Wyniki wyszukiwania: lv

🤙 Aloha Shaka hand - Bike valve cap

Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…

🤘 Rock&Roll horns hand - bike valve cap

Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…

Schrader Valve Cap

I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…

Radiator valve adapter M28 > M30 + Pin Extension

For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…

Oversized Armchair for Sylvania Family and Calico Critters

Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.

Wolverine Skull

This is a cool model that I found on Sketchfab from RISD Nature Lab. Please follow print instructions: Keep the model in the orientation that it is set to for ideal print quality. If you don't use the print file, just add tree supports by…

Snap-On Label Holder for Wire Shelving Rack

I wanted to label the various spaces on my Heavy Duty Metal Storage Shelving Rack in my home office. I've designed it to nicely hold Avery 8860 labels (1 in. x 2 5/8 in.) so I can easily 2D print nice clear labels on my ink jet printer,…

Volvo Logo Keychain

I designed a simple Volvo logo keychain because i didnt find one that i liked. With this design it is possible to make a color change, so the Volvo sign is in a different color. Print with 100% infill. I designed it very big so just scale…

Wolverine claws for kids

My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…

Minnesota Timberwolves NBA Basketball Team Logo

Minnesota Timberwolves NBA Basketball Team Logo

Revolving cake stand for icing & serving 30cm (12 inch) capacity

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop 🏆 To celebrate the win I've added Low-Profile Legs that reduce the height 5cm! 🎆 It's Lazy Susan Mode!! 🍰 MMmmmmm This is purpose-built to make icing a breeze. Retaining rings…

Tire Position Valve Caps | Wheel Location Marker Caps

Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…

S Hook Clip for Wire Rack Shelving

I was tired of my other printed s hooks falling off my wire rack. These hug the wire rack a little tighter and therefore won't flop around as much when you go to hang stuff on 'em. the light duty works for hat weight items, heavy duty for…

Wasserhahn/ventil Knauf/Griff mit integrierter 7.7mm Rastbuchse / Faucet handle valve with integrated 7.7mm snap-in socket

Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…

V2 - 22mm One Way Flow Restriction Valve for Multiple Patient Lung Ventilation

With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…

Bullet Valve Cap

Take a look at Shrek Valve Cap ! --------------------------------- Good looking valve cap for your bike made for Schrader type valve = most common --------------------------------------------- Print : 0.15mm NO Supports PLA, PETG, ABS…..

Endless Collection "Salvation"

In the shadow of a rugged hill, under a sky heavy with foreboding, stands the cross—a stark symbol of sacrifice and redemption. Upon it, Jesus Christ, a figure of peace and suffering, embodies the ultimate act of love and forgiveness. His…

Funnel for Tubeless sealant (or inner tube) (presta valve)

To fill inner tube you must remove valve core.

Schrader Valve Paddleboard Adapter

This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…

Starship Valve Cap

Starship shaped valve cap for Schrader and Presta valve types

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Moai Presta valve cap

Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta

HDX Heavy Duty Shelving Foot and Cap

This is feet and caps for the storage units that Home Depot sells, the HDX Heavy Duty ones. See pictures, this fits the 18 and 24" versions of this same shelving. I used these storage units in a place where I could only use 3 of the…

Table and Chairs for Sylvania Family Critters

A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them. Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit…

Revolver II, DeSteiner: double-action-path, a way to print it more sturdier, for a long life!

The small nipple on the “double-action-path” was broken three times. I tried to print it 45 degrees for a better layer adhesion , I've added supports, which you have to remove after printing. It works great, even with PLA! Print it with…

👷‍♂️ Lego man - Bike valve cap

Info: another model for valve cap - Lego man this time Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB valve), so just print this at 100% scale or adjust slightly. body 3mf file contains variable layer…

Cup holder for Volvo XC60

After having had several incidents where my aluminum can fell while braking, I decided to design an improved cup holder. It's made to accept standard aluminum cans as well as cardboard cups at least up to large (approximately 500 mL).…

schuifmaat klepje, battery caliper cover, soupape à étrier coulissant, válvula de pinza deslizante.

Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.

Shrek Valve Cap

Take a look at Bullet Valve Cap! Shrek Valve Cap made for Schrader type valve = most common Print : 0.15mm No Supports needed PLA, PETG, ABS…..

6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas

6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas

Parametric Mini Shelves

Get your bathroom cabinet organized with these parametric shelves! Ideal to optimize small cabinets where vertical space is not well utilized. Included you'll find 4 predefined sizes: small (15x5x8cm) large (20x8x12cm) large with tall…

RockShox Valve Cap

Valve Cap for RockShox bike suspension fork and similar. Thread is M8x0.75 Suitable for RockShox Lockout Knob and RockShox Lockout Fix Cap

Werewolve Skull with Stand / Werwolf Schädel mit Standfuss

Model of a werewolf skull to decorate, optionally with a stand, if not desired simply leave it out. printed with Prusa MK04 and Bambu A1 mini PLA supports: yes organic / only on plate Modell eines Werwolfschädels zum dekorieren, wahlweise…

Volvo V50 S40 C30 MagSafe Vent Mount Phone

Designed for MagSafe with USB-C plug (Apple MHXH3ZM/A) Designed specifically for the Volvo C30, S40, and V50. My 3D printed MagSafe vent mount offers a perfect blend of form and function. Engineered for MagSafe technology, your iPhone 12…

Modular Shelving Unit

You can use this systems components to design shelving to suit your needs. There are only four easily 3d printed modules in this system that are repeated. These prints are combined with standard 35mm diameter wooden curtain rods, 20mm…

Dowel Style Modular Shelving Furniture

Note: My printer is currently being repaired, therefore this design has not been tested, for the moment. However, it has been designed with printing accuracy in mind in regards to fits. A modular furniture system using dowels as support…

Repuesto llave válvula llenado agua caldera vaillant

Repuesto llave válvula llenado agua caldera vaillant parte de la llave de plástico que siempre parte con el tiempo. Impreso PETG con 3 perímetros , 60% relleno. Soportes solo en la base, Altura de capa 0.2

Keyhole Storage Shelving Hook

Keyhole Storage Shelving Hook PLA with 50% infill (I'm sure you could use PETG for more Strength but this is pretty sturdy with PLA.)

2-way ventilator splitter with integraged valve mounts & flow restrictor

Something designed, hopefully never to be used. Having tried out a few methods to split ventilation from one ventilator to multiple test lungs, this is my latest solution. It is designed to be simple and fast to print. The splitter has…

HOOD NOISE INSULATION CLIP FOR VOLVO CX70

Hood noise insulation clip for VOLVO CX70. The representative of the wonderful Swedish car industry is crumbling before our eyes. Several clips attaching the trim to the hood just fell apart in my hands. This time I'm saving the…

Bose Companion 2 Speaker Wall Shelf / Shelves - Versions 2-4

Version 1 of these shelves (https://www.printables.com/model/134832-bose-companion-2-speaker-wall-shelf-shelves) has shorter sides such that the cantilever dips 1-1.5mm. They hold up for at least 10 months in service but I wanted to make…

Scuba cylinder DIN valve screw cap

Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…

"Project Source" Steel Heavy Duty Shelving Cap

Replace the non-functional shelf caps with this 3D printed tight fitting one. This is for the Project Source shelves. These shelves come with a clear plastic cap, but they do not stay in place. Remove them and replace with this cap which…

Closetmaid Super Slider for generic shelving

This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving. Print instructions Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance. Link to source OnShape…

