Wyniki wyszukiwania: ivar

Sortowanie

535 modeli

P
PrintablesOmbra

Rivarossi model train 5523 pylon H0

This is a reference pylon for the Rivarossi 5523 model train bridge, to replicate the different ones simply scale it on the X axis. For reference (in Italian):…

Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
8
Ocena
0
P
PrintablesDecorartor

Vivara Vase

The Vivara Vase showcases a mesmerizing spiral design, exuding a sense of movement and flow. Its sculptural form, with delicate curves and soft, natural tones, makes it a perfect piece for modern interiors. The vase’s unique texture…

Pobrania
1534
Polubienia
526
Ocena
5
P
PrintablesjonnieZG

Acoustic Violin 4/4 - Stridivarius Fiddle

This full-size acoustic violin is an improved version of the model by Woody that I remixed/modded according to the real violin specs from MakingTheViolin.com (original small-size model here ). Some parts are adjusted or remixed, while…

Pobrania
1490
Polubienia
372
Ocena
5
P

Ikea Ivar shelf minimalist legs for converting to table-like shelf

Simple legs to convert any Ikea Ivar shelf to the free-standing table/desk/shelf. Use one wood screw (for each leg) that fits and small enough not to puncture the shelf through. My gf used it as a displey riser and workspace organiser. We…

Pobrania
989
Polubienia
654
Ocena
4,83
P
Printablesross wilde

tree bark wall for vivarium/enclosures

tree bark wall for enclosure wall for your reptiles/invertebrates or even an aquarium scale to any size needed

Pobrania
739
Polubienia
138
Ocena
0
P
PrintablesChris1705

IKEA Ivar Bucket

These are two simple boxes for the IKEA Ivar system. Both together fit perfectly (ca. 11cm + ca.12cm equals the width of the “connecting part” of the ivar shelf). They have a small separator in the middle to prevent things from falling…

Pobrania
661
Polubienia
217
Ocena
4,7
P
PrintablesUlysse

SKADIS - IVAR Connector

Lots of many proposals with Skadis Panel on Printable ! So I decided to buy some Panel but i don't want Drill my Wall. So i make connect who permit with 4 bolts to hang Panel ton my IVAR Shelve with Ivar Pin. Simple ! Enjoy !

Pobrania
643
Polubienia
241
Ocena
4,86
P
PrintablesSandrine P

Renault Trafic_Opel Vivaro_Nissan Primastar - air vent vertical parts

A friend of mine had used all kind of air vent supports and finally the air vent blocks of his renault trafic were completely broken. I found on internet many version of the little horizontal blades but not the long vertical ones. Thanks…

Pobrania
642
Polubienia
44
Ocena
5
P
PrintablesSul_print3d

Capivara operacional

Tornei ela mais operacional

Pobrania
536
Polubienia
52
Ocena
4,5
P
PrintablesUko

IKEA Ivar Rack Clothes Hanger

The normal version requires a 16mm M3 bolt to secure everything in place. Just print the model together; reserve the “filler block"; put the hook over the horizontal side rail of an Ivar shelving unit; hold the filler block in the bottom…

Pobrania
465
Polubienia
162
Ocena
5
P
PrintablesKIL0

IKEA IVAR Side Rail

Side rail for IKEA IVAR shelve (30cm)

Pobrania
447
Polubienia
151
Ocena
5
P
Printableshector yanes

Ikea Ivar Hooks

Needed some hooks for my Ivar shelves to hang things and came up with this. It's a tight fit because I wanted the hook to stay on under its own friction. Printer Settings for Good Quality: Used PLA+ from Sunlu. No supports. I used brim to…

Pobrania
447
Polubienia
122
Ocena
4,9
P
PrintablesWDeenik

IKEA Skadis Ivar Mount

These are hooks which you can use to mount a 36x56cm IKEA Skadis pegboard onto a 50cm deep IKEA Ivar system without having to use screws or modify your Ivar system in any way! Note that these were specifically designed for a 50x179cm IVAR…

