Wyniki wyszukiwania: gid

Sortowanie

Liczymy pasujące modele…

P
Printablescedarrapidsboy

Rigid Case for the Galaxy Tab S6 Lite

A half-shell case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface. Hard shell design: Fills-up the MK3S build space (1-2mm to spare) Prints…

Pobrania
1037
Polubienia
60
Ocena
5
P

Rigid Bit Holder LTT Screwdriver (60 bits, parametric)

This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…

Pobrania
558
Polubienia
68
Ocena
5
P
Printableshibble

Rigid cable floor trunking

Needed some non-trip cable floor covers. Most coiled rubber covers do not lay flat, and silicone is too soft to protect cables from heavy downwards pressure e.g. electric wheelchairs. ‘Prusament Galaxy Black’ works well to hide dirt from…

Pobrania
446
Polubienia
61
Ocena
5
P
Printablescookiecrook

Shop Vac Attachment Mount for 2.5", 1.25", and some 1.875" (1⅞" Ridgid)

PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…

Pobrania
326
Polubienia
94
Ocena
5
P
PrintablesAtelier CK

Pixel 9a phone case for PLA/rigid filament

Minimal, snap-on case for Pixel 9a designed for rigid PLA. Combines a 25% gyroid infill with 4 perimeters for flexibility and strength. Snaps on easily, stays on well, removes and reattaches without damage to phone or case. Prints in 1…

Pobrania
322
Polubienia
19
Ocena
4,2
P
PrintablesTache

CAMLOCK Adapter for RIDGID Hose (OD 43.50 mm)

This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…

Pobrania
317
Polubienia
66
Ocena
5
P
PrintablesxLrc

6" Air Conditioning Flexible Hose Adapter to 5" Rigid Ducting

This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…

Pobrania
284
Polubienia
18
Ocena
0
P
Printableszuberio

Ridgid Trim Router Vacuum Hose Adapter

Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…

Pobrania
250
Polubienia
41
Ocena
4
P
Printablesczechyour6

Ridgid Battery Holder

A few mods to this very handy battery holder. Raised logo on front you can blast it with a sharpie / paint pen to save time on multi color print. I think 15% infill is enough if your doing 3 perimeters

Pobrania
201
Polubienia
11
Ocena
0
P
Printablessteve457

Rigid Blower Stubby Nozzle

This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…

Pobrania
175
Polubienia
16
Ocena
5
P
PrintablesDocScott

Ridgid R2601 Random Orbit Sander to shop vac adapter

When using a sander, I prefer to connect it to a shop vacuum to keep the dust in my shop under control. The collection bag provided with the Ridgid R2601 random orbit sander can't collect all the dust and a shop vac (equipped with a HEPA…

Pobrania
151
Polubienia
19
Ocena
0
P
PrintablesKobraC0mmander

Ridgid Tool Logo

3 versions of the logo. Easily scale up to 200-300%. 100% is doable but on the small side. Layer Height - 0.2mm Infill - 20-30% (probably can be lower)

Pobrania
143
Polubienia
20
Ocena
0
P
PrintablesWeekdayWeekend

Ice Scooper Holder for Frigidaire EFIC117 Ice Maker

WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…

Pobrania
136
Polubienia
17
Ocena
5
P
PrintablesCYUL

Frigidaire 131965300 Dryer Knob

The original button broke. Replacement cost is prohibitive (30$ on Amazon !!!). Category: Replacement Parts

Pobrania
114
Polubienia
8
Ocena
5
P
PrintablesDik Harrison

Camlock Adapter for Rigid hose locking mechanism with FreeCAD file

I like the idea and design of the SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH by PeterH, but after printing it with PLA and 0.3mm layers, the hose connector and the male adaptor would not fit together. So I redesigned the male…

Pobrania
54
Polubienia
12
Ocena
0
P
PrintablesGizmo Gurus

DriftJug Mini – The Rigid, Reusable Bottle for Self-Watering Pet Bowls & More

Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…

Pobrania
31
Polubienia
9
Ocena
0
P
Printablesmrprometheus

Tow rope pulley guides for cheap rigid casters

We made a diy tow rope for sledding/skiing/snowboarding in our backyard. Recently we upsized our rope from 3/4" to 1 1/8". The larger size required larger pulleys. Things started to get pricey scaling it up so went with hacking together…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesJohn Hall

