138 modeli
Description: Sometimes the chase for a mosquito or a fly takes longer as expected. Constantly keeping the finger on the button is exhausting, so there had a solution to be found. This gadget allows you to keep your Insekten Schröter or…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
Please feel free to support me so I can create and share more. Any amount is much appreciated PayPal me I've seen that a lot of people have issues with the 3M tape on these LEDs. So not wanting to go onto my roof more times than I have to…
Summary Designed to fit over the Z-stepper mounting bolts in the base of the print chamber (see photo). The model is a single piece. Print two of them. Discussion When doing a platform calibration, the printer will bring the print bed to…
This Govee Pro outdoor LED light (HERE) mount is friction fit around the top of the LED but remains loose around the bottom. This allows the mount to be placed over the strand (and not fall off) while attaching outside. The design is…
Picked up a set of the Govee RGBIC permanent outdoor lights but I'm not a big fan of the idea of using the adhesive. Partially because I don't want any residue to clean up in the future should these lights fail or loose their appeal and…
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Slight modification to the narrow mount introduced by Gelap with removal of two of the corners so there are only two mounting holes. Added two alternative versions for mounting the junction between light strings. One with just a single…
The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.…
With the Govee permanent outdoor lights to get the best scalloping effect each light needs to be placed the same distance from the house. So, I made this little tool that you can use to place one part against your house and hold the Govee…
I made this spacer tool to help install the excellent snap in Govee light holders from: https://www.printables.com/model/593227-govee-rgbic-led-permanent-outdoor-lighting-mountin This allows me to space them 8cm from the house, which is…
Simple wall-mount brackets for both the power adapter and controller module that come with the Govee Permanent Outdoor Lights kit. Mine are the non-pro model, from pictures it looks to me like the pro model uses the same power brick and…
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
Govee H706A Permanent Outdoor Lights Pro Mount Bracket I’ve designed two versions of this mount: A side-mount version A narrow-edge version requires just 1.5 inches of space. Both versions are designed with #8 self-tapping screws. I…
This is a complete redesign of my https://www.thingiverse.com/thing:3204558 gutter Christmas lights. The problem with the gutter lights is they only last 1 maybe 2 seasons. This new version is a thick screw in kind. Super easy to print.…
This is a bracket to be able to mount a light at the top center of a roof gable. It doesn't matter the pitch of your roof. You need to print 2 of the “gable mount 2” file. Outside of that it is pretty straight forward. I used #8 1/2"…
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
This mount gives you a flat surface to mount a Govee light in the top center of a gable roof peak. I designed it to perfectly fit a roof with a pitch around 5.3/12 with the arctan(5.3/12) = 23.83 degrees. It should work fine for roofs…
Saw a couple really nice designs for the mounting of these lights, but they were too intricate and not conducive to printing 120 of them to install my lights. Made this one to mount the lights at a 45 degree angle and adaptable to either…
Bracket for Eufy outdoor lights, remixed to add screw holes. Holes are intended for #6 wood screws. Prints fine without supports for me. See…
This is a remix of the original side drainer provided by HeyGears. With the original model, you'll have to use two M4x12 screws in order to secure it to the build plate. There are also other solutions out there to hang the buildplate at…
Gelap has made a great assortment of mounts for the Govee Permanent Outdoor Lights Pro kit. After installing them, I found a need for a few extra accessories to clean up my install. // UPDATE DEC 2025 Added my 4" x 8" approx. S Curve that…
A cover I made to block some of the govee lights installed at a friends house. I'm not 100% sure on the fit, but will update once I hear back. F3D and step files are included as well in case others need them. Made with PETG 0.2mm layers.…
Levitating a magnet above another permanent magnet is impossible! It doesn't matter how many permanent magnets you add to the system, it won't work! To make it work, you need one of two things: 1. Make the magnet above spin (but it will…
My wife is a Master Gardener and has a VERY large garden. She plants some things every year. Normal plant labels don't work, so she asked me to make her some permanent plant labels. Originally, I created this model in Fusion 360, but that…
I hated having to reach down to the floor to grab my phone charger's cable every night. This keeps it handy at the top of my nightstand. This is meant to be semi-permanent, once the dovetail slides together the interference between layer…
Govee RGBIC light mounts
I've designed a mounting plate for the Creality Ender 3 S1 to accommodate its Laser Module . In my case it is the 10W version, but the lower ones should work as well. The key advantage of this mount is that it provides more vertical space…
Made for Govee permanent outdoor LEDs. Using this the keep the lights aiming perfectly vertically straight when mounting along the sloped are of the roof line.
