Wyniki wyszukiwania: raspi

Sortowanie

153 modeli

P
Printablesopenscan

Set of teeth - dental model - 3D Scan (test with Raspi Cam)

This is the very first raw test scan data done with a raspberry pi + camera and my DIY 3d printable photogrammetry rig. Everything is based on open soft- and hardware. So feel free to check out my website www.openscan.eu/?lang=en…

Pobrania
1118
Polubienia
36
Ocena
5
P
PrintablesBrentj84

RasPi 7" Touch Screen Case and Mount for 3030 Bracket (RatRig V-Core3)

I designed this case and mount for a Raspberry Pi 7" Touch Screen running KlipperScreen on my RatRig V-Core 3 500. The mount attaches through and on top of the 3030 Corner Bracket on the side of the printer. This design is 100% 3D printed…

Pobrania
302
Polubienia
66
Ocena
4,75
P
PrintablesUrsidae

Artillery Sidewinder X2 RasPi Camera Mount

Easy to print raspberry pi camera mount for Artillery Sidewinder printers. Perfect to monitor the first layer and high prints which my other static setups didnt. Tested on a Sidewinder X2 but should work on a X1 also. Please report back…

Pobrania
265
Polubienia
52
Ocena
5
P
PrintablesHenryS

RasPi DIN-Rail Mount

Print two pieces to mount your Raspberry Pi on a DIN-rail in a vertical orientation (USB ports facing up or down). Compatible to all models with 58mm mounting hole spacing. (RasPi 2/3/4 B; Zero) No supports needed. Works in PLA but I…

Pobrania
243
Polubienia
17
Ocena
4,5
P
PrintablesBasementLAB

Edge Corner Guard / Protector / Childproofing - Paraspigoli per mobili e varie

Edge Corner Guard / Protector / Childproofing - Paraspigoli per mobili e varie Easy to print, optimized filament usage (0,64m the small one) 20/01/2025 added “evo” models Resize/Scale to adjust dimensions All our designs are free to…

Pobrania
203
Polubienia
46
Ocena
5
P
PrintablesLenne0815

Raspi Zero W IR Cut Security Camera

A Case for a raspi zero w ir cut security camera, can be mounted in any position or just stood upright. It fits this cam type:…

Pobrania
181
Polubienia
18
Ocena
4
P
PrintablesKyle 🇬🇧

RasPi 4010 Cooling Fan mount - LDO Input shaper board compatible!

Slight change to the layout of the fan mount, to allow the use of the LDO Input shaper board. There are 2 versions: Display Port This version has access to the display port and the camera port, whilst still allowing the use of the LDO…

Pobrania
157
Polubienia
39
Ocena
5
P
Printablesmatieke

RaspiRCM - A Rechargeable Raspberry pi Zero RCM Payload Injector

This is a battery powered, rechargeable, Raspberry pi based RCM payload for the Nintendo Switch. The enclosure is made so that it can be battery powered and recharged with a built in USB micro b port. The payload can be injected into the…

Pobrania
146
Polubienia
5
Ocena
0
P
Printableste.3D

MST RasPi Case Fan Grill Collection

after printing the great Modular Snap Together Case by Sneaks for a Raspberry Pi 4 I wanted a grill to keep a little dust and fingers out of the fan. It’s my own design and not a remix but for linking reasons I labeled it as one. so this…

Pobrania
144
Polubienia
18
Ocena
5
P
PrintablesStefanWoX

Home Assistant Case for Raspi 4 with Sonoff V3.0 Zigbee Stick

A case for fitting the Raspberry Pi4 with Sonoff Zigbee V3 Stick . Needs: 4x Brass Inserts M3 x D4,6 x L3,0 4x Brass Inserts M3 x D4,6 x L5,6 4x BHS 3x6mm 4x ISO 7380-1 3x8mm Build should be selfexplaining, but: The 4 shorter Brass…

Pobrania
127
Polubienia
24
Ocena
0
P
PrintablesCharlie Gallo

Raspicam Pan/Tilt for MG90 servos

PanTilt for Raspberry pi Camera module (v1/v2) and MG90S servos remixed and edited model optional base for pca9685 included Print body A and B with supports Parts: 2x MG90S servos some extra M2 screws and bolts all the screws from the…