Pobrania
433
Polubienia
146
Ocena
4,83
P
PrintablesBuschi

IKEA Ivar Cable Management Clip

I simple, yet effective cable management clip for IKEA's Ivar cupboard system. Small hooks at the back of the clip grab into the shelf holding holes and hold the clip firmly in place. Printed all my clip in plain Prusament PLA and had no…

Pobrania
432
Polubienia
124
Ocena
5
P
Printablestristan

IKEA SKADIS IVAR Side Mount (for 30cm deep version)

Remixed the hooks to mount an IKEA SKADIS pegboard to the 30cm deep version of an IKEA IVAR. This needed a bit more space between the hooks since the SKADIS is hanging in front of the vertical IVAR legs (instead of “between” them, as for…

Pobrania
350
Polubienia
103
Ocena
5
P
PrintablesKnaudler

Opel Vivaro Flügel für die Lüftungsklappen - Renault Trafic

Ersatzflügel für die Lüftungsgitter eines Opel Vivaro 2003 oder auch Renault Trafic inkl. Fusion Datei Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,12 Infill: 50…

Pobrania
350
Polubienia
29
Ocena
5
P
Printablesbatman

Ikea Ivar Bookend

A simple 3D-printed version of a bookend for Ikea Ivar bookshelves based on this design (60mm x 232mm x 18mm). Print slots up to avoid overhangs and print without supports. Best printed with 0.6mm nozzle to reduce print time but should…

Pobrania
332
Polubienia
95
Ocena
4,83
P
Printablesmlax

IKEA Ivar board no wooden parts for 30cm depht

With this model you can make some shelfboards which are compatible with an Ikea Ivar shelf. I made these because I have a door between two Ivar shelfs and I wanted to use also the space over the door, and because there was no Ikea…

Pobrania
328
Polubienia
100
Ocena
5
P
PrintablesBillie Ruben

Mount for attaching IKEA SKÅDIS pegboard to side of IVAR shelves

These little attachments will allow you to mount the 36x56cm Skadis to the side of the 30cm deep Ivar shelves (both from IKEA). They are very economical, all parts printing in less than an hour total and using about 15g of filament.…

Pobrania
300
Polubienia
179
Ocena
5
P
PrintablesScoutPrinting

Vaxhall/Opel Vivaro / Renault Trafic / Nissan Primastar speaker adapters 6.5" / 17CM speakers

This 3D-printable speaker adapter was designed to fit aftermarket speakers in a 2012 Vauxhall/Opel Vivaro (Vivaro A) camper conversion. I created it for a family member after being unable to source a suitable adapter in time for a planned…

Pobrania
271
Polubienia
29
Ocena
0

Terrarium / Vivarium Bulkhead style vent

Low profile "bulkhead" style screw in place vents for terrariums/vivariums. The mesh features 1.2 mm holes with 0.8 mm ribbing. Both the insert and nut have M28 threading with wide tolerances for easy printing. The low profile design is…

Pobrania
264
Polubienia
36
Ocena
5
P
Printablesserialc

Ivar hook

A simple hook for IVAR shelves. Version 2 is stronger and snugger. It slides less easily laterally.

Pobrania
255
Polubienia
52
Ocena
4,88
P
Printablesmlax

IKEA Ivar board no wooden parts for 50cm depht

With this model you can make some shelfboards which are compatible with an Ikea Ivar shelf. I made these because I have a door between two Ivar shelfs and I wanted to use also the space over the door, and because there was no Ikea…

Pobrania
253
Polubienia
79
Ocena
5

Capivara articulada

Esta é uma capivara articulada projetada para impressão 3D, composta por peças móveis que não requerem montagem com parafusos ou colas. É perfeita como item decorativo, brinquedo ou presente para amantes de capivaras! Instruções de…

