Wyniki wyszukiwania: l0

Sortowanie

181 modeli

P
PrintablesBurfot

Toolshed TSL03 Midi Wood Lathe Tool Caddie

Basic Tool caddie to keep the bits that come with it, with it :-) Fits using the stock bolts (the ones that would mount the extension bed). Probably better to print in PETG if your garage gets hot, but PLA is what I had…

Pobrania
19
Polubienia
5
Ocena
0
P
PrintablesJones

Sól: OpenDTU (ESP32 / NRF24L01+) case

I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…

Pobrania
1351
Polubienia
70
Ocena
5
P
PrintablesOxmstr

VL53L0X

Top lid can be secured by M3 × 6 mm screws. The module itself holds onto the prongs and is pushed down by the lid, can also use soldering iron to spread the plastic around and secure the board. For soldered wires only, no connectors.

Pobrania
742
Polubienia
19
Ocena
5
P
Printablesw3rN42

Mesh covers for Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners

These are two mesh covers to replace the original side panels of the Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners. The original side panels are completely closed and the cooling relies on the two small intake fans at the bottom of the…

Pobrania
631
Polubienia
21
Ocena
5
P
PrintablesMartin_au

Wall mount for Makita DCL286/CL003

Wall mount for Makita DCL286/CL003. STL file is already set for best orientation. Use a tiny bit of support for the first few layers. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.

Pobrania
461
Polubienia
15
Ocena
5
P
Printablesfoorschtbar

Case for openDTU Ahoy Breakout Board (ESP32 and NRF24L01)

A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…

Pobrania
457
Polubienia
22
Ocena
5
P
Printablesandruala

ESP32 nrf24l01+pa+lna bluetooth jammer BLE

I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…

Pobrania
428
Polubienia
38
Ocena
3
P
Printablesdjos_1475

KFL08 compatible housing for 608 bearing

Remix to make the bearing captive and improve tolerances - the original version did not account for 3D printing tolerances. Category: 3D Printer Parts

Pobrania
410
Polubienia
27
Ocena
5
P
PrintablesMuhahahihilan

Makita CL003G Vacuum Wall Mount

The distance between the screw holes is 80 mm. Screws should be 3,5 - 4 mm in width. FreeCAD file is included for customization. According to comments it fits some 18 V models like the XLC11 as well. Print info Filament: Generic PLA…

Pobrania
401
Polubienia
51
Ocena
5
P
Printablesw3rN42

Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miner spacer for better cooling

This is a 180mm x 200mm x 35mm spacer that fits the Iceriver Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners. By lifting up the miner the two intake fans at the bottom improve airflow and the whole metal case has improved heat…

Pobrania
327
Polubienia
12
Ocena
5
P
Printablesw3rN42

Air duct for 120mm fan on Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners

This air duct for the Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners is designed for mounting an external 120mm fan to lower operating temperatures in devices that are significantly overclocked. To install, the side panel is…

Pobrania
302
Polubienia
15
Ocena
0
P
PrintablesEHY_3dp

Mikrotik L009/RB5009 10-inch rackmount

Requirements M4 x 10 screw * 4 M4 threaded insert * 4 You might need a long and thin screw driver for fastening device onto upper mounting hole.

Pobrania
286
Polubienia
28
Ocena
4,8
P
PrintablesAhmed Mohiuddin

nRF24L01 Mockup

This is a mockup of the nRF24L01 Radio Module.

Pobrania
252
Polubienia
8
Ocena
0
P
PrintablesPeluMan

Base termo Lumilagro T0376-L09U

SPA Base para termo marca Lumilagro modelo T0376-L09U Dimensiones: Øinterior 82 mm. Øexterior 87 mm. Altura: 23 mm. ENG Base for thermal bottle "Lumilagro" model: T0376-L09U Dimensions: internalØ 82 mm. externalØ 87 mm. Height: 23 mm.…

Pobrania
246
Polubienia
6
Ocena
0
P
PrintablesDeeDee

Universal Gl0ck frame holder for laser engraving

Suitable for all generations of Glock frames, AL V-profil 20x20, profile length 200mm V-Profil holder 90°degrees: https://www.printables.com/model/1224577-universal-glock-frame-holder-with-90deg-degrees V-Profil holder 22°degrees:…

Pobrania
242
Polubienia
45
Ocena
0
P
PrintablesSuperb Tech

RC Remote Controller 8 Channel using ESP32 and NRF24L01

8 channel RC Remote Controller with 2 joysticks, 2 switches, and 4 push buttons Communication via ESP-NOW protocol (compatible with any ESP32 receiver) Extended range mode using NRF24L01 module Built-in rechargeable battery with low…

Pobrania
220
Polubienia
57
Ocena
0
P
PrintablesMaster Yoda

NRF24L01 M5Stack Case

This is a NRF24L01 case to use it with the M5Stack Plus 2. I did the case but the unit i bought sadly does not work propertly.