Pobrania
125
Polubienia
12
Ocena
0
P
Printablessmysnk

Raspi / ESP32 / Ethernet Keystone enclosure

Small Raspberry Pi / ESP32 enclosure with standard keystone ethernet jacks for connecting up peripherals. Category: Electronics

Pobrania
116
Polubienia
20
Ocena
0
P
Printablesmartingeyer89

Camera cover for Raspi Camera v1.3

This is a remix of the camera cover from TinkrMakr to fit the Camera v1.3 that I am using. I moved the camera hole a bit, removed the rounded and chamfered corners to make space for the camera pcb and changed the pin diameter of the…

Pobrania
113
Polubienia
8
Ocena
4,5
P
PrintablesFotoFieber

raspicam mount for BIQU B1

BIQU B1 mount for the ingenious https://www.thingiverse.com/thing:3114849 It doesn't limit my Y max position. If you have a problem with the design, please take a picture of it. I can then design and post a second STL which may fix this…

Pobrania
110
Polubienia
19
Ocena
0
P
PrintablesCris Persi

Bear Raspi 3B case

Just another Raspi case.

Pobrania
108
Polubienia
15
Ocena
4
P
Printablestkramm

Rack Mount Adapter for Raspi 2 and 3 for modular 19" 2U system

I designed this mount inspired by the one done by Krapozok ( https://www.thingiverse.com/thing:1793758 ). In the original thing instruction you can find the link for the 2U frame used for the module. There is one file with the whole…

Pobrania
107
Polubienia
31
Ocena
5
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.2 with changeable ventilation grid or fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Pobrania
103
Polubienia
12
Ocena
0
P

Ender 3 V3 SE Extended Cable Clip (for RasPi Bracket)

RasPi bracket: https://www.printables.com/model/921876-ender-3-v3-se-raspberry-pi-4-mount RasPi case: https://www.thingiverse.com/thing:3721616 .2 layers, 20% infill, PETG Fusion360 file included

Pobrania
103
Polubienia
7
Ocena
0
P
Printablesdaspixel

Waveshare 10" Displaymount with raspi in wall box (10.1DP CAPLCD)

Hi, did this for a collegue, maybe someone can use it. Sorry for the german filenames had no time to clean it up. the freecad files are included so you could mess around with it and improve it. I personally never used it - just printed…

Pobrania
102
Polubienia
12
Ocena
0
P
Printableschmeee

Raspberry Pi 3 B plus snap case ( RasPi B+ / 2 / 3 / 3 B+ )

UPDATE 2018.09.30: -Side panel GPIO updated: GPIO cut-out updated for a better snapping performance of side panel (see stl file geometry view, pictures show old version) A simple case for Raspberry Pi 3. Might also fit the RasPi 2 and B+.…

Pobrania
101
Polubienia
17
Ocena
5
P
PrintablesBitScout

Rain Gauge Raspi Edition

Important: Calibrate buckets to 5 ml per pulse. Example: Put 50 ml of water from a syringe into the funnel, tune the screws under the buckets until you get 10 pulses until the end of the syringe. Turning right increases the volume,…

Pobrania
98
Polubienia
13
Ocena
5
P
PrintablesHD_Creator

Raspi Camera for PrusaMini with articulated arm and ball joint adjuster

This is a housing for the RaspberryPi night-and-day cameras that typically come with two IR lights. Also part of this publication is an articulated arm with ball joint to fine adjust the camera angle. In my case the articulated arm is…

Pobrania
94
Polubienia
10
Ocena
0
P
PrintablesCIIID

FLSUN SR Raspi Mount with Camera

A simple, barebone mount for a Raspberry Pi with camera for your FLSun SR. The camera mount and clip will need supports. In Cura, set overhang angle to ~70°. You'll need some M2 screws to mount the Raspi & camera. The small clips are…

Pobrania
89
Polubienia
7
Ocena
5
P
Printablesjayree

RasPi Camera Module 2/3 Body with additional improvements

A RasPi Camera Module 2/3 Body with round edges and better fit with the body lid.

