208 modeli
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
İt is printable.
Prints with no supports, if yours is fused too hard to break loose, try the extra tolerance version. 4 rotors spin, arms do not pivot. Depending on your settings, you might have to POP them loose the first time. Also available: Original…
Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…
IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…
Printed with 0.4mm Nozzle and 95 A Shore TPU, 0.15mm layer height. Camera mount allows for 4 different mounting positions depending on hole used and orientation, which is a millimeter more to the front or to the back compared with the TPU…
Fixed 5mm height instead of 6mm and T-mount for bi-blade. Originals by STRIKING FPV
Some low poly drones, I've included editable blend files with the mirror still enabled (blender3.6) feel free to modify them. Of course stl files are also included.
Quad-X Drone: Versatile Quadcopter for Racing, Surveillance, and More The Quad-X Drone is a multi-functional quadcopter designed for speed, stability, and versatility. Whether you’re racing, capturing aerial footage, conducting…
UPDATE February 05, 2017 Minor fixes in the STL's. UPDATE November 12, 2016 All frames have been update with improved propeller clearances. (5mm Increase). Enjoy! https://www.youtube.com/watch?v=zlCR2uV0GjE (Video from deDrones) Thanks…
un chassie relativement simple a réaliser mais plutôt efficace! ci vous avez des question, posé les moi dans les commentaires.
I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…
Originally I wanted a Quad design that would fit nicely on my newly assembled Prusa-Mini. (Love it) However most of what I saw was really uninspiring, not particularly durable, and far too heavy. Thus I set out with the following design…
Protective side plates for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in two different sizes to accommodate ESC wiring, blank side and USB port versions, and versions that have extra room at the rear to accommodate wiring…
This design is my prototype to foldable drone for my DJI Naza V2. Foldable Drone V2 is under development. It has minor design flaws which I will fix in V2, but for now it's printing pretty nice and the drone looks cool. Folded without…
Hello folks I was looking for a caged frame under 100mm for interior/exterior FPV and could not find one, so I designed my own. This frame is designed for 20x20mm FC and ESC mount and for 19/2035 propellers, this is a 96mm class frame…
Cushioned TPU feet for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in a variety of sizes and can be slipped on and holds itself in place, but I recommend using a small ziptie to prevent it from getting knocked off during crashes.…
Never drag your payload again! This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the…
As the name suggests, this is a 3D printed quadcopter. I am assuming you have some experience of building a RC machines if you are attempting to print this, so this will not be an inclusive tutorial. Printer Parts You Need: Antenna Mount…
Frame inspired by TBS Oblivion and Dave_C_FPV "The Micro Oblivion II" The main reason to create frame with support for wider stack mount types and a bit stronger. General notes 3 and 4 inches propellers support for stack 16x16, 20x20 and…
I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength. There is also a file…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Disclaimer : This frame was designed at the beginning of 2020 and files migrated…
UPDATE 28.6.2016: I've been busy last few months, hope to find time for this hobby and to finalize this project page Motor mount holes are rotated 90° in ARM_ALT.STL X550 is a Work-In-Progress - here's my To-Do list: upload some video…
Disclaimer: this is only a first look into this project, we´re midway through the developement. We decided to publish in such a early stage to collect as much feedback as we can. Speaking of me, the publisher, this is the first bigger…
This collection comes with a base plate that mounts to screw holes on the top of the F450 frame. Additional plates can then be stacked using common m3 spacers as seen in the photos. I use m2.5 thermal inserts for all screw attachments. -…
This is a remix of JAM3ZS Quad wall mount. This remix removes the screw holes for those that would like to use command strips in place of screws.
