Wyniki wyszukiwania: s300

Sortowanie

117 modeli

P
PrintablesMaurizio Lenzi

GoBo projector for Bowens mount flash (Godox MS300V)

A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…

Wydruk około 3,03 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
601
Polubienia
93
Ocena
5
P
PrintablesTDM465

FRC MS3000 camera mount

A remix of FRC3038's camera mount for better camera fit/hold and more istall options. This is a WIP (ver 2); Version 3 may have print-in nuts for the tilt axis to elliminate the need for the 3.5"+ tilt bolt

Wydruk około 4,06 €–4,97 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesCodyG

Lexus IS300 Cupholder, the full replacement

Install instructions and the original launch video here:

Pobrania
842
Polubienia
43
Ocena
5
P
Printables6d6178

BAHCO Combination Square Holder for Ikea Skadis, CS150, CS300

This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…

Pobrania
351
Polubienia
49
Ocena
4,75
P
PrintablesÖhrkie

Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700

Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…

Pobrania
346
Polubienia
10
Ocena
0
P
Printablesmsobadger

Underware / Multiboard TP-Link Kasa HS300 Smart Power Strip Brackets

Custom brackets for under-desk mounting of the TP-Link Kasa HS300 Smart Power Strip. bsed on the amazing Underware system from @HandsOnKatie_827995. I used Katie's power strip parametric as a starting point, but had to modify the power…

Pobrania
316
Polubienia
50
Ocena
0
P
PrintablesHans

Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source

This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…

Pobrania
294
Polubienia
116
Ocena
5

Futaba S3003 servo mount for 8020 series 10

A mount for a servo on an 8020 series 10 extrusion. Print instructions Unassociated tags: Series 10, servo mount Category: Electronics

Pobrania
280
Polubienia
19
Ocena
5
P
Printableskjbturok

Remix PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY WITH USB PORTS

This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…

Pobrania
272
Polubienia
27
Ocena
0
P
PrintablesCodyG

Lexus IS300 Cupholder, reversed

Same as the original, just reversed with the big hole towards the shifter.

Pobrania
254
Polubienia
22
Ocena
0
P
Printables7h3 0n3

Polar RS300X Adapter Plate - Updated

As many other users the wristband of my Polar RS300X broke. Therefore I designed this adapter plate so I can mount any 20mm wide wristband to to watch. After cleanly cutting off the rest of the original wristband you can directly mount…

Pobrania
253
Polubienia
3
Ocena
0
P
PrintablesScott

DPS3005 (DPS5005) Power Supply Case

I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…

Pobrania
225
Polubienia
38
Ocena
0
P
PrintablesDrjkcy

2003 Lexus ES300 Key Fob Housing.

After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…

Pobrania
211
Polubienia
16
Ocena
0
P
PrintablesStarwhooper

1liter extra coffeebeans for Siemens EQ.6 plus s300

Add one liter volume for extra coffee beans Category: Kitchen & Dining

Pobrania
203
Polubienia
26
Ocena
5
P
Printableshandro

Kasa HS300 Power Strip Mount remix center hole adjustment

Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 3mf is…

Pobrania
202
Polubienia
16
Ocena
0
P
PrintablesLiam.Kennedy

Side Skirt Clips for is200 is300 Altezza Etc

Replica of the elusive OEM side skirt mounts. Based on some old forum posts and some trial and error. I recommend printing them in Nylon, you might get away with using PETG but wouldn't recommend ABS/ASA due to their brittleness. PLA is…

Pobrania
177
Polubienia
12
Ocena
0
P
PrintablesCodyG

Lexus IS300 cupholder - two matching holes

Just like the title says, this time its symmetrical

Pobrania
177
Polubienia
12
Ocena
0
P
Printablesfcauwe

Mobile power supply (DPS3005) with black and decker battery (freecad files included)

I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…

Pobrania
176
Polubienia
45
Ocena
0
P
Printablestanmaychhatbar

Low-Poly Lexus IS300

Inspired by Turtleman's collection of Low-Poly vehicles. It uses the same wheel as his models (atleast his Porsche 911)

Pobrania
170
Polubienia
27
Ocena
5
P
Printablesandy

Mini Lab Bench Power Supply (DPS3003/DPS3005) Powered by Einhell Batteries (remix)