CLICKbase: a no-magnet, latching Gridfinity baseplate - all flush edges, easy expansion, very rigid

CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…

Pobrania
4334
Polubienia
655
Ocena
4,79
P
Printablesslavik kopanov

Rigid Molle Panel For Custom Organization V2.0

The Rigid Molle Panel For Custom Organization V2.0 is a remix of my model Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution: 0.20 Perimeters: 3 PEI magnetic sheet Bed Temp: 60c…

Pobrania
2131
Polubienia
1068
Ocena
4,93
P
PrintablesBarney Reynolds

Ridgid 18v tool holder

Fixed a tiny error the Ridgid tool holder model had, added another tool holder model to accommodate the belt clips some drills have (its usually better to shim out the regular size, but I wanted to print the whole thing) Also positioned…

Pobrania
1971
Polubienia
150
Ocena
5

RIDGID Tools Double 18V Battery Holder with Slant

RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…

Pobrania
1258
Polubienia
119
Ocena
5
P
Printablesslavik kopanov

Rigid Molle Panel For Custom Organization

I designed this Rigid Molle Panel For Custom Organization in SOLIDWORKS for the Printables Ropes, Cords & Straps Gear contest. Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution:…

Pobrania
1233
Polubienia
385
Ocena
5
P
PrintablesKomitadjie

Ridgid Oscillating Belt Sander 4" Dust Shroud

This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor…

Pobrania
1025
Polubienia
103
Ocena
5
P
PrintablesChadam

Ridgid 18V Battery Holder

I was looking for a battery holder for my 18V Ridgid tools, but what I found rely on friction or orientation for retention. So I made one that has a positive retention to use for something more mobile, like pack out cases. The fit is snug…

Pobrania
944
Polubienia
86
Ocena
5
P
Printablescyberbobcity

Ridgid Dustopper Shop Vac Cart Hose & Accessory Mounts

Parts I designed for my Ridgid Dustopper Shop Vac Cart. This lets you connect 2" PVC pipe to the wheels of the shop vac and also mount all the accessories and hoses to the cart as well. Please check out my video where I give you a tour of…

Pobrania
872
Polubienia
235
Ocena
5
P
Printablesshoooo

2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid)

Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…

Pobrania
851
Polubienia
161
Ocena
4,75
P
PrintablesGunpla Analyst

Ridgid Pro Gear Organizer Cup Dividers

Additional insert options and reduce wall thickness to cut print material/time by over 50%. Remixed from benjamenjohnson design, https://www.thingiverse.com/thing:3371609 , Naming scheme: # upper/lower (deep/shallow)_alt "#" - Number of…

Pobrania
849
Polubienia
188
Ocena
5
P
Printables05WEL

AEG/RIGID Battery Mount \ Breakout

AEG/RIGID Battery Mount \ Breakout You will need a couple of M3x10 bolt and nuts if you want to use the terminals and some of these connector + wire https://www.aliexpress.com/item/1005003770642780.html Updated new -…

Pobrania
774
Polubienia
71
Ocena
4,8
P
PrintablesPRohles

Table Saw Fence Upgrade for Ridgid Table Saw

Not Affiliated with Ridgid. Fixes the slight wobble in the ridgid table saw fence before you clamp it down. It replaces the two white plastic parts on the bottom of the table saw. If you use it let me know! it's a work in progress. I…

Pobrania
760
Polubienia
66
Ocena
5
P
PrintablesDraxxman

RIDGID 18V Battery Holder (snug fit)

This is a holder for a Ridgid 18V battery. The fit is snug and the back has a slight (5 degree) angle. It is intended to be mounted to a wall or the vertical face of a cabinet. This design has been updated to include a v2 that is looser…

Pobrania
752
Polubienia
64
Ocena
4
P
PrintablesYumanBeing

Tool Logos #1 (Ridgid, Craftsman, DeWalt & Bosch)

Logos for Ridgid, Craftsman, DeWalt, and Bosch Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…

Pobrania
739
Polubienia
132
Ocena
5
P
PrintablesRigid3D

Rigid3D Anka 1/10 RC Short Course Truck

Anka is a mostly 3d printed 1/10 RC Short Course Truck which is inspired and remixed from the excellent Tarmo4 project. (You may reach the Tarmo4 project's details from here .) If you are a terrible driver like me, this hobby might become…