Pobrania
192
Polubienia
36
Ocena
5
P
PrintablesKIL0

KIL0 StageTool

Here I share my version of the so called Riggers Multi Tool. None of the ones to buy suited my needed so I created a new one for 3D printing. The multi tool contains the following fittings: M10 butterfly nut M6 butterfly nut 22 mm nut…

Pobrania
182
Polubienia
34
Ocena
5
P
PrintablesOskar_diy

ToF enclosure VL53L0X - GAGGIUINO

As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…

Pobrania
177
Polubienia
11
Ocena
0
P
PrintablesSimon

Makita 7.2V BL0715 Battery Holder/Tester

I have a Makita TD022D impact driver, which comes with two 7.2V batteries. There is no battery meter on the driver or the batteries (unlike the bigger 18V batteries). I use this to store the spare battery and to test the charge level.…

Pobrania
175
Polubienia
15
Ocena
0
P
Printablescarp3-noctem

openDTU / Ahoy with ESP-32S and NRF24L01+ Housing

Pressfit Housing for openDTU / ahoyDTU Datalogger. Made this to the smallest factor that makes sense. Used following Components to build: ESP-32S (used one from this set) NRF24L01+ (used one from this set) 6EA of the smallest Jumper Cable…

Pobrania
164
Polubienia
7
Ocena
0
P
PrintablesKaosuNeko

DEKO battery body 20V BT20XL01

DEKO battery body 20V BT20XL01 Please don't print this! This is not a battery case. This is an overall model DEKO battery 20V BT20XL01 created for remixes. Expect the appearance of adapters and storage systems ) Original: BT20XL01…

Pobrania
163
Polubienia
10
Ocena
0
P
PrintablesRobbert Laugs

The Star Wars L0-LA59 (Lola)

lola the droid from OBI-Wan Kenobi Series printable in sperate parts for the right coulours. everything clicks togethers, apart from the wings and the hinge the white and red wing part needs to be glued, and the hinge to the wing. if you…

Pobrania
156
Polubienia
54
Ocena
5
P
Printablest0b1

Test bracket for VL53L0X module

Test bracket for the VL53L0X ToF IR module from AZ-Delivery. I ordered a bunch of them and needed quite some tolerances for a model that fits them all. This was primarily a test print to verify if I got the dimensions right. OpenSCAD file…

Pobrania
148
Polubienia
4
Ocena
0
P
PrintablesCarWalkerMail

Suzuki Swift 2010-2017 78132-68L01 Roof Cover (ZC32S / ZC72S)

Based on OEM 78132-68L01 roof rack cover. You can engrave anything on it in the slicer or just use Your favorite printing plate to give it a finish You want. For short use/cold countries: PETG Recommended: ASA (ABS if painted)

Pobrania
143
Polubienia
12
Ocena
5
P
PrintablesFORMAstudios

Lamp kit for Ikea Strala Cord Set - FORMAstudios L004

L004 Custom enclosure for the Ikea Strala Cord Set. Or comparable E14 Cord Set. IKEA STRALA CORD SET Designed with a focus on minimalism and functionality, this 3D model combines clean aesthetics with practical usability. Perfect for…

Pobrania
133
Polubienia
54
Ocena
5
P
PrintablesMartin_au

Wall mount for Makita DCL286/CL003 - Version 2.

Version two - much better fit and a bit stronger. Print with the angled side downwards and a small layer height. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.

