Wyniki wyszukiwania: odu

Sortowanie

17 617 modeli

P
PrintablesLR3DUK

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Pobrania
48 021
Polubienia
19 527
Ocena
4,83
P
Printablesblove

Modular Hydroponic Tower

Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…

Pobrania
24 636
Polubienia
4184
Ocena
4,89
P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Pobrania
22 705
Polubienia
5392
Ocena
4,92
P
Printablesfivesixzero

Case for Flipper Zero Wi-Fi Module v1

Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…

Pobrania
18 167
Polubienia
1126
Ocena
4,93
P
PrintablesMario

Hexabox (modular and interlocking storage system)

This is a remix of "The HIVE" from Thingiverse. I printed out "The HIVE" but the connection was too loose for me. For this reason, I created a new model with 0,2mm tolerance and add different sizes and inserts. Print instructions 0,3 mm…

Pobrania
11 989
Polubienia
7434
Ocena
4,82
P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Pobrania
8814
Polubienia
4733
Ocena
4,89
P
Printableshein

Desk Clamp (Modular)

A modular desk clamp. Was inspired by the flash contest to finally do this idea. I was constantly changing the layout of the room and finding, that I need to print “another headphone holder” etc. because I wanted it on the other desk or…

Pobrania
7599
Polubienia
1568
Ocena
4,92
P
PrintablesBeef_Salad84

Small fully-printable modular Vermicomposter

Hello I made this model to promote sustainability and to prove that you can live more ecologically even in a small flat or without fancy equipment. It's a Vermicomposter/normal-composter printable on a Prusa i3 with a maximum size in…

Pobrania
4046
Polubienia
1753
Ocena
4,76
P
PrintablesDaniel Vitanza

Modular Hoses (Loc-line like)

Description Loc-line hoses are industrial flexible hoses used in manufacturing machine to provide the coolant accurately on the part and the tool during operations. But those kind of hoses can also be used as very useful helping hands to…

Pobrania
3493
Polubienia
626
Ocena
4,86
P
PrintablesRxR

Modular Dice Tower Castle Stairs

"Building a tower is an art. Building the tallest tower is a masterpiece! Take it from a wisard." - Saruman the White - Here's a remix of the fabulous "Dice Tower Castle Stairs" by Squinn , for players who want to touch the sky (or for…

Pobrania
3111
Polubienia
792
Ocena
4,87
P
PrintablesTechromancer

Modular Dice Tower

Modular Dice Tower Print instructions .1 Layer height, 35mm/s. Filament PM Galaxy Silver. 65+ hours

Pobrania
2823
Polubienia
478
Ocena
4,81
P
PrintablesE3D

Revo Connect ~ A modular system for storing Revo nozzles

MODEL DETAILS Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile. Size Information: Each Revo Nozzle is engraved with its size. It can be found…

Pobrania
2693
Polubienia
351
Ocena
4,86
P
PrintablesOut Of Marbles

Bucket Lift - Modular Marble Machine - Motorized

We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…

Pobrania
2346
Polubienia
582
Ocena
4,96
P
PrintablesViermalbe

Gridfinity Modular Drawer Remix

A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…

Pobrania
2012
Polubienia
535
Ocena
5
P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Pobrania
1976
Polubienia
237
Ocena
4,6
P
PrintablesDaveDude

Balcony Strawberry Tower with IKEA Persillade Modular Hydroponic

Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…

Pobrania
1760
Polubienia
497
Ocena
4,75
P
PrintablesOut Of Marbles

Twister - Modular Marble Machine

We are soon launching a KICKSTARTER ! You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts yourself. While we ship the critical parts, you will 3D print the rest of the…

Pobrania
1571
Polubienia
202
Ocena
5
P
PrintablesWingedFuse

Case for Flipper Zero Wi-Fi Module with Ruthex threaded inserts + Marauder skull logo version