Pobrania
738
Polubienia
130
Ocena
4
P

Rigid MOLLE panel

This is a molle panel that has holes for screws and optional spacers if you do want to mount with screws. Holes are large enough for paracord and can be mounted that way too. it also has slits if you want to mount using velcro and straps.…

Pobrania
730
Polubienia
217
Ocena
5
P
PrintablesShopTeacher

Ridgid Shop Vacuum to DeWalt Miter Saw Adapter

This model has been remixed to fit a Ridgid NXT 2.5" hose (2.25" OD at connector) to a DeWalt Sliding Compound Miter Saw - specifically model DWS780 but it will fit other models. Chamfers have been added to the vac locking mechanism and…

Pobrania
682
Polubienia
109
Ocena
4,33

RIDGID Tools Double 18V Battery Holder

RIDGID Tools Double 18V Battery Holder Double battery holder for RIDGID 18V Batteries. Simple battery holder for storage of your RIDGID batteries while not in use. This is a flat mount holder that requires external mounting screws. May…

Pobrania
671
Polubienia
83
Ocena
5
P
PrintablesCedric74190

Tactical rigid Molle Panel

Another tactical rigid MOLLE Panel. I add some hole in the panel to set something with paracord or mini-bungee. And a lateral fixation hole to couple more than one panel. The 4X3 fit in a Ender3 with something like 18x19cm, and for…

Pobrania
659
Polubienia
134
Ocena
5
P
Printablesrichspencer71

Ridgid Battery Wall Mount

Battery holder for Ridgid cordless drill batteries. Fits the 18v, possibly others. May fit other battery brands as well. See included profile.

Pobrania
631
Polubienia
100
Ocena
5
P
PrintablesYuriO

Rigid EBB36 v1.2 mount on Voron CW2 / Stealthburner - Tested on VT

This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…

Pobrania
621
Polubienia
64
Ocena
5
P
PrintablesRomeo D

Ridgid Tool Holder

This Ridgid Tool Holder can be mirrored to face your tools to the left or to the right. I hold everything from simple little routers to ½ inch impacts, grease guns, or anything that is heave. All work just fine. I printed it with CF-PETG…

Pobrania
620
Polubienia
112
Ocena
5
P
PrintablesJonathan Turner

OnePlus 13 - Ridgid Phone Case

OnePlus 13 - Ridgid Style Phone Case, the case extends past the screen and camera lenses to protect the from scuffing when places on flat surfaces. further more it has a pronounced ridge on the back for better grip. Warning can be…

Pobrania
615
Polubienia
27
Ocena
4,67
P
PrintablesTailslide

Ridgid Table Sander Second Dust Port and Shroud

This allows adding a second 2.5 inch dust port onto my Rigid sander. This better matches the airflow requirements for my 4 inch dust collector. If you see my 4 inch PVC dust collector project I have a splitter to go from 4 inch to two 2.5…

Pobrania
614
Polubienia
68
Ocena
5
P
PrintablesTerrywood02

Ridgid 18V Tool Mounts

Originally on Thingiverse but moved over. A few remixes still available on Thingiverse. Please do not sell these on Etsy/EBay/Facebook without arranging with me prior. I'm open to use but many people are not attributing it back and this…

Pobrania
609
Polubienia
42
Ocena
5
P
Printablesjiggersplat

Drawer Dividers, Trays, Labels and Spool Holders for Ridgid Pro Gear 2.0 System

Trays, dividers and labels to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands. You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some…

Pobrania
605
Polubienia
94
Ocena
5
P
PrintablesSnortimer

Rigid Heddle Backstrap Loom

This is a small, highly portable rigid heddle backstrap loom. Your first project can be a new backstrap, and you can use paracord, USB cable, shoelaces, or whatever you want to stand in until you have your newly woven strap. You'll need a…

Pobrania
526
Polubienia
106
Ocena
4,75
P
PrintablesiListen2Sound

iPhone 14 Pro Max Rigid Case

I needed a phone case before the actual case arrived. I found Leo DIY's TPU case but I didn't have TPU lying around. I realized the dimensions should be similar. I just needed to cut a few notches to let the case flex enough for me to…

Pobrania
522
Polubienia
14
Ocena
2,5
P
PrintablesStephanieS

Ridgid R4520/R4512 Table Saw Fence guide upgrade

Update 2024-4-29: I've uploaded a pair that have minimal supports. I really don't recommend using them, as the models with the built in supports have been fine tuned over dozens of test prints to provide the best printability and most…

Pobrania
506
Polubienia
48
Ocena
4,75
P
PrintablesDuane

Saw (Safety) Key for Rigid, Ryobi, etc.