Pobrania
133
Polubienia
10
Ocena
5
P
PrintablesBubTec

Bungee Goodman Handle for Wurkkos DL07 V3 (Scuba Diving Light)

Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…

Pobrania
132
Polubienia
34
Ocena
0
P
Printablesseekerbot

Box / case / housing for Wemos D1 mini and NRF24L01+ (for Ahoy project - Hoymiles solar inverter communication)

Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…

Pobrania
125
Polubienia
6
Ocena
0
P
Printables33K121
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
115
Polubienia
12
Ocena
2
P
PrintablesThor Sten

Iceriver case for KS0, AL0 and RXD with 120mm fan & mountable

You can mount the case on a wall or under a desk. Both sides are identical and can put together with the frame. The bracket can slide over the frame and also fits mit snap-in. Alternatively you can print the frame with rails for a voltage…

Pobrania
115
Polubienia
5
Ocena
0
P
PrintablesDorffMeister

Housing for VL53L0X Time-of-Flight (TOF) sensor

Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…

Pobrania
112
Polubienia
5
Ocena
0
P
PrintablesMrBlue

Hoymiles DTU für D1Mini + NRF24L01+

Ein kleines Gehäuse, passend für D1mini V2 (muss mit Heißkleber fixiert werden) und D1mini V3 (Kann mit 2x2mm Schrauben verschraubt werden). Zusätzlich kann man das NRF24L01+ Modul mit Heißkleber auf dem Block an der Seite fixieren.

Pobrania
112
Polubienia
9
Ocena
0
P
Printableskaiha

Remix of wasyl00 Quest 3 table tennis adapter

Update 12.12.23 - Add model A.1 and B.1, requested by a fellow, which adds 10mm of vertical space but maintains the same thickness as the original version. ---------------- I did this remix for 3 reasons. First, I want more space on the…

Pobrania
109
Polubienia
13
Ocena
5
P
PrintablesoXiVanisher

DIY JR Module Arduino and nrf24l01 for RC Taranis X9D

DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles

Pobrania
106
Polubienia
5
Ocena
0
P
PrintablesKaosuNeko

DEKO battery BT20XL01 (Makita BL18x0B compatible) wall holder

DEKO battery BT20XL01 20V wall holder Your printer must be calibrated. You will need support. This adapter is compatible with Makita batteries BL1850B, BL1840B, BL1830B and their analogues: DEKO BT20XL01 and 388VF. Original: BT20XL01…

Pobrania
106
Polubienia
16
Ocena
0
P
Printablesmanolis

Monitor Case For 10'' Netbook Screen (N101L6-L0D)

This is a portable monitor made out of a screen from a broken netbook and a driver board I bought from eBay a few years ago. Print instructions The model of the netbook screen I used was N101L6-L0D and the particular driver board that I…

Pobrania
105
Polubienia
20
Ocena
5
P
PrintablesRackOverflow

High-Strength Parametric Wall Mount for Magicubic L018

A robust, precision-engineered wall mount for the Magicubic L018 projector. This isn't just another bracket; it's a fully parametric model designed for extreme strength (using 5 wall perimeters), a clean "floating" aesthetic, and a 100%…

Pobrania
104
Polubienia
10
Ocena
0
P
Printablesezxzeng

clip for wasyl00v2.0 table tennis adapter

Made a clip to replace the screw for the wasyl00v2.0 table tennis adapter onshape document link in case the angle is different for your print. Just edit the variables as needed credit for the idea Edit: added a second version with bumps…

Pobrania
104
Polubienia
11
Ocena
5
P
PrintablesMW

OpenDTU Housing with 1,3 Zoll OLED, ESP32 NodeMCU and NRF24L01+

A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+

Pobrania
103
Polubienia
6
Ocena
0
P
PrintablesAtrica3D

NRF24L01 Flipper zero case

Following RJ019s method to build this module. Apparently i dont know left from right, so i accitentally built the module with the antenna on the “wrong” side, so to avoid me plugging it in wrong and blowing stuff up, i had to add the side…

Pobrania
103
Polubienia
19
Ocena
5
P
PrintablesOFreddy

Housing for TFT and ESP8266 with RF24L01

This is a Model for a specialzed housing for my project on github. https://github.com/OFreddy/wifi-tft-rf24L01 It is printed using Prusament PETG, needs no support with 0.2 mm layer height.