For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…

Pobrania
163
Polubienia
41
Ocena
5
P
Printableszeroflow

DPS3005 Power Supply Case

Remodelled in Fusion360 to make a few slight changes Add XT30 connector Change switch to a model I had at hand Add bottom intake vents to allow for natural convection Uploaded f3d source file for customization of input jacks

Pobrania
163
Polubienia
39
Ocena
0
P
PrintablesKamilCadDesign

Lexus IS200 IS300 Cupholder

Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required

Pobrania
161
Polubienia
10
Ocena
0
P
Printableshandro

Kasa HS300 Power Strip Vertical Rack Mount bracket

Rack Mount L Brackets for Kasa HS300 power strip using existing end caps from this model: Kasa HS300 Power Strip Mount by Pantherclawz Best to use my remix here as there are some fitment issues on newer HS300 power strips around the…

Pobrania
148
Polubienia
23
Ocena
4,5
P
PrintablesEric T

Depstech DS300 Endoscope Cable Holder

This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…

Pobrania
147
Polubienia
18
Ocena
5
P
PrintablestbkMAKER

Sony AS300/FDR-X3000 Cable Saver Case

*(Update: Made lens mount UNIVERSAL, now fits most 52mm lens. 5/12/25 * *(Updated clearance 10/27/24) * The legendary @theRealShooKon3 reached out to me with a problem that needed a solution. His IRL streaming camera kept breaking due to…

Pobrania
124
Polubienia
8
Ocena
0
P
PrintablesDex

Milwaukee Power Supply DPS3005

I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…

Pobrania
118
Polubienia
44
Ocena
5
P
PrintablesNuggetron

Mini ITX PC Case Feet KXRORS S300 S400

Designed some taller case feet for Mini ITX cases, specifically the KXORS S300 and S400 to help with bottom air intake. Original feet are 10mm tall, so I created 20mm and 30mm variants. The 20mm variant height is approximate. The hole…

Pobrania
118
Polubienia
12
Ocena
0
P
PrintablesHL

Kasa HS300 Power Strip Mount

This remix fixes the End piece so screws are more accessible, see original model for Front piece and print instructions.

Pobrania
116
Polubienia
14
Ocena
5
P
PrintablesPaul Arden

Mini Power Supply (DPS3003 and Laptop Supply)

Case to house a Rui Deng DPS3003 and a Sony Vaio laptop power supply (model 101310-11) which I happened to have on hand. I wanted something without any mains internal wiring. The laptop power brick puts out 19.5V up to 2A so perfect for…

Pobrania
112
Polubienia
25
Ocena
0
P
PrintablesBuffedelic

Prusa silver PSU DPS3005 mod

This case is a remix to accomodate the silver psu from prusa i3 mk3. Hole for 40mm 24v fan, original powerjack and on/off switch. Unsolder the powerpanic board.

Pobrania
110
Polubienia
7
Ocena
0
P
PrintablesEsmarra

S300 Mini-ITX Case Mod: Vertical Stand

I wanted a way to have my S300 case in a vertical position, but did not want the cables hanging from the top, so I've designed this model to do just that. You might need a PSU cable with 90deg. If the 90deg is facing the wrong way simply…

Pobrania
108
Polubienia
10
Ocena
0

EVOLUTION - RAGE 3-S300 (210mm)

Remix of the 255mm version for the 210mm and complete by the other necessary junctions. Use a 32mm suction pipe for the internal diameter and 41mm for the external.

Pobrania
101
Polubienia
20
Ocena
4
P
PrintablesNitek

DPS3005 / DPS5005 USB-C Adjustable Power Supply Case

I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…

Pobrania
95
Polubienia
18
Ocena
5
P
Printablespcfronin

Antenna Recreation for Toyota IS200 IS300 Altezza Gita Sportcross

If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…

Pobrania
91
Polubienia
8
Ocena
0
P
PrintablesCary

Work Sharp WS3000 sharpening platform

Hardware needed: (2) ¼"-20 X5/8" machine screws (2) ¼" washers (2) ¼"-20 square nuts (4) 4mm x 18mm bolts with nuts (4) 4mm knurled threaded insert nuts There are 3 files so far. One does not have a lip and allows you to adjust the…

Pobrania
90
Polubienia
7
Ocena
5
P
PrintablesJDIacobbo

Kasa HS300 Power Strip Vertical Rack Mount With Standard Server Rack Holes

Remixed the Kasa HS300 Vertical Rack Mount to fit standard server cage nuts.