Wire Shelving Hook

I designed this after dealing with the standard wire shelving hooks that would break off with a small amount of force over time. The hook is intended to be used in place of the standard shelf hook/wall anchor. It has the same offset…

bouchon valve d'oxygénation INTEX_Air Jet Valve Cap

bouchon de valve pour système d'oxygénation d'air INTEX, ce bouchon permet de stopper la production de bulles. ce visse à la place de la valve. Air Jet Valve Cap for INTEX air oxygenation system, this cap allows to stop the bubble…

Prusarduino Nano - Fire Safety System for 3D Printers (evolved)

Hello friends! My overall philosophy here was to create a fire safety system that could be set up easily by anybody, with no programing, arduino, or soldering skills required. Everything is plug & play here. You just have to print the…

Skadis Bose Soundlink Revolve Speaker holder

Ikea Skadis holder for Bose Soundlink Revolve Speaker

Heavy Duty Hook for Garage Shelving

I use a lot of 'hammerlock' style shelving in my garage. It's the sort that is assembled using a hammer to attach shelving rails to pre-punched uprights. They are a common product in Bunnings (an Australian hardware chain). I had been…

Circumvolving Dice Case w/ Hidden Magnetic Dual Latch

A curvy eye-catching case with a rotating top that uses hidden magnets to loosely lock the top in place in both an “open” and “closed” position. The three compartments are sized to conveniently fit the standard 7 dice often used in DnD…

Danfoss Ally thermostat adapter to Oventrop valve M30x1

Print instructions Print with 0,1 mm layer height for sufficient thread quality. Fillament PETG or ASA. 4 outer perimeters. Supports needed. Use cylinder support enforcer with diameter 27 mm. The support must not touch the internal thread…

Heart Valve Stem Cap

Heart shaped Shrader valve stem dust cap. The included Gcode file prints at just the right size on my Artillery Genius Pro, but your experience may vary.

Volvo XC60 Samsung tablet stand

I made this model for a samsung tablet (10") to fit in a Volvo XC60 car. Support needed. See my gcode for angles an support inspiration. It works ok without editing or damaging any panels in the car. Easy to put and remove.

Stream Deck Module (32 Keys) Housing for DaVinci Resolve Mini Panel

This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…

🏴 Flag - Bike/car valve cap

Info: another model for valve cap - for schrader valve (the type used in cars) changing colors via color change (no MMU needed) for flags with horizontal stripes vertical stripes ❗ Not for presta valve! Print instructions: 0.4mm nozzle…

Citadel paint/model shelve unit

Paint stand This is my own design from scratch but I would like to first credit @jonnyboy_star_535044 on Printables for inspiration. This is designed to print on a 220x220mm print bed, without supports. I have made the joins quite loose…

Volvo Key - V40/S40 I (1995+)

It's a replacement for (in my case broken) car key body. Coloring Just stop the print after 4.4mm printing height and change the filament for the next 0.4mm. before changing back to the initial color for the last 0.3mm. I attached a 3mf…

shelf hoook/bracket for the outside of metal shelving frames

printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…

1965 Tonka Toys Police Jeep #325 and 1962 Elvis Surrey Jeep #350 Striped Hardtop Roof

My friend collects old Tonka Toy Vehicles. In 1965, Tonka make a police jeep #325 with a black & white striped hardtop roof. In 1962, they made a #350 Pink& White Surrey Jeep. There is also a green roof from the Vintage 1965 Tonka Jeep…

Valve Index front cable guide

WARNING: Tilting could still cause strain close to the connector in front of the facial interface.

Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia)

Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia pipes) This is a remix of… https://www.thingiverse.com/christhorn/designs just added a mount for the plastic shelves…

Jabra Evolve 65e Buttonplate

Credit: Thanks to Lorenzo (@laurent.polese) from MakerWorld for sharing the original design. Modifications made to the original: Printed using a 0.25 mm nozzle for higher detail Buttons scaled to 92% on X and Y axes Buttons scaled to…

Presta tubeless valve pair holder

As seen on Instagram - hold two tubeless valve bodies or valve extenders together so they don't get separated in storage. Three versions for various printers: Prusa MK3S sliced at 0.300mm layer height with PrusaSlicer - 1.13mm wall…

Prusa MK4 Z-axis mounts for IKEA SKYDRAG/SILVERGLANS light bar

Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…

Hood with solvent trap for Rheometer

This hood is designed as a solvent trap for samples being tested on Anton Paar rheometers that have volatile solvents. The design has been tested successfully and provides sample stability for at least 24 h. Note: Please remember to seal…

SILVERCREST handheld vacuum pump adaptor for ZWILLING vacuum storage products

I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…

Rackmount ELV Charly Homematic CCU

for english description see below. Deutsch 19 Zoll Gehäuse für ELV Charly. Was ist ELV Charly? ELV Charly ist ein Raspberry Pi (3B) kombiniert mit einem Homematic Funk-Modul RPI-RF-MOD (die selbe Hardware wie in einer Homematic CCU3). ELV…

98mm Exhaust Elbow w/Backflow Valve and Flange

This version of the 98mm elbow includes a backflow valve, flange coupler band and lock. These files include proper settings to print as they are. No tools necessary. Printed with PLA on a Prusa MK3S+ with a .4mm nozzle and .3mm resolution.

Volvo XC60 Center Console Storage Divider

Simple organizer to fit inside the 2015 Volvo XC60 armrest storage compartment. Without this everything I needed to access quickly was piled on top of each other. Now I keep the following items in this compartment: Notepad, pen (clipped…

Small Square Tool 3cm x 4cm with silver ratio

I printed with PLA, 0.2mm height and 25% gyroid infill. If you want more precise square you could do some precise sanding. Holes B-D form silver ratio Θ*10mm=~24.14 A-B is Θ/2 The silver ratio is Θ = 2.414213… = 1 + sqrt(2) It derives…

Llavero del Mapa de El Salvador PLA+ HD

Este llavero, diseñado con la silueta del mapa de El Salvador , es un detalle especial que celebra la belleza y riqueza de nuestro país. Impreso en 3D con PLA de alta calidad , destaca por sus detalles precisos y un acabado suave y…

Wolverine - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x154.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Revolver Stand for 7in revolver

It's a simple build. Use supports and at least 30% infill to ensure the integrity of the structure. Keep in a safe place. This is a presentation stand for a secure area. Don't print this and expect it to keep your revolver secure.

Hobbes (from Calvin and Hobbes, a newspaper comic strip)

A three colour keyring and fridge plate featuring Hobbes from Calvin and Hobbes. I've included the colour change .gcode created in Prusaslicer as well as the .stl

Valve Index base station door adapter

Adapter for fixing the valve index base to a door without leaving a mark. Available in vertical and horizontal versions. This attachment is suitable for both thick and thin doors. To fix the base you need 2 M4*8 and 2 M4 nut. I used PETG…

Prusa MK4/3 rear light bracket for IKEA Skydrag/Silverglans

Bracket for an additional light bar behind the frame which doesn't interfere with the original spool holder. Works with both IKEA Skydrag and Silverglans. Both are powered by 24V so theoretically can be powered by the MK4 power supply…

Werwölfe vom Düsterwald Sethalter Kartenhalter / Werewolves

Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen

Andrew Melville Hall of Residence James Stirling 1:500

case study model i made as an architecture student

Part of the Ukrainian city of Lviv(center)

3D model of the Ukrainian city of Lviv Model created in Blender using the BlenderGIS addon. This model was designed for printing with a 0.4 mm nozzle and 0.2 mm layer height. Size - 100 x 100 x 8 mm

Distinguishing tire valve caps

My print reccomended tips: 3 perimeters, 100 % infill ASA or PETG 0,1-0,15 mm layer height (important for the thread printing) fuzzy skin on outside walls (for the rougher cap surface) 0,4 mm nozzle use a brim no support needed For the…

Variable height fridge door shelve adapter for Siemens KG49E4ICA

This is a variable height fridge door schelve adapter that I designed for my Siemens KG49E4ICA fridge, but I guess this can be used with other Siemens fridges as well. I designed this because the predefined schelve mount positions were…

Cutlery Silverware Holder

This model is a great way to organize all of your silverware items!