This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…

Pobrania
1558
Polubienia
162
Ocena
4,79
P
PrintablesJorge

Modular Storage Tree

Introduction This organizer was designed with those, like me, who have limited space. It's a highly versatile and elegant system that allows for the storage of a wide variety of items. Not just for 3D printers, it can be used to store:…

Pobrania
1550
Polubienia
980
Ocena
5
P
PrintablesOut Of Marbles

Triple Twister - Module

We are soon launching a KICKSTARTER ! This is an interchangeable module that fits on all of our marble machines that take modules. The rest of the modules are available on our website . Sneak peek of the rest of our modules that fit on…

Pobrania
1483
Polubienia
120
Ocena
4,87
P
Printablesvaxxi

Modular trellis system for climbing plants

I liked the idea behind this model , but wanted a more sturdy construction that did not involve glue (am not a patient man). So, with a bit of Fusion 360 work, here's this nice trellis that can grow as needed. No glue required, but pieces…

Pobrania
1462
Polubienia
387
Ocena
5
P
PrintableseSeL

Fingerboard Skatepark Modular - Ramps, Rail and Stairs

Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…

Pobrania
1416
Polubienia
342
Ocena
4,75
P
Printablesberk

Modular Wine Rack

This design is inspired by the GustaVino wine rack that you can read more about at http://www.gustavino.co.uk/. After having purchased this design, I was not satisfied with a number of elements: The print quality was poor due to the need…

Pobrania
1269
Polubienia
225
Ocena
4,92
P
PrintablesMike

Slotty Modular Storage System

Slotty is a modular storage system. All components slot together to create a modular storage system to suit every need. A modern design fit for your workshop/kitchen/living room/office space. Print as many as you need and in any colour…

Pobrania
1267
Polubienia
396
Ocena
5
P
PrintablesAUGU5TO

Modular Gravity Tool Holder – Adjustable, Reinforced & T-Nut Mountable (Remix)

Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…

Pobrania
1208
Polubienia
1006
Ocena
4,75
P
Printablessternli27

Makita 18V Battery Connector Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…

Pobrania
1086
Polubienia
109
Ocena
5
P
PrintablesKatarn

Modulcaster - Les Paul - a modular 3D-printed guitar with swappable styles

Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…

Pobrania
1080
Polubienia
477
Ocena
4,67
P
PrintablesDominik

Christmas tree - modular

Looks good with 1 or 5 levels. 5% infill is enough. Buy me a coffee

Pobrania
1040
Polubienia
162
Ocena
5
P
PrintablesConr8r

Modular Herb Dryer\Dehydrator

Description This is a modular herb dryer/dehydrator with stackable shelves and sliding trays. This dryer uses passive airflow to dry out herbs gradually and doesn't require a heat source or electricity. Instructions Printing This is a…

Pobrania
1034
Polubienia
614
Ocena
4,58
P
PrintablesEd

TRX4M Modular track part 1

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
1018
Polubienia
117
Ocena
4,89
P
Printablesmhparsons

Modular Wine Rack

This is a modular wine rack system that can be assembled to create many different configurations. I have included a number of different configurations in the photos section, but don't let that constrain you. This system can be expanded…

Pobrania
965
Polubienia
590
Ocena
4,86
P

Low-Poly Koenigsegg Jesko Absolut - Modular Cars

Low-Poly model of a 2024 Koenigsegg Jesko Absolut. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This record breaking…

Pobrania
928
Polubienia
97
Ocena
5
P

Low-Poly Dodge Challenger SRT Hellcat - Modular Cars

Low-Poly model of a 2022 Dodge Challenger SRT Hellcat. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This iconic…

Pobrania
922
Polubienia
148
Ocena
5
P
PrintablesEd

TRX4M Modular track part 2

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
903
Polubienia
119
Ocena
5
P
PrintablesEd

TRX4M Modular track part 4

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
844
Polubienia
108
Ocena
5
P
PrintablesSteveT

Modular Wine Rack

NOTE: Step files now uploaded This is a very strong and stable wine rack that can be made to hold as many bottles of wine you require. Start off with a small rack and then add to it at any stage as your wine collection grows (if you don't…

