79 modeli
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too. You will have to use a bit of velcro tape and source your own pad. Recommend…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Pico 4 is better in almost anyway than the Quest, it is lighter, better balanced, and has a higher FOV out of the box than I have been able to get with any facial interface for the Quest. The only thing the Quest does better is…
First and foremost: Thanks @ David Kingsman for providing us with such a neat clock model! Myself and everyone else I showed it to really liked this fresh design! Sadly I ran into multiple clearance issues while assembling the parts…
Big thanks and compliments to the original designer! @StoererHauptquartier On my printer the Rotor fused and locked in place. Seems a pretty common issue. This remix opens the clearance by 50%. I printed this on MK4S 0.40 nozzle and 0.10…
Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…
I had a slight issue printing the original one as the threading would not fit my strain relief so I quickly increased the tolerances and now the PG7 fits well.
Edited cover for the SV06 ACE. The cover is opened up and makes the stock fan a little quieter. I printed in PLA black with 0.4mm nozzle and supports. This is a rework of the original SOVOL SV06 ACE model from SOVOL's github.
I took a liking to this wheel case, and decided I'd correct the primary complaint other people had - the thin walls affecting printability. Print settings are the same as Jacob's original project, I would perhaps suggest using PCTG, as…
Keep Your Filament Tidy – Now Stronger Than Ever (V3) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 3 , featuring thicker walls for enhanced…
This is an improved FOV gasket for the Pico. It significantly enhances your field of view and comfort. I found it superior to both the AMVR and GeekVR versions. While it's based on another design, the original model is arguably the best…
Remix of a good cable clamp but for people with slightly larger hands and need an easier time clipping the item together with one hand. Prints in two parts, snap-fit as easy as the original. Resize as needed.
You need: Cable_Link_K1_9x15_v14_increased_3mm.stl or Cable_Link_K1_9x15_v14_increased_3mm_increased_pin_0.5.stl - x22 K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm.stl or…
I kept having issues with the IR Sensor calibration on the MMU2S after the MK3S+ upgrade. To get the sensor to read 1, the holder/chimney had to be pushed all the way to the right and then some. The reading kept fluctuating between 0 and…
The original Split Flap design is a masterpiece of design and engineering. However, I couldn't get my 2x1mm magnet to fit within the inner drum without breaking things. I've increased the bore of the magnet hole to 2.4mm which should be…
I just edited the very good mod by John Doe to accomodate bigger 6x3 magnets (superglue suggested)
I don't like the angle of normal mounts when riding a motorcycle/ATV because the camera points too far down and usually only shows the speedometer, which is why I built this one. I printed all of them with PLA, 4+ walls, >30% infill and…
Love the original model https://www.printables.com/model/325995-foldable-ruler-credit-card-size but had trouble printing. The original has 0.2 clearance for the hinge which has worked well for some, but my slicer was trying to print the…
I printed Yaron's belt tensioner but found that the bottom of the belt was rubbing on the lever. I remodelled this part and moved the yoke of the lever closer to the adjusting screw and added a chamfer to the top edge. All other…
This let me print this model with a 0.4 nozzle and rotate the center gyroid. If you are still having trouble, try increasing the Z offset, and/or printing with “Slicing Tolerance” set to “Exclusive.” Model edited in Blender. Sliced in…
I could never get screws to print right. the threads never fit, or the tolerances were off, so while printing the Tablet and Notebook Stand from @Virus4711 I decided to make my own. Printed on a MK4 with a little extra tolerance for other…
Changed the text for each file, one says Router Bits and the other says CNC Tooling I did this because I printed two boxes, one for my table router and the other for my wood CNC
A custom Y Axis motor mount to fix rattling when motor touches back frame. This is a remix, but i forgot where i get original model.
Isolated the four individual traces for each of the four sides plus a center to slot them into. This makes it possible to print much larger (220% size on the Prusa Mini). I also added a center with a fake processor. Numbering is…
just a small remix of the original file provided by iflight, just made the walls a bit wider.