Pobrania
248
Polubienia
15
Ocena
0
P
PrintablesOG_3D

Ikea Ivar Holder

Ikea Ivar Holder

Pobrania
248
Polubienia
71
Ocena
4,5
P
PrintablesViktorStiskala

IKEA IVAR drawer support

This 3D model is a drawer support designed to prevent sagging and improve the functionality of your drawers. It is specifically made to fit IKEA IVAR drawers, but can be used with other types as well (possibly with little modifications).…

Pobrania
239
Polubienia
55
Ocena
5
P
Printablessofastar

IKEA IVAR shelf slim bookend

A slim bookend for the IVAR shelf made by IKEA. As it is a slim model, it might not be suited for large or heavy books.

Pobrania
236
Polubienia
74
Ocena
4,5
P
Printableskrisennerd

IKEA Ivar Spool Holder

A spool holder for the IKEA Ivar shelf. The Holder works without extra attachment. If you wand more security, you can add an M4 hex nut and a M4 screw.

Pobrania
230
Polubienia
57
Ocena
5
P

Shelf Hole Cover Plugs / Filler (e.g. IKEA METOD, PAX, BILLY, IVAR, BESTA, PLATSA)

Summary Conceal unused shelf holes in cabinets and bookcases for a cleaner, more refined look – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring compatibility…

Pobrania
228
Polubienia
47
Ocena
5
P
PrintablesBrad Grier

Ivar Skadis adapter mount (without screws)

New workspace Moving in to a new place allowed the creation of a new workshop. Ikea Skadis pegboards are great and I had a few in my old space but didn't want to screw them to the walls in the new space. This design allows using Skadis…

Pobrania
223
Polubienia
64
Ocena
5
P
PrintablesMadeWhatNow

IKEA IVAR drawer cutlery organizer / flatware tray

IKEA has a funny sense of humor and sells a drawer for the IVAR shelf system which can only fit one of the smallest cutlery trays (SMÄCKER) - and that one only sideways.This is less than ideal for two reasons: one, this places the…

Pobrania
214
Polubienia
52
Ocena
0
P

Shelf Hole clip-in Hook (e.g. IKEA METOD, PAX, BILLY, IVAR, BESTA, PLATSA)

Summary Make perfect use of the shelf holes in your furniture body and create new possibilities! – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring…

Pobrania
206
Polubienia
64
Ocena
5
P
PrintablesSilson07

Plato stoleček k rybářskému křeslu. Plateau to fishing chair. Mivardi

Plato k rybářské židly. Plateau to fishing chair. Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.

Pobrania
206
Polubienia
41
Ocena
0
P
Printablesklaxalk

Large Hook for IKEA IVAR (parametric)

The hook is designed to be printed on its side without supports . I included a layered bridging section. The default hook length is 40 mm , so most of the normal bags will fit. The hook features notches that will lock it around the wooden…

Pobrania
205
Polubienia
41
Ocena
5
P
PrintablesWebmediArt

Peg for IKEA IVAR system (OpenSCAD, parametric)

Recommend to print in PETG. With high Infill value or even better with 10+ perimeters, and layer height of >0.2mm. In case you need to adjust the design, the OpenSCAD file is made available (though it is a very basic model to say the…

Pobrania
198
Polubienia
42
Ocena
5
P
PrintablesFormiilo

Ivar Spool Rack

I was looking for a cheap and easy solution to store filament spools in the Ikea Ivar shelving system. This version only needs half of the side units width. This frees the other side for further shelves or attachments and allows to mount…

Pobrania
189
Polubienia
53
Ocena
5
P
PrintablesLuca

IKEA IVAR Coat/clothes hook/hanger

This is a simple hook for hanging your stuff on the side of the very famous and used IKEA IVAR shelf system. Although it is marked a remix because the shape is taken from an existing model for a generic wall hook, it is a redesign from…

