8 v2 with proper insert cutouts

*Added cutouts for 4mm M3 Heat inserts, to mount the extruder to the toolhead. *Fixed orientation of the model, shortened the total length of the end prongs sticking out. (unnecessary, prone to breakage after printing in original model)…

Pobrania
93
Polubienia
7
Ocena
0
P
PrintablesShuriken

RC Wheel Loader CAT cutouts

Rear hatch with cutouts for CAT logos, they just need to be glued on to the hatch.

Pobrania
90
Polubienia
7
Ocena
0
P
PrintablesTomáš

Prusa MK4 bin with cutouts for anti-vibration feets

I have make cutout for true functional anti-vibration feet model from schuetzi99 . The cutout fits for MK4 standard feet with slip protection version (URL to the right STL). I have used the PrusaSlicer 2.7.0 only so the .3mf file is a bit…

Pobrania
89
Polubienia
19
Ocena
5
P
Printablesforsaken_candy

openGrid parametric generator w/ custom cutouts

DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…

Pobrania
88
Polubienia
33
Ocena
0
P

AIO Fan Spacer – 2mm & 4mm (Squircle Cutouts) 240mm, 280mm, 360mm, 420mm

AIO Fan Spacer – 2mm & 4mm (Squircle Cutouts) This fan spacer is designed to improve airflow efficiency and reduce turbulence when mounting 120mm & 140mm fans to a AIO radiator. It creates a small, controlled gap between the fan and the…

Pobrania
88
Polubienia
3
Ocena
0
P
Printablesaddictedtuna

Raspberry Pi Zero 2 W Case with Heatsink & GPIO Cutouts (LED Power/Ground) for Prusa Mini w/ repaired cracks

Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…

Pobrania
86
Polubienia
16
Ocena
5
P
PrintablesMB

Twin bottle cap - with cutouts for o-rings.

Tried original version, which worked great but was not really suitable for liquids. This is my humble attempt to fix that. Initial dimensions based on jebissey's twin bottle cap design ( https://www.thingiverse.com/thing:5482037 ). After…

Pobrania
83
Polubienia
8
Ocena
0

30mm Captured Ball with 16mm cutouts

This is my first submission while I wait for my MK3S+ to arrive. Expect great things.

Pobrania
79
Polubienia
17
Ocena
4,67
P
PrintablesSven

Arduino Uno Snapcase with Cutouts

* SnapCase for Arduino UNO * Dimensions Designed to accomodate an Arduino UNO board. Design Process The goal was to create a neat and quality case for the UNO board that protects it while still allowing access to all major I/O points.…

Pobrania
78
Polubienia
11
Ocena
0
P
Printablesrittme

Unifi UCG-Fiber 10-inch Rack Mount with cutouts

A remix of Unifi UCG-Fiber 10-inch Rack Mount by @Mauker. It's a version cut down into pieces to print without support

Pobrania
75
Polubienia
10
Ocena
0
P
Printableswillnewton

SSR relay cover with clips and cutouts

A remix of a remix! I added some cutouts near the connection points so it will clip properly if you are using plastic covered crimp connections or thick wires. Print Settings Printer Brand: MakerGear Printer: M2 Rafts: No Supports: No…

Pobrania
75
Polubienia
3
Ocena
0
P
PrintablesRadBench

Pixel 4a TPU Case with Cutouts for Buttons and Swiping

MisterIXI's model was the best one I tried and it works great. I just made a couple changes based on my personal preference. I cut out the button section because I like the 'clicky'-ness of the buttons and I cut out a section on the left…

Pobrania
75
Polubienia
8
Ocena
0
P
Printablesrmwphd

Encoder Knob Shaft Cutouts & Example Knobs

Here are models of the shafts of EC11 flat shaft and EC12 shorty rotary encoders, commonly used in the custom keyboard hobby. I've added a 1° draft to each shaft to make the fitment easier. Just grab your preferred format, bring it into…

Pobrania
74
Polubienia
8
Ocena
0
P
Printablesflamwenco

Voron 0.2 printed bottom panel with 4010 fan cutouts

I wanted to put stealth skirts with some 4010 noctuas on my V0, but the 4010s aren't compatible with bottom panels because of their height, so this adds some cutouts to the sides to allow for 4010 fans.

Pobrania
73
Polubienia
21
Ocena
0
P
Printablesthall72

Lego Compatible (3396.dat) Tile 2 x 2 with Two 1 x 1 Curved Cutouts

This model is compatible with the lego system.

