1252 modeli
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
I have 2 geeetech 3D printers and ordered a few rolls of filament from them. After getting them and putting on the printer I soon realized that the outside of the roll would rub on the extruders and cause it to jump at times because the…
I created a BIGTREETECH octopus holder for Voron Switchwire printer Vytvořil jsem držák BIGTREETECH octopus pro tiskárnu Voron Switchwire
A minimalistic electronics enclosure to put the BigtreeTech SKR 1.4 in a box at the front of an Creality Ender 3. Print instructions Design goals: Under 2 hr print. No supports. Viewable faces flat on the bed for best finish. Reuse of…
a simple cover against resin odor, dust and as additional UV protection
Vodiace koliesko pred snímačom filamentu.
Fractal Design uploaded the files for their model on their website : https://www.fractal-design.com/north-pi-3d-files/ This is my take on the Fractal baby north. EDIT 3 of August 2024 Added a BBT pi 2 version (for the tray & foot use the…
I made this screen holder for my Voron 2.4 350, I printed another screen holder on here, but it really wasn't the quality that i was looking for with my Voron. It looked cool but I couldn't bring myself to use it due to screw alignment's…
here you have the CAD file for the EBB 36 CAN board hat If you want to buy this awesome tool board use this affiliate link http://shrsl.com/4t5zy and you will support our work
Made by the schematicd offered by the bigtreetech https://cdn.shopify.com/s/files/1/1619/4791/files/Eddy_Series_produc
Battletech stackable miniature storage tray 5x5, Stores 25mechs. Trays stack on each other It's stacking compatible with the 4x4 XL tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…
4Stk. M3Sx4.0 Gewinde Einsätze werden benötigt.
This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…
F3Z and STEP files
My first battletech scale terrain. Let me know what you all think.
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
A FINISHED MODEL IS NOW UPLOADED *DOWNLOAD “BTTPi_V1.0_TOP” AND “BTTPi_V1.3_CASE” FOR THE WORKING MODEL! BigTreeTech just launched their version of a Raspberry Pi! Well when new products are released, it gives people like us a chance to…
Bigtreetech u2c mount for Voron Mounting bracket designed for mounting a Bigtreetech U2C to the frame. Suitable for various printers. Files contains two designs one in voron style and one blank design Required material per hinge: 4x Self…
I recently put klipper on my ender 5 pro and wanted the same user experience on my ender 3 pro. Ordered the bigtreetech manta E3EZ board with cb1 and a TFT35 SPI V2.1 screen. There was no housing for the screen available at the moment so…
Simple bracket for SKR Mini series from BTT with threaded inserts. You can add the modified DIN-clip to put it on a DIN-rail, use it without the clip or just 3M VHB tape. Use at least M3x8 BHCS ISO 7380-1 screws to mount the DIN-clip on…
Print with Voron default settings. If you get problems with your threads, use higher fan speed. Don't forget the heat inserts from the original model.
Case display 7" HDMI BigTreeTech If you want to support my work, buy me a coffee PRINT SETTINGS: nozzle: 0.4mm perimeters: 4 infill: 15/20% layer height: 0.2mm Top/bottom layers: 3 I share the Step file with you, so you can remix it to…
::edit:: added images of both revised cases printed and mounted stacked with spacer between. rpi case has btt pi4b and cb1 mounted inside (fits perfect but doesn't have headphone jack) and the pico case has a pico board inside as well. so…
Why? I simply couldn't find an EBB 36 adapter for the LDO Orbiter 2.0 on EVA 3.x, but there was that ingenious mount from @ianwlg so I had to remix it.. ;-) My version makes use of the gained space of the Orbiter 2.0 by moving the main…
Battletech stackable miniature storage tray Small 4x2 and 4x1, Stores 8 and 4 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Store and sort your Alpha Strike cards Should fit sleeved cards Optimised filament use and printing time. No supports need, all prints on 1 build plate.