I lost my power switch key to my Tile/Wet Saw and decided to design one. I printed it at .2mm layer height with extra perimeters for strength. I stopped it at layer 3 for a color change and back to the main color on layer 5 so the text…

Pobrania
498
Polubienia
14
Ocena
5
P
Printablesgminnick

Ridgid Drill-Driver bit holder - UPDATED Version 2

UPADED: 2023-05-07 New support settings that seem to work better. Noted below, in the picture and in the new 3mf file "Ridgid Drill-Driver bit holders-Spt v2.3mf" UPDATED: 2023-04-29 I have reworked the bit holders after someone commented…

Pobrania
481
Polubienia
98
Ocena
4,5
P
PrintablesSteve

AEG/Ridgid Cordless Tool Holders

This is a combination of my own creations and originals so I could store batteries, Tool heads and charger on the ceiling above my bench. They will also work on the wall. Allows for storage with or without batteries attached, spare…

Pobrania
463
Polubienia
49
Ocena
5
P
Printablesbonzai000

Ridgid 2.5" Vacuum Hose Connectors

One of the biggest complaints in the woodworking shopvac world seems to be hoses, connectors and adapters. My dad wanted a set of connectors for his 2.5" setup, and this is the result. Ridgid hoses have stupid sizes. And they don't fit…

Pobrania
451
Polubienia
50
Ocena
5
P
PrintablesRyan McGuire

Rigid Battery Mount

Rigid Battery Mount. Mounts to wall with screws. I printed it with PLA.

Pobrania
448
Polubienia
51
Ocena
4,75
P
PrintablesAJ Quick

Dyson V7/V8 Battery Adapter for Ridgid / AEG Batteries

This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…

Pobrania
447
Polubienia
46
Ocena
0
P
Printablesrockytoptim

Rigid Shop Vac Filter Nut

Rigid shop Vac Filter nut. This is remix from Dragonman57 from Thingiverse.

Pobrania
433
Polubienia
43
Ocena
5
P
PrintablesKarel Pěnička

Rigid Spine

Easily printable cervical vertebrae with discs. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Same 3D model as Flexible Spine ( https://www.printables.com/cs/model/704103-flexible-spine) but intended…

Pobrania
425
Polubienia
57
Ocena
5

RIDGID 18V Drill Holder Upside-down Position

RIDGID 18V Drill Holder Upside-down Position Perfect wall mounted storage for almost any of your 18V RIDGID battery powered drills and drivers. This mount may fit other makes as well. Remixed - Removed excess holes from base plate, added…

Pobrania
421
Polubienia
65
Ocena
0
P
PrintablesCheeseMcGee

Ridgid Jobsite Table Saw Miter Bars 1/4" and 3/8" sizes

I liked the edits on the featherboard done by r00nee, but the miter bars didn't fit in my Ridgid table saw miter slots, so I edited in order for them to fit. While I was at it, I changed the bottom of the bar to hold either 1/4-20 Hex nut…

Pobrania
418
Polubienia
103
Ocena
5
P
Printableskaje

AA to C battery adapter - Type 3 with rigid shell

Some time ago I published an adapter (see remix list) for using AA cells in place of C cells. That adapter works quite well in most cases, but I recently had an application that required a more ridgid shell. This new version takes longer…

Pobrania
410
Polubienia
36
Ocena
4,78
P
PrintablesRoland Kelly

Ridgid R4514 10 Portable table Saw Fence Upgrade

This is a part to replace the small block that the fence uses to clip the guide fence to the saw table. And, greatly improves the repeatability of maintaining square when the fence is moved to a new dimension.

Pobrania
408
Polubienia
29
Ocena
0
P
Printablesdhcpguru

Ridgid Pro Gear 2.0 Tabletop Brackets

I designed some brackets to hold a work bench/plywood on top of my Ridgid pro gear drawers or large tool box. I used washers and some small drywall screws (I will add the size here later). Unfortunately, this version will not lock on top…

Pobrania
406
Polubienia
99
Ocena
5
P
Printablesdan_diaconescu

Samsung A56 / A36 - rigid PETG / PLA Case

The backplate is 2mm thick, so it won't cover the camera bump completely. Did that so it remains a bit flexible. It is kinda tight if you use very rigid materials, might be a bit brittle and hard to take off. # Print recommendations 1.…