Pobrania
188
Polubienia
25
Ocena
5
P
PrintablesValentin B

Kitchen Paper Roll Holder for Ikea IVAR

This two-part kitchen paper roll holder fits the Ikea IVAR shelves (30cm depth version). The two pins slide into the holes to secure the holders in place. Six versions are available, for kitchen rolls of diameters max: 120mm, 150mm or…

Pobrania
187
Polubienia
55
Ocena
5
P
PrintablesTill

Cable Holder for Ikea Ivar (USB-Cable)

Befor printing check which Version of Ikea Ivar you have. There are two one 30cm and one 50cm. Chose the right file for printing. In your slicer press the auto rotate for easier printing. No supports needed! Preparation after printing:…

Pobrania
186
Polubienia
42
Ocena
4,5
P

Renault Trafic / Vivaro Coin Holder Upgrade

Works really well! The two part snap together base allows it to be printed with no support. Snaps or glues together depending on the tolerance of your printer! The base can be used as a standard and new accessories made to mount on it.…

Pobrania
181
Polubienia
18
Ocena
5
P
PrintablesMadebyaCat

Strong Ivar bracket

The original design is great but had some flaws I made some changes to make it much stronger. Suggest at least 30% infill. Moved the screw holes closer to the ends to prevent bending when on load. Smaller dowl hole to hold tighter

Pobrania
179
Polubienia
42
Ocena
5
P
Printablesfrdmn

Adjustable foot for IKEA IVAR (and other tables and furnitures)

I needed some adjustable feet for my IKEA IVAR shelf and found this great design by ffleurey on Thingiverse . Remixed it based on the included OpenSCAD file to fit under the feet of IVAR. Needs an M8 nut for the mount and a bolt for the…

Pobrania
177
Polubienia
47
Ocena
5
P
Printablesmotarr

Strong IKEA Ivar Shelf Mount

Please use the original steel pins, supplied with every IVAR shelf. The shelf should be screwed from beneath through the mounts. 3x25mm should be okay. The OpenSCAD file is als a complete mess, but I added it for completionists sake.

Pobrania
173
Polubienia
46
Ocena
0
P
Printablesctheroux

Ikea Ivar Side Unit Angled Container

These are angled containers for the Ikea Ivar side units. Support is required. An infill of 20% is recommended. This object main web page is: http://www.ctheroux.com/ikea-ivar-side-unit-angled-container/. This object was designed using…

Pobrania
171
Polubienia
64
Ocena
4,5
P
Printablesalvarin32

IKEA Ivar gap kit

Does your IKEA Ivar cabinet have a large gap between the doors? Mine does, and I could fix it with this IKEA Ivar gap kit! Just print four of those spacers, place them behind the hinges and you have just fixed your problem. Whether it is…

Pobrania
170
Polubienia
20
Ocena
0
P
Printablesinjectx

IKEA IVAR shelf cable holder

Cable holder for IKEA IVAR shelves, for example for your printer (like me). Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Category: Parts

Pobrania
170
Polubienia
44
Ocena
4,83
P
PrintablesRagingLibrarian

Ikea Ivar shelf double minimalist legs

Use PLA/PETG with 15% infill. Adjust for bigger loads. To secure, use one small wood screw.

Pobrania
170
Polubienia
82
Ocena
3
P
Printablesquixoticgeek

Ivar Bucket

A simple bucket for storing stuff in the space between the verticals of a 30cm deep Ikea Ivar upright. It hangs off 4 ivar pegs. You can either get extras as spares from Ikea (ask at the service desk), or you can just use some 6mm metal…

Pobrania
169
Polubienia
41
Ocena
4
P
PrintablesDaSch

Halter für Ikea Ivar Regalboden

Da bei Ikea die Eckregalböden der Serie Ivar ausverkauft sind, habe ich mir aus 18mm Dreischichtplatten selbst welche gebastelt. Diese Verbinder halten den Regalboden auf der gewünschten Höhe und ist so abgestimmt, dass dieses wieder auf…