Pobrania
71
Polubienia
15
Ocena
0
P
PrintablesJGFTW

Hexahedron - geometric cube with cutouts for decoration

Technically probably not hexahedron as it has more than six faces ¯\_(ツ)_/¯ Looks great while printing and on the desk as well. Gif from slicing: https://imgur.com/jWYKVmk

Pobrania
69
Polubienia
10
Ocena
0
P
PrintablesMaxR

S25 Ultra Camera Cutouts for Spigen Liquid Air Case

I made this because I prefer cases with individual camera cutouts. It should be able to be pressed onto the cameras when the phone is in the case. It sits tight enough to not fall out. When using a 0.4mm nozzle, make sure to enable…

Pobrania
67
Polubienia
7
Ocena
0
P
PrintablesRonFalafel

Oneplus 15 case with camera protection and button cutouts

If you just want a good solid case, print "OnePlus15BlankCaseWithCutoutsAndCameraProtection.stl" and "OnePlus15CaseCameraProtection-Thick.stl" I printed "OnePlus15BlankCaseWithCutoutsAndCameraProtection.stl" in 95A TPU and…

Pobrania
66
Polubienia
2
Ocena
0
P
Printablescliftoce

Clockwork 2 Main Body with ECAS & USB Cutouts

A simple combination of two mods to the Clockwork 2. I wanted a way to secure the PTFE tube (needed for use with the ERCF) but also a little extra space behind the cowling for a nozzle cam USB cable.

Pobrania
63
Polubienia
10
Ocena
0
P
PrintablesElectricblue71

HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro (remix with larger cutouts and provision for magnets)

9mmplease's hotend holder for the Flashforge Adventurer is a neat design as it allows easy access to the most common sizes of hotends. However I had issues printing the original hotend with my 0.6mm nozzle at a 0.3mm layer height. The top…

Pobrania
58
Polubienia
4
Ocena
0
P
Printablesvzom

The Crew: The Quest for Planet Nine Insert/Organizer - Added Cutouts

This is identical to this insert created by fuchsr , with a small modification. Two additional cutouts were added to the insert. The cutouts are to allow some extra space under the cards. This in turn should make it a easier to remove all…

Pobrania
57
Polubienia
9
Ocena
5
P
PrintablesJ

QidiQ2 Box Riser 70 mm Clearance with Side Cutouts

This is a modified version of the original riser, adapted to improve usability and access for my setup. I increased the clearance to the glass plate to 70 mm , which makes it much easier to remove the glass panel. It also provides enough…

Pobrania
56
Polubienia
13
Ocena
0
P
Printablesmillerhack

Nautilus Shell (Ursula Seashell without cutouts or ring)

Printables re-post of a remix I created and posted to Thingiverse on 2021-10-05: https://www.thingiverse.com/thing:4982218 TL;DR : this is a remix of Nautilus Shell by @tc_fea that has been scaled and mirrored to be identical to the…

Pobrania
54
Polubienia
2
Ocena
0
P
Printablesm_collectable

Clover Low-Poly Hearts with Lattice Cutouts Makeup Organizer — 4-Compartment Vanity Holder

A four heart clover shaped makeup organizer with low-poly faceted walls and a repeating heart cutout lattice. Four compartments of different heights keep lipsticks, brushes, pencils, and compact palettes sorted on a vanity. Open lattice…

Pobrania
53
Polubienia
22
Ocena
0
P
PrintablesPloique

GearHeart with cutouts

After Multiple designs, I wanted one that I could fidget with... I found it was difficult to spin the gears without cutouts. The full side cutouts didn't have the full heart shape when viewed from the top..... I made 3/4 cutouts for left…

Pobrania
51
Polubienia
12
Ocena
5
P
PrintablesFS5

Gridfinity 2x2x9 Hex Cutouts

Gridfinity 2x2x9 with hex cutouts. No magnet holes.

Pobrania
51
Polubienia
4
Ocena
0
P
Printablesblakewolfex

skull mask mod - personal fit with cutouts for electrical components

My Build Settings Material: PLA Layer Height: 0.2mm Wall loops: 6 Alternate extra wall Top/Bottom Shell Layers: 5 Infill: 25% Grid First Layer Speed: 50mm/s Speed of Everything Else: 80mm/s Slow Down For Overhangs Supports: Tree, On Build…

Pobrania
50
Polubienia
23
Ocena
0
P
PrintablesMichaellumos

Hek Lok with locking tab and M5 nut cutouts

Added a pip locking tab and M5 nut cutouts. Love the design!

