Wyniki wyszukiwania: gx

Sortowanie

982 modeli

MK3S+ LGX Shortcut Compatible X-Axis Upgrade with Tensioner (Bear-Derived)

Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…

Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
250
Polubienia
53
Ocena
5
P
PrintablesDanielAlex

Star Wars GX1 Short Hauler

This is a 1:270 model of a GX1 Short Hauler. The wings on either side are print-in-place and can rotate up and down. The model is 138.1mm long, 66.4mm wide and 39.2mm tall. It has a hole compatible with a big pin and base from here .…

Wydruk około 4,67 €–5,70 € nettoWstępna wycena jednego wariantu

Pobrania
218
Polubienia
26
Ocena
0
P
PrintablesFuseFusion

Pull Start Handle/Griff Seilzugstarter Honda GX

Mir fehlte einen Griff für meinen Honda GX270 Motor. Ich habe von meinem Ersatzmotor den griff nachmodelliert und für das Drucken angepasst. Gedruckt wurde aus ASA, liegend und mit 4 Randschichten. Support wird benötigt, kann allerdings…

Wydruk około 2,74 €–3,34 € nettoWstępna wycena jednego wariantu

Pobrania
143
Polubienia
26
Ocena
0
P
Printablesrahix

GX12 Aviation Connector Dust Cap

About This is a dust cap to protect GX12 “aviation connectors” when not connected. This variant is designed for plugs and flange-mount plugs. There is a 13mm hex and a slot for removing the dust cap with appropriate tools. Additional…

Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
104
Polubienia
12
Ocena
5
P
Printablesbirdybro

Shure PGXD4 and MOTU M2 Under Desk Mountable Mini Rack

Pieterv24's MOTU M-Series Under Desk Mount but with a second slot for a Shure PGXD4 Wireless Microphone Receiver system. It should fit fine with the model that we purchased this year, no guarantees if Shure makes a revision to the body at…

Wydruk około 15,02 €–18,35 € nettoWstępna wycena jednego wariantu

Pobrania
42
Polubienia
6
Ocena
0
P
Printableshumebeam

Icarus 2 - QIDI X-Max / X-Plus / I-Mate / X-Maker Carriage (Orbiter, Sherpa Mini, LGX Lite)

Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…

Pobrania
2498
Polubienia
226
Ocena
5
P
PrintablesSIVIS

LGX lite Extruder FDM case

I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…

Pobrania
2231
Polubienia
338
Ocena
4,64
P
Printablesgareth.ky

Stealthburner / LGX Lite / EBB 2209 & 2240 - Remix

The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…

Pobrania
1159
Polubienia
134
Ocena
4,5
P
PrintablesDWO

Voron Stealthburner - Ender 3 - LGX Lite - 4020 Fan - BLTouch

This is a modification to the original ender 3 (not v2) to allow for it to mount the Stealthburner fan shroud created by the Voron team. It also comes with a small adapter to be able to mount an LGX Lite as its extruder. With how the…

Pobrania
935
Polubienia
171
Ocena
5
P
Printablesmmuellerphoto

BTT EBB42 Mount - Eva 3.x - Orbiter 2.x & LGX Lite & Sherpa Mini

This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…

Pobrania
906
Polubienia
109
Ocena
5
P
Printablesmajek

HGX Lite 2.0 (oblique tooth) extruder mock-up model

This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths). Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position.…

Pobrania
831
Polubienia
35
Ocena
5
P
PrintablesEmbrace Making

CR-10 Smart and CR6-SE Direct Drive Upgrade to Bondtech LGX Lite

In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…

Pobrania
803
Polubienia
62
Ocena
5
P
PrintablesBrooks

HGX Lite Extruder Shell with 16mm Shaft

I wanted to use LGX Lite Extruder FDM case model by SIVIS, but I couldn't sand down the shaft. Therefore, I made a hole to allow the latch to move freely. rotation_distance 53.494165 gear_ratio 44:10, 37:17 Re-calibrate your own value for…

Pobrania
798
Polubienia
126
Ocena
5
P
Printablesxavierly

AGx Button Cell Battery Holders (Gridfinity, Stackable, Labelled)