Voron v0.2 toolhead mount for Bigtreetech EBB36. Note: remote intergrated strain relief plate support before assemble.
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
This is left skirt which goes with https://www.printables.com/model/608317-btt-hdmi5-screen-mount-for-voron-24. Print Mirror for right side. Use skirt as per printer size.
Compared to the original model, it consists of only one part, which makes it much easier to fit the coil. This adapter adapts to the inner diameter ID (70-78mm) of various coils. I have tested it with GEEETECH, Jay-O, Giantarm and Sunlu…
Just separated for those who does not have CAD software
Hi I had a problem with my btt, when I used it, it always move and standing for long time near the printer, also dust was a serius problem for my btt, so I create a case to protect and move it without touching the board. I create also…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech ("BT")…
This is a simple design crafted and iterated over a day to find a suitable organizer when playing Battletech: Alpha Strike. I use 16mm movement dice to display the TMM of a mech, and thus I wanted a way to keep the facing correct on the…
In this video I will show you how to change your 3D printer back from a problematic auto bed leveling (ABL) system to the reliable mechanical end stop switch. It isn't much work and requires you to only identify the GND and trigger wire…
Battletech stackable miniature storage tray 4x4, Stores 16mechs. Trays stack on each other Its stacking compatible with the 5x5 REG tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…
This model was printed successfully on an Elegoo Mars 3. No base file included, but fits standard size battletech hex bases. Missile effects are a paid file and are not included in this kitbash, but are a very cool addition, link below.…
UPDATED 26/4 - added a lip to the top lid for better structural integrity Use M3x8 for the lid. (Requires M3 5x5mm threaded heat inserts in the main body). Space for a 40x40x10 cooling fan. 3 x 20mm ports for cables. Access to the USB and…
Designed this model to hold and support the BigTreeTech Manta M8P board uses the 4040 extrusion and T-nuts to secure it to the sides and back but will utilize the existing holes for cable management. It will be slightly tight to install…
Here is a superb TFT35 Bigtreetech LCD design for the Prusa Bear SKR project The rear arms are fixed to the bear frame with 4 M3x10 screws Important : Layers = 0.2 Perimeters = 0.2
Cooling Hood BigtreeTech Manta M8P v1.1 and v2.0 For CB1/CM4 with 60x60x15 Fan M8P. drivers with 5015 Blowerfan. And ziptie mountingpoints for esay wire wireing.
This is a stand for BigTreeTech KNOMI for people don't want to attach it to the hotend. KNOMI works via WiFi, just power it with a USB Type-C cable. Needed: 4x M3x10 or M3x8 screws Glue You have to be careful not to overtighten the…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Fan Cover to support BigTreeTech KNOMI. Easy to print, no support needed. Needs: 2x M3x8 or M3x6 screws to fix support to Fan Cover 1x M3x30 to fix Fan Cover to V400 effector with ADXL mount or 1x M3x25 without. The hole to fix the Fan…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech ("BT")…
Remix of PITFT50 Mount for the BTT PITFT50 HDMI by CannedBass https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/CannedBass/PITFT50_45_degree_mount BOM: 4x M3 Brass Inserts 4x M3x8 FHCS 2x M3 Hammer(T)-Nuts 2x M3x8 SHCS
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
A mount for https://github.com/bigtreetech/BTT-Pi Just use whatever M2 self-tapping screws you have.
