Liczymy pasujące modele…
First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Screw: diameter: up to 6mm length: 30mm or more
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren , I made one. The shelf uses 4 peg holes and more can be mounted next to each…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Printing Instructions I had no issues printing the thing in PLA on my Prusa Mini + with 0.2mm layer height and using no support or anything.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Here's my wire and cable holder, specifically designed for the Skadis storage system. This innovative holder is designed to fit into your Skadis board, providing an elegant and practical solution for cable management. Its design is…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…
Wydruk około 4,92 €–6,01 € nettoWstępna wycena jednego wariantu
Included a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
Wydruk około 16,63 €–20,33 € nettoWstępna wycena jednego wariantu
This was printed with a 0.6mm nozzle, & 0.35mm layer height.
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bracket for a wire cutter. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Caliper bracket for Ikea skadis or similar. The hooks have an end to end spacing of 84.40mm. If you want to place the hooks yourself I leave you the following addresses. Original model of the bracket:…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
Wydruk około 1,95 €–2,39 € nettoWstępna wycena jednego wariantu
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Wydruk około 8,24 €–10,07 € nettoWstępna wycena jednego wariantu
Intro Designed for the wire cutters, side cutter, shears, clippers, snippers, and/or pliers that a hobbyist might have laying around on their workbench. Three versions so you can decide how many angle cutters or pliers you want to hold…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
This is for Ikea Skadis to organize even the bigger Bottles like the 200ml (Thinner,Cleaner, e.g.) As I was searching for such Holder and didn't find any, I created some. Now I have all Types clean at the wall mounted ready for picking…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Organize that Skadis! Download these Skadis compatable organizers today, and keep your workspace free of pens and benchies 😉 This design uses the Skadis T-Clip System by Will , you can download the required clips from there! You will need…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Found this jewellery tree on Thingiverse and wanted to design a mount for my Skadis pegboard. It uses the Skadis T-Clip System by Will and has 2-3 mounting points, depending on the version. The original was quite small, so I scaled it to…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Simple SKADIS peg board holder for a combination square. Printed at 0.2mm layers, 20% infill, no supports.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plastic hammer holder Ø 42 mm Holder for Ikea Skadis
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Google home mini holder for Ikea Skadis
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Bracket for a Wera screwdriver. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 Inbus 1,5 Screwdriver and Inbus 2,5 Screwdriver You can find the whole IKEA Skadis…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ikea Skadis dice holder. Compatible with RPG dices: d100 d20 d12 d10 d8 d6 d4 There are two versions of this model - with and without D&D logo (see below) Orginal authors: This model is a remix of @Shmoee “ DnD Seven Dice Container with…
Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu
A simple holder for tweezers that only requires 2 slots in a row.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
🇬🇧 Here is a Tapo C200 camera mount for the Ikea Skadis panel. Printed in 0,2mm with 20% infill (The camera isn't heavy). The hooks need supports to print. Fusion 360 file included if you want to make changes. 🇫🇷 Voici un support de…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Halterung für eine Pinzette --> für das IKEA SKADIS Pegboard Ohne Stützen druckbar (auf dem Kopf) ----------------------------------------------------------------------------------- Follow Rhön Bastel: Instagram : claudio_gessner oder…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
I had some real estate left on the Skadis pegboard and 3 spare wireframe skulls by philnelson https://www.thingiverse.com/thing:1388237 Of course i'm going to the mount skulls onto a pegboard! The adaptor is designed to fit the skull…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on whocares333's Sonoff Zigbee 3.0 Dongle Mount. I added two hooks to mount this sideways on a Skadis peg board. Printing needs some supports for the holding brackets and the Skadis hooks.