Pobrania
87
Polubienia
5
Ocena
0
P
PrintablesTalon K

Raspberry Pi Cam V2 (Raspicam) Anycubic i3 Mega S Prusa Mini Heatbed Mount

Here is a simple articulated and adjustable heatbed mount for the Raspberry Pi cam V2. It was an iterative process to get all of the angles dialed in to give a good field of view across the print bed. I have attached a picture showing…

Pobrania
86
Polubienia
18
Ocena
0
P
PrintablesOsman61

RaspiCam 1.3 Case

I remix the Camera Case for the old Raspi Cam v1.3

Pobrania
85
Polubienia
10
Ocena
5
P
PrintablesbyCx

RaspiRack: a rack for a lot of Raspberry Pis 2/3/4

This is my personal project of modular rack designed around Raspberry Pi 4. The rack comes with blades for: 5V/14A power supply Universal Raspberry Pi holder (works for RPis 2/3/4) USB 3-SATA converter 1 Gbit ethernet switch Beside these…

Pobrania
84
Polubienia
15
Ocena
0
P
PrintablesWalter Layher

Camera mounts for RaspiCam V3 and Arducam 16MP for Original Prusa Enclosure

I used the step file from the original model to adapt it to fit the PiCamera V3 module as well as the Arducam 16MP module. I also lifted the camera position by 40 mm, because I did not want the frame extrusions under the print bed in the…

Pobrania
83
Polubienia
10
Ocena
5
P
PrintablesHectic

Gehäuse für RasPi 3+ Mod. B

Beschreibung: Ein Gehäuse mit Halterung für meinen Octopi. Eine Aussparung für GPIO-Ports gibt es nicht, dafür einen Schlitz für die Pi-Cam und eine Befestigungsmöglichkeit für einen 40mm-Lüfter. Da ich selbst keinen Lüfter benutze, weiß…

Pobrania
80
Polubienia
6
Ocena
0
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.0

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Pobrania
79
Polubienia
2
Ocena
0
P
PrintablesSebastian

Raspi Zero Housing for BK-G4 Gas Meter (Version 2)

This project started with the rising gas prices. I wanted to have much better resolution of the gas usage in my house. Understanding when gas is burned should give me a better idea how to save it. The standard gas meters (in my case the…

Pobrania
77
Polubienia
7
Ocena
0

pi-like-stack - stackable customizable raspberry raspi pi case stack scad openscad

pi-like-stack Yet another way to stack pi-like or other SBCs (single board computers) on top of one another. For a standard 40pin raspberry pi A/B or similar board you probably want full.stl…

Pobrania
75
Polubienia
4
Ocena
0
P
PrintablesMimimi....

Modulares Gehäuse MG-01 für MG-Module ESP32, Arduino, Raspi, ILI9341, uvm.

Es handelt sich hierbei um ein Projekt, welches wohl für einige Elektronik-Bastler interessant sein dürfte, da es individuell angepasst werden kann (f3d-Files). Es folgen noch weitere Einschübe wie z.B. WT32-ETH01, IO-Klemmleiste, LAN872…

Pobrania
72
Polubienia
15
Ocena
0
P
PrintablesThingman566

Case for Raspi OSOYOO 5 Inch DSI Touch Sceen

This is case for the Raspberry Pi OSOYOO 5 Inch DSI Touch Sceen. https://www.amazon.com/gp/product/B07KKB5YS9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Pobrania
72
Polubienia
2
Ocena
5
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.1 with and without fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Pobrania
66
Polubienia
9
Ocena
0
P
PrintablesMrBoub

Prusa MK2/MK3 Raspi Camera Mount

Hi all, This is a movable camera mount I designed for the prusa MK2, MK2s and MK3. Though it fits most models. Currently it has 2 arms, an extra one is coming. I used M3 bolts and nuts to fasten everything. Happy printing! Print Settings…

Pobrania
61
Polubienia
7
Ocena
0
P
PrintablesZ122

Key for adjusting lens of RaspiCam V2.1

Key for adjusting sharpness of Raspberry Pi cameras V2.1 original lenses. This part can fit and can be hold in the window of some existing cases. Otherwise, it can also be manually holded. Layer height 0.1 or 0.2 mm, infill 15-30%

Pobrania
61
Polubienia
15
Ocena
0
P
PrintablesMimimi....