Please refer to the main entry for complete descriptions and credits. The list of AGx holders were split out from the main entry to facilitate search and download. The holders here are labelled with AGx. If you prefer holders with LRxx…

Pobrania
758
Polubienia
110
Ocena
4,91
P
PrintablesEmbrace Making

Creality Ender 7 Direct Drive LGX Lite and Mosquito Magnum

In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…

Pobrania
737
Polubienia
50
Ocena
5
P
PrintablesPierre

Voron 2.4 - Stealthburner with 3DO nozzle cam & LGX lite & BTT SB2209 & umbilical mod

Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…

Pobrania
654
Polubienia
103
Ocena
5
P
PrintablesMLoeko

Voron Stealthburner LGX Lite Mellow SB2040

As there were no available mods to fit sb2040 with lgx lite I modified the standard stealthburner body and LGX Lite mount to fit together. Inspired by standard Stealthburner https://github.com/VoronDesign/Voron-Stealthburner and lgx lite…

Pobrania
624
Polubienia
85
Ocena
4,67
P
PrintablesFractal

BTT EBB42 Toolboard BondTech LGX Lightweight Direct Mount

Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…

Pobrania
584
Polubienia
67
Ocena
4,67
P
PrintablesMonsieur Luke

GX16 connector screw-cap

Mainly used as a replacement for a missing cap on the GX16 connector on my electric scooter. You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight. Print…

Pobrania
568
Polubienia
21
Ocena
5
P
PrintablesKyle Bernard

LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)

I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…

Pobrania
560
Polubienia
72
Ocena
4,88
P
PrintablesDruckzeug

Stealthburner HGX Lite mount

Die einfachste Methode einen HGX Extruder mit einem Stealthburner zu verheiraten. Der Adapter von djos_1475 ist sehr simpler Adapter um einen Orbiter Extruder mit einem Stealthburner zu betreiben. Der HGX (billigkopie eines LGX) hat…

Pobrania
552
Polubienia
53
Ocena
5
P
PrintablesBrynD

Make-It-Fit Creality K1 LGX Extruder Housing for Bondtech LGX Lite Internals. Threaded Insert version.

Update: 09.06.24. Installation guide added. Update: Also see my new Libra & Trigger Extruders that uses Orbiter internals. By popular request, new threaded insert mounting version. Also see original version here:…

Pobrania
548
Polubienia
127
Ocena
5
P
PrintablesMaitreLancelot

RGX11 melee Valorant

''RGX11 melee Valorant'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot

Pobrania
525
Polubienia
65
Ocena
0
P
Printablesjmillerfo

Voron 2.4 LGX Lite Extruder Mod

Overview: This Voron modification to the Stealthburner option supports the Bondtech LGX Lite extruder, ERCF Filament Sensor, and the Hartk 2 Piece Toolhead PCB. I purchased the Bondtech LGX Lite extruder hoping that it would provide a…

Pobrania
511
Polubienia
53
Ocena
0
P
PrintablesDavid

rgx katana

katana rgx de valorant

Pobrania
505
Polubienia
64
Ocena
0
P
Printables6d6178

Toolhead Spacer for Voron V0.1 with LGX Lite and Umbilical PCB

This is a toolhead spacer with strain relief for the Voron V0.1 that makes the Bondtech LGX Lite extruder mod work together with the Umbilical PCB mod by timmit99 . BOM Qty Description Sourcing 4 M3x6 BHCS Aliexpress 2 M3x30 BHCS…

Pobrania
502
Polubienia
63
Ocena
5
P
PrintablesAccess

Modular SlingXBow Family

CC BY-NC-SA license: https://creativecommons.org/licenses/by-nc-sa/4.0/ These designs, and devices built from such, are experimental. While some minimal testing has been performed, they are provided as-is with no guarantees whatsoever.…

Pobrania
500
Polubienia
119
Ocena
5
P

Nvidia DGX Spark

1:1 Model of the Nvidia DGX Spark, using this for making stands for stacking the spark. Wasn't able to get the cheese grader texture on the front, but it is flat with the sides, so take that into consideration if using this for a…

Pobrania
480
Polubienia
16
Ocena
5
P
PrintablesFerelArg

Victron Lynx case for Cerbo GX

Inspired on Victron Lynx - Rpi + 5" Touchscreen enclosure by RobrechtDR. But I had a lot of problems importing the STL into Sketchup, so I started again with the original Victron files.