Pobrania
100
Polubienia
12
Ocena
0
P
PrintablesDeeDee

Universal Gl0ck frame holder with 90° degrees

Suitable for all generations of Glock frames, AL V-profil 20x20, profile length 200mm https://www.printables.com/model/779464-universal-glock-frame-holder-for-laser-engraving V-Profil holder 22°degrees:…

Pobrania
98
Polubienia
23
Ocena
0
P
Printablesw3rN42

Air duct for 120mm fan on Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0

This air duct for the Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 Miners is designed for mounting an external 120mm fan to lower operating temperatures in devices that are significantly overclocked. To install, just push the air duct…

Pobrania
96
Polubienia
9
Ocena
0
P
PrintablesDamian Mróz

GEPRC Cinelog 30 V3 GPS Matek M10Q & 3901-L0X

Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back. Important info about GPS! Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS. Can also hold DJI O4 Pro…

Pobrania
96
Polubienia
9
Ocena
0
P
PrintablesDeeDee

Universal Gl0ck frame holder with 22° degrees

Suitable for all generations of Glock frames, AL V-profil 20x20, profile length 200mm https://www.printables.com/model/779464-universal-glock-frame-holder-for-laser-engraving V-Profil holder 90°degrees:…

Pobrania
93
Polubienia
21
Ocena
0
P
PrintablesMcGr3g0r

VL53L0X TOF sensor

This is chassis for VL53L0X Time of Flight distance sensor for my INAV 6.1 based F450 type drone to use as range finder. Use M4 nut and screw DIN 912 type (imbus) to connect dist_bdy4_top with dist_bdy3_top. Parts dist_bdy1_bottom,…

Pobrania
92
Polubienia
4
Ocena
0
P
PrintablesJura Švébiš

The Witch King L0TR Wall Art

The Witch King L0TR Wall Art

Pobrania
85
Polubienia
22
Ocena
5
P
PrintablesMaking Changes

Ford F-150 (2009-2014) Upper Dash Mat/Tray 9L34-15044L06-A B

This is a replacement part for the upper dash mat in a Ford F-150 year 2009-2014. Part 9L34-15044L06-A B Seems the original deteriorates in the sun and the OEM part disintegrated during a simple vacuuming. Replacements are available but…

Pobrania
79
Polubienia
24
Ocena
0
P
Printablesexplorentinker

TB6612FNG Motor Driver and NRF24L01 Container

This is a combined container for both TB6612FNG and NRF24L01 for a more compact setup for the custom remote control receiver for RC. There are three (3) files in this 1) one with bottom opening for motor driver and normal NRF24L01 version…

Pobrania
79
Polubienia
0
Ocena
0
P
Printableszeroxx00

RAVEMEN CL01 go pro mount

I made an adapter to gopro for my bicycle light RAVEMEN.

Pobrania
77
Polubienia
4
Ocena
0
P
PrintablesSmeltie

Vl53l0x Separator

The Vl53l0x is what's known as a time of flight sensor. This sensor can measure a distance using a laser! However these sensor are well.. sensitive and can detect a transparent visor pretty easily. As it is usually not possible to place…

Pobrania
75
Polubienia
7
Ocena
0
P
Printablescarbo
Pobrania
75
Polubienia
3
Ocena
0
P
PrintablesblindMoe

25XL037 10mm bore timing belt pulley

TinkerCad Link: https://www.tinkercad.com/things/9NUnae6U8LJ I created this for use with the Rotary 4th axis for CNC. There are holes that can be tapped for M3 to tighten the timing gear down onto the 10mm shaft / bolt. I drilled a…

Pobrania
73
Polubienia
4
Ocena
0
P
PrintablesSalubra

NRF24L01 Flipper Zero case with led hole

Added a hole for led indication

Pobrania
71
Polubienia
12
Ocena
0
P
PrintablesPHabermehl

fischertechnik Distance Sensor GY-VL53L0XV2V case

A fischertechnik compatible case for the shown Distance Sensor Breakout GY-VL53L0XV2V Category: Construction Toys

Pobrania
70
Polubienia
2
Ocena
0
P
Printablesexplorentinker

NRF24L01 Containers

This is set of NRF24L01 containers that can be used to hold for integration with remote controls. Options: no inserts - can be used with glue support for 2.5mm inner diameter inserts with respective distances between holes as 24mm (width)…