Basic frame for brushed DC motor (7mm) quadcopter with 30.5x30.5mm controller. holes supporting M2,5 screws. Frame consists of a base frame to mount the motors and controller and an extra mount for battery & accessories. Use appropriate…
Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…
I like dudufreeride wall mount (https://www.thingiverse.com/thing:4342345) for displaying quads on the wall, but I wanted to adapt it for using it with the Ikea Skadis pegboard system, so I took the original design as a base, removing the…
Thanks to pefozzy for the base model! The props have been changed to dual prop - same internal hole diameter as the original so the pins can bit fit and glued in the same manner. The image shows glow in the dark props (kids found it fun).…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This is a generic quadcopter model intended to…
"TinyTank" This is a prototype monocoque 4S 3 inch racing / freestyle quadcopter design with all the components (FC, VTX, wires, battery etc.) fitted internally. Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4) The FC and VTX are…
Rear antenna mount for the GEPRC/Clone Mark4 5 inch quadcopter frame. Accommodates a SMA connector, 25mm GPS antenna/module, and RX antenna(s). There are two versions, one with a single RX antenna, and one for 2x diversity RX antennas.…
A very long 10 inch fpv quadcopter drone leg.
This is a mold for vibration dampeners. Get some molding silicone an pure some dampeners ;) Here I made a video where I show you how I did some for my miniquad. Have Fun ;) Instructions Choose wich size you want and print 2 mid pices and…
You can use this to hold 2 LED's and mount it on your quad. Low profile and light. More cool stuff @ http://www.plastibots.com This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/aYbwqSqHA3W Category: 3D…
CinePUNK 3 (inch) modular cinematic quadcopter frame space for second stack (fpv camera board) easy to repair/print by modularity, limited supports used 16 x M2 screws for assembling (no other parts required to fly this) USB plug…
Information: This is an experimental propeller design for 5 inch quadcopters. I have successfully tested it, printed from PETG, but would not recommend it as replacement for regular propellers. These are a lot louder, more fragile and…
Version 2 of my FNQ220 (Foldable Nano Quadrocopter) After 3 years of field testing and several own builds with different configurations, this is the V2 (file version V.39) with a lot of features, bugfixes and improvements compared to the…
Benchy as a quadcopter drone with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. Two versions available (.stl & .3mf files available.) Quadcopter Drone Benchy. (One-piece…
The PH145 quadcopter was inspired by the RS90 and DJ105 brushless quadcopters. The RS90 looked like fun, but the DJ105 wasn't much bigger and produces a lot more thrust. The DJ105 uses 2.5 inch propellers, and I quickly learned that these…
Metal fork propeller pullers are difficult to use and results in the risk of broken or bent quadcopter components. This 3D print requires user to pull along the axis of the motor shaft, so no bending occurs. Device is pressed until hooks…
You can print this model if you own a Maginon QC-710SE WiFi and need a replacement motor cover for your drone. I suggest using any clear filament so that the printed part won't block the LEDs from the drone. Do you like my models?…
I'm giving you a base parts of my very first complex quadcopter model. It really works. The main advantage is the cover of the propellers. Feel free to use this model and remix it. Just remember to licence settings.
This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for…
This is a customizable frame for brushed coreless motor micro quadcopters. I started designing this when the frame on my Blade Nano QX started getting beat up. So far, the mounting area in the center is designed to hold the Blade Nano…
Wall mount for race drone. Version 2 is a little bit more beefed up Category: R/C Vehicles
Remix more stronger arms/motor mounts you can now access Scisky/Quanum USB Port better rubber mount hole for antenna integrated power Plug ( first insert plug than hot glue) higher topplate (+6mm) version with your own standoffs Thanks…
this is a suitable arm for a 450 style quadcopter. after trial and error i'm fairly happy with this design. my current arms have not broken in a long while. no support needed, i designed it with support included. Category: R/C Vehicles
After fooling around with 5" and a whoop, I decided to build a 3". But what fun would it be to design my own frame? Well, it worked out awesome. The frame is a TrueX, 130mm motor to motor. Overall weight (including props, battery strap,…