Pobrania
90
Polubienia
7
Ocena
0
P
Printableswalldodge

Supermicro S3008L HBA Fan Mount

Adapter designed for 48x40x11 radiator. No additional hardware needed. Print Settings: Supports: No Resolution: 0.2 Infill: 100% Filament: PETG for "AOC_S3008L_cooling.stl" ABS for "AOC_S3008L_clips.stl" Assembly: Clips need to be glued…

Pobrania
80
Polubienia
12
Ocena
0
P
PrintablesEric T

Depstech DS300 Case

This case is specifically designed to fit the Depstech DS300 Endoscope Cable Holder designed by me. https://www.printables.com/model/674345-depstech-ds300-endoscope-cable-holder Using the design from Whity's Rugged Box model. You will…

Pobrania
80
Polubienia
10
Ocena
5
P
Printablesmkrpat

Bahco CS300 Kombinationswinkel Halter / Combination Square mount

Just for holding the combination square on my wall of tools.

Pobrania
80
Polubienia
16
Ocena
0
P
PrintablesFilesearcher

Power Record DS300 to Festool Vaccuum adapter

Support: no Layer-height: 0.2 Infill: 15% Material: PLA

Pobrania
77
Polubienia
10
Ocena
5
P
PrintablesMartinB

DPS3005, DPS5005 or RK6006 Power Supply case with fan

Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…

Pobrania
76
Polubienia
14
Ocena
0
P
PrintablesDah-Yoh Lim

Eufy 3C (S300) housing

Housing for eufy 3C (S300). Based on TTR's housing for eufy 2C. This is the extended version that provides better rain/sun protection, but the top corners might show a bit in the image, depending on how you print/install the housing.…

Pobrania
74
Polubienia
2
Ocena
0
P
Printablesatok

Case for RD DPS3005 with USB-C

I sell an improved version of this project as a kit: https://www.tindie.com/products/tokarski_dev/usb-c-bench-power-supply-kit/ (it has no pigtail usb-c cable, just a normal socket). More about the design process:…

Pobrania
74
Polubienia
16
Ocena
5
P
PrintablesZanthrax

Siemens EQ9 S300 coffee machine - brewing unit key

Sometimes the brewing unit will get jammed. This keys makes it a lot easier to open the brewing group to rinse it on the inside.

Pobrania
73
Polubienia
6
Ocena
5
P
PrintablesOutchris

WORX Landroid Vision Cloud S300-Displaycover

easy to print and should serve as protection for the display from sun and rain! should also fit the larger lawn mowers.

Pobrania
67
Polubienia
8
Ocena
5
P
PrintablesiScuzzy

NetAlly LinkSprinter LS300 hard case

A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries…

Pobrania
64
Polubienia
5
Ocena
5
P
PrintablesDuckferd

S300 Mini-ITX Case Mod: Horizontal to Vertical Stand

This is a mod for the S300 mini-ITX computer case. This mod eliminates the tall bottom feet and top handle, and replaces them with a front frame and lower profile rear feet. This allows you to use the case both in its default horizontal…

Pobrania
60
Polubienia
14
Ocena
0
P
PrintablesCatSailer1279

DPS3005 / DPS5005 Bench Case

Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…

Pobrania
58
Polubienia
7
Ocena
0
P
Printablesrnorris

Kasa HS300 Power Strip Vertical Rack Mount bracket - Fixed Cord Bracket

Follow the original build instructions: https://www.printables.com/model/532147-kasa-hs300-power-strip-vertical-rack-mount-bracket

Pobrania
54
Polubienia
7
Ocena
3
P
PrintablesToFe

Fun science: Modular lab power supply with DPS3005

Simple but powerful modular laboratory power supply from one DPS3005 modules and variable DC power sources (laptop power adapter, li-po battery, ... 36V industrial LED power sources). The main idea is that pupils can build a simple power…

Pobrania
53
Polubienia
19
Ocena
0
P
PrintablesKing

Ryobi Orbital Sander ROS300 Vacuum Adapter for Ozito 1250W 12L Stainless Wet And Dry Vacuum