Pobrania
169
Polubienia
37
Ocena
5
P
PrintablesHelmi

Ikea SKADIS + IVAR mount (with heat inserted thread)

I need a way to mount my big SKADIS panel to the IVAR shelves in my shop as I didn't want to drill the walls in my basement. The Original model of this made by @Ulysse_312186 was quite a good fit for me but I didn't like the fact that i…

Pobrania
167
Polubienia
28
Ocena
5
P
PrintablesWolf3D

IKEA IVAR, shelf wall mount bracket

Needed to mount my IKEA IVAR shelf to the wall, but with a stand-off to route cables along the wall. As i couldn't find a proper wall mount i designed my own. Mounts with 2 screws on the shelf and 1 screw on the wall, creating a 50mm…

Pobrania
167
Polubienia
33
Ocena
4,67
P
PrintablesJS

Ivar wall mount

Printed in PETG I directly drilled in the top hole and I 5*25 hammer-in plug to hold it to the wall ( https://www.fischer-international.com/en/products/frame-fixings/hammerfix-n/hammerfix-n-s/50352-n-5-x-50-25-s-100 )

Pobrania
167
Polubienia
59
Ocena
5
P
Printablest0b1

Cable holder for IKEA IVAR shelf

This is more a redesign than a remix. I have created a slightly beefier version for more than one cable plus an additional variant for use with a ziptie. Both have a small hole for a thumbtack, which I found useful. I also noticed that my…

Pobrania
166
Polubienia
59
Ocena
0
P
Printablesjariq

IKEA IVAR Drawer Label

Holder consists of two parts: Base - it hooks onto the top of the drawer Frame - it slides onto the base and holds the paper label Holder does not require any screws so it won't damage the drawer. Prints nicely with PLA and no supports…

Pobrania
164
Polubienia
53
Ocena
5
P
PrintablesMr. T

Fiskars shovel holder for IKEA'S IVAR

Height of the holder matches height of the Ivar side plank: 40 mm. Use 25 mm screws, if the shelf is right behind the plank, screw could be longer. 20% infill, 3 perimeters, PETG recommended, print in place, no supports needed.

Pobrania
159
Polubienia
16
Ocena
0
P
PrintablesVlado Turek

IVAR - barriers

A cover between stands used to cover the hole. Designed for the Ikea IVAR system.

Pobrania
158
Polubienia
77
Ocena
1,5
P
Printableswllmx

IKEA Ivar mount

Mounts to the inside of the supports. Fits perfectly, super secure, any printer can print this without support.

Pobrania
158
Polubienia
16
Ocena
2
P
Printableshefrimu

cloth rail holder for IKEA ivar

With two of this parts plus e.g. a wooden curtain rod ø=28mm in suitable length, it is easy to add a clothes rail between two side parts of the IKEA IVAR system. A small ø3.5mm x 10mm wood screw secures the holders in place. Print…

Pobrania
154
Polubienia
41
Ocena
0
P
Printablesitsamemario

IKEA Ivar Spool Holder

Snaps directly onto the shelf pins. Holds two 20mm beams. I used pine, but recommend something stiffer if you go for the wider shelf. The pine holds up for quite a while now but I've switched to 20x2mm steel nonetheless There are only…

Pobrania
153
Polubienia
39
Ocena
0
P
Printablesdiscwolf.com

Ikea Ivar cable management

A simple arc that can be stuck in the holes of an Ikea Ivar shelve and will help with cable management. The modell has a slightly thinner profile at the two ends and thickens towards the arc to better stay in the holes. If you have…

Pobrania
152
Polubienia
38
Ocena
5
P
Printableswllmx

IKEA Ivar Feet

Parametric model that allows adjusting the height of the feet in case you've got an uneven floor. Only the inner height is adjusted so they all appear evenly tall.

