757 modeli
Wanted to use my Centrotec bits with my Milwaukee Drill. Made an adapter. There are 3 parts to print. I started by printing all in PETG but ultimately printed the main part in stainless steel via Shapeways here . The other 2 parts (the…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Installation cradle for quick and easy installation of magnetic lock. Print instructions I have printed it in PETG, but would work on PLA or any other material. cradle.stl – More firm, but better use supports. craddle_v3.stl – More…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jednoduchá inštalačná krabica pre rozvod napajania napr. pre svetlá na oplotení. Zo spodej strany je privedený vstup z predchádzajúceho svetla a odchod na dalšie svetlo. Z hora je výstup na svietidlo. Pre dodatočné utesnenie som na hornej…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Generally, bosses for tapping screws installed on the top surface take an overhang shape. Traditionally, to alleviate the overhang, it was necessary to install supports or model the bottom of the boss with a tapered shape. However, these…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
This is a simple, easy to print and easy to use, 3 piece clamping mechanism to facilitate installation of the belts and carriage on the Voron 2.4 and Trident. You need two sets of these, one for each side of the carriage. I personally…
Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…
These are the files needed to mount the 3DChameleon onto the Creality K1 and K1 Max printers. Also included is the profile for the K1 (K1 Max just needs the distances and build plate size adjusted.) To install: Remove the front left screw…
This is a gantry installation hook for voron 2.4. It fits to 2020 extrusions and helps lifting up the gantry to the frame easy. The hook is 12cm long. The lower part is 6mm thick and fits into the extrusion. The upper part has a 2cm wide…
Safety eye installer printed in ABS 0.6mm nozzle with 4 walls and 20% gyroid infill.
The front edge of the print plate should sit 38mm behind the front edge of the frame so here is the jig for that.
As I was installing a Stages crank arm on my Shimano 105 crankset I realized too late that I was missing the tool to remove and adjust the crank cap. I MacGyver'd my way through it but decided to make a tool should I ever need to adjust…
Tool used to install percussion caps on black powder guns
Latest Update: 10.07.2023 - Issue with the mounting location of the AMS filament buffer: In the previous files, the recess for the filament buffer did not align properly with the printer's frame. This caused the backplate to bend and…
Ein kleines Helferchen um die Montage / Demontage einer Fahrradkette zu erleichter. Egal ob Kettenschloss oder Niet. Ich persönlich benutze es hauptsächlich für eine Shimano Road 11-fach Kette. A small helper to make the…
Modified spacer so it locks into the Skadis board to aid during installation I've included both washer and caps for both #8 and #10 flat head screws 6 wall loops 25% infill Shameless Money Grab: ;) If you feel like it, you can support my…
In early 2025, I replaced my two PRUSA MK4S printers with two PRUSA CORE ONE printers (one assembled and one kit). The second MK4S printer had the MMU extension; I kept this accessory to remount it on the one delivered as a kit. I…
I wanted a top spool mount for printing TPU, but so many I found were big, bulky and looked like permanent installations. I designed this to be easily slid on and off the top chasis of the K1 and K1C. There is enough clearance from the…
Hey, i created this Rockshox seal installation tool for 35mm seals like Pike / Lyric / Yari Forks. i would recommend 25-30% infill. 5top, 5bottom
ATTENTION: You need M3 threaded inserts with a length of 3mm and suitable M3 screws. Special feature: Optimized for 0.4 mm nozzles, without supports (but bridging). My recommendation for the print settings: Material: PLA Layer: 0.2mm…
This is a installation/allignment guide for MGN12 linear rails on 2020 extrusions. The fit is quite tight so there is no play when installing the linear rails.
The Freecad file is included if you need to make any changes. Printed in PLA. 0.2mm layers, 3 walls, 15% cubic infill. I uses a dozen installing a 12 ft x 15 ft floor.