Modulares Gehäuse MG-02 - 19"-Rack-Modul 2HE - für MG-Module ESP32, Arduino, Raspi, ILI9341, uvm.

“ MG-02” 19"-Rack-Modul 2HE passend auch für die Einschübe “ Modulares Gehäuse MG-01 ” (siehe unten) (B:483.05mm x H:88.15mm x T:244.05mm) (Der graue Streifen ist die sog. “ColorLine” und besteht aus einem eingeklebten farbigen…

Pobrania
60
Polubienia
10
Ocena
0
P
PrintablesHD_Creator

Housing for 3x buck converters for Raspi and fan supply on 3D printer

I have made this housing for my Ender 3 Pro. On a 3D printer one needs at least (IMHO) a 5V supply for the RaspberryPi that runs Octoprint and a 12V supply for one or more quiet Noctua fans. The housing can hold up to three of the very…

Pobrania
59
Polubienia
6
Ocena
0
P
PrintablesJulsen

Wyoming Satelite - Home Assistant - Voice Assistant - Jarvis RasPi 2W

General info I have used this tutorial to get everything working. Parts 1x Raspberry Pi Zero 2W + Pins / Sockets ( approx. 20 Euros) 1x ReSpeaker 2-Mics HAT ( approx. 15 Euros) 1x micro SD Card (approx 6 Euro) 1x Dayton Audio DMA45-4…

Pobrania
58
Polubienia
22
Ocena
0
P
PrintablesHWA

Grasping at Can SUP Drink Holder Remix

Printed In PETG @ .2. Have included files for one color and also for MMU.

Pobrania
57
Polubienia
18
Ocena
0
P
Printables008 LAB

MICROLAB - RASPI 3B+ 0.5U PANEL

Couldn't find a raspi 3b+ plate, so modelled it up and put it up here for you all. Print profile has a modifier for 6 walls & hex infill to allow for airflow around the pi.

Pobrania
57
Polubienia
7
Ocena
0
P
Printablesfabilandwehr

Raspi Camera Mount angled (Anycubic i3 MEGA)

This is a remix of the Raspi Camera Mount by FoxPrint3D. I didn't really like that sharp 90° edge, so i made an angled version. The overhang is still printable without supports on any normal printer. I also mirrored the part to fit on the…

Pobrania
57
Polubienia
5
Ocena
0
P
Printablessmysnk

Mini-Rack Enclosure System for Raspi

Work in progress. Part of a Hydroponic Control system. Developed this independently, but have come across a bit better execution of the concept . Misc Notes Uses 2020 extruded aluminum for the Mini-Rack Mount holes are for a Raspi Zero SD…

Pobrania
56
Polubienia
11
Ocena
0
P
Printableslinuxpaul

Raspi 4 smart clip case

Simple Pi4 Cover with clipable top and basepart for clip in/out the pi carrier. Stepfile is without Pi model. Pi must be fixed with screws on the carrier. Category: Parts

Pobrania
55
Polubienia
4
Ocena
5
P
PrintablesToby

Night Vision Camera w/ Raspi Zero

This is a case to hold a night vision camera like those sold by www.electreeks.de, the one linked to below specifically together with a Raspberry Pi Zero 2 W. It comes with a tripod mounting point. As the camera does not have any mounting…

Pobrania
55
Polubienia
6
Ocena
0
P
PrintablesJack Hall

Raspi Plex/Nas Server

WORK IN PROGRESS Small form factor Plex/Nas Server Designed to Use 92mm Front Fan : https://www.amazon.co.uk/dp/B09VGWCH8K?ref=ppx_yo2ov_dt_b_fed_asin_title Raspi with Geeekpi Low Profile Cooler :…

Pobrania
54
Polubienia
19
Ocena
5
P
Printableshitjim

Sneaks Modular Raspi case - Heatsink clearance Fan + camera module 1_01

The fan + camera module needed extra clearance between the fan and the heatsink on my Raspberry Pi 4B.