Pobrania
146
Polubienia
37
Ocena
5
P
PrintablesMr. T

SKADIS - IVAR Mount

SKADIS fits IVAR perfectly, requiring only these four little additions. The hole in the mount is tight enough to secure the pegboard without a nut, but you can always add an M4 nut for extra security. Print in any material; I used PETG…

Pobrania
143
Polubienia
64
Ocena
5
P
Printablesinjectx

IKEA IVAR Spool holder

Because my Prusa sits on a paver, I could not use existing spool holders. Decided to design my own. Just print two and put then on each side of the wooden 'rail'. Holds a cutdown broomstick up to 29mm in diameter. Made screwholes for M6…

Pobrania
140
Polubienia
66
Ocena
5
P
PrintablesMax

Ivar Headphone hanger

should fit any standart Headset and the standart Ivar shelf

Pobrania
139
Polubienia
19
Ocena
4,88
P
PrintablesVedarinis

Vivaro, Trafic, Primastar & others double back door van rear view camera housing, attachable to the door glass

Camera is generic square 24x24mm chinese reverse cam from aliexpress, amazon or so, you only need to remove original bracket to fit it. Housing just clips onto the glass corner, no glue required, holds perfectly.

Pobrania
138
Polubienia
18
Ocena
0
P
Printableserni

IKEA IVAR Hook

Print with support for the tab.

Pobrania
138
Polubienia
49
Ocena
5
P
PrintablesLyn

Sturdy SKÅDIS IVAR mounts

These mounts allow you to fix a SKÅDIS pegboard to the side of a 50 cm IVAR shelf (Ikea). Specifically, they will attach a small SKÅDIS (36x56 cm) to two 54.5 cm apart horizontal IVAR side boards. On my 226 cm tall IVAR, that's the 3rd…

Pobrania
137
Polubienia
50
Ocena
5
P
Printablescz8pru

Ikea Ivar - legs

https://www.ikea.com/cz/cs/p/ivar-bocnice-80494366/

Pobrania
135
Polubienia
28
Ocena
5
P
PrintablesJD Vinyl

Remote control holder - Livarno lights

Wall holder for remote control of the Livarno ceiling light. Designed for double side tape fixation.

Pobrania
130
Polubienia
13
Ocena
5
P
Printablesquattro

Jabra Evolve2 65 Headphone holder for IKEA IVAR shelf

As I heard about the contest, I thought my other design (Webcam Cover) would fit perfectly into this category. unfortunately I had already published it shortly before the contest begun so I could not use it for the contest. Today I was…

Pobrania
129
Polubienia
29
Ocena
5
P
PrintablesMarko2402

Minimal Parametric Ivar Cable Holder

This is a very minimal, but effective way to guide cables along an Ikea Ivar shelf. You may need to adjust sizing for your printer. Mine fits snugly, and holds cables well, without being difficult to remove. There's an OpenScad File…

Pobrania
128
Polubienia
35
Ocena
5
P
PrintablesDion

Ikea IVAR shelf extender to add space to the front

This adapter adds the ability to extend an existing shelf to the front (30cm), in case it is not deep enough. I use it to place my Elegoo Phecda on a 50cm deep IVAR shelf.

Pobrania
121
Polubienia
37
Ocena
0
P
PrintablesSnajo

IKEA IVAR Foot Shoe Cup

I modified Hanes244's model to serve soley as a protective cap for the base of my Ikea Ivar Shelf feet. Compared to the original model, I made it shorter and added interior ribs so it fits snug on the leg. I also added beveled channels in…

Pobrania
121
Polubienia
16
Ocena
5
P
PrintablesFM

Ikea IVAR hook

Printed with 100% infill PLA from francofil.fr Tested with 15 kg over several weeks, no issues.