Pobrania
47
Polubienia
6
Ocena
4
P
PrintablesBen090

Bit driver with relief cutouts and keyring hole

Remix of Bit driver Added relief holes and keyring hole

Pobrania
46
Polubienia
9
Ocena
5
P
PrintablesBracken

So Make It Swiss Army style keyring V2 with thumbnail cutouts

MarkBenson's mod of the the swiss keyring with the So Make It hackerspace logo embossed on one side. Printed example shown was acetone smoothed at 20C for 2 hours. Print instructions Category: Tools Summary MarkBenson's mod of the the…

Pobrania
40
Polubienia
5
Ocena
0
P
PrintablesBren

Tri-Bahtinov Mask for C6+Hyperstar with Celestron Dew Heater Cutouts

This is Cuiv's Tri-Bhatinov mask he designed for use with a Celestron C6 and Hyperstar, but with a cutout to support the Celestron Dew Heater. This worked well, along with recentering the corrector plate, to significantly improve my…

Pobrania
40
Polubienia
3
Ocena
0
P
PrintablesRonFalafel

Oneplus 15 Case with button cutouts

A remix of the Oneplus 15 case that has cutouts for all of the buttons.

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesMolybdenum

BentoBox Base with switch cutouts and wire management

Added switch cutouts for the switch I purchased from AliExpress , added two pass through holes for wires, and made a cutout in the back to have space for wiring. I should have purchased a 3-positition switch, but used 2 switches to allow…

Pobrania
39
Polubienia
12
Ocena
0
P
PrintablesMarius Beyer

box with circle cutouts for learning fractions

box has a sliding lid I glued one part to the corresponding place to have a sample piece I plan to develop an improved version. Please feel free to leave me suggestions for improvements.

Pobrania
38
Polubienia
8
Ocena
0
P
Printablesmpminiuser

Flat top Keycaps (MX Cherry) with cutouts for M2.5 screw head

My modified stl file holds 12 keycaps and 8 of those are modified with cutouts. Other keycaps were printed from the original STL file. The example in the photo were printed on a FDM printer with 0.2mm layer height. I am reprinting the…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesCor ten Hoor

settlers of catan bord rim with cutouts for trading ports

settlers of catan bord rim with cutouts for trading ports they adapt to the existing cardboard Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.12 Infill: 20% Filament: 123 3D Jupiter PLA Blue Notes: settlers of catan bord…

Pobrania
34
Polubienia
8
Ocena
0
P
Printablesjandj

Slim Beepy Case Front, with GPIO cutouts

Amended the existing slim flat beepy case - https://beepy.sqfmi.com/docs/3D (rev 6) - and added cutouts in the Front piece for GPIO pins to stick out

Pobrania
34
Polubienia
2
Ocena
0
P
Printablessteven.m25

EZPass Toll Tag Holder w/Velcro Cutouts Stronger

This is for the new generation of the NE US EZ Pass toll tags. There are a few holders here and they didn't seem to fit as well as I wished. The arms were a little thin and didn't really contact the EZ Pass as I wished. I don't know how…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesDaniel Duchrow

AI-on-the-edge Adapter 100mm with Cutouts

Simple Remix for bigger Watermeter (100mm), Lid-Cutout and another Cutout because of Water-Meter-Housing

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesJeremy Menefee
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
28
Polubienia
9
Ocena
0
P
PrintablesREDDLINE

ENDER 3 PRO - SKR MINI E3 V3 CASE PCB BACKSIDE PIN SOLDER JOINT CUTOUTS

So I originally printed out the SKR MINI E3 V3 Case created by MrTeliP, but when I installed by SKR Mini E3 V3 board it wouldn't sit flush in the case by either 1mm on one side, or by a 4-5mm on the other side. It looked like with my…

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesYO3GND

J4JXL remixed lever arms with magnet cutouts

lever arms now include a magnet cutout, and magnet holders for the screws are also included

Pobrania
23
Polubienia
2
Ocena
0

iPhone 17 DN40 Dock - Original Silicone Case WITH CUTOUTS - Made by: ScottYu-Jan and OVERWERK

Found this dock but discovered that it fit so well that the side buttons were registering as being pressed. I simply added cutouts for the power and volume buttons so they wouldn't get pressed.