Sous Vide bracket - Silver Crest SSVS 1000 B2

[EN] Replacement bracket for the Silver Crest SSVS 1000 B2 sous vide cooker from Lidl. The holder on my cooker broke, so I made a new one. I used the spring and lever from the original holder, which were undamaged. Print Material ABS /…

Micromatic valve Protective cover

I created a protective cover for the CO2 control valve for my CO2 pressure bottle, which I use for tapping beer, which can be easily inserted and removed from the pressure gauge. They are nicely hidden to avoid damage. I printed from PLA…

Cupholder adaptor for Volvo FE (Updated to V2)

Pressure fitted adaptor for Volvo fE central console cup holder. I drink from 0,33 (slim) and 0,25 litre cans at work, and those won't stay upright in the original cupholder, so I made adaptor for it. V1 Doesn't fit regular (fat) 0,33 or…

Simple and resistant adjustable shelves or tables

A year ago I tried to make some adjustable shelves and got into all sorts of complicated designs but in the end, the simplest design was the better. So, with just 3 small STL's(A1, A2 and B) and some wood you can make some really good…

Vornado Silver Swan oscillator turning axle

I printed with PETG at 0.15mm layer height. I used 100% infill and turned on “bobstro's supports," which are saved in the .3mf file. The tall end of the axle attaches to the large plastic gear with a screw. The other shorter end rests…

Part of the Ukrainian city of Lviv(Lviv Polytechnic University)

3D model of the Ukrainian city of Lviv Model created in Blender using the BlenderGIS addon. This model was designed for printing with a 0.4 mm nozzle and 0.2 mm layer height. Size - 100 x 100 x 8 mm

Achsen-Haltestifte / Rods for "Spulvorrichtung für Filamentrollen"

EN: In the very simple and usable model of a filament spooler from 3D-Kalle, there are holes for attaching a pin to secure the shafts, but no pins are designed. Of course you could use a nail or pin, but metal is more slippery and…

display stand label with two colours for DeSteiner Revolver II

Calvary Cross

Description: The monastic Calvary Cross , in which the cross is situated atop the hill of Calvary , its slopes symbolized by steps. To the viewer's left is the Holy Lance , with which Jesus was wounded in his side, and to the right, the…

Knob, Valve, Hose Quick Disconnect

Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…

salvadanaio hot

Rails for IKEA OMAR shelves.

The one negative thing with IKEA OMAR is that the back and sides are open. This is the solution. What you need: M3 nuts and bolts, 2-4 per clamp. Enough 10mm rods / pipes / … for the sides you want to put rails on. I used 10 mm aluminum…

Quick release cable / Schnellverschlussverbindung

Quick release cable, IDC Connectors holder Post connector for 26 Pin. Schnellverschlussverbindung, IDC-Steckerhalter, Pfostenstecker für 26 Pin Die awh 24g-e202-idc 24 Pin steckerleiste sind schwer zu bekommen darum bau ich sie aus 26 Pin…

Slider for Mopar 3748 429, Parking brake vacuum release valve

Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…

Douk Audio U10 Mini Tube HeadAmp Valve Shield

The Douk Audio U10 Mini Tube Headphone Amplifier comes with a perspex shield which I don't like. So I made this instead which when printed in eSUN Copper PLA+ I think looks better.

Atlas SLV-3C Centaur-D and Pioneer 12+13

I made this a year ago, and I let my science teacher keep the model, so I do not have the weight or time taken for each model (i forgot how long each piece took, but the whole thing took about 5-6 hours to design, and 8-9 to print so all…