Pobrania
832
Polubienia
197
Ocena
5
P
PrintablesTiago Jesus

Case (with inserts) for Flipper Zero Wi-Fi Module

I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…

Pobrania
830
Polubienia
80
Ocena
4,92
P
PrintablesTWB

Modular Traffic/Construction Cone (Tabletop Miniatures)

Modular design, you can achieve various sizes and functions by swapping different components - with more additional parts to be introduced later. Suggested print settings (for Prusa machines, others may need some tweaking): Layer height…

Pobrania
825
Polubienia
421
Ocena
4,83
P
PrintablesSeppo

Smartphone Stand tripod Stativ Modular Mounting System

This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…

Pobrania
815
Polubienia
105
Ocena
4,8
P
PrintablesNautilus Forge

Modular filament spool rack - reversible shelf bracket

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Pobrania
802
Polubienia
135
Ocena
4,8
P
PrintablesJakub Kříž

Modular 19" Rack Case for Musical Gear

Modular 19" Rack Case This modular rack case is the perfect solution for storing and organizing your musical gear. It can hold up to four independent modules (4U), and multiple cases can be stacked together and reinforced with steel…

Pobrania
801
Polubienia
201
Ocena
5
P
PrintablesEd

TRX4M Modular track part 5

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Use the rings to space out the planks on a rope between the two ends. You can use two…

Pobrania
795
Polubienia
124
Ocena
5
P
PrintablesRafael Dona

SpoolGrid — Modular Drawer System for Prusament Spools

SpoolGrid is a modular drawer organizer designed to give a second life to empty Prusament spools . Instead of throwing away or storing empty filament spools, SpoolGrid transforms the spool into a compact circular storage system. The…

Pobrania
753
Polubienia
484
Ocena
4,67
P
PrintablesEd

TRX4M Modular track part 12

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill Support is needed. Watch it in action at

Pobrania
751
Polubienia
118
Ocena
5
P
PrintablesEd

TRX4M Modular track part 6

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. All 3 parts can be connected using the 3 way connector These corner parts are not…

Pobrania
736
Polubienia
99
Ocena
5
P
PrintablesTank 3D

Minecraft Sword (From: A Minceraft Movie 2025) | Modular!

Here is a modular version, finally! I do apologize for the timing on this, as I barely finished designing the connections to work. (In context, I was toiling with 232 parts that won't merge) Printing Use organic supports to make your life…

Pobrania
732
Polubienia
66
Ocena
5
P
PrintablesEd

TRX4M Modular track part 9

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
677
Polubienia
91
Ocena
5
P

Low-Poly Porsche 911 Turbo - Modular Cars

Low-Poly model of a 1974 Porsche 911 Turbo 930. Included are functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This classic German sports car is at roughly 1:25 scale. Tolerances may…

Pobrania
673
Polubienia
106
Ocena
5
P
PrintablesJordi

Modular 10 inch rack 2U ITX case + storage mount

I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds. I…

Pobrania
660
Polubienia
173
Ocena
5
P
PrintablesEd

TRX4M Modular track part 11

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill Support is needed. Watch it in action at

Pobrania
644
Polubienia
102
Ocena
5
P
PrintablesEd

TRX4M Modular track part 10

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
614
Polubienia
80
Ocena
5
P
PrintablesEd

TRX4M Modular track part 7

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
606
Polubienia
86
Ocena
5
P
PrintablesEd

TRX4M Modular track part 3

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
562
Polubienia
78
Ocena
5
P
Printablesvandragon_de

CAS - the modular xyz-cube cargo ship

Like many of you I also have a lot of the great xyz cubes lying around. What do you do with it? My idea was CAS my xyz-cube cargo ship. Since I have, as already written, many cubes, I still had the idea of a modular transport ship. Get…

Pobrania
553
Polubienia
103
Ocena
5
P
PrintablesEd

TRX4M Modular track part 8

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Pobrania
549
Polubienia
74
Ocena
4,67
P
PrintablesMetikumi