Pobrania
52
Polubienia
3
Ocena
0
P
PrintablesWilfred

raspi zero camera housing

This is a raspi zero camera housing with wall / floor mount and ball pivot. it is made for the small camera modules. do not use the sticky tape on the camera flex foil, everything fits snugly. do not melt the pins inside the holes of the…

Pobrania
48
Polubienia
3
Ocena
0
P
Printablesbumgarb42

REPAIRED__raspi_bottoms__1_05-rpXXXXX - for Sneaks' Raspberry Pi cases

Please see Sneaks design for all information and instructions. When I loaded the __raspi_bottom__1_05-rp3bp STL file, Prusa Slicer noted 64 errors. When I loaded the __raspi_bottom__1_05-rp3bp-v75 STL file, Prusa Slicer noted 398 errors.…

Pobrania
45
Polubienia
0
Ocena
0
P
Printablesidcrook

Raspberry Pi 1U 10-inch rack-mount bracket fits 3 PoE RasPis

Place 3 Raspberry Pi PoE-powered side-by-side in a 1U 10-inch rackmount setup. Works great using the parts (ears and sled) from the original models as-is. Use a 2 X M5 threaded rod (250 mm / ~10 inch is widely available) plus nuts/washers…

Pobrania
43
Polubienia
10
Ocena
0
P
PrintablesMariobrosk

paraspigolo scorrevole IKEA

araspigolo scorrevole per ceste metalliche IKEA

Pobrania
42
Polubienia
2
Ocena
0
P
PrintablesRobinson

RaspiCam V3 Wide mount case XZ left Prusa i3 MK3S+ or PrusaBox Printer-Box

2024-01-19: Ajout d'une version de la face arrière avec fixation pour le rail des boîtiers de Printer-Box . (absent des photos) Pour la version Wide (grand angle) du RaspiCam V3, je n'ai pas testé avec la version normale (je crois que…

Pobrania
41
Polubienia
4
Ocena
0
P
Printablesjbenning

Pi Zero raspiaudio DAC case

Raspberry Pi Zero case thats designed to work with the DAC from RaspiAudio, model Audio+V3. The manufacturers product page can be found here: https://raspiaudio.com/product/audiov3/ I printed in both PLA and PETG. Either should work fine.…

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesOssilampe

Raspi_4 Dummy

Dummy als Platzhalter

Pobrania
39
Polubienia
9
Ocena
0
P
Printableskoen V.

RaspiCam V2 Mount Flat Surface

RaspiCam V2 Mount that can be fixed to any Flat Surface. You can drill small holes in the bottom to fix it with nuts and bolts Print instructions PLA/PETG 0.2mm layer height 20% Infill 4 Perimeters 5 Bottom/Top Layers No Rafts/Supports…

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJoseph Allen

Raspi Cam Back Ball Mount Light Ring

I modified @Sneaks Articulating arm mount to include a light ring. This is the light ring I used https://www.amazon.com/dp/B00BG9IDB2?psc= This is the power supply I used:…

Pobrania
36
Polubienia
15
Ocena
0
P
PrintablesZ122

Raspicam case for Ultimaker printers (Ultimaker 2/2+/extended,...)

Two parts case for adding a Raspicam (for Octoprint or Klipper, or anything else...) to an Ultimaker 2/2+/extended. (Should be compatible with other Ultimaker printers, except if there is already a cam at the same place ;-) ). BOM : 1x…

Pobrania
36
Polubienia
1
Ocena
0
P
PrintablesBass.Boi

Prusa MK2 Raspi Zero-W and Cam Z-axis holder

Made this remix from https://www.thingiverse.com/thing:2332678 by "darknao" Added clips to firmly hold Raspi Zero-W case from here: https://www.thingiverse.com/thing:2294759 Using Raspi Camera V2 holder from here:…

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesCrosslink

Electronics Cover for The 100 Raspi 4 / 5 version

Should be cut in two pieces for printers smaller than 300mm build plate size. Prints fine on the Bambu Lab plate but still too large for 220x220 plates if cut in two pieces.

