Wyniki wyszukiwania: elrs

Sortowanie

244 modeli

P
PrintablesCraftyFPV

GepRC Mark5 ELRS Antenna Mounts

I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…

Pobrania
831
Polubienia
40
Ocena
0
P
PrintablesPlomek

Dual antenna, gps and elrs mount for Mark4 V2 frame

This is a dual-antenna, GPS and 2.4GHz elrs antenna mount designed for the 7/8/9/10inch Mark4 V2 frame. Antenna used: Foxeer Lollipop V4 Gps used: HGLRC M100, It may also be compatible with other GPS modules. The mount is ideal for…

Pobrania
365
Polubienia
10
Ocena
0
P
PrintablesVoxel3D_NL

GEPRC MK5D (Mark5) M10 GPS mount for DJI O3 / ELRS

I wanted to mount the HLGRC M100-5883 10th-gen GPS module to my GEPRC MK5D frame (Deadcat version). I could not find any mounts that use the stock antenna mounts, allowing for easy ELRS antenna and DJI O3 antenna fitting. Therefore I made…

Pobrania
300
Polubienia
12
Ocena
5
P
PrintablesMschivou5

Canopy for Firefly 1S FR16 Nano Baby Quad Analog V2.0 ELRS

canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.

Pobrania
299
Polubienia
22
Ocena
5
P
PrintablesT3000_FPV

Geprc Mark4 Antenna Mount Walksnail/ELRS

Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen GepRC Mark4 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an GepRC Mark4 frame. Print Settings Printer Brand: Creality Printer:…

Pobrania
298
Polubienia
12
Ocena
5
P
Printableshockeyrounds

Volador VD5 ELRS antenna mount RP3

use the trimmed vtx mount to have room for both fits as one assembly

Pobrania
257
Polubienia
14
Ocena
0
P
PrintablesflyOnMap

FPV SpeedyBee Mario 5 Custom TPU for XT60, Iflight GPS, 2 x SMA and vertikal ELRS Antenna

FPV SpeedyBee Mario 5 Custom TPU with follow parts: XT60 iFlight BLITZ M10 GPS V2 2 x SMA vertikal ELRS Antenna mount Short Video about this model you can find hier:

Pobrania
252
Polubienia
6
Ocena
0
P
PrintablesAshutosh Mishra

Geprc Mark4 ELRS Reciever Holder

Geprc Mark4 ELRS Reciever Holder

Pobrania
247
Polubienia
24
Ocena
0
P
Printablesmosch

Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder

Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder

Pobrania
225
Polubienia
14
Ocena
0
P
Printableshockeyrounds

ELRS antenna vertical mount RP3 RP1 5mm standoff

20mm tall, 5mm hex standoff. elrs rp1 rp3

Pobrania
222
Polubienia
10
Ocena
0

HEE WING T1 RANGER DUAL ELRS ANTENNA SUPPORT

An aesthetic and functional way to put the antennas of your Elrs Diversity receiver on your Hee Wing T1 Ranger. It is recommended to print on a flexible material, but it is also possible to print on PETG.

Pobrania
214
Polubienia
8
Ocena
0
P
Printableszielandy
Pobrania
203
Polubienia
23
Ocena
0
P
PrintablesP.I.Engineer

Radiomaster Pocket 2.4 ELRS antenna case

step file included with finishing fillets removed. go nuts rear cover is meant to be held on with dabs of glue.

Pobrania
199
Polubienia
26
Ocena
5

TBS Source One V5 GPS, VTX and ELRS antenna mount

Its my first try to build a mount like this, maybe some newer version will follow. Printed in TPU.

Pobrania
192
Polubienia
10
Ocena
5
P
PrintablesBoopidoo

T-Antenna Boom Mount CRSF/ELRS (Heewing T1)

Simple yet effective and secure tailboom antenna mount for T-antennas like the TBS Immortal T. Printed in PETG which is more flexible and durable than PLA. If you like my designs please consider donating a coffee or any amount really, I…

Pobrania
181
Polubienia
7
Ocena
5
P
PrintablesRodic

expresslrs ELRS antena vertical mount

elrs vertical mount hole is 6.1mm length 25mm you can modify it

Pobrania
174
Polubienia
7
Ocena
0
P
PrintablesNordfpv

Radiomaster Boxer ELRS antenna mod

A modification to the boxer to have a much smaller ELRS antenna. This modification requires you to open the radio to change the internal connection. Any damage is solely responsibility of the person opening the radio. Installation…