This is a library of small part organizer drawer replacements that have permanent dividers to create multiple bins in one drawer. The many available removable divider systems for this are great, but when working with tiny parts (e.g. M2…
DO A TEST PRINT BEFORE PRINTING A BUNCH This was made because some soffits have part of the rafters sticking out below them which makes it difficult to property align the lights. A solution is to buy long thin pieces of wood…
Einfach mit Std. Einstellungen für PLA drucken. Es sind 2 verschiedene Modelle für große (IKEA) Teelichter & ein Adapter um auch kleine Teelichter nutzen zu können. Wir haben die Drucke seit mehreren Jahren im Einsatz und es gibt kein…
This is a custom bracket for Govee Permanent Outdoor Lights (non-pro version) for vertical plane (90 deg) installation. I built this bracket specifically to install govee lights on my wooden fence with the lights pointing down. The…
Circuito Permanente de Jerez, Jerez de la Frontera, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate…
These mounts are for the newer E22 lights from Eufy, not the older E120. Ensure you have the correct lights. An easy way to tell is the E120 lights don't have any place to add a screw and only have 3M adhesive backing, the E22 lights have…
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
I live in an area where eves are not aluminum rather wood beams and stucco. Using the adhesive strips to attach the Govee lights was not an option. This braket secures each light and allowes for you to screw it into the facia exposed wood…
Govee tape fail? Here is a simple bracket to hold the lights up. Low profile as possible to not grab attention, and doesn't go over the lense and take away from lighting effects. .2mm layer hight with a .6mm nozzle no infill Any filament…
There are two parts of the Sharpie holder, which 20_Sharpie_holder is a base and 20_Sharpie_holder_pad is just a decoration - it is not necessary to print. Hole diameter = 13 mm / 0.51 in No supports No glue 15% Lightning infill is…
Need M5 screw and nut Build video: https://youtu.be/joOGsJAsfJ0 Category: Camera
Prima che lo shaper di input venisse rilevato fissando l'ADXL sulla superficie di stampa e il risultato non era certamente il migliore, fissandolo bene il risultato è perfetto
Govee Permanent Outdoor Lights Pro 2 Mounts If your home is like mine, your soffits require a bridge at specific intervals. This model creates a secure bridge mount with the security benefit of hiding screws behind the cap with a snap…
Mounting bracket (30mm) LED that covers the front face and sides. Useful for matching the color of your house or soffits. Also redundant if the VCB tape fails. The printed part is a snug friction fit so attaching them before screwing them…
I made this for attaching my ring light or camera on ceiling / wall. Quick release and tested with Manfrotto plate. Video of this thing: Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Category: Camera
Although I made a couple of versions with screws I preferred the clean look of VisualReversal's holder https://www.printables.com/model/593227-govee-rgbic-led-permanent-outdoor-lighting-mountin. This has a single, hidden screw So I made a…
Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke
This support is permanent and therefore always ready to receive the tray. Very convenient when you already have a busy hand. Printing: PLA, no support, 100% cooling, no special precautions. Place it 5cm from the front. Print Settings…
Fits perfectly when printed on my printer, you might need to adjust it slightly bigger or smaller. I will be installing these with outdoor 3M Command Strips so I didn't need holes but adding them in the slicer is pretty easy. I've…
My mom likes to have the names of her plants in the pots because she has A LOT of plants and varieties. She used to make new popsicle sticks with the names of her plants every 3 months or so because they would fade in the sun, get dirty,…
I haven't tested this model yet, so any feedback is appreciated. Designed for 13mm (½ inch) marbles or bearings. Support contact distance is set to 0 for permanent attachment.
Requires: One 42mm diameter pine dowel(length to preference). Two 3D printed wall brackets. Two 3D printed pole endcaps. Six 10g 45mm, self-embedding timber screws. Installation: Brackets: Pre-drill timber screws through PLA slowly to…
The E120 outdoor holiday lights come with only a small amount of clips. I'd gladly shill out another $15 for some more clips, but they currently aren't for sale. Instead, they expect your installation to be “permanent” with double sided…
This spoolholder fits most common 1 kg spools. It is supposed to be glued on top of the Prusa Lack enclosure.