Pobrania
394
Polubienia
15
Ocena
4,67
P
PrintablesAjax Bachor

Foxeer Wildfire Adapted case for Digidapter

Modified V3 Shell to properly fit the Foxeer Wildfire Analog Module

Pobrania
386
Polubienia
5
Ocena
0
P
PrintablesDaniel F

DF Loom: A Simple and Flexible Rigid Heddle Loom

The DF Loom is an extremely simple yet versatile version of a rigid heddle loom that can be built DIY-style at minimal cost. It uses 3D-printed parts and aluminum extrusions, which are readily available from local hardware stores. The…

Pobrania
383
Polubienia
146
Ocena
0
P
Printablesoktane

Universal cordless Impact Driver/Drill Bit Holder (Milwaukee, Makita, DeWalt, Bosch, Ryobi, Rigid, Festool)

Universal Impact Driver/Drill Bit Holder A universal cordless Impact Driver/Drill Bit Holder meant Instalation requires: 1 x Brand dependent screw ( check sheet below ) 2 x Neodymium Magnets 20x10x2 mm ( example ) Brand Screw Type Bosch…

Pobrania
382
Polubienia
111
Ocena
4,14
P
PrintablesMcTech DIY

Ridgid Pro Gear Small Parts Box Side Hanger

Wanted to hang my small parts box from the side of my tool box. I have printed, tested and works well. Print 2 of them, there are other options out there, but I wanted something that was simple to print, and to keep the print minimal.…

Pobrania
382
Polubienia
67
Ocena
5
P
Printableskvn5x4

Dewalt DWE6421/DWE6423 to Rigid NXT Shop Vac Adapter

Rigid NXT Shop Vacs already have a rotating coupler on the end with a locking attachment. I designed this to attach the Rigid shop vac to Dewalt DWE6421 and DWE6423 orbital sanders. This adapter has a feature that helps still utilize the…

Pobrania
377
Polubienia
33
Ocena
5
P
Printablescel

Very rigid 2020 Alu-Extrusion Corner Brackets

Rigid Corner Brackets for 2020, 2040,4040 Alu-Extrusions with 6mm V-Slots. 2 different Designs: one for Corners with V-Slots on both Sides and one with V-Slots on one Side only. They are 20mm wide and 50mm long. Easy printable - just…

Pobrania
363
Polubienia
51
Ocena
5
P
Printablesjlennox

Ridgid R4512 Table saw zero clearance throat plate (R4520?)

This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…

Pobrania
360
Polubienia
52
Ocena
0
P
PrintablesEpiales

Build-Your-Own Rigid Heddle for a Loom

I picked up an older model Easy Weaver loom at a second hand shop, but it was missing quite a few pieces. They are generally made out of a wood species such as beech, which is hard to find around here. In addition, other woods hard enough…

Pobrania
356
Polubienia
77
Ocena
0
P
Printableshumming

Bin Cover for Ridgid Pro Gear 22in 1.0

Ridgid, Erbauer, JCB, AEG, Keter, Magnusson modular pro tool boxes ridgid pro gear case bin lid. Not compatible for use in the clear top organizer. Works best if you take the inner lining out of the lid on the 22inch tool box from system…

Pobrania
355
Polubienia
96
Ocena
5
P
Printableshumming

Cord Wrap for Ridgid Pro Gear system 2.0 crate

UPDATE!!! I've added a new version which, when printed in TPU/FLEX material, allows you to pull the cord off without unwrapping it! Print the V3 version in flex, and the crate accessory lock in PETG! Cord Wrap for Ridgid Pro Gear system…

Pobrania
341
Polubienia
76
Ocena
0
P

Dust Deputy Adapters to 2.5", 1.5", & Rigid Vac

Includes: - Outlet Adapter 90 degree elbow to Rigid 2.5” Vacuum hose (16 Gal. 6.5-Peak HP NXT Wet/Dry Shop Vacuum) -Inlet straight adapter to 2.5" dust collection tubing with band clamp -2.5" dust collection tubing to 1.5" vacuum port…

Pobrania
335
Polubienia
44
Ocena
0
P
PrintablesHazardousOmega

Frigidaire Door Shelf Bar Replacement

This is a bar for Frigidaire FFTR1821 door shelf. Ours broke after 2 years so I design a replacement. It's a bit deeper to reduce the stress on the bar when storing oversized jug (in our case soy sauce). Should fit 30" fridge with the…