This is a re-modelling of the community user supplied SFS 2.0 bracket model posted on the BigTreeTech GitHub. https://github.com/bigtreetech/smart-filament-detection-module/tree/master/V2.0/Community Mods/Voron2.4 Unfortunately that model…
No hardware is needed apart from the 4 OEM screws. Case The case has cutouts for all the screen's ports and buttons. It mounts on the screen with the 4 OEM screws. I also created a bezel to compensate for the thin gap on the bottom of the…
EBB36 GEN2 Mount for A4T Toolhead with Orbiter v2 / v2.5 Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. This is a remix of the original A4T THB mount from Armchair…
This design mounts the BIGTREETECH (BTT) ADXL345 2.0 accelerometer board (https://www.amazon.com/BIGTREETECH-Accelerometer-Klipp-er-Connection-Stealthburner/dp/B0CHJQ6CXF) to the bed of the MK3S+ or any bed that is under 5mm thick. Use a…
Hex base for battletech miniatures. It has the same dimensions ar modern originals. Full, or hollow from bottom. There are versions for 5x2mm and 6x2mm magnets. "Glue" is just a cylindrical cutout. "Pressfit" has a special hexagonal…
This is a custom mount that fits right onto the CB1 heatsink to mount a fan to it. The 4x holes for the fan needs to be taped (m3) theirs no room for brass inserts. Hardware needed 1X 3010m Fan 4x m3 x 14mm fan screws 4x m2.5 x 18mm…
BIGTREETECH Octopus PRO Cooler for Rat Rig 3x 4010 Cooler Fan support
Welcome to OpenHexTiles ! This is a complete modular terrain system designed to be 3D-printed with minimal fuss. It allows you to create dynamic, multi-level battlefields for tabletop games like Classic Battletech. All pieces are designed…
This is a quick and easy to print mount for the BigTreeTech Smart Filament Sensor v2.0 to attach it to a 2020 extrusion. My print settings were 0.2mm layer height, 20% infill, using petg. The sensor attaches to the mount via the 3 screws…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
Couldn't find a nice basic case so I designed one from scratch. Holes for SD and USB. Not sure if there is clearance for ESP-module or other cables than the flat cables shown in pictures. Screwholes sized for 3 mm screws.
Small piece, so I used 100% infill . Printed in ABS (2.36g). Fasteners 2x M3x8 2x M3x16 (comes with the eddy sensor) Version 3: Has holes correctly sized to fit brass M3 threaded heat inserts for fixing the Eddy sensor. Version 2:…
Battletech stackable miniature storage tray Small 2x2 and 2x1. Stores 4 and 2 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
I just got my first printer, the AD5X and know almost nothing about 3D printing or 3D design. I ordered a bunch of Geeetech filament and discovered the hole in the spools was way too large for the spindles on the AD5X. I downloaded 1…
Mount your BTT Relay board to a DIN rail. Requires four M2.5x8 screws.
…Please be sure to hit like & post a make, I'd love to see your prints! Add a BTT SFSv2 to your Voron with a neat & sturdy mounting solution. Extra parts required: x5 M3 8mm cap head bolts x3 extra BOM M3 Heat Set Inserts Find the…
UPDATE: Cable relief geometry fix in v5, cable is more centered now. Some other minor geometry fixes. Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using a WWBMG extruder . This is a remix of the…
Based on the fantastic model by BLaaR (which was based on his own paper model plans), I remixed a few parts, added some detail here - and there, slapped some MWO styled lasers in there and scaled it to be (~roughly~) inline with some…
mount for Voron / 2020 extrusion with 4mm panels print on the side, no supports required link to onshape document:…
Battletech Alpha Strike gaming ruler Works for any table top game Ranges: 1" 2" 4" 8" Catapult Mech logo Trigger finger guard to cowboy spin when landing those crits Optimised filament use and printing time. No supports need, all prints…
** modified DIN rail version coming soon, it's in the early testing stages to verify fit and design update (UNTESTED) but currently printing** Designed to hold a Manta M8P Mother board with or without the CP1 addon Printed in ABS test…
This is an easy mount for the BTT Octopus V1.1 Mainboard. It has 2 Holes to fix the Holder and then 4 Slots for M3 threaded inserts (I used them by ruthex).
The UrbanMech, revised for modern eye-palates. Pew-pew
BIGTREETECH TFT35 E3 V3.0 without logo (4 holes drill yourself to your size )
DIN rail bracket for Bigtreetech Relay V1.2 for Voron electrical compartment. Designed for use with DIN Rail Bracket - Heat Insert Version Smaller of two central board supports goes on mains side of board.