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…
Wydruk około 22,67 €–27,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a slightly bigger inside diameter to house a larger bottle. In my case it was a 3DLac aerosol can with a 2-1/16" diameter. MKE Dan's models looked great so I remixed it to be a bit taller, and with a 55mm inside diameter. I…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
Old Babylonian culinary tablet (1900-1600 BC) with Akkadian recipes for 25 stews. Stews from this tablet were studied, cooked & served at An Appetite for the Past at NYU in May 2018. For more info, please see: Martell, B. What did ancient…
Wydruk około 11,43 €–13,97 € nettoWstępna wycena jednego wariantu
Holder For Nintendo Switch OLED
Wydruk około 5,64 €–6,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FEJKA potted plant, artificial IKEA, Skadis mount with a hole diameter of 75cm
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
This is very compact wall mount holder / IKEA Skadis Pegboard holder for metric Wera Joker 6000 wrenches. It's width is below 57mm so this set wont take to much space on your tool wall. Screw holes are 5/7mm at 45mm distance. If you are…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Spacers for IKEA Skådis are accessories that allow you to mount the perforated Skådis panel on various surfaces, such as walls or wardrobes, while maintaining some distance between the panel and the mounting surface. This spacing is…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Takes up very little space and fits snuggly onto the pegboard, prints under an hour just fine. Adding supports under the top peg is recommended. I printed it in PETG, but any material should work.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
This is a holder for Knipex pliers for the Ikea skadis pegboard, printed in one part. It fits Knipex model 70 15 110 and Knipex model 08 05 110 I designed this model completely new from scratch, but it is inspired by Aaron s Knipex holder…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This beaker mounts to the IKEA Skandis pegboard. The beaker has an inside size of about 16x50x114 mm³. It holds make-up articles like lipstick and eyeliner. It shall be printed with a flat side to the printbed. Support is needed for the…
Wydruk około 4,00 €–4,88 € nettoWstępna wycena jednego wariantu
I needed a place to put my PSVR2 away that helped to keep dust off of the lenses. This model also was made so that I could attach it to my Ikea Skadis board. I'm using 8/32" hardware to mount it as I wanted it to be secure.
Wydruk około 5,40 €–6,60 € nettoWstępna wycena jednego wariantu
I wanted a holder where i can quickly access my Scraper. Updates: 2024-09-22: Added V2 of the Model with a more tight fit. Works great for the black and white Skadis Boards. Information for Printing: Use Support for the Hooks.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Add light for your Ikea Skadis. 8 Grams No support needed
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
With this model you can hang marmalade glass jars from the “Bonne Maman” brand from your IKEA SKÅDIS board. Specifically, this holder is made for the Bonne Maman marmalade jars whose lid has a diameter of 85 mm. This brand is popular in…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
No need for Supports. I printed it with PLA. I would recommend to print the Twist-Clips with PETG.
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Skadis rail can hold photos, notes or the favourite drawings from your kids. Simply slide the paper into the rail and the bar inside will grab onto it. To remove it pull firmly on the paper and it will slip out of the rail. There are…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Ikea Skadis holder for Bose Soundlink Revolve Speaker
Wydruk około 4,68 €–5,71 € nettoWstępna wycena jednego wariantu
An Ikea Skadis (pegboard) holder for Ryobi 40V batteries. There is also a mount on the side that the charger can be hung on. I designed and tested it with the 4ah battery, but higher capacity batteries should have a similar cross-section…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
adapted the size to fit a 43x50mm powerstrip
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadi Model of Skadi’s Skull with Stand Collection: BadAssGodCollection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Can be enlarged, but reducing the size is not recommended due to the delicate spikes.…
Wydruk około 6,32 €–7,72 € nettoWstępna wycena jednego wariantu
This is a horizontal version of Haymount's vertical holder.
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of having no way to neatly store and Display your Nintendo DS / DSi Game Collection ? Then this easy Print is the solution for you. For the whole row you need 4x “DSGameStack” and 2x “DSGameStackshort” Or if you are using my Print…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
I redesigned the wall mount for a Philips hue bridge fitting on the IKEA skadis punchwall. I made the walls quite thicker (2mm) to get a more stiff structure. Furthermore I made the skadis hooks a little bit smaller, so they fit more…
Wydruk około 2,56 €–3,12 € nettoWstępna wycena jednego wariantu
Skadis container lock Skadis containers have the tendency to progressively slide out of their supporting lid then fall when the board is subjected to vibrations or shocks. This addon provides a simple system which automatically locks the…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
I got the Universal Paint Rack by Proscale the other day and sadly couldn't mount it to my IKEA Skadis wall. So made these hooks. I included the project file with variable layer heights, so that the mid-section of the right hook is…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
SKADIS (Lochraster) Halterung für die LEDBERG Lichtleiste von IKEA Habe die Schrauben verwendet die mitgeliefert waren. Link zur Lichtleiste: LEDBERG Lichtleiste, LED, bunt - IKEA Deutschland Druckzeit : ca. 2 Stunden // 10g Viel Spaß…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Simple and fast to print mount for homematic IP Access Point suitable for IKEA Skadis punchwall. You can easily hang the holder in the Skadis wall and attach the HMIP AP with its mounting holes / drill holes. I printed on a high…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
NOT TESTED designed for AAAA batteries with. R 8,3 mm L 42,5 mm
Wydruk około 1,96 €–2,39 € nettoWstępna wycena jednego wariantu
Small form factor IPad/Tablet stand for your Ikea SKADIS wall utilizing the T-Nut mounting system . Print orientation should be on the side, might need a brim to stay on the buildplate. I added some foam to the stand to keep the IPad from…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
comme d'autre model de mon compte petit support Ikea skadis pour ébavureur pratique et rapide a faire
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Halterung für Shoks OPen Run und Ikea Skadis
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
A 90x90x28mm box mainly designed to hold my TI-84+ (or most graphing calculators) on my Ikea Skadis system.