Pobrania
174
Polubienia
25
Ocena
0
P
PrintablesFAB1150

better ELRS DIY JR module base

This is a remix of the official ExpressLRS JR module bay. I noticed that the official one didn't fully lock into the JR module slot, and after a bit of tinkering I found out that the little clip is way too long, and doesn't engage with…

Pobrania
172
Polubienia
7
Ocena
0
P
PrintablesRiley Entropy

Radiomaster RP3 ELRS RX

Note that this module features antenna diversity, not true diversity. Credit for the excellent Radiomaster dipole antenna model goes to Silas Tvingsholm on Grabcad. Keep in mind that these antennas may be different from the ones you…

Pobrania
169
Polubienia
7
Ocena
0
P
PrintablesYoufu

ImpulseRC Apex EVO ELRS antenna holder

Impulse RC Apex EVO ELRS antenna holder, protects the wire antenna. Just like my other holder for the AOS3.5, bend the holder backwards and insert the ELRS antenna wires, then slowly put everything together. Print with TPU at 100% infill…

Pobrania
163
Polubienia
14
Ocena
0
P
PrintablesRiley Entropy

Jumper T-Lite V2 ELRS Folding Antenna Mount

Soooo I managed to break the stock antenna on my Jumper T-Lite V2, probably by tossing it in my backpack and yeeting that backpack into my car.... I opened up the radio and fitted a spare NeutronRC ELRS Dipole antenna in place of the UFL…

Pobrania
160
Polubienia
13
Ocena
0
P
PrintablesKoldKompot

ELRS antenna mount

Elrs antenna holder for the IFlight nazgul 5 frame or any other drone frame with 21.5mm spacing in the rear pegs. This fits T shaped antennas from Happymodel and Betaflight or similar receivers. Print with TPU for best durability

Pobrania
155
Polubienia
6
Ocena
0
P
PrintablesNiko Si

Mount for ELRS antenna

Mount for ELRS antenna on the side of the drone. I have it installed on the Apex Evo 5-inch frame

Pobrania
154
Polubienia
9
Ocena
0
P
PrintablesRyan

Quadmula Siren F3 O3 Antenna With Diversity/ELRS Antenna Mount

This is a 2 in one mount for your O3 Single Antenna and a spot to keep your elrs antenna in place! Print in TPU.

Pobrania
151
Polubienia
4
Ocena
0
P
PrintablesHitLuca

ImpulseRC Apex HD ELRS antenna mount

I haven't found an antenna mount that allows mounting my generic ELRS receiver to my Apex HD frame. Specifically, I'm using this receiver with the pictured antenna Just insert the hex standoffs into the printed piece, insert the antenna…

Pobrania
149
Polubienia
3
Ocena
0
P
PrintablesGuca

BETAFPV ELRS Nano EP1

BOX for BETAFPV ExpressLRS Nano 2.4 GHz EP1 20x20mm for M2

Pobrania
147
Polubienia
4
Ocena
0
P
PrintablesDrabulok

Skyzone Cobra S/X ELRS receiver cover

The new Fusion Board for the V3.3 Steadyview receiver in an ELRS version is a bit longer than the regular one. The standard cover doesn't fit. This is a custom made cover that fits the new ELRS Fusion Board.

Pobrania
145
Polubienia
8
Ocena
0
P
PrintablesCed Ric

TBS Source One V5 ELRS Antenna support

I did create an 2.4gHz ELRS antenna support for TBS Source One V5 frame. Print Settings Printer: Artillery Genius Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Any TPU Any Category: Hobby

Pobrania
138
Polubienia
9
Ocena
0
P
PrintablesMacNeill

TBS SourceOneV3 2.4GHz ELRS Antenna Mount

ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…

Pobrania
134
Polubienia
9
Ocena
0
P
PrintablesKetty

TBS source one v5 elrs double antena holder

TBS source one v5 elrs double antena holder. elrs model - Skystars ELRS 2.4GHz Nano Dual Antenna - https://www.rotorama.com/product/skystars-elrs-2-4ghz-nano-dual-antenna I'm new to FPV drones and don't know if it will work, not tested…

Pobrania
133
Polubienia
3
Ocena
0
P
PrintablesDavid

BetaFPV ELRS 2.4 Ghz T Antenna Clip

A simple and small clip which can be glued to the inside of your FPV plane to hold 2.4Ghz aerials securely in place without having to tape them down. The antenna used in the photo is from a BetaFPV SuperD diversity transceiver– The clip…

Pobrania
129
Polubienia
9
Ocena
5
P
PrintablesStella Risch

TBS Source One V5 T elrs antenna mount

A folding elrs t-style antenna mount printed in tpu. Works well with my betafpv elrs antenna, could also work for other antennas as well. Printed flat, installed folded around the antenna.