Pobrania
470
Polubienia
43
Ocena
5
P
Printablestommorox234

LGX lite stealthburner filament cutter

this is a mash up between a few different lgx lite mounts as well as the filametrix toolhead knife to allow for cutting of filament rather than tuning tips. i realised i would need this when tuning pla tips on a high flow hotend like the…

Pobrania
460
Polubienia
92
Ocena
5
P
PrintablesfbeauKmi

PUG holder for CW2 / LGX Lite

Nice feature No need to disassemble the wire harness to install this gland. Bill of Materials Category Qty Description Notes Hardware 3 M3 heat insert Voron BOM Hardware 2 M3x10 SHCS

Pobrania
434
Polubienia
40
Ocena
5
P
PrintablesMicah

Gatorade GX Bottle Clip

Replacement clip for a Gatorade GX water bottle. Prints quickly and with no supports.

Pobrania
427
Polubienia
18
Ocena
4
P
PrintablesSIVIS

LGX lite Extruder MJF case

I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…

Pobrania
422
Polubienia
78
Ocena
5
P
PrintablesTijmenbo

Voron Dragon Burner hgxlite mount with filament sensor

I'm working on a stealtchanger and wanted to intergrate a filamentsensor in the toolhead, additionally you will need a 5,5mm steel ball, 2x m3x35mm bolts and a D2F-L microswitch

Pobrania
421
Polubienia
73
Ocena
5
P
PrintablesHenry Thomas

2 x Node Nvidia DGX Spark (GB10)Cluster Side Vent Cooling Duct

This is a cooling housing for DGX Spark and related AB10 AI supercomputers. It extracts air from the rear vent while maintaining access to ports. It fits in a 3U rack space, takes a 120 x 120 x 25 mm fan, and has rails for a 140 x 140 mm…

Pobrania
404
Polubienia
18
Ocena
0
P
PrintablesMilli

EVA 3 HGX LITE drive mount

Mount for HGX extruder with 43.5mm mount holes spacing

Pobrania
388
Polubienia
51
Ocena
5
P
PrintablesSurfalex2000

GX591 Spot welder CASE for 18650 Lithium Cells

Case and spot welder holder. The cover has button extensions included.

Pobrania
381
Polubienia
55
Ocena
4
P
Printablesxp1ratex

Umbilical for EBB42 with LGX on Voron stealthburner

Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…

Pobrania
377
Polubienia
53
Ocena
5
P
PrintablesMortalWombat

Taurus GX series speedloader

Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.

Pobrania
376
Polubienia
14
Ocena
0
P
PrintablesMC

Voron 0.2 mini stealthburner remix for LGX light extruder

Voron 0.2 mini stealthburner cowling for LGX light extruder there are files for the standard strain reliever and for the tool head pcb

Pobrania
375
Polubienia
45
Ocena
5
P
PrintablesHenry Thomas

2 x Node Nvidia DGX Spark (GB10) Cluster Cooling Duct

This is a functional 2 Node Cluster cooling duct for GB10 AI super-computers like the Nvidia DGX Spark, ASUS Ascent GX10, Dell Pro Max, Gigabyte AI TOP Atom, HP ZGX Nano, MSI EdgeXpert, and ThinkStation PGX. It fits in a 3U rack space,…

Pobrania
369
Polubienia
23
Ocena
5
P
PrintablesBrynD

Make-It-Fit Creality K1 LGX Extruder Housing for Bondtech LGX Lite Internals.

Update: Also see my new Libra & Trigger Extruders that use Orbiter internals. There is now a threaded insert mount version in addition to this one, see link:…

Pobrania
364
Polubienia
87
Ocena
5
P
PrintablesUmer Nawaz

Jetson Orin AGX Mount

Simple mount for the orin to attach to any other objects. Will require longer bolts than those removed from base. There is no reason StereoLabs should sell a mount for 300$.