Elegoo Saturn Ultra 4 Buildplate holder permanently installed (prt- and stl-file)
This is a very simple model. It's just a tube with a bevel on the top that allows you to position it over the dome of your Govee Permanent Outdoor Lights so you can spray paint them to match the color of your house (or whatever reason…
'leave on' holster for the large re-fillable markers from Pilot. Add own magnets - 2 sizes included in files.
The mount itself is attached to the surface of the fan with screws that are already in place from the factory. Since space is incredibly tight, screws are not an option. So accelerometer simply snaps in place with the printed cylinders…
Wife wanted the Govee Permanent Holiday Lights to look like old school C9 bulb strings, so I added a C9 holiday light bulb shaped diffuser to the mounting bracket, positioned so it gets fully illuminated by the bulb but does not disrupt…
Note that there are two versions of mounts provided - One accepts a removable cover and the other has no removable cover ability. The one that accepts a removable cover has an annular ring on the bottom designed to help prevent any light…
Got tired of trying to keep the hose off the floor and at hand when I'm working on a project. This lets me keep the hose handy as long as there is a horizontal surface to which I can attach the clamp. The clamp mount versions fit the…
NOTE: The model was designed for my 3D printer tolerances. If things do not fit or are too loose, you may need to adjust the dimensions. I also recommend high quality print settings for the cap insert, as the sharp edges will fray the…
Permanent Orienteering Course Control Point Marker Flag Setting up some permanent orienteering courses (POC) with ~3.25 x 3.25 in. (83x83mm) control marks (tiles) for placing on 4x4 posts, etc. Included are a variety of 3 letter tiles…
Permanent drip holder for Photon Mono 2, stays on during printing. Step file included for modification for other models.
This to assist install of the Govee Permanent lights (non-pro) with attached 3M tape on vinyl or aluminum soffits. I had spaced my lights 2.0in from brick and 1.5in from vinyl. When installing with 3M tape make sure to clean surface with…
3D printed clips to attach WS2811 Pixels in J-Channel to the soffit for Permanent LED Lighting. Printing: Clips: PETG or ASA - .3mm at 20% infill Drill Guide: PLA - .3mm 20% infill stand on end (will fit on Prusa MK3s size printer) Clip…
Angled bracket for the Asahom S108 Permanent Christmas lights. Lights slide into this mount and fit snuggle so that they don't fall out. It is at a 30 degree angle, great is you are installing on the Fascia facing back to the house.
9/23/2024 UPDATE: Tested Successfully Have connected and tested now, these are working great! If using KUSBA or other USB connected accelerometers, I found that an easy way to get connected in klipper is to use /dev/serial/by-path/xxxxx…
You will need a piece of standard 3M VHB tape. This tape is typically about 1mm thick. Simply stick the tape to the bottom of the finished print, and cut out the hole. Then check that your included MCX-to-BNC connector fits snugly into…
The AP900 is amazing all around BUT I cant stand the refill process, you either leave the probe in the port which looks terrible , or you insert and pull it out every time you need to refill it and most likely loose it placing it aside. I…
We all know the problem. Standing in the bathtub shower with the shower curtain trying to hug you while you are busy cleaning yourself. This is no more. Print out these bad boys, snap them onto the shower curtain and they will now neatly…
What This remix adds a mount for an ADXL345 accelerometer to the permanent BL-touch mount. If you already have a permanent mount and cabling for a BL-Touch, might as well throw in an ADXL345! Requirements 1x base abl_plate from the…
For some strange reason the controller does not have any mounting tabs, so I guess it's meant to just flop around on its cables. Hum… I printed in PETG with the top/outside face down and supports under the tabs. Fusion 360 model included.…
Print: PETG 100% infill for a more sturdy outdoor reliable hook. Install: Slightly unscrew gutter screws on both side of where you want to insert hook. Use plastic spudger (wedge) to slightly bring gutter out from fascia. While gutter is…
I made this model as an easy way to get consistent spacing from the house when putting up permanent LED lights, like those from Govee and Eufy. Fold the LED Spacer back and forth at the distance you want the LEDS from the house until it…
Glass marker. Possible own sign with permanent pen. Write do you want on it!!