Vacuum adapter that fits Ryobi Orbital Sander ROS300 output to Ozito 1250W 12L Stainless Wet And Dry Vacuum

Pobrania
49
Polubienia
4
Ocena
0
P
PrintablesAlpha_Salsa

Fan duct AXP90-X47 cooler | for S300 cases

A small and simple fan duct for the X47 cooler from thermalright. made for the S300 case (i.e. Shiny snake S300 and the other names the case is sold under). Slots in tight on the cooling fan and makes it so that hot air doesn't…

Pobrania
44
Polubienia
2
Ocena
0
P
Printablesbishoprob528

Lexus IS300 / Sportcross gas cap retainer

Print in TPU only. Useful if your OEM plastic connector has broken. *v2 added - fixed the push tab to print better, straightened the connector so it doesn't bunch up one way, and thinned it slightly to better rotate on the cap.

Pobrania
40
Polubienia
8
Ocena
0
P
PrintablesDon Pinpon

lexus is200 is300 outline

An outline of the iconic XE10 series (Toyota Altezza AS200-AS300, Lexus IS200-IS300).

Pobrania
39
Polubienia
1
Ocena
0
P
Printablesbka

Record Power DS300 mitre fence replacement

All you need are two square nuts (m4 and m5). I printed with 0.2 mm on a Bambu X1 with PETG + Supports enabled. Print time approx 1h.

Pobrania
39
Polubienia
4
Ocena
0
P
PrintablesAquaMorph

Jaspers Kasa Smart Plug Power Strip HS300 Mount

This is a mounting devices to hold a Kasa HS300 smartplug to a Jaspers stand. Part List Part Quantity Link Nylon M6 Nut 2 Amazon M6 40mm Pan Head Screw 2 Amazon Print Instructions All Parts Infill: 30% Supports: Tree Rafts: None Filament…

Pobrania
37
Polubienia
6
Ocena
0
P
PrintablesArtur Kulawczyk

Lenco-LS300 Hinge

I want to present a hinge designed as orginal part. The original hinge becomes deformed over time, so it must be replaced. Orginal part for that model are unavaible. I printed it in PET-G and ASA - I see no differences in short tests, i…

Pobrania
36
Polubienia
3
Ocena
5
P
Printableskweg

YALPS - Yet another lab power supply based on DPS3005 and ender 3 24V original power supply

So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…

Pobrania
34
Polubienia
6
Ocena
0
P
PrintablesYi Yu

A Snug Case for DPS3005/DPS5005 with Connectors and 5521 DC Jack

Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesPetr Stehlík

Case for DPS3005 power supply

Case for the DPS3005 programmable power supply. Created in OnShape.com - here's the source: https://cad.onshape.com/documents/a387dafa34ddb2b0b1734add/w/661b6e36556eeb673311f490/e/dcde09774cb5d0aa43c715d4 And here's the whole story:…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesAlexander

Case for DPS3003 power supply module

Case for power supply modules like DPS3003 DP20V2A 30V5A 50V5A DC32V/3A. Minimal design without screws ;) Print Settings Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: 3D Printing

Pobrania
32
Polubienia
6
Ocena
0
P
PrintablesOtann

Godox MS300 protective cap

Just a simple protective cap for the light bulb. It has an opening, so it does not offer full protection, but it prints nicely without any supports

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesLex

S300 bottle holder + 3 shots

Bottle and 3 shotglasses holder glasses size up to d-70mm You need 8 ball magnets d-5mm for shotglass and tubus cover and 8 ball or cylindrical magnet size d-5mm and lenght - 5 mm for tubus cover and hull shotglass "|holder"

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesGeorge?

LEXUS-ES300/330 CUPHOLDER-FIX

Custom-designed replacement cupholder for the Lexus ES300 (2001–2003) and ES330 (2004–2006). This part is designed to fix the common issue of the factory cupholder cracking, sagging, or failing to hold drinks securely.…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesPascal

DPS3003 USB-C Case with Banana Plugs

Case for the DPS3003 and USB-C PCB from China Category: Electronics

Pobrania
27
Polubienia
5
Ocena
0
P

Lexus IS300 - WaveShare 7HP-CAPQLED bracket

Requires trimming screen mounting points to fit the screen

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesFabi09

Edifier S3000 Pro Remote holder

Attach it with double sided tape and you are fine. :) I printed it with 10% grid infill and 0.28mm layer height.