The Modular Lantern Frame, Lid, Pole and Foundation - Low Poly Design

This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…

Pobrania
497
Polubienia
144
Ocena
5
P
Printablesemisticg

Modular Moss Pole for Climbing Plants (Modułowy palik do mchu dla roślin pnących)

PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…

Pobrania
496
Polubienia
109
Ocena
5
P
PrintablesJERRY

Recreation for the Tonie HIVE - Modular Hex Shelf for Toniebox

Recreated the Model because its original fit was very loose with 0.5mm clearance per side. I tighten up the clearance to 0.1mm per side for a very nice selfholding fit.

Pobrania
479
Polubienia
55
Ocena
0
P
PrintablesStabbyMc

Modular 4Runner (Gen5) Center Console Organizer

This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…

Pobrania
457
Polubienia
47
Ocena
0
P
PrintablesSB

H0 Scale Jersey Concrete Barrier – Modular Road & Construction Barrier for Model Railways

The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…

Pobrania
434
Polubienia
48
Ocena
5
P
PrintablesRuckie

Prusament Hydro-Tower: Modular Planter

Give Your Empty Spools a Second Life! Repurpose your empty NEW Prusament spools into a space-saving, fully 3D-printable vertical garden! Ideal for growing fresh herbs or succulents indoors. Devlog…

Pobrania
406
Polubienia
524
Ocena
5
P
PrintablesEgon
Pobrania
394
Polubienia
38
Ocena
5
P
PrintablesSveinar

Raspberry Pi Compute Module 4 IO Board Enclosure

I tried to print this once and it didn't quite fit. I gave the card some extra space and organized the code a bit. Hope You didn't try the last version. Parting the model and turning the lid over in PrusaSlicer works well for me.

Pobrania
380
Polubienia
17
Ocena
0
P
Printablescsweichel

Modular Wallet: Slimfast Edition

Adds an Apple AirTag and space for cash, without adding much in thickness (4mm for the AirTag, nothing for the cash). This remix adds space for an AirTag on the top plate, uses some of the thickness of the bottom plate to add space to…

Pobrania
379
Polubienia
69
Ocena
5

Moss pole / climbing aid (modular)

You can stack up multiple modules on top of the ground anchor and optionally add moss inside the modules for plants which need the moisture. I recommend to print in PETG. The module should be printed with the detents up or with brim…

Pobrania
373
Polubienia
80
Ocena
4
P
PrintablesOBA

H0 modular Concrete Bridge Pillar System pluggable / H0 modulares Beton-Brückenpfeiler Stecksystem

Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…

Pobrania
372
Polubienia
47
Ocena
0
P
PrintablesMarkus

Modular enclosure compatible w/ CM4-NANO-B Base Board for Raspberry Pi Compute Module 4

WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…

Pobrania
371
Polubienia
15
Ocena
5
P
PrintablesJacob

Modular Bit Holder - LTT Store Screwdriver

The LTT Store screwdriver is fantastic. However, the extra bit storage is not. This modular bit holder is the perfect companion to your LTT screwdriver! This design features several valuable features: Its modular/stackable design allows…

Pobrania
366
Polubienia
74
Ocena
4,5

Menstrual product dispensers – collab FA CTU and Prusa3D

FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…

Pobrania
365
Polubienia
286
Ocena
4,67
P
Printablesmikedmor

Original Prusa Enclosure: Modular Transport Handles (with Grips)

Presenting the Modular Transport Handles - a remarkable blend of practicality and versatility, specially designed for seamless operability. This combination remix ingeniously integrates the gripped version of transport handles with an…

Pobrania
325
Polubienia
47
Ocena
5
P
PrintablesTeque5

Dog Grooming Vacuum Tool (modular)

Attaches to workshop shop-vac type vacuum for getting hair off my German Shepherds. Initial design is for vacuum with 2.5" hose. Real inner-diameter is 2.3" with 40mm depth and it fits perfect. If you need a different attachment diameter…

Pobrania
295
Polubienia
63
Ocena
0
P
Printablessh

➖🔘 Round rod - modular handle system (with HIDEOUT possibility)

Info: decided to realize one more idea for furniture handles this time very simple design of round rods (they are printed standing) easily adjustable for any length between thread holes M4 threads on the bottom of each holder for…

Pobrania
293
Polubienia
80
Ocena
4,67
P
PrintablesSB

Multicolor Modular Wall with Columns, H0 (1:87) – Perfect for Model Railways & Dioramas.