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesMarcoBll

Raspi 4b NAS

Raspi 4b NAS Zu druckende Teile: 1x Base 1x Lid 1x HDD holder 4x standoffs Benötigte Teile: 1x Raspberry 4b 2x 2.5 HDD Waveshare USB 3.2 Gen1 HUB HAT 2x USB C cable 1x Double USB C charger 8x Schrauben für standoffs Schrauben (HDD +…

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesCarsten

Raspi Zero Handheld Console

I designed this as intemediate project for my bar-top arcade. However it turned out much more work than I expected. So I like to share for you to learn and remix. I used Blender for that, mostly because I am fluent with it and wanted to…

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesChrisO

Raspi 3b+ Case und LCD-Touch 3.5

Für mein 3D-Projekt habe ich ein maßgeschneidertes Gehäuse für den Raspberry Pi 3B+ sowie ein 3,5-Zoll-Touch-LCD konstruiert. Beide Komponenten sind so gestaltet, dass sie problemlos an einem 20x20 Profil montiert werden können. Die…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesJammy

ENDER 3 S1 Raspi side mount for Pi 4B/3B (Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case)

Rail measures 14.4mm across (I believe this is the deep rail - need to double check) Modular Pi case rail that attaches by machine screw and T nut underneath a printer. This is useful for the Ender 3 S1 / S1 pro series of printers that…

Pobrania
29
Polubienia
9
Ocena
0
P
Printableslromandine

Milwaukee Drywall Saw (Rasping Jab) Sheath Cover

A simple sheath for the Milwaukee drywall saw Made to fit model 48-22-0304 I attached the fusion 3D file and STEP file so you can edit as you see fit. I attached an Orcaslicer project file that has the text like you see int he pictures.

Pobrania
29
Polubienia
8
Ocena
0
P
PrintablesXTramp

Prusa Mk3 Raspi Cam on X-Axis

Ich habe einen Prusa i3 MK 3s und dort den Raspberry Pi Zero 2 W als Octoprint-Server auf dem Einsy-Board verbaut. Weil ich noch eine Raspberry.Kamera liegen hatte, habe ich mir einen Halter gebaut, um diese an der X-Achse zu befestigen.…

Pobrania
29
Polubienia
0
Ocena
0
P
PrintablesMT

Raspiberry Pi B with 3.5in LCD case

Need to put a 3.5 LCD on a raspberry pi B ( 2 usb port ), and adopted the design of these two cases: http://www.thingiverse.com/thing:256960 http://www.thingiverse.com/thing:1229473 You will need some m2 screws ( 12~20mm long ) to screw…

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesSam

Raspi 4B Case with Inset Lid

Raspi 4B Case / Box with Inset Lid No holes or ports, lid fits snugly on top, concealing Raspi 4B. Future plans are to make port holes and more supports. This is a first upload project.

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesStarGate01

AM8 SKR2 & RasPi & MOSFET Case

This two part case can be fixed to the left side of an AM8 ( https://www.thingiverse.com/thing:2263216 ) aluminium 2020 extrusion frame. Special care was taken to provide enough space for an USB cable which connect the SKR 2 and the…

Pobrania
27
Polubienia
5
Ocena
0
P
Printablesreibuehl

Rack Mount Adapter for Raspi 2 and 3 for modular 19" 2U system

Modified version of the front cover for mounting a HDMI panel mount extension cable. The mounting holes of the HDMI panel mount are M3 and are 29mm apart. I used the left angled version from here:…

Pobrania
27
Polubienia
8
Ocena
5
P
Printableschaw

TØRMÅNN Raspi PI 3 case enclosure delux

Case of the TORMANN project with funny swedish letters. PI Model for the rendering from: https://www.thingiverse.com/thing:2572698 Print instructions Category: Electronics

Pobrania
26
Polubienia
2
Ocena
0
P
Printableseth3real

RasPi Camera Mount

This is a remix to fit my 32x32mm RasPi camera . You will need to print the mount arm from the original thing, here: https://www.thingiverse.com/thing:3294512 How I Designed This I edited the original parts in Tinkercad . I'm no expert…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesDrexDamen

Troodon Raspi Mount

This is a replacement PanelDue mount for the Formbot/Vivedino Troodon with a secondary mount for a RaspberryPi (i.e. for Klipper or Octoprint etc.) I added the FreeCAD file in case you want to modify it. My Troodon is the latest model as…

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesDonPablete

Raspicam camera case gopro compatible

print in 0.2 layer, Can use gopro accesories, and ideal for short cables ti comes from bottom instead of top, also this prevents need to flip image.