Pobrania
127
Polubienia
6
Ocena
0
P
PrintablesT3000_FPV

AOS5 Antenna Mount Walksnail/ELRS

Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen AOS 5 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an AOS 5 frame. Print Settings Printer Brand: Creality Printer: CR-10…

Pobrania
124
Polubienia
6
Ocena
0
P
PrintablesJPG Design

ELRS Antenna Holder/ Iflight Nazgul XL5 V4/V5

This is a remix. Changed it so that it fits in front of the Nazgul V4 and V5. Fits every other 6mm standoff. Dimensions from hole to hole are 24.5mm. It also fits in the back if you squished the arms together. I found out after printing…

Pobrania
124
Polubienia
9
Ocena
0
P
PrintablesH.Veenstra

30x30 ELRS receiver holder.

Printed in Esun tpu 95A. got a little guide for antenna cable and a hole so you can see bind light of the RP1.

Pobrania
123
Polubienia
6
Ocena
0
P
PrintablesYoufu

AOS 3.5 ELRS antenna mount (Happymodel EP1)

Happymodel EP1 2.4g ELRS antenna mount for the AOS 3.5 frame. 4mm height at the standoff mounts, gives enough clearance for the VTX antenna mount. Print with TPU, 25% infill, 5 perimeters. Bend the two halves of the mount, then bend the…

Pobrania
123
Polubienia
18
Ocena
0
P
PrintablesBacon2002

Toothpick canopy (HDZero - ELRS PP / EP2)

Toothpick / micro canopy, this is a light, strong and versatile canopy - 25.5 x 25.5 mounting points. The canopy houses components: HDZero nano HD camera New Sport version - (Canopy2021sport.3mf) lower profile canopy, improved mount for…

Pobrania
121
Polubienia
11
Ocena
0
P
Printablesscrappy79

Antenna mount for vista/03 air unit and with elrs antenna mount.

Made an antenna mount for vista/03 air unit and with elrs antenna mount for the source one V3 frame. There are two models, one for 25mm standoffs and one for 30mm standoffs. Print as is, i use petg for less flex, less vibrations.

Pobrania
117
Polubienia
5
Ocena
0

mark4 7 inch, xt60, vtx antena, elrs, gps holder/stand/mount

Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…

Pobrania
113
Polubienia
4
Ocena
0
P
PrintablesNuclearmistake

QAV-S mount for Axisflying ELRS antenna

Threw this model together to mount my T-shaped ELRS antenna below the mount for my rhcp antenna, on the tail. I pulled the outer dimensions from pokey_fpv's mounts, but the model is otherwise from scratch in Fusion 360.

Pobrania
112
Polubienia
8
Ocena
0
P
PrintablesRussell Smyth

GPS ELRS USB Mount for ImpulseRC Apex EVO

Mount for Foxeer M10Q 180, USB port for Walksnail V2 VRX, and ELRS "T" type antenna on an ImpulseRC Apex. Works with Stock VRX antenna mount or any VRX atenna mount that is 6mm tall at the standoffs. Should work with other 18x18 GPS units…

Pobrania
106
Polubienia
6
Ocena
0
P
PrintablesBoopidoo

T-Antenna Mount CRSF/ELRS (Heewing T2)

Three variants for T-antenna mounts for the Heewing T2. One for the boom and for glueing to the side behind the wing. I made one variant to sit higher up so it can fit inside the Heewing T2 carrying case. The two foam mounts can probably…

Pobrania
105
Polubienia
4
Ocena
0
P
Printablestruglodite

RapidFire + ELRS Backpack Cover for SKY04

This is my remix of nogmasa's original rapidfire cover, to add room for ELRS backpack hardware. Here is a link to the original: https://www.thingiverse.com/thing:5182786 I used an RP1 elrs rx for my backpack. A DIY esp01f with…

Pobrania
105
Polubienia
2
Ocena
0
P
PrintablesBash FPV

Kayouloin ELRS mount vertical (RP3)