(DE) Alles Scheisse? :-) Nein, aber wackelige Toilettensitze sind echt nervig. Deshalb habe ich einen Montageschlüssel zur Befestigung eines Toilettensitzes entworfen. Wenn die Griffigkeit durch die Rändelung nicht ausreicht, kann durch…
Flooring Spacer for Installation of Laminate/Vinyl/Wood. For 1/4” & 1/2” Gap. Designed to stay in place
This is a simple temporary support to help install the primary mirror on your Hadley telescope. Can also be a nice stand to install the cell on the mirror and let it cure (~24 hours) before further handling. Very specific, but it was…
Simple device which clamps to a bicycle rim to keep the bead from unseating while working with particularly tricky or tight-fitting tire installs. Saw a post on a facebook bike mechanics' forum about the Motion Pro Trail Bead Buddy which…
This is a tool to replace the 13mm thick bottle cap recommended by Anycubic and position it in the middle of the bracket, makes life a bit easier when changing the FEP. Size is 220x145mm You'll need to make the top surface of the cylinder…
Adapterplatte für die Installation des Sonoff NSPanel Pro 120 PW auf Standard 68mm Unterputz Installationsdosen mit 60mm Geräteschrauben abstand. Der Adapter funktioniert sowohl für die horizontale wie auch vertikale Montage. Eine leicht…
Added versions for - Holder for 6mm belts and 3mm backer behind extrusion - Holder for 9mm belts with and without backer
Simple tool for installing the Star Fangled Nut on a bicycle fork. Guides the installation straight and sets it at a precise depth of 15 mm. Print will have a one layer skin across the bolt hole - this is to make it print well. just push…
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
Front Crank Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda B6/BP 1.6/1.8 engines (except those with the small nose crank) Simply start the seal on the front crank nose, then slide the tool in place and gently tighten down the…
A self designed terminal block for your solar installation. It was designed to fit a mega fuse as well. It also can be used as a single terminal without fuse. The cover prevents accidantial discharges. All you need is 2 M8x25 plus 4 M8…
Add these wings to your track saw when cutting in a new splinter guard. The wings will let you get to the edge of your track to cut the entire new splinter guard. Can secure to your track with M3 screws. Countersunk screw holes in top if…
This is a model I made to be able to more easily remove the tight multiboard pieces, you can screw it in slightly and then push either left or right. I knurled it for better grip and put a socketed end on to tighten/loosen the bolts and…
This is an easy-to-install version of Tesla Model Y's 2nd row seatbelt guide. You just need to snap it onto the head rest rods without the need to take them out (which isn't straightforward if you don't know how). I also found the…
Rear Main Crank Seal Install Tool for Mazda Miata MX-5 B6 BP Engines As seen in this video: https://www.youtube.com/watch?v=T0L0Rpsbdek
My take on the Wheeler take down pin install tool
Low profile RockShox Dust/Oil Installation Tool for forks using 35mm stanchions. Fits satisfyingly with a "click" on the dust seal. Designed to have a very small footprint to save space in the toolbox for other stuff. Opensource design:…
Milwaukee Installation Drill/Driver (FDDX) Wall Mount. Milwaukee_FDDX_wall_mount_2ah Pictured model. Milwaukee_FDDX_wall_mount_4-6ah Extended 3 mm to fit 4ah + 6ah batteries. Note: Designed for M5 counter sunk screws. Video link:…
LED light mount for Flashforge Adventurer 5X (AD5X) 3D printer enclosure. The Flashforge Adventurer 5X is a great printer, but the lack of internal lighting in the enclosure makes it difficult to monitor prints. The official LED module…
hey guys, i found a lack of halo rings on the whole internet, so i decided to model the whole halo ring in fusion and print it out. you'll need 15 segments (or 30 half segments) to complete the ring. the inside is hollow so you can…
My own IKEA SAMLA 22L Box Filament Spoolholder for a 25mm Installationtube. It's printable without Support. UPDATE 17.02.2019: added a 3mf file for own modifications. Print instructions Category: 3D Printer Accessories Print Settings…
Cam Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda BP 1.8 engines (except VVT intake cam - I have a separate tool for that) Untested for B6 1.6 engines but possibly suits those also. Simply start the seal on the camshaft, then…
This design is based on Adafruit's orginal jig: https://learn.adafruit.com/heat-set-rig I had some 3030 aluprofile pieces at home so at first I decided to fit the original design. Later on I have: changed the carriage mount dropped the…
2JZ Cam, Crank and Rear Main Seal Installers
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…
Easily attaches to the Bambu Lab PS1,P1P & X1 3D printers and provides a compact waste or ‘poop’ collection solution. Strong magnets used are: Q-25-06-02-SN Block magnet 25 x 6 x 2 mm, heat-resistant, holds approx. 1,7 kg from…
This is a remix of this model: https://www.thingiverse.com/thing:4960535 I really wanted to use it with the DDD Wall Control System so I made this. The lock piece is optional. I found that the drill stays on just fine without it but it's…
If your PS5 DualSense thumbstick cover is worn or torn, this replacement cap is an easy solution. It snaps securely onto the existing knob, restoring the functionality and feel without replacing the entire thumbstick. Print Details: Layer…
Also known as the "Deck d--k" on Reddit. This is a quick jig that makes putting deck boards on a deck go a lot quicker. It sets the proper gap between the deck boards, and it aligns with the joist beneath and acts as a screw guide so you…
This mount is to solve the problem of mounting the interchangeable head pieces from the popular (and very useful) Milwaukee M12 FUEL Installation Drill/Driver kit on a Wall control system utilizing the DDD wall control style mounts. Other…
Print, install 4 heatset inserts, use. Uses 8mm m3 to secure to the belts And ~ 30mm m3 to pull togetehr. Best use with PLA or other stiff filaments.