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesDocWeebl

RasPi CSI Connector Box - Hex Pattern Remix

This was a quick request by somebody who wanted https://www.printables.com/model/103898-connector-box-for-rpi-csi-cables to match the hexagon pattern RasperryPi - Camera Module 3 case pattern of my remix:…

Pobrania
23
Polubienia
1
Ocena
5
P
PrintablesB2Ba

Raspi Camera V3 Tripot Mounting

You can make this spoolholder with the original Prusa Mini spoolholder. What else you need: 6x Ruthex M2 (melting nut) 1x Ruthex M5 (melting nut) Used PLA from RedLine Infill 15% (i think you can make less if you want) The camera housing…

Pobrania
23
Polubienia
3
Ocena
5
P
PrintablesMark

Spectrum Next Raspi Accelerator mounting bracket

A bracket for the KS2 Spectrum Next Accelerator Rasp Zero board. For those that dont have 11mm high spacers and 8 screws. You will need to thread the holes with a 2.5mm tap to get some screws in, 2.5mm machine screws, I have plastic ones.…

Pobrania
22
Polubienia
4
Ocena
0
P
Printablesblazentrance

Minimalistic Snap-on Screwless Raspi Case for Raspberry Pi Zero extrusion mount

Remixed Minimalistic Snap-on Screwless Raspi Case for Raspberry Pi Zero extrusion mount Mod the pin header position and add simple bolt holes, 2040 or 2020 both could work for bolt mount. with M3 bolt. I use it for Voxelab Aquila stock…

Pobrania
22
Polubienia
2
Ocena
0
P
Printableseisenfliege

Raspi1b-3b+Housing

Simple Raspberry housing with openings for the camera wire and the GPIO ribbon cable. It also includes a dummy model of a Raspberry 3b+ (Original: https://amzn.to/2ILjQzA ) for fitting tests. Fits to most B and B+ models (3B 3B+ 1B+ 1B…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesDirkHoefle

Desktop Raspi5 Case

Hier ist der überarbeitete Text basierend auf deiner letzten Version: --- This case needs some additional parts to complete: - You need an HDMI adapter: [Pi5-Connector-Adapter](https://www.waveshare.com/wiki/Pi5-Connector-Adapter) - A…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesSte

Gehäuse für Waveshare 7inch Display und Raspi - Housing for Waveshare 7inch Display and Raspi

Das Gehäuse ist sehr kompakt konstruiert. Damit die Kabel zwischen Pi und Display montiert werden können, sind zwingend Winkelstecker erforderlich. Für HDMI die Waveshare Adapter verwenden, für USB habe ich einen 180 Grad Adapter…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesHJ Visions

HJV Ender 3 RaspiCam Holder

Holder for Raspberry pi camera. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes are for M5 screws, arm is fastened under screen holder. Camera cable has room between two side planes behind the arm. Camera case is…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesMesut Yılmaz

Raspi Bracket

-xute raspberry kit on amazon -Model link on Onshape

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesIonNight

_raspi_module_1_04-SIF_CORRECTED_CAMERA_SLOT

The original module has a slot for the port marked “display”. I dont know how anyone could get that wrong with this awesome design. IIRC the author of the Modular Snap Case did not include the correct module. So I made this one from…

Pobrania
20
Polubienia
1
Ocena
0
P
Printablesjcgoette

Artillery Sidewinder X2 RasPi Camera Mount w/ ISO M14 Camera Mounting Point

Remix of Ursidae's Artillery Sidewinder X2 RasPi Camera Mount to be compatible w/ LittleHobbyShop's RPi mounting system. No longer requires any hardware – all parts are printable. For most basic setup, print LittleHobbyShop's…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesErmal

Wall-Mounted Towel Hanger with internal grasping spring

I got tired of my towels getting off the hanger while using them, so I designed this hanger. It grasps the towel with a spring system and doesn't let go unless you pull diagonally up in the direction of the opening. This hanger locks the…