Pobrania
335
Polubienia
46
Ocena
5
P
PrintablesAlex

Makita 18v to AEG/Ridgid battery adapter

This is an adapter to use Makita 18V batteries in AEG (Ridgid) tools. This adapter uses geniune Makita terminals pad (such as 643852 or 643838). If you don't have it - either purchase it, or print/make it yourself - see…

Pobrania
334
Polubienia
27
Ocena
5
P
PrintablesTechX

ProtoXtruder HGX xtra rigid back

I realy like the design of the ProtoXtruder HGX and just gave it an additional brace on one motor mount. Its almost no added weigth but stiffens the arm a fair bit. Remix of the great work of @nhchiu:…

Pobrania
332
Polubienia
53
Ocena
5
P
Printablesdmrn210

ProtoXtruder 2.0 Skeletonised front and rigid back

I like it when I see the movement of gears and filaments. So, changing the front was just decorative. The back was made tougher, perhaps unnecessarily stiff. I also changed the tolerances for the gears a little bit. This design has been…

Pobrania
330
Polubienia
59
Ocena
5
P
Printableshumming

Ridgid Progear tool box cord wrap

simple cord wrap for the side of ridgid progear system 2.0 tool boxes, medium and large. May work on others as well.

Pobrania
329
Polubienia
64
Ocena
5
P
PrintablesRiese

DJI Osmo Nano Lens Cap – Flexible TPU & Rigid ASA Versions (STL + Fusion 360)

DJI Osmo Nano Lens Cap – Flexible TPU & Rigid ASA Versions (STL + Fusion 360) Description: This is a custom-designed lens protection cap for the DJI Osmo Nano. It’s available in two variants, optimized for different materials: TPU version…

Pobrania
328
Polubienia
27
Ocena
5
P
Printableswillyz99

tool gid holders 90° and straight for bins / trays

uses tool grid screws to mount to the board. printed with 80% infill with pla +

Pobrania
322
Polubienia
66
Ocena
0
P
Printablesarroyobass

Black and Decker Random Orbit Sander to Ridgid Hose Adapter

This is an adapter that will allow you to connect a Black and Decker random orbit sander to a 1-¼ Ridgid shop vac hose. I modeled this to connect to my Black and Decker BDER0600 5 inch random orbit sander, but there's a good chance it…

Pobrania
318
Polubienia
33
Ocena
5
P
PrintablesChrisCow

Ridgid R4514 Table Saw Zero Clearance Insert

For large enough printer, just use the body_full and the two nob parts. For smaller printer, you will have to print the body as two parts and then connect them using 3 copies of the insert. Use glue if you want to make it permanently. For…

Pobrania
308
Polubienia
56
Ocena
5
P
PrintablesHektick101

Pokemon card Semi Rigid and Toploader card holder box tray

Remixed from another card holder to hold Semi Rigid card sleeves & Toploaders I printed a fuzzy outer edge on the top which was a nice effect On Prusa Mini print without skirt or it'll be too big

Pobrania
306
Polubienia
23
Ocena
0
P
PrintablesJinja

Rigid Ink 1kg Spool Holder for Ultimaker 2+

I needed a spool holder for the Rigid Ink 1kg spools as they have a larger hole (54mm) and wider body (74mm). This spool holder will hold a spool with a body up to 76mm. The Innofil/Ultimaker spools do not fit this holder, but it is as…

Pobrania
303
Polubienia
4
Ocena
0
P
PrintablesGuenther

Rigid Case With Pen Slot for the Galaxy Tab S6 Lite

The original hardcase works great, but lacks a place for the stylus (S Pen). I've added a slot for the S Pen. The S Pen clips in best when oriented tip up. I've added the pen slot to both the smooth and textured version on the case. Only…

Pobrania
302
Polubienia
29
Ocena
5
P
PrintablesSteveJohnsen

3-Way 2.5" Vacuum Hose Connector, All Female (Ridgid, etc.)