Pobrania
23
Polubienia
1
Ocena
0
P
Printables3D_Frank

1/4 Sheet Paper Holder with Cutouts

I prefer to cut up recycled paper into ¼ sheets with a paper cutter instead of paying for sticky notes. This holder keeps everything together. Print settings: .2 Layer Height Wall Lint Count = 3 15% Infill 100 mm/s 6 hour print time 72g -…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesWillow (GHOST)

LEGO 2x10 Plate with Cherry MX Cutouts

A 2x10 LEGO compatible plate with 3 cutouts for Cherry MX Switches. You'll need keycaps that are not too much wider than the switch itself, due to non-standard spacing between the switches and boundaries of the lego plate (I used these…

Pobrania
22
Polubienia
3
Ocena
0
P
Printablessuomi35

fan-case R2 with extra material around the tab cutouts

The tabs broke off the fan case part while assembling the MK4S upgrade kit, despite treating the part with care. PCCF is quite brittle in these areas, so I decided to add some more material there, and fully enclose the outside of the…

Pobrania
21
Polubienia
1
Ocena
0

The box for drills of cutouts of stoppers

I ordered drills for the manufacture of wooden plugs in China. Unfortunately they came in bulk. I had to make a box for them. The result is a compact storage Please take a look at my page, maybe you will find something interesting for…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesDommett

Stackable box with bevel front AND arch cutouts to save filament

By using arch shaped cutouts, you will save on filament and printing time. This works fine if what you are storing is bigger than the arches. You can resize the box to your liking. I printed with PLA with 15% infill and they came out…

Pobrania
16
Polubienia
1
Ocena
0
P

Kurpie paper cutouts

This ornament is inspired by Kurpie paper cutouts. Originally, the ornament is cut from paper using scissors. It's characteristic of the folk art of the Kurpie Green and White Forests in Poland.

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesAlecks

Malolos Pi Case Wallmount with cutouts

I made this wallmount with sided cutouts for the Malolos Pi Case. Category: 3D Printer Accessories

Pobrania
16
Polubienia
2
Ocena
0
P
Printablesnicdiomaro

Hydroponic Tower Pipe Cap with 2 Cutouts

I needed a cover for my hydroponic tower that has cutouts for water lines to go through.

Pobrania
16
Polubienia
3
Ocena
0

Lengx Extended Butt Plate with Cutouts

Watch the original build video: https://youtu.be/jKdu9TzRMRw Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill…

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesChris E

USB Cable Spiral Ring Cord Organizer with Cutouts

An approximately 80mm diameter ring to accommodate a rolled up , wrapped, spiraled cord, rope, or string.

Pobrania
15
Polubienia
2
Ocena
0
P
Printablescanecanman

5 1/4 in drive bay cover with switch cutouts

Used for my indymill CNC mill. Cutouts for power switch, pause button (12mm) and spindle power switch.

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesJdsfighter

Raspberry Pi IR Camera Back Enclosure with Cutouts

The original design did not include cutouts on the back for the screws that mount the IR modules to the camera. This required the user to bend the front faceplate around the camera to get it to screw down. To fix that, I created 2 models.…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesPetr Dobry

Haribo 3030 X-axis with belt tensioner and cutouts for couplers

This is the remix of the original x-axis from Prusa with additional belt tensioner. If you have Haribo and original Prusa motors (with integrated rod), it works fine, but when you have steppers and Z threaded rods connected using…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesCheeseMcGee

CR-10 FANG OEM fan duct - V2 plate with M3 cutouts & EZABL

I use the EZABL addon and without an M3 nut, I didn't feel it was stable enough. After trying to hold a nut with tweezers into the small space available, I decided to throw together this quick remix. Apply a dab of superglue to hold the…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesElGuano

Apollo MSR-1 Case with GPIO cutouts

This is a modified case for the Apollo MSR-1 mmWave radar sensor from Apollo Automation. The MSR-1's pcb has solder pads for 5v, 3.3v, ground and GPIO/I2C, for great extensibility. But you can't easily solder leads to the pads with the…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesManuel Grohse

Endgame by Oldman with fixed angle and thumb cutouts

print with or without support, should be gucci either way

Pobrania
12
Polubienia
5
Ocena
0