I made these to cover the Govee lights to paint them. Initially I also designed the track but realized it would be a huge waste of time to 3D print the track myself when there are plenty of cheaper options online. The ones I am using are…
Here's a remixed version of the weather station enclosure for wall mounting. It's designed to use a DC threaded jack ( https://www.adafruit.com/product/610 ) for wiring a 5v supply to the USB power line so that your weather station can…
Had some left over eufy outdoor light strips - didn't want to use the adhesive for the ceiling, so I made a clip to snap to the drop ceiling rails. Edit-slight update to add fillets that were missed.
This is a screen cover for the ender 3/Pro. I recently got a Beaglecam and the glare from the screen looked a bit rough on the night vison time lapses. This cover is designed to snap into place to cover the screen. It is loose enough to…
Need M5 nut and screw (or you can use screw that came with camera accessories) Update to Permanent Go Pro mount https://www.thingiverse.com/thing:2229731 Category: Camera
I had cables of different diameters coming out of an electronics box that needed securing and this is the simplest solution I could think of. You can easily customize it to fit your needs. The Fusion 360 model is parametrized: each cable…
I have recently purchased a set of Govee Permanent Outdoor Elite lights. I did not like the idea of seeing exposed wires under my gutters. I saw that someone has made a cable runner channel with a clip-on govee light cover to make it seem…
This is a permanent parametric(ish) for attaching the prusalock semi-permanently to doors without locks. The model is parametric and can downloaded and modified on OnShape here using the Variable Table.
Remix of 2cm (3/4") male side of snap buckle for permanent attachment. I printed it with 5 walls and 35% infill.
Made for the Miele W4802 model, but should work for other similar models. After confirming it works, I recommend using a small amount of glue to make it permanent.
UPDATE: 2/9/26 Updated the design to have better heated insert support. New single bolt version. UPDATE: 7/27/25 Updated the model to support the use of a single M5 bolt now and better (not perfect) heated inserts. Enjoy!…
Dm me for any questions or to request a part for me to make, thank you.
The Pen Pear Pal is an ergonomic fixture that goes on a sharpie to increase usablility for people with a number of difficulties holding pens, such as arthritis, tremors, or fine motor disabilities by increasing the size and weight of the…
These couplers keep your Huckleberry Lighting permanent holiday lighting tracks aligned during installation and keep the ends of tracks aligned after installation. They snap into the track and have very small little nubs to keep…
Update: Added versions with side holes, and an updated OpenSCAD file to produce them. The 25x25 version now has two grate support beams, and there are also 40x40 and 50x70 versions. I also attempted microwaving two of the cylinders I…
This a solid end cap that fits the permanent trim on our website. Print: Printed with the solid flat face down. Printer: Prusa i3 MK3S+ Resolution: 0.25mm Infill: 35%, Gyroid Perimeters: 4 Layers: Top (4), Bottom (4) Supports: No…
This a middle joint that fits the permanent trim on our website. This is the half sleeve version that is installed while the trim is being installed. The ends of the trim slide into the clip and there's a positive stop (wall) in the…
Simple permanent padlock with a height of only 30mm. Once locked, it can only be reopened by destroying the lock. Preferred material for printing is PETG, but PLA works too. Simple assembly. Superglue can be used to make a padlock much…
This mount for the Goobay Bike-Power 5.0 power bank allows for a permanent installation of the power bank to any 42 mm headtube of a bicycle. Requires additionally: 4x - M4x8 Hex Screws 4x - M4 flat Nuts 2x - M3x16 Screws 2x - M3 Nuts The…
Permanent Quick Release plate for ARTCISE FH6 video head modified to use M6x20 for mounting Analog Sky Magic. Use double sided tape (or cloth tape) to increase friction between the QR plate and binoculars so it don't spin. Link to video…
Print in TPU, simply clips on your Picatinny rail and slides over the fill probe protecting it from dust and debris from entering the fill probe.
Remixed Banzaito's model to have holes for an igus cable chain as they are often included in Ender 3 to Switchwire kits.
Many Liturgical Books have Leather Tabs for easy turning during services. Sometimes, those tabs wear out, or they are just not there (or not in the right place). Now you can make your own tabs and place them consistently. There are three…
I designed and printed this adapter to put on my printer enclosure wall to vent fumes out of the nearby window when printing ABS/ASA. This adapter was designed to utilize a portable AC window kit that used a 5.1" exhaust hose (search for…
A 45-degree angled mounting adapter designed specifically for Govee Permanent Outdoor Lights 2 Pro . If your home features sloped, cathedral, or open eaves where the soffit follows the roof pitch rather than sitting level with the ground,…