Update 18 Apr 2022: The Y-axis mod suffered significant deformation probably due to heat from its close proximity to the heated bed even with insulation. Suggest to have this printed only in ABS at this point of time. Update 7 Apr 2022:…
Very basic mod to increase airflow, print in petg to be strong enough
If you own a DJI Mavic Mini (1), you might notice a wobbling of the front arms in cold conditions or with strong winds, which can even cause the props to hit the body and crash. This is caused by the low torsion strength of the original…
For a more stable lid closure I increased the thickness
This is a work-in-progress ! This is a remix of the base wall tile from RostaP's Honeycomb Wall Storage system: https://www.printables.com/model/152592-honeycomb-storage-wall The original model was easy enough to print, but had too tight…
This model is a stronger idler arm for the ProtoXtruder 2.0, with a 1 mm increased gap between the idler and the extruder body! This solves two problems that I have with the original idler arm: The arm warps when heated in a heated…
I reverse-engineered the original model and increased the number of holes.
This is a remix of the awesome phone tripod by LoboCNC. I have added two variations of longer tripod posts. - The 148mm post is 40mm longer than the original. - The 198mm post is 90mm longer than the original (intended for holding the…
To mount David Ds multiboard adaptation for the Prusa Enclosure on only parts of a side the snap fit STEP file provided by David D was remixed to allow increased adjustability. To be of any use you will need parts from the Multiboard for…
I printed the windmill larger but it needed to be more offset in order to not hit the nozzle fan. Used superglue to get the 8x3mm neodymium magnet attached.
Increased tolerances for a looser fit.
cover low beam nissan almera classic b10 increased volume
The original version was a fraction to tight on both Lelit's and Rancilio's portafilter's so I increased the inner diam. Not tested yet. new version added today 23.05.2023. I had previously exported the file in meters and not in mm. Now…
This is a remix of jpotegal's spool holder. https://www.thingiverse.com/thing:2249488 Main differences are: The spool holder has been raised around 25mm to provide more clearance for large spools. I needed this to avoid contact with my…
I got the Powerhobby twin fan heat sink for my Mojave and immediately noticed some things about it I didn't like. The fans don't have enough "breathing room" as in the heat sink fins are very shallow and don't allow for much air flow at…
DISCLAIMER: this is all custom made for my printer and I doubt it would easily fit others' printers and needs. I'm sharing these files in case someone finds them useful, not for directly doing the same modifications as I did, but this may…
Increased space to fit all tokens provided. Original fit one fewer or each token then came with the game.
I used Fusion 360 to remodel the shaft and crank from the original model such that I can adjust the gear ration. I did not know the gear settings used in the original model so I set my own. The files provided are drop in replacements for…
Hi, I have been printing since September 2023 and am starting to make original designs and also remix other designs with attribution. I hope these can help someone out as many of the designs on Printables have helped me. Here are five and…
Print with the slit faced down with supports. This fits all allen keys that come with the Ender 2 Pro.
This is a modified end of a Williams upkicker solenoid. The design is deeper than the original, which means the ball settles in faster and hopefully avoid situations where the ball is still moving when the game fires the upkicker, often…
Now that the Core One can use MMU3, it needs more space in the buffer because of the increased size of the PTFE tube. So, to maximize the space in the buffer and minimize issues (filament pushback), i remixed the segmenter by adding 1cm…
Increased internal width for larger multimeters to 87.5
I was unable to find a D25mm / 3.5 mm rubber O-ring in local store, so I bought a D25 / 4.5mm O-ring. It But appeared that it is impossible to attach the spool holder to a puck with that O-ring, so I decided to create a mod with a bigger…
I was previously only able to get a maximum of around 310mm Z-travel out of my Voron 350 because the cable chain hit the frame at the top of the printer. This annoyed me and was an issue for some of the larger parts I print, so I moved…
Supports on build plate only. Printed in PLA following original creator's suggested print settings.
I designed an X-axis reinforcement for my CNC machine, 3D printed in PETG. The L-shaped structure enhances rigidity and stability, reducing unwanted vibrations during operation. Mounted with M6 screws, it ensures a solid connection to the…
Stackable Storage Bins by Project34 Increased the bin size to 180x300
The swappable front panels on the Maingear MG1 add a unique touch of personalization to each of these prebuilt PCs, but they also restrict airflow. In normal situations, this rarely has an impact on performance. However, to get the most…
Added an actually whiteboard, it will need ironing to make smooth. Also increased the diemensions of the middle arm
Since the original design did not support fat shafts (like 23/64) I changed the holes diameters from 9mm to 10.5mm.