Pobrania
121
Polubienia
36
Ocena
0
P
PrintablesMartyn Welch

IVAR SKADIS Adaptor

A screwless adaptor inspired by the design by @BradGrier to hold a 76cm x 56cm IKEA SKADIS pegboard between the uprights of a IVAR shelving unit. This design has been made so a single design can be used to mount all 4 corners of the…

Pobrania
120
Polubienia
28
Ocena
5
P
PrintablesStarForge

Tropical Tiki Hut Reptile Hide for Terrariums and Vivariums StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Pobrania
120
Polubienia
20
Ocena
0
P
Printablesjmatwick

Parametric IKEA IVAR Hook

This is a customizable hook designed to snap onto the cross members of IKEA IVAR side units (Like these ). The STL file included is for the small hook shown in the pictures; It is perfect for things like keys or cords. See the section…

Pobrania
119
Polubienia
35
Ocena
5
P
PrintablesTobi

Ikea IVAR Besenhalter

Print instructions Nozzle: 0.4 Resolution: 0.2 mm Infill: 20% Support: not necessary PLA

Pobrania
117
Polubienia
18
Ocena
5
P
Printablesptitluc

Ikea Ivar steelsheet holder, any Ivar depth

the part Yet another steel sheet holder, with 5 degrees tilted slots so the sheets won't fall. I made it to fit any Ikea Ivar shelf, but it would not be difficult to remix it for another holding system. There are two STL : one to use on a…

Pobrania
117
Polubienia
33
Ocena
5
P
PrintablesHanak1nSolo

Ivar Customizable Shelf Label

This is a clip on shelf label for your Ikea Ivar shelfs. It's here to make organizing your shelfs easy. That way, no one can claim they don't know where things are going. It is highly customizable to your needs. Simply add the desired…

Pobrania
117
Polubienia
39
Ocena
5
P
PrintablesEzequiel
Pobrania
115
Polubienia
4
Ocena
5

IKEA IVAR Paper support

ENG Paper support for IKEA IVAR. If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Supporto per rotolo scottex per scaffali IKEA IVAR. Se vi piace e volete supportare il mio lavoro, vi…

Pobrania
114
Polubienia
18
Ocena
5
P
PrintablesMattMakes

IKEA Ivar Bucket Remixed (for length)

Printed on Prusa MK4 With Amazon Basic PLA 20% Gyroid Infill on 0.20mm SPEED Supports on build plate only

Pobrania
112
Polubienia
27
Ocena
5
P
PrintablesLucasdlb

IKEA Pegboard SKADIS hinge for IVAR

The hinge has a cutout for reinforcing with 4mm screws in the bottom. Attach the Skadis pegboard to the M4 threaded inserts. Made so that the pegboard would stay in front of the shelves.

Pobrania
112
Polubienia
49
Ocena
5
P
PrintablesSir Thommes

Regalhaken für IVAR-Regal

Ein einfacher Haken für das IVAR-Regal von IKEA. Wird einfach nur auf die Seitenstrebe (siehe Bild) gesteckt. Auf dem Bild sind zwei Stück zu sehen. Ist ziemlich stabil. Filament sollte egal sein. Support wird nicht benötigt.

Pobrania
109
Polubienia
12
Ocena
5
P
PrintablesJanovich

Ikea Ivar Shelf Plank

30 and 50cm wide short Ivar plank Can be remixed to custom length Great for fitting your Ivar into the full room length To get the infill pattern visible on the bottom set top layers to 0.

Pobrania
109
Polubienia
35
Ocena
0
P
PrintablesLNPprints

Terrarium / Vivarium / Aquarium Acrylic Sheet Lid - Clip / Lid Holder

The idea was simple, to just put an acrylic sheet on the terrarium and after a quick first prototype we arrived at this clip, that serves us well, maybe others can use it too. Happy printing, we decided to go with PETG, because of…

Pobrania
107
Polubienia
24
Ocena
0
P
Printablesross wilde

tree bark wall with opening for vivarium/enclosures

tree bark wall for your vivarium's with an opening if you have a pet that likes to climb and hide