Kayouloin ELRS mount vertical. (RP3) Category: 3D Printing

Pobrania
104
Polubienia
6
Ocena
0
P
Printablesmat7ej

ELRS TX case cooler lid

This is simply a cooler looking version of ssombras Happymodel ELRS TX module case lid. The model for the case is the same as the original, except it is 2,2mm shorter, so that the lid sits flush with the radio. The space for the antenna…

Pobrania
103
Polubienia
4
Ocena
0
P
PrintablesRodic

ELRS TCXO EP1 DUAL MOUNT

The holes are 6.1mm in diameter. The distance between the holes is 25mm, and the height is 2mm. It is a build for the Mr. Croc frame, but it can also be used for other frames. Please print it using TPU filament !!!! I did in Ender 3s1 and…

Pobrania
103
Polubienia
2
Ocena
0
P
PrintablesTom_3D

Betafpv ELRS antenna project model

this is a 3d model to use for projects and such, it is an exact replica of the betafpv elrs antenna and you could use it

Pobrania
98
Polubienia
4
Ocena
0
P
PrintablesMerin Kumar SP

Cidora SL5 V2.1 ELRS (RP3) Diversity mount

I purchased a new Radiomaster RP3 elrs rx with diversity antenna. So designed this. So one antenna will be at back and horizontal and another also at back but vertical but with a 30deg angle. I tested and am getting very good coverage…

Pobrania
97
Polubienia
6
Ocena
0
P
PrintablesMcFly

Impulse RC Apex VTX / ELRS Tail / GPS M10

very inspired Remix :) for Apex. RP1 Antenna and RX Mount, M10 Gps Mount and Vista or o3 antenna Category: 3D Printing

Pobrania
96
Polubienia
5
Ocena
0
P

Mark IV Antenna mount for Analog VTX and ELRS RX

Analog VTX pigtail and ELRS antenna mount for Geprc Mark IV and clone. I was able to print without supports by using 25% gyroid infill printed before walls. Any material I have used seems to work fine but 98 hardness TPU would be ideal…

Pobrania
93
Polubienia
4
Ocena
0

ELRS EP1 Antenna Mount for 20mm Standoff

Remix of the Tracer antenna mount for the QAV-S JB edition. Fits 20mm standoffs. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 25 Filament: Sainsmart TPU Category: R/C Vehicles

Pobrania
92
Polubienia
5
Ocena
0
P
PrintablesItay Sharoni

Radiomaster DBR4 ELRS Receiver Mount

Radiomaster DBR4 ELRS Receiver Mount with antennas lock

Pobrania
91
Polubienia
4
Ocena
0
P
Printablesenriverd

ImpulseRC Apex EVO RP1 ELRS and O3 antennas holder

Piece that holds the antennas for the DJI O3 Air Unit and the RP1 ELRS receiver and keeps them protected from being hit when crashing the drone. The piece has been designed for the ImpulseRC Apex EVO frame, but might work for any drone…

Pobrania
90
Polubienia
2
Ocena
0
P
PrintablesRodic

ELRS ep1 dual MOUNT FOR PT screw OR M3 screw

The holes are2.9 FOR M3 OR 1.5MM FOR PT VERSION . The distance between the holes is 30X30 mm Please print it using TPU filament !!!! I did in Ender 3s1 and slice it using Cura. The design was created in Onshape." If you have any further…

Pobrania
87
Polubienia
4
Ocena
5
P
PrintablesSpace

TBS Source One v5 VTX antenna and ELRS antenna Mount Low Poly

A mount for a lollipop antenna and elrs antenna made out of TPU.

Pobrania
85
Polubienia
4
Ocena
0
P
Printableslogging

Geprc MOZ7 - bumper / bumper with ELRS antenna mount

Bumper for Geprc MOZ7 frame. Two versions Just bumper Bumper with dual ELRS antenna mount Insert antenna into bumper can be little tricky because entry space is only 0.5mm. I used Happymodel ELRS antenna. For example antenna from…

Pobrania
82
Polubienia
3
Ocena
0
P
PrintablesAdamXT

ELRS Diversity Antenna Mount

I designed this mount while testing drone parts, since I didn’t have the space or time to properly mount my ELRS antennas. With this print, you can route the antenna wires through the holes provided, secure the T-antenna to the holder…