This simple design has a female end that receives the standard male hose end. I designed it so that there is no need for printed supports, and so that the print flow increases the strength of the printed model. There is also additional…

Pobrania
294
Polubienia
55
Ocena
5
P
PrintablesStarBug_Props

Moff Gideon Mandalorian Helmet

WIP Currently in test print Before anyone asks NO there is no respirator in the chin area... any model with one is wrong. Category: 3D Printing

Pobrania
291
Polubienia
40
Ocena
0
P
PrintablesMrToToRo

Rigid sensor mount for Ender 5 S1

PLA material, 100% infill

Pobrania
285
Polubienia
38
Ocena
0
P
PrintablesChamal Watson

Motorola Moto G53 Rigid Phone Case

Phone case for Moto g53 (2022). Was printed using PLA+ (didn't have any TPU at the time). If you choose to print in TPU just make sure to reduce the scaling in the slicer (doing this might require some trial and error). This is to ‘get…

Pobrania
283
Polubienia
15
Ocena
0
P
Printablesvidision

Magnetic Bit Holder for Ridgid Drill/Driver (Clip On)

This is precisely sized to snap securely on the back of the brushless driver. I recommend using PETG or PLA+ for durability and to avoid cracking due to the tight fit. The basic version will hold bits without magnets or a base. It does…

Pobrania
276
Polubienia
71
Ocena
5
P
Printablesgduck24

RIDGID 2.0 Small Parts Organizer Nesting Cups

RIDGID - 2.0 Pro Gear System 22 in. Compact Tool and Small Parts Organizer Nesting Cups This the smallest of the Ridgid organizers. These trays divide the top half of the cups into 2,4,6 and more sections for organizing while still having…

Pobrania
272
Polubienia
61
Ocena
5
P
Printableshumming

Ridgid Pro Gear Large Tool Box side mounts

Mounts to the sides of the Ridgid pro gear modular large tool box. Presses in nicely for a firm fit or can also be screwed in. Just a basic starting point so that people can remix and design their own accessories for it. At least 2…

Pobrania
270
Polubienia
46
Ocena
0
P
Printablesslvkmkr

DJI digidapter Eachine pro58 cover

What i changed ? antena holes are moved 1mm higher display hole is smaller side button is better protected pre-marked hole for power LED and antenna LED so if you print out of the translucent material, you will see the antenna red and the…

Pobrania
266
Polubienia
8
Ocena
5
P
PrintablesBrian

Ratchet for Kromski Harp Rigid Heddle Loom

The plastic ratchets that came with the original Kromski Harp Rigid Heddle Loom are prone to tooth slip and deformation under load. This design replaces the original pawl and gears with slightly thicker equivalents for better alignment…

Pobrania
266
Polubienia
47
Ocena
0
P
PrintablesBill Hinde

Ridgid Track Saw Square

This is a Track Square I designed to work with the New 18v Ridgid Track Saw (R48630B). You will need to get some ¼-20 T-track bolts; I will link to the ones I used. I also used m3xm6 heated inserts with m3 screws to attach the bottom. And…

Pobrania
265
Polubienia
59
Ocena
5
P
Printableszfactor

The 100 Rigid Gantry

This aims to improve print quality at higher accelerations on The 100 based printers that have larger build volumes. While the printed parts are now actually ~0.7g lighter than the v1.1 gantry according to the slicer, and the M5 bolts…

Pobrania
264
Polubienia
33
Ocena
5
P
Printablesbrewabel

Miter Bar for Ridgid R4512

Have a few jigs and sleds for my table saw and got tired of making them out of wood and having to fine tune them. This fits the miter bar slot in my Ridgid R4512 perfectly. Uses a 1/4x20 nut and can be secured to whatever jig you're…

Pobrania
261
Polubienia
47
Ocena
0
P
PrintablesBrandano

Rigid coupling collet

Couples two shafts rigidly by using a double headed collet with threaded nuts tightening both ends. Pretty simple, printed at 0.2mm height in PETg, 0.4mm nozzle, 25% infill. Had to add a 3mm brim on the collet to improve bed adhesion. The…

Pobrania
261
Polubienia
20
Ocena
0
P
Printablesx3Design

Rigid Hinge (M5 bolt)

Another Rigid Hinge (heavy duty) for M5 bolts. Print in place as one piece. Works great in PLA and PETG. On PLA slightly smoother operation. Layer 0.2mm. x3 all perimeters, up & down. For dimensions advise file “Hinge_dimensions.pdf”

Pobrania
256
Polubienia
28
Ocena
5
P
PrintablesTobi

Voron V2.4 Rigid fixed Z Joint

mayby some like them ;) BOM 16x M3x20 4x M3x16 4x M5x30

Pobrania
256
Polubienia
34
Ocena
5