This is just a little keychain fob modeled after a racing quadcopter. I'd recommend using one of the prop guards to attach it to your keychain (or wherever) but there is a version with an extra loop as well if you'd prefer, it's…
This was an experimental project that has become one of my favorite quads. Initially intended to be a 2s Li-Ion cruiser, I have found that a light 450mah 4s battery really lets this guy scream. A gentle flight. a not so gentle flight Be…
My toddler son always wants to play with my 'real' quadcopter multicopters. So, I thought making a toy multicopter would be a fun project that he'd enjoy playing with. Solidworks files included for your remixing enjoyment. 1.16.14 update:…
Quadcopter frame for 7mm motors Length: frame: 75mm arms: 30mm Width: frame: 25mm arms: 8mm Height: Frame: 2.5mm Arms: 3mm This thing was made with DesignSpark Mechanical 2.0 Category: 3D Printing
Wanted a rather medium size quadcopter for basic flying, being able to transport FPV-camera and shooting HD-images, -video ... ... but it had to be foldable for transportation in a backpack, on holliday. Motors and props rather low kv and…
3D printed, modular quadcopter frame. General notes Supported propellers: 3.5, 4.0, 4.5, 4.7 and 5 inch Motor mount pattern 12x12 for all except 4.7 inch (this one is dedicated to DJI Spark’s 3x11mm mount type) Supported camera mount…
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle. It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.…
First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home: KK2 board (…
This project is not completed yet !!! ... however for those who is interested in there is also FreeCAD file available which is updated time after time. ... development discontinued... Category: R/C Vehicles
I made this quadcopter frame for the PepperF1SH project. I haven't tried it yet, but I want to CNC it. It's designed to be 1.5mm carbon, yet it weighs less than the original frame at 2.2g! Buy the frame here:…
I didn't see anything like this. So, here is one. :D Like real quads, it's important to have extra props handy. The hub can be used for the motors or you can use other round chocolates. I used Rolos ( https://www.amazon.com/s?k=rolo+candy…
I didn't want the top screws of the F450 frame damaging my lipo so I designed this top plate that carries a 5000MAH 3S battery and has room in the corner for a GPS mast and mount. Thanks for checking out my model I hope it helps you, if…
BigFoot 9.4" R2 (phantom edition) https://rotorbuilds.com/build/23274 Huge, 9.4" quadcopter frame based on TBS SourceOne and typical racer quadcopter parts. It uses DJI Phantom II motors/propellers because of it popularity and price. I…
This is a spin-off of MikeyB's excellent 3D Printed Quadcopter. I have made a number of upgrades and modifications. The arms are now solid. I ran several tests and the solid arms only weigh around 1.5 grams heavier when printed at 25%…
I'm creating a bigger and more efficient quadcopter (for longer flying time) that can be easily disassembled (to carry). I'd like to be control from the ground station, maybe later with optical recognition by raspberry pi using opencv or…
This is my remix of punkkills excellent Micro 105 FPV Quadcopter. http://www.thingiverse.com/thing:1221911 punkkills also gives credit to the FireFlo V2 and the Alpine Drones Micro H. The frame is light and fairly stiff printed with ABS.…
This minimalist sculpture of a drone quadcopter goes well with many decors. The sculpture is freestanding on a desk, shelf, cabinet, etc. Prints fast without supports.
The Compact Drone Miniature is a detailed 3D printable quadcopter model inspired by modern drone technology. Designed for makers, students, and tech enthusiasts, this miniature captures the sleek structure and propeller layout of real…
Replacement Blade Guard fitted with Haobo Explorer Drones Edit: seems to be also compatible with Syma X5 Explorers & T2M Spyrit quadcopters You can use a wire to connect each blade guard to avoid any risk. Category: R/C Vehicles
Designed specifically for my 3" FPV drone but will hold smaller as you can see in the images i also have my Darwin FPV Babyape in one as well.
I wanted a simple adjustable angle FPV bracket for my Crazepony (Crazypony) H210 and 700TVL FPV camera. I couldn't find one that I really liked to I put this together. It's intended to be adjustable, simple & lightweight. I also included…
These parts often break and it's nice to have a quick replacement part. This connects the 16 mm diameter carbon down-tube of a quadcopter to the frame.