when installing new dust seals in Fox 36 Fork use this tool to perfectly align them. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Hand Tools
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower , I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the…
Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…
These are a life saver when trying to get that detent, spring, and pivot pin installed. I have uploaded this model to save to come back to as I would like to remix one to work with the ar10. please give a like if you download. thank you.
PLA works just fine. PETG is a recommended material given loads and being stuffed in my tool bag. Suggest gyroid infill.
Hi, This design is based off the Pure Grip Green Attachment used to install golf grips: https://www.puregrips.com/products/pure-green-attachment The cost for the item is not expensive if you live in the US. However, the shipping cost to…
VORON AB Belt Installation Helper (Clamp)
Made this to hold twin cam tapered gaskets during installation. Design has bottoming lip to set gaskets at correct depth. Has an M12 1.5 hole in the center to use a bolt as a driver handle.
This is a tool to help spin the retainer ring for Mercedes-Benz electronic ignition system modules. You can use a 3/8" or 10mm ratchet on an extension just like the official MB tool. Don't use screwdrivers (like in the video) ever again!…
I find it tricky to get the bolt installed in the Ruger 10/22. I use a large screwdriver to hold the bolt handle spring and have made too many scratches. I was inspired by the Gunsmither™ - 10/22® Bolt Bar and by chevyfried's bolt holder…
Fit good and stable, for more stable i add holes for some magnet, I printed this in PETG on the Elego Neptune Max with a 42cm x 42cm bed size. You can also split this model if needed and use some glue."
Summary After all the updates I should summarise what's now in this model: A minor remix of Prusa's original Tool Dock model to include magnet poke holes. As well as this simple remix, all the other STLs in this model include these holes.…
If you have a generic CPU chassis that's missing a 3.5'' PC bay cover, you know how frustrating it can be to leave your components exposed. But don't worry, this replacement cover is here to help! It's designed specifically to fit 3.5''…
Do you love Gridfinity? Do you love magnets? Do you hate installing magnets into your Gridfinity bins? Well, you aren't alone. I've always found it to be a particularly fiddly process to make sure you have the right polarity and to keep…
A simple print to ensure your MGN15 Linear Rails are installed parallel with your 2040 Aluminium Extrusions.
Honeycomb fan grill cover for the nextruder head. Featuring honeycomb pattern and a similar height as the extruder cover. Easy install, only need to remove the upper fan screw to assembly. Prevent plastic parts from entering the fan and…
A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…
フロントを上に向けて印刷したほうがきれいです。
Milwaukee M12 Installation Tool Gridfinity base. A combination/remix of a couple of different model. Version 2 should allow for a shorter drawer and use less material.