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Takes about 5 XL Bernina Spools and is for the Skadis System. Print with some support, and I used a modifier to increase the strength and maybe the lifetime. I printed in simple PLA, Petg and abs etc. should also work.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
Blokada do pantografu (opuszczanego wieszaka do ubrań) GTV. Narysowałem, ponieważ w naszym urządzeniu pękł, a nie idzie kupić takiego elementu Lock for GTV pantograph (lowering clothes hanger). I drew it because it broke in our device,…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
support skadis Ikea pour petit tourne vis scalpel lame cutter pince boite
Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu
Used to hang anything that can be hung on a pushpin or screwhead on your Ikea Skadis.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu
This is a mount for holding a Molex Hand Crimp Tool on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports are…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A streamlined, snap‑in container perfectly sized for popular gamer supplement tubs, designed for IKEA SKÅDIS pegboards. Secure fit, easy print, and focused on showcasing your collection 🧩 Effortless installation: just snap into SKÅDIS…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sewing Thread and Bobbin Pin Holder for IKEA Skadis Adjusted to fit larger diameter but shorter bobbins used in PFAFF sewing machines, compatible with Pfaff 1469 1471 1472 1473 1475 1475CD 1520 Select 3.0 1069 6250 6270 Creative 2134
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
I couldn't find a good Benchy mount for Skadis that I could have a Swatch Card with, so I made one by combining a few designs. I liked the card design of Filament Swatch Remix by Yimir especially since it includes an editable file that I…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
This remix of the BenQ Halo ScreenBar Remote wall mount holder was remodeled in Onshape to work with the IKEA Skådis pegboard system using T-clips . It holds the remote base securely while still allowing the dial to be used, snugly enough…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
For Ikeas Skadis here is a small decorative Pin/Insert in a rainbow form, either the pride flag or the bisexual flag or any other three striped flag. Because I don’t have access to multiple colors of filament or a printer to use multiple…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Was looking for a holder to organize some paint tubes. This one ended up working out great. No glue needed, it fits snug inside the bin. Holds the tubes very well. I was even able to turn it a bit past 90 degrees vertical and the tubes…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
Big d6 dice holder for Ikea Skadis. Max length and width of dice: 27 mm. Supports: Yes, for Skadis attachment Filament: In my case Prusament PLA Vanilla white
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
support skadis pour ranger tous plein de petit matériel
Wydruk około 6,30 €–7,69 € nettoWstępna wycena jednego wariantu
Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…
Wydruk około 4,03 €–4,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a horizontal ring with an inner diameter of 18mm for mounting on the IKEA Skadis board. The included freecad file should be parametric enough to create any other sizes required. I use it to secure the end of a digital caliper, to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
During a heat wave this summer the original model fell off of my skadis board. So I designed a new version with separated and stronger hooks. You will need 2 hooks + the base mount. I printed it with PLA and 25% infill, which works…
Wydruk około 4,48 €–5,48 € nettoWstępna wycena jednego wariantu
Wanted to keep my LTT Bitcase organized next to my screwdriver so I designed this small holder for the IKEA Skadis wall. It should fit all sizes of the bitcase but I havent tried the smallest one for 12 bits but it should be enough…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Thanks to Just Joshi for this original part. The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. !!! Attention: You need a big printbed to print…
Wydruk około 12,27 €–14,99 € nettoWstępna wycena jednego wariantu
Klein Tools RT250 GFCI Outlet Tester with LCD Display mount for IKEA SKÅDIS. Supports required for the SKÅDIS pegs.
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