This highly realistic modular wall with columns is designed specifically for H0 scale (1:87) model railways and dioramas . The model is fully modular , allowing you to easily create straight or extended wall sections. It features separate…

Pobrania
285
Polubienia
41
Ocena
5
P
PrintablesNils Kal

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System - mounted to standard painting rods

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…

Pobrania
282
Polubienia
146
Ocena
0
P
Printables_KaszpiR_

18650 charger via HW-373 TP4056 USB-C module

About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…

Pobrania
276
Polubienia
39
Ocena
5
P
PrintablesJanek

HP Robots OTTO LEGO Platform – Modular & Play System

HP Robots OTTO LEGO Platform promění robota z výukového kitu na plnohodnotný modulární herní systém. Děti si pomocí vlastních LEGO kostek mohou robota OTTO upravit, rozšířit a přizpůsobit podle své fantazie – od hasičského auta, přes…

Pobrania
274
Polubienia
65
Ocena
5
P
PrintablesCloudyhead

Modular Lunar Lamp - Apollo 11 Landing Site Lamp for IKEA HEMMA (w/ Bonus Astronauts!)

On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…

Pobrania
266
Polubienia
108
Ocena
5

Complex test module

Push Your 3D Printer to the Limit! Test the Capabilities of Your Printer Take your 3D printing to the next level with our advanced test module. Designed to challenge every aspect of your printer's performance, this module helps you…

Pobrania
265
Polubienia
21
Ocena
4
P
PrintablesMHEU

Modular Router Bit and Bit Storage

For sorting the milling cutters, drills and bits according to the principle of a French cleat. Updated version of my first draft (817506-milling-cutter-and-bit-french-cleat) Also suitable for this system are my extensions for thread…

Pobrania
260
Polubienia
60
Ocena
5
P
PrintablesAstroGato3D

Cajitas! - Minimal Modular Boxes - Cajas mínimas modulares

Hello everyone! This is a system of modular boxes, lids (and future surprises) that are both handy and minimal in their filament requeriments. Those two features were the main design goals behind this little proyect. The idea was to…

Pobrania
256
Polubienia
41
Ocena
5
P
PrintablesBetschler

Housing for the Raspberry Pi standard camera module v2.1 with integrated focus adjustment

The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks

Pobrania
249
Polubienia
44
Ocena
5
P
PrintablesDom Cis

HEXAGONAL MODULAR SHELF / STRUCTURE FOR PRUSA RESEARCH MAKER FAIRE PRAGUE BOOTH

Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…

Pobrania
243
Polubienia
89
Ocena
0

Modular infill wall decor project ⬡

Panels are 230mm wide by 200mm tall & 23mm deep. Assembles to ANY SHAPE and you can add a screw hole anywhere! Template included to make your own ! Let me know if you have questions . Modular design allows for any layout. 5%…

Pobrania
236
Polubienia
158
Ocena
0
P
Printablesspm3x.com

The SP1 Eurorack Case - a modular 3D printed Eurorack Case

About The SP1 Eurorack Modular Case Why to be limited to modules when it comes to a flexible modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup…

Pobrania
227
Polubienia
41
Ocena
0
P
PrintablesWingedFuse

Flipper zero wifi module organizer frame for Peli 1010 case

This organizer frame is designed to secure the Flipper zero wifi module inside a Peli 1010 case. The Flipper zero wifi board should also have a case like these ones to work with this model.…

Pobrania
227
Polubienia
63
Ocena
5
P
PrintablesRedKrieg

Tablet/Phone Stand for Wyrmwood MGT (Modular Gaming Table)