Print in TPU. I used 40D shore
My latest Quad design. The frame is nearly fully printed. You only need some wooden bars and some screws. I've provided an Assembly Guide with detailed instructions and lots of Images (as we all love lots of images, don't we?) on how to…
Quadcopter style drone originally designed in 2017 for computer controlled swarm acrobatics. You can't buy the original electronics anymore but upgrading to newer ESCs and flight controllers should be easy. The original cost was < $200…
@mutefpv designed an excellent wall hanging hook for quadcopters. I have Slat Wall so I added the end to be able to use this on slat walls. Original files @ https://www.thingiverse.com/thing:4872172 Print Settings Printer: Prusa Mini…
YMZFPV provided me with this TPU Battery Holder STL for their Lightning1 2" FPV Quadcopter. I also made a larger remix for Tattu 550mah batteries that were slightly bigger.
3 inch quad :D Nozzle diameter 0,4mm Layer height 0,30mm 15~25% infill
This is a balance plug holder/leash to keep the plug from wandering into the prop. It's held great for this purpose and is pretty universal. Filament used - https://www.amazon.com/gp/product/B07BGXV6W5/ Print Settings Rafts: No Supports:…
Cinewhoop Drone Quadcopter Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) All my drone-related items: https://www.printables.com/@StudioMechanik/collections/3053772
Metal fork propeller pullers are difficult to use and results in the risk of broken or bent quadcopter components. This 3D print requires user to pull along the axis of the motor shaft, so no bending occurs. One end of print is for CW and…
This is a customization of Printbus Micro Quadcopter 105mm 110mm FPV Scisky , to fit the following hardware: Eachine FLF3_EVO Control Board JF-01 800TVL CMOS Mini FPV Camera (without the case) Added printable pins, clips and rollbar,…
Simple quadcopter landing skids. I printed the bottom layers with PLA for a sturdy base to attach screws, then the rest with flexible TPU for better shock absorption. There is a 16x19mm and 16x16mm mounting pattern. Let me know if you…
This propellerguards are for the Martian Micro FPV Quad Copter with 1103 motor mount and a maximum of Ø60mm propellers. Mounts underneath motor with the same screws as motor. Print instructions Category: R/C Vehicles Print Settings…
This has been a long term project of mine. It was heavily inspired by Joop Brokking's auto-leveling quadcopter build. I 3D printed the body of the drone to house the electronics. The flight controller for the drone was built using an…
CinePunk Release 3 (3 inch) symmetrical, modular cinematic quadcopter frame dual HD camera support (mounted on front and rear) designed for both: flexible (TPU) or stiff (PETG) ducts versions removable propeller ring to support TPU duct…
LED light in the shape of the 533 Swichback Frame. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing…
My version of a 275 size quadcopter with foldable arms. you will need some 3mm bolts for the top plate. I use 30mm bolts and nuts with nylon inserts. Each arm needs an additional 2 bolts, 3mm x 20mm. the camera mount has a 1 part and 2…
My simple, printable fix for MikeyB's FPV quadcopter. Please note this is for the older version of the arms (which I have reuploaded) Instructions Should speak for itself! Category: R/C Vehicles
This design is simply rolled over the wire, so they can be added or removed at any time without desoldering or pulling wires through. The F3D file is included to modify/create any length. As you make them longer (printed upright), the…
AirXRP Alpha is a 3D-printable, XRP-powered educational drone designed for indoor and outdoor experimentation. It combines a standard flight controller for stable flight with the XRP controller as a companion board, making it easier to…
Hello folks This frame is a remix of my PEX96 frame, it is designed for 20x20mm FC and ESC mount and for 19/2035 propellers. This is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been…
I got bit by the nano/piko/femto quad bug and had to make one. I liked the look of @microdure's frame, but it was bigger than I wanted. I had already started working up a very minimal frame design and printed it as 80/90/100 mm....but…
A simple design for Coreless Motor Quadcopter
Here are 3 kinds of TPU arm protections for the great BLS Forza frame. Enjoy ! Update : Added "BLS Forza Arm Protection - Triangle Gauche (wider back).stl" and "BLS Forza Arm Protection - Triangle Droite (wider back).stl" to try a less…
![[REMIX] Micro 105 FPV Quadcopter - 8.5mm/7mm Motors, Micro Scisky](https://media.printables.com/media/prints/96969/images/987621_814f2199-5e40-483a-8407-7894949c157c/d66285e5719711f3ad1de83471915b03_display_large_96.jpg)