Pobrania
362
Polubienia
5
Ocena
0
P
PrintablesBrynD

Thunder 7, Ender 7 Toolhead (Ender7, LGX Lite, Bambu Lab hotend, CR touch)

Original Bambulab hotend & CR touch z probe version. There is also BIQU Microprobe & E3D Revo CR remix versions now. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic…

Pobrania
359
Polubienia
45
Ocena
5
P
Printablesjphalip

Stealthburner mod for CPAP, LGX Lite and SB2040

This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…

Pobrania
355
Polubienia
74
Ocena
0
P
PrintablesSzwalkiewicz

Bondtech Lgx Lite

This is a solid Model of the Lgx lite extruder. The model comes from the bondtech's websight but I converted the file from .step to .obj to save others some time if they want to to a quick & dirty mock-up for there printer Category: 3D…

Pobrania
336
Polubienia
20
Ocena
5
P
PrintablesMaverick Ng

Voron 2.4r2/Switchwire EBB36 CanBus LGX lite for cable chain remix

Mixing using EBB36 and LGX lite with cable chain hook.

Pobrania
333
Polubienia
34
Ocena
4
P
PrintablesKepleRPL

Back enclosure for Stealthburner with LGX Lite, EBB36 and PG7 umbilical

A mod focused on fitting all hardware of LGX Lite extruder, BTT EBB36 (V1.2) board and umbilical PG7 mount in one fully enclosed and ventilated case. Used parts of toolhead from: - Eytecz's LGX Lite mount - Voron's repo including…

Pobrania
333
Polubienia
45
Ocena
4
P
PrintablesDylan Thurston

Clockwork2 Large Gear HGX - ECAS - ERCF Filament Sensor - Filametrix

1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…

Pobrania
333
Polubienia
39
Ocena
1
P
PrintablesTechX

ProtoXtruder HGX xtra rigid back

I realy like the design of the ProtoXtruder HGX and just gave it an additional brace on one motor mount. Its almost no added weigth but stiffens the arm a fair bit. Remix of the great work of @nhchiu:…

Pobrania
333
Polubienia
53
Ocena
5

HGX Lite Mount Ender 3 v2

I have designed this because i wanted to upgrade my ender 3 v2 to direct drive extruder and i saw the HGX Lite extruder for 25€ in Aliexpress but I didn't found any stl to mount it....so i I designed this...with and without BLTouch. I…

Pobrania
333
Polubienia
27
Ocena
0
P
PrintablesMaverick Ng

Voron Stealthburner LGX lite ERCF EBB36 v1.1 or 1.0 cover

A mod for Voron Stealthburner LGX lite ERCF EBB cover. For those user that using BTT EBB36 v1.1 or v1.0 CanBUS board. Hardware BOM: Qty: 2, M3x30

Pobrania
326
Polubienia
32
Ocena
0
P
PrintablesMaarten Vlug

FLSUN V400 E3D Revo Micro (High Flow) + Bondtech LGX Lite extruder conversion

As I really loved the E3D Revo hotend on my Ender and they recently came with a High Flow version, I decided to make a conversion kit for the V400. I admit, it is not cheap and it does not print much better than a Volcano, but it is very…

Pobrania
321
Polubienia
34
Ocena
5
P
Printables3Dthat

Filament Cutter for LGX Lite and Sherpa Mini

This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it. If you are using the LGX Lite mount…

Pobrania
321
Polubienia
100
Ocena
5
P
Printables6d6178

EVA 3 EBB36 Mount for LGX Lite Extruder

This is a mount with strain relief to use the Bigtreetech EBB36 toolhead PCB with an LGX Lite extruder on an EVA 3.x carriage platform . This is a remix of the mount for the Orbiter 2.0 extruder by Iatraliptes . I recommend using a USB…

Pobrania
319
Polubienia
33
Ocena
5
P
PrintablesBubblez
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
316
Polubienia
25
Ocena
5
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Pobrania
312
Polubienia
36
Ocena
0
P
PrintablesJoseph

Stealthburner HGX MOD

This is Stealthburner with HGX extrude gear MOD.