This stand can be used inside or outside the table, but is designed for the outside. If you are looking for specific sizes/orientations, the tablet_stand.scad file should be able to generate anything you need using OpenSCAD. I can…

Pobrania
226
Polubienia
44
Ocena
4,33
P
PrintablesJoe

Gridfinity Refined Hammer Holding set (misc hammers), modular

These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…

Pobrania
209
Polubienia
26
Ocena
5
P
PrintablesPieter

Modular handheld sprinkler

necessities 1x o-ring (11mm diameter and 2,5mm thickness) o-ring can be taken from an old hose coupler. Assembly After you have printed the nozzle file, insert the o-ring on the nozzle like in the photo's. the caps can be easily screwed…

Pobrania
204
Polubienia
58
Ocena
5
P
PrintablesAdudino

Etagere Collection - Parametric étagères / Serving Stands. Modular Etagere / Serving Stand

Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…

Pobrania
198
Polubienia
63
Ocena
5
P

Low-Poly Ford Mustang Fastback - Modular Cars

Low-Poly model of a 1965 Ford Mustang Fastback 289. Included are functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This staple of American muscle cars is at roughly 1:25 scale.…

Pobrania
197
Polubienia
27
Ocena
0
P
PrintablesAntoine

Modular palette and paint system

Check the bottom of this description for updates. This is my modular paint system. The modules all fit in Honeycomb format tiles, which allows you to configure your own palette as you wish. There are other modules to keep thing organized.…

Pobrania
190
Polubienia
63
Ocena
0

Modular Ultimate Casing for Prusa MK4 (including bulletproof, hexagon/honeycomb and Voronoi style inserts)

Please support the original designer and check out their now updated (for MK4) original model that can be found here before considering this model as an alternative. Please excuse the current documentation on this project as I am still…

Pobrania
189
Polubienia
60
Ocena
5
P
PrintablesRoland Deschain

Mickey and Minnie Kissing - Modular Mouse Ears

A modular mouse ear with Mickey Mouse and Minnie Mouse kissing. You will need (3) 8mm x 3mm magnets per ear and attachment. If you don't already have one you will also need to print the headband attachment from the Blank Mouse Ears model.…

Pobrania
187
Polubienia
84
Ocena
0
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C R2-30° Element (multi part) / Märklin H0 modulare Brücke Gleis-C Element R2-30° (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Pobrania
182
Polubienia
21
Ocena
0
P
PrintablesJérémy Reeder

Modular Chessboard - 6x6, 8x12, whatevs

This set of “executive-size” (45mm) checkerboard squares is a simplified, frameless variant of Martin_au's larger modular modular tournament-size board . Interlock any number of squares to create a custom checkerboard grid. Common…

Pobrania
179
Polubienia
23
Ocena
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Pobrania
179
Polubienia
12
Ocena
3
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C R1-30° Element (single part) / Märklin H0 modulare Brücke Gleis-C Element R1 30° (einteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Pobrania
177
Polubienia
23
Ocena
5
P
PrintablesNahoj86

Bigger Modular Filament Drawer System

Print and assembly is the same as the original model. https://www.printables.com/model/788433-modular-filament-drawer-system Printed in Prusament ASA I used 20mm aluminium pipes instead of PVC pipes:…

Pobrania
176
Polubienia
26
Ocena
5
P
Printablesiwordthepuny

Modular Phone Holder

Overview This is a phone holder that uses a ratcheting mechanism to lock onto almost any phone securely and has different attachments that you attach to the main body of the phone holder to use it as a normal phone stand, attach it to…

Pobrania
175
Polubienia
75
Ocena
5
P
PrintablesOBConcepts

MODULAR MOLLE ATTACHMENTS

I recently got a military backpack and wanted to attach a medical pouch to it. I found that there are attachments online but I did not want to wait for one. After a minute or so in CAD and 15 min of printing I got what I needed. I hope…

Pobrania
169
Polubienia
40
Ocena
5