Pobrania
68
Polubienia
6
Ocena
0
P
PrintablesYe_Sterday

VL53L0X Magnetic Enclosure for Gaggia Classic / Gaggiuino

If you want to use the cheap VL53L0X breakout board with your Gaggiuino as a water level sensor, here is an enclosure for it. Parts needed 2 disc magnets, 5 mm dia. x 2 mm ht. (same as for Scales Mod)…

Pobrania
68
Polubienia
13
Ocena
0
P
Printablesiddofroom

ESP32 + TOF Sensor (VL53L0X) Box

a small boxs that hold ESP32 with Time Of Flight sensor, with multi state buttons

Pobrania
67
Polubienia
4
Ocena
0
P
PrintablesTim

Case openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+

Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…

Pobrania
66
Polubienia
8
Ocena
0
P
Printablesbatteria_

Open DTU esp32-S3 NRF24L01+ case

Compact case for an esp32-s3 dev, NRF24L01+ with external antenna, no screw required. ESP and NRF24L01 must not have pin header soldered to fit inside the case, both usb-c ports are available.

Pobrania
65
Polubienia
4
Ocena
0
P
PrintablesPeter Farell

L0-LA59 or Lola

Remix of lo-La59 or Lola droid. Mandalorian Lola Droid (Homebrew) by stevem37 - Thingiverse

Pobrania
64
Polubienia
11
Ocena
0
P
Printableswinqooq

Front panel for "IS-IL03-IP5328-v1.2"

IS-IL03-IP5328-v1.2 - A power bank board that can be bought on the Internet and made into a power bank based on it. I only needed the front panel to repair the power bank. P.S.: Micro USB doesn't fit a bit - you'll have to cut it with a…

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesChee Yong

ESP32 C3 Mini OLED with nRF24L01

Simple enclosure for ESP32 C3 Mini OLED and x2 nRF24L01 wireless transceiver module. The hump on the top cover is meant for 10uF 50v or similar size capacitor that are soldered onto the VCC & GND of the nRF24L01 for stable performance.…

Pobrania
60
Polubienia
8
Ocena
0
P
Printablesfraggy

Case for Wemos D1 Mini and NRF24L01+

This is a simple housing for an AhoyDTU with unsoldered PINs. The Wemos D1 Mini and NRF24L01+ have to be pushed into the housing with a little pressure, then everything fits very tightly.

Pobrania
59
Polubienia
3
Ocena
0
P
PrintablesTony MaHoney

RingBot H4L0

I wanted to try out different types of mechanical joints. My goal was to make it fit around my finger. Of course, you can also use H4L0 without a finger. Perhaps H4L0 will adorn the finger of a chosen one in the near future. Who could say…

Pobrania
58
Polubienia
18
Ocena
5
P
PrintablesFelix Fischer

Z Lead screw top support (KFL08 flanged bearing mount) for Ender 3/v2/Pro

While it might not really be necessary on an Ender 3 to fix the z-screws at the top, I got the flanged bearings anyway when purchasing a second lead screw ( Amazon link ), so I wanted to at least put them to use. The bearing must be slid…

Pobrania
55
Polubienia
9
Ocena
5
P
PrintablesMilton Osorio

Matek Optical Flow & Lidar Sensor 3901-L0X 3901 PMW3901

Matek Optical Flow & Lidar Sensor 3901-L0X Housing (for FPV/INAV Drones) This is a custom housing designed for the Matek Optical Flow & Lidar Sensor 3901-L0X / PMW3901 module, created to mount securely under The Scout FPV drone (or any…

Pobrania
55
Polubienia
2
Ocena
0
P
Printablesltmirel

RC 1:16 with Arduino and NRF24L01

had a RC shell from the Nikko RC series and wanted control from Arduino used this model's steering design and mostly scaled the parts from 1:28 to 1:16 (175%) and did the necessary changes for a 1:16 scale model. use M3x10, M3x16 and…

Pobrania
55
Polubienia
10
Ocena
0
P
Printablesjoostama

Royal Enfield Himalayan Handlebar Bushing RAL00363

I ripped my bushings in a crash. now got new ones but decided to recreate them to have some spares on the bike when needed. RE part number RAL00363.