Pobrania
305
Polubienia
57
Ocena
5
P
PrintablesLia

Funwheel Charge plug protector GX16 (threaded)

Updated CAD below. A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with an m16x1 thread to secure it on the port. Tested on a Bambu Labs P1S at 0.08mm layer height for maximum qualityyyyyy. If you…

Pobrania
299
Polubienia
14
Ocena
5
P
Printableskaragoal

Mellow SB2040 LGX Lite PCB Mount

The original mount did not work for me so I designed this one which works great on mine. The original mod is here: https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 Needs to be printed with supports.

Pobrania
296
Polubienia
28
Ocena
0
P
PrintablesPrimeRetroGamer

OGX-Mini / LGFF Wheel Adapter Pico Case

Modified OGX-Mini Case to fit Raspberry Pi Pico instead of a RP2040-Zero. Good for both of projects: https://github.com/wiredopposite/OGX-Mini https://github.com/sonik-br/lgff_wheel_adapter USB A port:…

Pobrania
288
Polubienia
10
Ocena
0
P
PrintablesBen

Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links

High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…

Pobrania
283
Polubienia
25
Ocena
0
P
PrintablesGreatOldOne

Nema 17 / GX12 Socket End Caps

4 endcaps for Nema 17 sized stepper motors, allowing the use of GX12 (12mm diameter) locking circular multi pin connectors. More robust than the usual 6 pin JST connector or straight wires coming from the coils, both of which are prone to…

Pobrania
282
Polubienia
46
Ocena
5
P
PrintablesJwidess

GX470 Backup Camera Mount - Lexus 2006

Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…

Pobrania
279
Polubienia
24
Ocena
5
P
Printablesonodono

Ender 3 V2 - HGX Lite Extruder - TZ E3 Hotend - Satsana - 5015 - BL Touch

This is my current setup for my Ender 3 V2. It has: TZ E3 hotend HGX Lite extruder Satana shroud 5015 fan BL touch I designed the Extruder mount/adapter plate and modified the Satsana to fit the TZ hotend Category: 3D Printer Extruders

Pobrania
276
Polubienia
44
Ocena
5
P
PrintablesDaniel Hastings

Stealthburner LGX lite mount for SB2209, filament sensor and filametrix.

use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main

Pobrania
274
Polubienia
33
Ocena
0
P
PrintablesEcu3D

Voron SB + LGX Lite + Knomi V2 + SB2209

Please, print them in ABS, 4 walls and 40% infill. You don't need to change the orientation of the parts.

Pobrania
273
Polubienia
25
Ocena
5
P

HGX Light and ORBITER extruder and v6 hotend for ender 3 ( BL-touch )

Used bear upgrade files for prusa i3,edited it to fit on ender 3 x axis plate and added mount for HGX light and ORBITER 2.0 extruder. All printed with 0.2 layer hight. use ABS or PET-g Nuts and bolts needed: 3 x m3 square nut (2 extruder…

Pobrania
273
Polubienia
41
Ocena
5
P
PrintablesTD1 3D

Voron Mellow FLY-SHT42 Holder LGX/Nema17 Canbus Cable holder

FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…

Pobrania
269
Polubienia
36
Ocena
5
P
Printables3dBearnicorn

CR10/Ender3 StealthBurner LGX Mount w/ BL Touch and PINDA

I needed a way to mount the Stealthburner with an original Bondtech LGX to my CR10 S5. I found this Afterburner adapter on thingiverse and remixed it to fit my needs ( https://www.thingiverse.com/thing:4638150 ). The LGX adapter came from…

Pobrania
268
Polubienia
66
Ocena
0
P
PrintablesVC Design

Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch)

Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch) Description: Upgrade your Ender 3 V2 with this versatile direct drive bracket. Compatible with Sherpa Mini, HGX…

Pobrania
268
Polubienia
45
Ocena
0
P
PrintablesSputnikOC3D

LGX Lite & WWG2 - Mello Fly SHT-36 Max V3 / EBB36 Style Toolboard Mount - Voron Stealthchanger

Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…

Pobrania
265
Polubienia
28
Ocena
0
P
Printablesbullitt168

Stealthburner LGX lite Mount with SB2209 (RB2040), Filament Sensor + Filametrix

I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…

Pobrania
263
Polubienia
38
Ocena
0
P
PrintablesChris Taylor

Ebb42 eva 3 mount for bondtech lgx extruder

This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…

Pobrania
259
Polubienia
20
Ocena
5
P
Printablesrene hellemons

Bondtech LGX Lite Adapter Flsun V400

i want to have the Bondtech LGX Lite on my V400, so a did a design and make it on my V400 now already is on my Printer and works great i am share it to other people who want the Bondtech LGX Lite on his or hers V400 Printer they are free…

Pobrania
258
Polubienia
45
Ocena
5
P
PrintablesDan Marchenkov

Nvidia DGX Spark - 10in rack mount

Print standing on the face plate. Printed with ABS, but I assume PETG should be fine as well Attach the backing plate using 2mm self tapping screws .

Pobrania
256
Polubienia
18
Ocena
0
P
Printablesboothyboothy

BTT Knomi Display V1 & V2 for LGX Lite Extruder

Update: 13\10\24 I have uploaded a Knomi V2 version. The V2 version is the same for both Generic & EVA3 mounts. 1. Due to the increased diameter of the V2 mount I have modified the EVA3 LGX Lite mount very slightly to accommodate. This…

Pobrania
254
Polubienia
35
Ocena
0
P
PrintablesPaul Trautner

Hgx twirl gear CW2 Extruder for Stealth burner

Updated the design to work with the “twirl” version of the HGX gears. Support is needed for the pocket that the motor sits in. Print quality is on par with Galileo 2 or better Twirl gear:…

Pobrania
250
Polubienia
21
Ocena
0
P
PrintablesM.Kayed

MAK Vector Duct - LGX Lite V6 Volcano Creality/Ender 3 Mount

The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…

Pobrania
246
Polubienia
42
Ocena
5
P
PrintablesMonsieur Luke

GX12 connector screw-cap

You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight.

Pobrania
243
Polubienia
10
Ocena
0
P
PrintablesMcGybeer

Kobra Max Direct Drive Mod (Bondtech LGX Lite)

Direct drive mod for the Anycubic Kobra Max using the Bondtech LGX Lite extruder (https://www.bondtech.se/product/lgx-lite-large-gears-extruder/). This mod aims to be as simple as possible, keeping the original hotend case and the…

Pobrania
239
Polubienia
61
Ocena
5
P
PrintablesMax Luck

LGX Lite - Filament Entry Sensor

Simple Sensor that allows you to detect filament entering the LGX-lite extruder. Useful when you are using a tool changer (Specifically the ERCF/ERCFv2 to detect the distance from the changer to the extruder. It is also extremely useful…

Pobrania
239
Polubienia
38
Ocena
4,5

HGX Lite 2.0 Stealthburner extruder adapter

Printed with standard voron settings: 5 upper and lower layers, 4 walls, 50% gyroid infill.

Pobrania
237
Polubienia
28
Ocena
0

Mellow SHT-36 v3 - LGX Lite mount

Mount for Mellow SHT-36 v3 on Bondtech LGX lite

Pobrania
235
Polubienia
19
Ocena
5
P
Printablesyammit85

Victron GX Touch 70 Aufputz Adapter

Aufputzadapter für Victron GX Touch 70 Display, damit das Display direkt an eine Wand montiert werden kann, inkl. Auslass für das Kabel unten. Mit Fusion 360 erstellt, bei Bedarf kann die Datei verändert werden, damit z.B. das Kabel an…

Pobrania
233
Polubienia
21
Ocena
0
P
PrintablesMichael Whitley

EBB 36 Mount for LGX Lite

Mounts a EBB36 toolboard to the back of a LGX Lite extruder. Use 18mm standoffs to position the mount directly behind the LGX Lite motor. When paired with 18mm standoffs, the mount will not touch the LGX Lite motor. Note: this mount does…

Pobrania
231
Polubienia
27
Ocena
0
P
PrintablesWissencat

Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile

Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile Parts Needed: M12x1,5 Strain Relief 2x M3x25 4x M3x30 2x M3 Inserts Location:

Pobrania
231
Polubienia
35
Ocena
0
P
PrintablesPeter Farell

Vase - Kangxi period (1662-1722)

Vase - Kangxi period (1662-1722) Fixed lack of bottom -and lack of hole at top. Mangled mesh from p-gam. hollowed. Added UV details.