Pobrania
81
Polubienia
7
Ocena
0
P
PrintablesFeday

Mateksys ELRS-R24-P6 case

This case protects your mateksys ELRS-R24-P6 receiver, and makes it easier to mount to your RC plane or car. There are two versions, one for straight pins that come with the receiver (I didn't test fit this because I use angled pins.)…

Pobrania
80
Polubienia
8
Ocena
0
P
PrintablesPhilPhil

ImpulseRC Micro Apex ELRS-Antennaholder (Lightversion / Sturdyversion)

I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC ApexMicro ELRS-Antennaholder for 2.4G Radiomaster-Antennas How to Print…

Pobrania
78
Polubienia
7
Ocena
0
P
PrintablesStraylightFPV

PAVO20 PRO II TPU SET (Battery, ELRS, O4 PRO Antennas, Camera and Canopy, ViFly Finder Mini, XT30).

This is my full TPU set for the pavo20 pro II. It is designed to provide protection and longevity, since I use this as an actual cinewhoop for filming jobs. Adds some weight, for me thats worth it on a cinewhoop. If you want to freestyle…

Pobrania
77
Polubienia
8
Ocena
0
P
PrintablesJonathan_Ott

Folding ELRS antenna mount for TBS Source One V5 | Radiomaster antenna

Added recessed area for the “whiskers” of the antenna to exit instead of them getting squashed between the thick parts.

Pobrania
77
Polubienia
6
Ocena
0
P
Printablesrodsgear

Jumper T14 elrs 2.4ghz Low Profile Antenna mod

I don't like how the antenna takes some unnecessary space on the T14, since the original 2.4Ghz antenna is really small there is no need for that big enclosure. As long you don't use vertical polarized this mod would not cause any…

Pobrania
77
Polubienia
5
Ocena
0
P
PrintablesMupshot

ELRS EP2 baby-ape mount

this is a 100% copy of the basic holder from https://www.thingiverse.com/thing:4945742 . I added an 18mm mount to specifically mount to the standoffs on the Darwin FPV Baby Ape. print in TPU with no supports. Happy flying. Category: R/C…

Pobrania
76
Polubienia
6
Ocena
0
P
PrintablesHatsjoe
Pobrania
76
Polubienia
7
Ocena
0
P
PrintablesLuke Maffey

TBS Source One v4 Rear ELRS Diversity T Antenna Holder

A holder for HappyModel 2.4GHz EP1 Dual Diversity TCXO RX ELRS Receiver mounted at 90 degrees on the rear of a TBS Source One v4 frame. Printed in TPU.

Pobrania
75
Polubienia
4
Ocena
0
P
PrintablesPandadog

FPV ELRS Antenna & Module Mount

This holder is designed for securely mounting an ELRS module and FPV antenna on hexagonal rods. It fits rods with a width of 5mm, a center-to-center distance of 24mm, and a height of 20mm. Optimized for stable installation and easy 3D…

Pobrania
75
Polubienia
6
Ocena
0
P
PrintablesBastien Stefani

Bando Killer tail for M8.2 gps ELRS and Walksnail antennas

Hello, I made a new tail for my Lethal Conception Bando Killer v2 frame. It can accomodate a TBS m8.2 gps, 2 walksnail antennas and an elrs T 2.4 antenna. Update : improved the antennas support to better fit and handle the antennas.

Pobrania
75
Polubienia
2
Ocena
0
P
PrintablesEmpe

FPV Mark 4 5 inch - full body armor with DJI O3 and GPS + ELRS

Mark 4 - full body armor with DJI O3 and GPS + ELRS

Pobrania
74
Polubienia
8
Ocena
0
P
PrintablesSharmo

Sharmo - TBS Source One V5 ELRS + GPS + VTX Antenna Holder

Here is a single part that can be printed easily in one part that holds the VTX, Immortal T ELRS antenna and speedybee GPS in one part. This part is suitable for a GPS module that is 18mm x 18mm. If you need another size please comment…

Pobrania
73
Polubienia
4
Ocena
0
P
PrintablesPorco Rosso

ELRS antenna mount for Mark4

Support… yes, sorry :) wall 3 infill 35-50% Filament - any kind of flex (tpu, elastan, etc.)