This is a display mount for a BTT TFT35 SPI to a V0. Two parts in total, around 1,5h print time. No supports, you still need to arange them yourself; Cover (stl name v02_spi_display_1 and blank) on its face and the mount itself standing…
I wanted a model of the Bigtreetech octopus logo for an upcoming project. I took a picture of the Octopus pro box and then inverted the colors. This picture was uploaded to Free online SVG Converter | PNG to SVG, Image to SVG…
I could not find an enclosure for the BTT_PITFT50 (BigTreeTech's Raspberry Pi 5" touch screen, so I modeled my own. It's a similar profile to the Prusa i3 screen enclosure. Requires 4 M3x6 bolts and washers to hold the screen in place.…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
A simple but effective pre-press to increase rosin yields and press more material at once. Optimized for the 51mmx89mm bags from Graveda. I did not make this model, it's just a reupload from Thingiverse:…
If you need a flat, tileable hex-grid for playing games like Battletech or Gloomhaven that need a ~33mm hex size (Flat to Flat) these are for you! Two versions: Hex Playtile: Can tile infinitely in all directions, it is symmetrical.…
Service Tools for Hopetech Brakes Print in ASA / ABS or PETG #Bikeregards
I'm converting an Ender 3 Pro to a Voron Switchwire and I bought the BIGTREETECH Manta M4P/M8P Control Board (https://biqu.equipment/products/manta-m4p-m8p). I needed a way to mount the board in the electronics area so I made this mount.…
It's a mount for BTT HDMI5 screen. It is designed to be mounted on Elegoo Neptune 3 Pro/Plus/Max It is designed to use M3 threaded inserts in the bracket with M3 screw to connect the screen case to the mount. UPDATE: You can now choose to…
This is a control board box for the BTT Octopus that fits the Ender 3 Pro and probably fits the Ender 3 V2 (but I cannot confirm). I didn't like the one or two options on thingiverse for this massive control board so I designed my own.…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
This design replaces the extruder idler with one that has mounts for the BIGTREETECH (BTT) ADXL345 2.0 accelerometer board (https://www.amazon.com/BIGTREETECH-Accelerometer-Klipp-er-Connection-Stealthburner/dp/B0CHJQ6CXF) for use with…
Decent, highly detailed Marauder that doesn't appear to have any flaws. Generated from a line drawing. NOTE: Someone who printed this using FDM did so with minimum supports but laid the model on its back.
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
For the Bambu Lab AMS, it makes sense to use a spool weight for almost empty and very light filament rolls so that the spool remains on the rollers of the AMS while the filament is being fed. For example the spool weight with integrated…
I wanted a way to temporarily mark mechs, so I made this clip-on hex base covers. Print in an assortment of colors. You might need to adjust the size based on your printer.
Two new buildings (Orbital Plasma Artillery and a Communications Center) along with six textured hex bases for your mechs (Rocks, Cratered Moon, Hills, Crystal Landscape, Alien World, and Dropship Deck). All models come in supported and…
After changing my Ender 3 S1 using Klipper, I also had to change the Stock-Display, because it became unusable. For the BTT PITFT50 Screen Mount , found at: https://www.thingiverse.com/thing:4800945 , I created a holder to change the…
I needed a mount for my Manta M8P for my Switchwire (Ender conversion). Due to size constraints, I originally designed the 4020 mount, then switched to 2020. There's one quirk which I'm unsure of: The camera/display ports sit under the…
The aim was to make 3D top and paper walls that's quick to pop up and doesn't take up storage space. Not sure if I want to take this further as it was more work than I imagined. I'd imagined, hex, L and H shaped buildings. This is the 2nd…
Hex bases (1.25” / 31.75mm from flat edge to flat edge) for BattleTech or other similarly scaled tabletop wargames. Comes in 1, 2, 3, and 4-base configurations. nonPareil institute is committed to building better futures for adults with…