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesesox

Raspberry Holder - Raspi holder for Prusa MINI base mod left leg

Original MINI Base mod has na USB key insert in it's left leg. I repurposed it to hold an Raspberry pi 3B with 3.5" Waveshare touchscreen that runs Octoprint + Octodash + WebCam. Holder uses two other mods: Base holder:…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesStefan

MP Mini V2 RasPi camera attachment

Raspberry Pi camera holder for Monoprice Select Mini v2. No tools or dismantling required. I can finally make time lapses with Octoprint . Print instructions Category: 3D Printer Accessories Summary Raspberry Pi camera holder for…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesMakanMaker

RaspiCam Raspberry camera v1.3 module tripod case

I had some trouble finding a raspberry camera case for a tripod that fits the camera module I have. So after a few tries I made my own :) Since the existing cases did not fit my module there is a good chance that the opposite is true as…

Pobrania
19
Polubienia
2
Ocena
0
P
Printablescel

Simple Raspi mounting Tabs

Very simple Tabs to mount a Raspberry pi with some backspace on a Wall or just on a Table for better airflow / cooling.

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesder_knapp_max

Anycubic Mega Pro Raspicam Holder

Small holder for the raspicam so it can be screwed into the head of the Anycubic Mega Pro. Camera sits just barely above the printbed - if the nozzle sits higher than in my case it might be too low, if that is the case - you might need to…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesChris_Schumi

RaspiCam for PrusaConnect

EN: I made an Raspberry Pi Case and Arm to mount a Raspberry Pi Zero 2 w with Zero Cam to my Prusa MK4. In order to get the Pi to send Pictures to PrusaConnect i used this tutorial on GitHub from cannikin/GitHub:…

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesDoctorBlue

FBG6 Raspi-cam Holder

Raspi-cam holder for Flying Bear Ghost 6. Haven't tried with thermal hat, might not be compatible.

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesHerrBatman

RaspiCam Mount for CR10 V2/V3

Needed to mount my RaspiCam to my CR10 V2 so i threw together a small mount in SketchUp. You need 4 x M2 Screws to assemble it. (i used M2x6 which is perfect for the clamp, the others can be a bit shorter) Nuts should not be needed as the…

Pobrania
17
Polubienia
1
Ocena
0
P
Printablestinkerist

Ender3 raspi case

Fits nicely on the original ender 3

Pobrania
17
Polubienia
0
Ocena
0
P
Printablessteamcatcher

The 100 1.0 Raspi 3 + SKR Pico Fan Case

Hello dear tinkerers, So I was not willing to accept the solution for the cooling of the Raspi (originally it was an Raspi Zero 1 W style Banana pi BPI-M2 Zero ) and the SKR Pico. So I made my own. Most of the parts should be printable…

Pobrania
16
Polubienia
1
Ocena
0
P
Printablessounds_like_rob

Raspi Cam HDMI Extension Case with bracket for Ender 3

I designed this to accomodate a raspberry pi cam v2 and the HDMI adapter board by Petit Studio ( https://www.tindie.com/products/freto/pi-camera-hdmi-cable-extension/ ) This is designed to use the hardware that comes with the HDMI kit!…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesJosephCADs

Snap On Raspi Zero Case Remix

Used PrusaSlicer 2.6 alpha 4 to cut and merge the models together. Printed the top cover flat, and the bottom one sideways. See photos for screenshot. Used organic supports to print the upper snap model. Dont mind the print quality. I…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesMorlac

RasPi holder for 3.5" HDD bay

Holder for Raspberry Pi in a 3.5" HDD bay Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Resolution:** 200 Infill: 20 **Filament:** DasFilament PLA grey Category: DIY

Pobrania
16
Polubienia
0
Ocena
0
P
PrintablesDr. Terra

RasPiO InsPiRing Glass Cabinet Illumination Holder

I have the RasPiO InsPiring Circle ( https://rasp.io/inspiring/ ) and wanted to use it to illuminate the glass cabinet in the living room. I created this small ring to elevate the led circle a little bit (as the contacts are below) and…

Pobrania
15
Polubienia
0
Ocena
0