Pobrania
222
Polubienia
56
Ocena
5
P
PrintablesH3DA Components

Mount with USB strain relief for EBB36 CAN V1.2 and HGX Lite extruder and similares

Description Even high-quality USB-C cables can experience issues when the toolhead moves rapidly across the print area. The sudden movements and forces can create tension on the cable, potentially leading to intermittent disconnections or…

Pobrania
222
Polubienia
28
Ocena
5
P
PrintablesDynaMight1124

OGX-Mini Case

Heres an OGX-Mini case I designed. You'll need a RP2040-Zero and a Female USB Type A Breakout board. I have included a picture of the one I used, I assume its a fairly common one! The main Github for the software is here:…

Pobrania
220
Polubienia
22
Ocena
5
P

Nvidia DGX Spark On Desk Stack Stand

Portable DGX Spark stand for stacking 2. Reversible direction with airflow.

Pobrania
219
Polubienia
11
Ocena
0

Lexus GX 460 Cupholder Insert

Wife uses a 40oz Stanley cup that is very top heavy and moves around way too much in the car. The stock GX cupholder is an ellipse shape that relies on 3 spring loaded detents to keep drinks stable. Those detents work well for light…

Pobrania
218
Polubienia
17
Ocena
5
P
Printableschrisseebee

Ender 3 Pro/V2 NEO LGX Lite Mount

Update 6/30/23. Added an experimental and untested version meant to be compatible with the Ender 3 V2 Neo. The holes relating to the extruder motor are moved 21mm to the side. Let me know if it works! Update 7/7/22. Added a beefier mount…

Pobrania
215
Polubienia
27
Ocena
4,75
P
PrintablesRoed

Voron Stealthburner with LGX Lite - Door and mount for BTT EBB36

I recently switched to an LGX Lite extruder on my Voron. Since i use an EBB36 v1.2 i've remixed the door and mount for the EBB36 to have i fit nice and sit tightly on the SB. This way you can still use the door, have everything tucked…

Pobrania
215
Polubienia
33
Ocena
0
P
PrintablessdJustin

Voron Stealthburner LGX Lite + EBB_22xx + Knomi

This lets you run a Voron Stealthburner + a Bondtech LGX Lite + a KNOMI + and EBB 2209/2240 I have it up and running on my printer so it's tested, sample size 1.

Pobrania
212
Polubienia
24
Ocena
0
P
Printablesdanio_298

SB2209 Large Gear Clockwork2 HGX (and FilamATrix alpha version)

A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…

Pobrania
210
Polubienia
27
Ocena
4,5
P
Printablesxp1ratex

LGX adapter for VORON MGN12 X-carrige

Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament. Removed the e3d fastener in the bottom, removed the old AB ducts,…

Pobrania
208
Polubienia
23
Ocena
0
P
PrintablesPapek

LUMIX GX80 / GX85 camera cage (work in progress)

Camera cage for the Lumix GX80 / GX85 camera. I designed the cage because the cages for GX80, which is still a good camera, are no longer available on the market. The cage contains a number of 1/4" and 3/8" UNC camera threads, known as…

Pobrania
207
Polubienia
40
Ocena
5
P

Bondtech LGX Shortcut Mosquito Fan Duct for Prusa MK3S/+

This STL was supplied to me by Bondtech since it is not available on the site, and the Bondtech SHORTCUT mosquitoExtruder/hotend Accessory Pack has not been available in the US for some reason. Also, the fan shroud is not sold separately…

Pobrania
207
Polubienia
28
Ocena
5