Pobrania
53
Polubienia
3
Ocena
5
P
PrintablesXpyct

Mikrotik RB5009/L009 45 degree stand

This is simple but usefull stand for Mikrotik RB5009/L009 routers which allows you to place your router anywhere above your height and be able to see all link LEDs and plug/unplug links. Also the plank there has a lot of holes for proper…

Pobrania
49
Polubienia
5
Ocena
0
P

L01 Lamp - Compatible with BambuLab light kits

Nifty lamp compatible with two BambuLab kits (you only need one): https://eu.store.bambulab.com/products/led-lamp-kit-001 → Wired, stronger https://eu.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights → Wireless,…

Pobrania
49
Polubienia
11
Ocena
0
P
PrintablesM. Tops

Xanes SFL02 Bicycle Light Mount

Xanes SFL02 Bicycle Light Mount https://www.banggood.com/XANES-SFL02-600LM-T6-Smart-Induction-Bicycle-Light-IPX4-USB-Rechargeable-80-Large-Flood-Light-p-1175110.html

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesLUC4R4T0R

Makita DCL286/CL003/XLC11/GLC03Z cordless vacuum wall mount with dedicated extension-tube holder

You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…

Pobrania
48
Polubienia
4
Ocena
0
P
Printablesleonek

iNap Malinka, your NRF24L01 transmitter that can play pokemon!

✨ Welcome to the iNap Malinka main page! ✨ iNap Malinka was mostly made as a decent Raspberry Pi based NRF24L01 transmitter. But as it turns out you can play some games on it as well! It's a small DIY handheld that runs RetroPie so any…

Pobrania
47
Polubienia
13
Ocena
0
P
PrintablesControforme

Portable 17" laptop display enclosure (HP DV7 N17306 -L02)

This is an enclosure for a 17" HP Pavillion DV7 (2011) Display. Display part number: N17306 -L02 IMPORTANT NOTE: The display can be rotated max to 30 degrees, after that the cable disconnects. I'm planning to work on a rev2 that supports…

Pobrania
43
Polubienia
19
Ocena
0
P
PrintablesEHY_3dp

Mikrotik L009/RB5009 cable guide tunnel

A cable guide tunnel which is compatible with Mikrotik L009/RB5009 with K-79 rackmount in high density environment.

Pobrania
42
Polubienia
6
Ocena
0
P
PrintablesRübenprint

Adapter Makita CL001G

Adapter for the click mechanism from the makita CL001G and all models with the same machanism. I think nearly all of them have the same mechanism.

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesHoge

Oil Tank Level Sensor Enclosure (ESP D1 Mini+ VL53L0XV2)

This 3D-printed enclosure is designed for an ESP module ( D1 Mini ) and a VL53L0XV2 time-of-flight sensor for monitoring the oil tank level of a heating system. The model is designed for an oil tank with a BSP G1 1/2 thread but can be…

Pobrania
41
Polubienia
2
Ocena
0
P

Audi Q7 (4L) Rear Door Sun Blind Clip / Hook – OEM 4L0861333

Replacement pull tab (clip/hook) for the rear door manual sunshade on the Audi Q7 (4L) . This model was created to replace the fragile factory part using precise measurements and 3D data. The design is based on a high-resolution 3D scan…

Pobrania
41
Polubienia
3
Ocena
5
P
PrintablesSpar-Fuchs24.de

Uncl0ggbuddy Sicherheitskappe

DEUTSCH: Hallo Füchse, wir hoffen, dass es euch allen gut geht und ihr euren Uncl0ggbuddy in vollen Zügen genießt! Wir haben eine STL-Datei erstellt, mit der ihr eurem Uncl0ggbuddy eine Sicherheitskappe verleihen könnt. Ihr könnt nun eure…

Pobrania
39
Polubienia
4
Ocena
0
P
PrintablesDimation

Clips for Nissan roof rails 738524cl0a-05

Clips for Nissan roof rails 738524cl0a-05

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesJorisFRST

Makita BL0715 battery wall mount

Makita BL0715 battery wall mount

Pobrania
38
Polubienia
3
Ocena
0
P
PrintablesMARK

HELL0WEEN PUMPKIN KEYCHAIN (TWO SIDE)

Keychain HELL0WEEN PUMPKIN

Pobrania
36
Polubienia
4
Ocena
5
P
PrintableswithanHdammit

QwiicBus I2C Extender endpoint with VL53L0X ToF

This is the case I designed for the QwiicBus I2C Extender endpoint with the VL53L0X Time of Flight (ToF) sensor. This was designed for the side distance sensor for ResinChem Tech's Parking Assist project. I built the original Parking…

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesWestblokker

Mikrotik L009/RB5009 10-inch rackmount with M3

I had M3 on hand so I remixed it to use that. Also made three versions 1. 1 HE, same as the orignal 2. 0.66 HE, to cover 2 squares 3. Tiny, is the same height as RB5009. This version is the on in the picture.