Pobrania
72
Polubienia
9
Ocena
0
P
PrintablesMagic Aerials

Arm Mount for T-Style ELRS Antennas (eg: Rekon 10 Pro)

This custom 3D-printed tray is designed to house the Radiomaster DBR4 receiver in the dead center of the Rekon 10 Pro frame , positioned just below the 30x30 flight stack. The tray fits securely in the battery strap section, maintaining…

Pobrania
70
Polubienia
6
Ocena
0
P
PrintablesPolskiKrecik

Mark4 5"-7" 25x25 GPS + VTX SMA pigtail + ELRS antenna

I have modified this mount to fit a 25x25 GPS (Foxeer M10Q-250) and a beefier ELRS antenna. Works for both 5" and 7" Mark4 frames. It uses a 20mm M3 screw with a nut to secure two halves together. Print using PETG or ABS.

Pobrania
70
Polubienia
5
Ocena
0
P
PrintablesRiley Entropy

Happymodel EP1 ELRS RX

Happymodel EP1 ELRS RX

Pobrania
70
Polubienia
3
Ocena
0
P
PrintablesIPCreative

Flywoo Explorer O4 Pro ELRS Gemini Antenna mount

Flywoo Explorer O4 Pro ELRS Gemini Antenna mount, longer mounts for O4 pro antennas and elrs gemini dual band antenna. Printed with TPU with supports.

Pobrania
68
Polubienia
12
Ocena
0
P
PrintablesMr-J

Matek ELRS-R24-V Case

This is a case for the Matek ELRS-R24-V PWM receiver. There are 2 versions, one with space for populating the UART2 pins, and a more compact one without. Category: R/C Vehicles

Pobrania
68
Polubienia
7
Ocena
4,33

TBS Source One V5 ELRS Nano RP3 Receiver Holder

Goes at the back of the quad under the top plate and uses the stand offs for mounting. Designed to fit perfectly with my rear bumpers and vtx antenna holder stl's

Pobrania
68
Polubienia
0
Ocena
0
P
PrintablesBobbio

25.5x25.5 (M2) ELRS Nano Receiver Holder/Mount

A simple and lightweight holder/mount for small radio receiver. Designed to suspend the receiver and keeping it from touching other conducting parts of the drone (You should still use proper heat shrink and insulation though). Print with…

Pobrania
67
Polubienia
1
Ocena
0
P
PrintablesMarco Conforto

GEPRC mark4 5-inch m100 gps + VTX SMA pigtail + elrs antenna

This model allows an M100 gps to be mounted to the back of a Mark 4 5-inch GEPRC frame with also an SMA antenna pigtail and the elrs antenna. It also leaves space for the battery cable to pop out. Printed in PLA with 15% infill split in…

Pobrania
67
Polubienia
3
Ocena
0
P
PrintablesHamstersocke

AOS 7 front ExpressLRS/ELRS antenna holder

For the AOS 7 frame, holds a 2.4GHz ExpressLRS antenna. Print with the arms upwards to avoid supports. Cut the small parts on the cylinder to insert the antenna.

Pobrania
67
Polubienia
6
Ocena
0
P
Printablesrost

ELRS BetaFPV Nano RX holder for 25x25 frame

you know, no one likes frames full of zip-ties, especially blocking such a small receiver with a bit of adhesive is not a good job, so I created a support to hold the receiver over the VTX or any frame large 25,5 x 25,5 I used fiberlogy…

Pobrania
64
Polubienia
3
Ocena
0
P
PrintablesSeismograf

Kayoumini Crown+ELRS Backpack

This is a backpack for the kayoumini, the Happymodel Crown antenna, and an ELRS T-Antenna. An 18AWG power cable should fit on top, but I didn't test that. There's a short and a long version. The short one is a quick edit in Meshmixer,…

Pobrania
64
Polubienia
4
Ocena
0
P
PrintablesAssaf

Speedybee master 5 hd Front ELRS RX mount

Print from TPU, no supports. Mount with longer screws to the from of the frame use washers where possible.