Pobrania
105
Polubienia
40
Ocena
0
P
PrintablesPreppen

Spool Holder for Ikea Ivar shelf system

I needed a spool holder to put on the side of my IKEA Ivar shelf since the one included in the Prusa Mini kit took up too much desk space. I used the 608Z ball bearings from the Prusa Mini spool holder. It's attached to the base with a…

Pobrania
101
Polubienia
32
Ocena
4
P
PrintablesTweeSokken

IKEA ivar spool holder bracket

These parts fit in the holes on IKEA ivar shelves, and take a 12mm rod or pipe you can cut to length as a spoolholder. I made these to hang my filament next to my printer, which lives in an Ivar shelf.

Pobrania
101
Polubienia
31
Ocena
5
P
PrintablesThebigfoot

IKEA IVAR Hook snap-on

Hook that can fit IKEA IVAR side supports. Available in 12 and 6mm width of the hook tip. The snap-on is pretty satisfying and avoids unintentional detachment of the hook. Printed with 3 perimeters in 0.3mm layers and 20% fill in 18min on…

Pobrania
95
Polubienia
17
Ocena
5
P
PrintablesStarForge

Rocky Dome Reptile Hide Shelter for Terrariums and Vivariums StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Pobrania
94
Polubienia
13
Ocena
0
P
Printablescalvinbui

IKEA IVAR Filament Spool Holder

This fits the IKEA IVAR shelf set, where I keep my printer. I noticed one side of holes is closer to the edges than the other on all 3 of my IVAR side units so that is why the pins are closer to one side than the other. Recommended you…

Pobrania
94
Polubienia
20
Ocena
4,5
P
Printablesctheroux

Ikea Ivar tool holder

This is a tool holder designed to be hung on the side unit of the Ikea Ivar shelving system. Support material is required. An infill of 20% is recommended. This object main web page is: http://www.ctheroux.com/ikea-ivar-tool-holder/. This…

Pobrania
93
Polubienia
30
Ocena
5
P
PrintablesCanislupus

Ivar Side Hook

As I had issues printing the overhangs of the original version because of the rounded edges I decided to create a hook with steep chamfers. More or less I only took the middle slice of the original form and created a new model out of it.…

Pobrania
92
Polubienia
18
Ocena
5
P
PrintablesJann Wieland

IKEA Ivar 50 cm Spool Holder

Snaps directly onto the shelf pins. Holds up to four 20 mm beams for two row storage and is connected with a dovetail and two M4x30 screws. I recommend 20x2 mm aluminium beams. In spirit of the original model I've attached the CAD files…

Pobrania
92
Polubienia
20
Ocena
5
P
Printablesspielundzeug

IKEA IVAR hook

I made this hook for the IKEA IVAR shelves. They sell you smaller hooks but we needed something bigger to store all the bibs for our daughter. It seems like you need a lot of them to raise children for some reason. I modeled it in a…

Pobrania
91
Polubienia
23
Ocena
5
P
PrintablesOlegD

Ikea Ivar shelf holder

Here’s the story: I needed an extra shelf for my Ivar setup, but I couldn't find the 83x30 shelves anywhere. Super frustrating! But instead of giving up, I decided to improvise. I got an 80x30 shelf and went full DIY. I used PETg to 3D…

Pobrania
91
Polubienia
20
Ocena
0
P

Ikea hinge 3mm spacer for Ivar cabinet

These were missing in the packaging i received so i drew them in Fusion 360 and printed them out. Now the doors on my Ivar cabinets fit and are well aligned. I've attached the fusion 360 file, so feel free to remix it. These spacers are…

Pobrania
90
Polubienia
6
Ocena
0
P
Printablesmrturnit

Ivar gap bridge

a 47cm bridge to fill the gap between two large ikea ivar cabinet elements. Print the element two times. Design idea I designed a flexible joint for two reasons: to fit it into my prusa (sideways) to respect the different length you need…

Pobrania
88
Polubienia
46
Ocena
0