Pobrania
34
Polubienia
5
Ocena
5
P
PrintablesKevin Barker

Gridfinity Bins for Makita 7.2v Battery (BL0715)

BL0715 is perhaps the rarest Makita battery since it is only used in a couple screwdrivers (DF012D and TD022DSE) and a flashlight that appears to be only sold in Japan. I designed two bins, one for storing the battery vertically and one…

Pobrania
33
Polubienia
10
Ocena
0
P
Printablesmatthijsbos

Corner Mount for TOF200C-VL53L0X Sensor

Bracket for 45-degree mounting of TOF200C-VL53L0X TOF sensor in a corner. Sensor is held in place with a bit of glue. Onshape document:…

Pobrania
33
Polubienia
1
Ocena
0
P
PrintablesArpee

Mikrotik RB 5009 / l009 DIN mount bracket

Print it twice for every routerboard - needs M4x10 bolts - no nut needed. Its designed for RB 5009 or l009

Pobrania
33
Polubienia
6
Ocena
0
P
Printablesbenhoad

Hooli Gavin Belson Signature Edition Box 3 - Silverstone ML08 faceplate

For more infomation on the creation of it see my blog post. Added SVG for laser cutting logos - the one file has both cut-through and embossed versions of the signature and hooli logo; in my version i opted to has the hooli logo embossed…

Pobrania
30
Polubienia
17
Ocena
0
P
Printablestada66

Wall mount for Orico FL01-BK-BP USB hub

A simple two piece wall mount for the Orico FL01-BK-BP USB hub. One side goes over the cable and one over a USB port. Accommodates 4 6mm wide countersunk screws

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesJohn Pang

PL08N Inductive Probe Mount for Hero Me Gen 5

This model allows you to mount a PL08 Inductive Probe, to a Hero Me Gen 5 series Hotend suite.

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesMew

Project l0ckcr4ck3r

Was recently featured on hackaday . More information about the project can be found on my github .

Pobrania
29
Polubienia
8
Ocena
0
P
PrintablesTinkerbits

LEGO compatible GY-VL53L0XV2 Time of Flight Adapter

This adapter allows mounting the GY-VL53L0XV2 TOF Laser Distance Module to your own LEGO compatible models. Just snip the "ear" holes of the PCB before you insert the module into the printed adapter. Printing: PLA, 0.4mm nozzle, 2-3…

Pobrania
27
Polubienia
2
Ocena
0
P

Makita BL0715 battery replacement plastic cover

Replacement plastic cover for Makita BL0715 battery. The included STL files are pre-oriented for optimal print results. Supports are required for proper printing. I had adhesion issues with the lock_1 and lock_2 parts, so I recommend…

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesServError

IDS AL00037 Camera 1/4 inch adapter

Stand adapter for an IDS UI-3280CP Rev. 2 and possibly others to mount on any 1/4" thread platform.

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesJakub Koreň

Magcubic L018 Projector Lens Cap

A protective push-fit lens cap designed specifically for the Magcubic 650ANSI L018 Projector. It features a push-fit mechanism that grips both the inner and outer walls of the projector's plastic lens bezel. The bottom side includes a…

Pobrania
23
Polubienia
0
Ocena
0
P
Printablesruta

Front Rear Wheel Seat, C-Shaped Vehicle Seat RL022 Compatible: Raalro 1:14 Red Buggy/Truggy

it is a small model print 100 percent infill and high res I made this to print in metal through JLC3d because the original ones broke and were fragile

Pobrania
21
Polubienia
5
Ocena
0
P
Printablesmrog

Speed-Feed 400 adapters for Greenworks ST80L00 trimmer

I wanted a better head on my Greenworks ST80L00 trimmer. The problem is, the "universal" heads don't fit without some help. I bought a Speed-Feed 400 kit and figured out how to make it work. I printed the adapters using PETG with 100%…

Pobrania
21
Polubienia
1
Ocena
0