Note I have updated the jigs but left this version up as it might be of use still. New: https://www.printables.com/model/673666-futures-fins-finboxes-router-jigs-updated I created these jigs to help me install the Futures style finboxes.…
Concealed installation triple box for separate frames . The axial spacing of each box is 84mm! = Not applicable for common frame. The individual boxes are connected at the top and bottom, so there is no twisting during installation into…
I designed this to be used with the Milwaukee 2505-20 M12 Fuel Installation Drill/Driver. However, it could work with any Milwaukee tool which uses the same belt clip, but the angle, when installed, may not work for some tools. I printed…
Set for installing electrical sockets, switches, or lights in insulation. Electrical installation box for insulation. The base is 220 mm and has grooves for shortening. The weight is approx. 125 g (you can adjust the size in the slicer…
This tool is designed to assist in installing the Teflon seal on a fuel injector for a Ford EcoBoost engine. Before using this tool, depending on your printer, you may need to sand the guide part smooth. Simple instructions for this model…
While installing the tiles 'off surface' I was tired of installing and removing tiles and wall supports and back and force just to drill the holöes ... My drilling guide already made life easier, but the tiles were a bit flimsy and…
I designed these parts to mount linear guide rails on the Y axis of my Elegoo Neptune 3. This kit could be used for any 235x235 machine with 4040 Y axis extrusion. The linear rail adapter is universal left and right, which is why it's…
This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…
Cam Seal Install Tool - Mazda MX-5 Miata BP for the Intake Cam Suits the Mazda MX5 BP 1.8 engine VVT intake cam (I have a separate tool for exhaust cam) Included both STL and OBJ versions of the same model. Simply start the seal on the…
This allows you to clamp the XY Belts (GT2, 6mm but might work with wider belts as well if the teeth are the same) with one M3 screw of the X-rail (might need to use a longer one) for easier installation or changing parts without having…
This is a pegboard-mounting holder for the 4x heads that comes with the Milwaukee M12 Installation Driver. It would likely suit the Fein one as well as I believe they use the same mounting/connection style. Hole spacings are 50mm centres…
I didn't want to pay $200+ for a Sir Tools P234 arbor so I whipped this up. I sell these for $15 if you do not have 3D printing capability, but I am offering it (for NON-COMMERCIAL usage) here. That means you are not printing these and…
Door handle installation jig. This is a remix where I changed the dimensions to be metric: - Hole saw (the big one): 54mm diameter - Lock hole (the small one): 25mm diameter The big hole has a 60mm offset (backset) from the edge of the…
This tool is for the Govee Permanent Outdoor Lights Pro installation. It is an installation tool for VisualReversal 's (Printables website) friction grip mounting brackets. It mounts them at a Govee-recommended distance of 8 cm or 3-1/4…
Edit 05/09/2022: I'm adding a new version of the tapping block and leaving the old one in case someone prefers it. I've used the original V1 block for about 9 or 10 hours of hardwood floor installation and while it works quite well in…
Simple to use, printable tool to help install 22mm Schneider XB5 Harmony Front Elements. Loose fit over the nut and screwdriver like feel. Comfortable to use.
I made this tool after getting a used 2018 Sierra Denali that must've been owned by a hamfisted degenerate; all of the cigarette lighter covers had been ripped off and broken. Finding this tool (Dorman 56457) was needed to remove the…
Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…
These are the router templates for installing Futures Fins finboxes. Router out the slot first and then the flange. There are two templates but also and insert that can use used with the flange template. This allows the routing out of the…
I wanted to store the installation tools close to the drill, which is hanging from my Skadis in my Ikea Ivar. So after finding the T-Nut system I did some small modifications to the original and this is the result. Hardware needed: 2x DIN…
I have a unique space and I wanted something to “holster” my M12 installation driver on the underside of a shelf above my standing desk. Most options I could find were wall mounts. I printed it with minimal supports standing up. Due to…
push into the fan, then push the fan into place. one and done. face down, no supports, small layers preffered. 10 min avg print time for 3
The jig helps line up drawer slides/rails and drawers, reducing installation errors. It features a removable stopper that fits in one of the two slots. First slot for positioning the jig inside, to install the slide rail. Second slot is…
Models from the YouTube video, "8 color printing on the Neptune 4 Max (part 1)", for installing CoPrint's KCM Set on the Neptune 4 series of printers. https://youtu.be/HRHlSdWBTfk CX-I extruder mount versions: Version A: All M4 hardware…
Raspberry Pi Zero 10" Rack Mount Bracket Panel - Staffa installazione Pi Zero rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: 06/02/2025 added resized model…
new crocs charm(jibits) bottom (easy install) Category: Fashion