Pobrania
62
Polubienia
4
Ocena
0
P
Printablessuprsaw

Source One v6 Radiomaster XR4 ELRS Antenna Arm Mount

Design Philosophy The design philosophy behind this mount is to fulfill as many placement requirements as possible. It keeps the antenna off the carbon fiber frame to reduce interference. It allows both antennas to be placed perpendicular…

Pobrania
61
Polubienia
6
Ocena
0
P
PrintablesMagic Aerials

Standoff Mount for T-Style ELRS Antennas (eg: Rekon 10 Pro)

This custom TPU mount is designed for a vertical T-style antenna and attaches directly to a standoff on your FPV drone. While it was designed specifically for the Rekon 10 Pro frame, it may also work with other FPV drones that use similar…

Pobrania
60
Polubienia
3
Ocena
0
P
PrintablesOliver

front ELRS mount for iflight FPV drones

my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports

Pobrania
59
Polubienia
5
Ocena
0
P
PrintablesawesomeArne

T antenna support (Elrs receiver)

T Antenna mount for Elrs receiver Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: Doesn't Matter Filament: Overture TPU Orange Category: R/C Vehicles

Pobrania
58
Polubienia
5
Ocena
0
P

Volador 3.5 elrs ep2 mount

A bomb proof mount for a (happymodel) ep2 receiver. EDIT: I made a LITE version of the mount, It's less than half the volume and thus half the weight.

Pobrania
58
Polubienia
4
Ocena
0
P
PrintablesPeter Petermann

ELRS and o3 antenna mounts for LHCXRC Cloud 160

But didn't TPU parts come with the frame? yes, and if those work for you, by all means, use them, the ones that were in my package had good quality. I've made my own ELRS antenna mount, as the included immortal-t antenna mount assumes a…

Pobrania
57
Polubienia
3
Ocena
0
P
Printablesredthemesetup

ELRS, VTX Antenna and GPS Holder for HSKRC XL5/6/7/8/9 Frame (or 27mm standoff spacing)

Print in the orientation shown in the slicer pic with tree supports. The softer the tpu the better since you will have a better time to fit gps in, as it's a tight squeeze Fits the HSKRC XL frames, as well as any frame that has a rear…

Pobrania
57
Polubienia
2
Ocena
0
P
PrintablesOrvo

GEPRC MOZ7 O3 BetaFPV front ELRS Antenna clip

I made this remix to be able to install the BetaFPV 2G4 T-Antennas to the front of the GEPRC MOZ7 O3 frame. The base is now a little thicker and there two holes for M2 screws with recessed heads (M2x10). This way you install the antenna…

Pobrania
56
Polubienia
3
Ocena
0
P
PrintablesTim Parnell

Demibot O3 Mount with camera protection and ELRS mount

work in progress, recommend to print with 5 walls and 50% infil

Pobrania
55
Polubienia
2
Ocena
0
P
PrintablesNoroNetwork

Impulserc Apex HD M80 Pro and ELRS antena

Hope it helps someone :) Mount for ELRS antena and M80 Pro GPS from HGLRC. Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500 perimeters insted Filament:…

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesCed Ric

HIGHTCULT & LOWCULT ELRS antenna support

I did create this ELRS antenna support for HIGHTCULT & LOWCULT frame Print Settings Printer: Artillery Genius Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 20 Filament: Any TPU Any Category: Hobby

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesNate DiSalvo

ELRS T Antenna Mount for 22mm Standoff Spacing

This is a simple mount for an ELRS Antenna. It was originally designed to fit on a Speedybee Master 5 HD below a mount I also made for a DJI O3 Air Unit antenna (Linked Below), but will fit on pretty much any frame with 22mm Standoff…

Pobrania
54
Polubienia
3
Ocena
0
P
PrintablesRalle Jacobsson

ELRS antenna mount (TBS source one V5)

ELRS antenna mount (TBS source one V5) My 2 front arms are just screws as you can see. Works just fine and the screws are covered by the mount.

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesMupshot

tbs sourceone 7in.V3 2.4. (ELRS, Ghost etc) antenna mount

T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesJPG Design

Iflight Nazgul V2/XL5 V5 ELRS antenna and Vista Cherry antenna mount

This is a remix. Changed the antenna placement for the Happymodel ELRS T-style antenna because the antenna comes really close to the props and chances are high that the props will suck the antenna in. I also removed some stuff that are…

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesCed Ric

Amax F5 - Vista Antenna Protection with ELRS

Amax F5 - Vista Antenna Protection with ELRS

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesLumbaLumba

GEPRC Сinelog35 Antenna Mount / Holder (ELRS)

Cinelog35 Antenna mount with ELRS ___ Cinelog35 Gopro 12 (9-12) Mount

Pobrania
50
Polubienia
3
Ocena
0
P
Printablesmstarzec

Elrs diversity antenna mount for wings

Elrs diversity antenna mount for wings

Pobrania
47
Polubienia
2
Ocena
0