This is a simple remix of Tennis racket wall mount v2 by Félix It increases the tolerance of the wall mount part so that it can be more easily inserted in the hanger part. However, it still does have some friction so that the hanger does…
I had a problem with our robot vacuum cleaner and our norden table. Sometimes the cleaner was stuck under the Table. I created some simple feed to raise the table by 2cm. I printed the feet with extrudr hard tpu.
I found that the tolerances in the standard files resulted in a very loose fit with lots of play for my printer. To solve this I expanded the male end of the dovetail joints on the cases. 0.2mm expansion worked best for my setup (Bambu…
U-Shaped Feet for the NR200/P originally created by Erer2001. I have increased the overall feet height to 3.5cm and increase the thickness in order to strengthen it due to being higher.
☕ Hopper Extension for Krups Roma EA8105 I designed these parts to increase the bean hopper capacity of the Krups Roma EA8105, so you can go longer between refills. With this modification, you can load more coffee beans at once, improving…
I printed the body in ABS and had slight warping at the corners. As a result, the inner bodies could no longer fit. I had to adjust the height of the cover a little so that the corners could fit. I used this filament:…
for Toyota Kaldina printed with PET-G and TPU
Simple key holder for door handle. Prevents the key from falling out. Diameter of the key hole: 6mm Door handle hole size: 23x10mm
same base model, just added a triangle at the back for increased stability
I increased the width of the dovetail by 2.047 mm for a snug fit. The original one was kind of loose for me
This is an extended cover spacer for the K1/K1C, which I needed because the ptfe tube was still scratching my cover. I also installed a water cooling system, and I needed to route the tubes nicely. Это увеличенная проставка крышки для…
Occasionally the dart carrier doesn't drop enough to let the dart be loaded from the tube. This lifter has a taller face so the bolt will force the carrier lower and hopefully solve your feeding issues.
This is a cover for the wall mounts commonly found on older Ikea cabinets to the likes of PAX, METOD, KALLAX and KNOXHULT. If you use beefier screws these covers often won't be able to go all the way back, thats why I also increased the…
Gridfinity bin for Owon HD oscilloscopes.
Nifty little print to use your iphone's continuity camera feature
25mm_plug for ikea sofa increased height 10mm
I took MortalMonkey's Dual RTL-SDR Wall Mount design from Thingiverse and made some changes. I increased the flange size and adjusted the holes so it works with the mmuellerphoto DIN Rail Bracket - Heat Insert Version .
Version with more clearance for the disks
I have a 0.5mm nozzle, so my slicer wouldn't print the 0.5mm walls in the original design Increased wall thickness in motor wire walls and bottom plate to expand compatibility to printers running larger nozzles. Increased minimum wall…
A simple remix of @hl1010's stepper driver fan mount but slightly taller to clear my BTT EZ2209 drivers.
Stackable Storage Bins by Project34 Increased the bin size to 180x300
I used Fusion 360 to remodel the shaft and crank from the original model such that I can adjust the gear ration. I did not know the gear settings used in the original model so I set my own. The files provided are drop in replacements for…
This is a cover for the wall mounts commonly found on older Ikea cabinets to the likes of PAX, METOD, KALLAX and KNOXHULT. If you use beefier screws these covers often won't be able to go all the way back, thats why I also increased the…
☕ Hopper Extension for Krups Roma EA8105 I designed these parts to increase the bean hopper capacity of the Krups Roma EA8105, so you can go longer between refills. With this modification, you can load more coffee beans at once, improving…
![Cable chain for K1/K1C with ptfe guide. Increased for 3mm [All in one]](https://media.printables.com/media/prints/a86c567a-5a3b-4943-9090-cc2aab76416c/images/12639885_c80c9368-1e98-4334-bf4a-66df405cee53_33bcc2dd-4844-4ddb-ba5e-63fdf8453e0e/cablechain.png)
![Cuisinart 14-cup Food Processor Blades and Stem Organizer [increased clearance]](https://media.printables.com/media/prints/865313a7-0bd3-4f1a-8e0b-f184f0d86c8d/images/13622945_5b4ffded-a736-473a-bc50-a4391a3525c8_050f5b92-c830-4857-b11e-3dc10fa10668/pxl_20260820_204402560.jpg)