Pobrania
26
Polubienia
5
Ocena
0
P
Printableslmn_

Server Rack Power Strip Adapter (KASA HS300)

Simple server rack mount for the KASA HS300. The one shown is printed in Siraya Tech ABS-GF, which is absolutely not needed. Depending on server temps please consider something other than PLA.

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesAvi

Shiny Snake / KXRORS S300 Handle Replacement Mod

2 Version is available - No Heat Insert & Heat Insert Required. Heat Insert Version requires M4*H 8mm*OD 6mm Heat Insert

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesMarsell Walis

Worx Landroid S300 Cutting Disc (WRI30E)

Replacement cutting disc, the old one was damaged. The knives are mounted on rivet nuts placed in a 6mm diameter hole.

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesMichael Schmidt

osVAC Neo M32 Adapter for Record Power DS300 Disc Sander

osVAC Neo M32 Adapter for Record Power DS300 Disc Sander Upgrade your workshop’s dust management with this precision-fit osVAC Neo M32 adapter. Specifically engineered for the Record Power DS300 12" Disc Sander , this connector bridges…

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesKamilCadDesign

Lexus IS200/IS300 Fuel filler cap pin

Replacement pin for Lexus IS200/IS300 Fuel filler cap Category: Other

Pobrania
20
Polubienia
9
Ocena
0
P
Printablesreinerv333

Absaugung für Record Power BS300 Bandsäge

Für meine Bandsäge Record Power BS300 eine verbesserung der Absaugleistung. Die Absaugung ist nicht optimal gewesen und so habe ich einen Einhausung um die untere Rolle der Bandsäge konstruiert die den Schmutz auffängt und dann zentral an…

Pobrania
20
Polubienia
4
Ocena
0
P
Printablesreinerv333

Maschinenschutz Record Power DS300

Für meinen Tellerschleifer einen Ersatzschutz um den zerbrochenen Maschinenschutz zu ersetzen! Ich habe PETG genommen mit 50% Füllung damit es stabil genug ist , den Pfeil habe ich mit Lackstift ausgemalt!

Pobrania
19
Polubienia
3
Ocena
5
P
Printablesbladel

DPS3003/5 Single Case

Remix for 130x95x40mm power supply. (24V 5A) Category: DIY

Pobrania
19
Polubienia
3
Ocena
5
P

Oscilloscope holder for «OWON XDS3000» or «Voltcraft DSO-6000»

Holder for oscilloscope of one of the following model series: Voltcraft DSO-6000 Series OWON XDS3000 Series

Pobrania
18
Polubienia
3
Ocena
0
P
Printablesjuha_j

Tower Pro SG92R adapter for S3003 slot

Hi, This adapter to fit Tower Pro SG92R servo on Futaba S3003 slot. SG92R's hole on adapter is tight, so use file or sharp knife for snug fit. SG92R will be at exact position of S3003 when using same mounting holes, so no need to modify…

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesMarAlMe

WdtPro S3000 Diffuser

English: Diffuser cap for the WdtPro S3000 flashlight. Printed in transparent Filament PM PETG. Deutsch: Streulichtkappe für die WdtPro S3000 Taschenlampe. In transparentem Filament PM PETG gedruckt.

Pobrania
17
Polubienia
2
Ocena
0
P
Printablesくコ:彡

Base/Hole Punch Replacement for Black and Decker BDEQS300 Sander

The base/hole punch for the sander got lost at some point, so I made a new one Print with whatever settings give you strong, durable prints (i used a .6 nozzle [I believe] and Inland PLA+), no supports necessary; if your printer or choice…

Pobrania
16
Polubienia
4
Ocena
0
P
Printablesilnerdchuck

Fan Duct for Noctua NH-L9a-AM4 S300 - Mini-ITX

Modified to fit on the NH-L9a-AM4NH-L9a-AM4 cooler increasing the height of the duct to fit flush with a S300 Mini-ITX Case. The height is now 20mm Temps improved by almost 10 degrees as you can see in the photos. Machine: Ender 2 Pro…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesOutchris

WORX Landroid Vision Cloud S300-Displaycover_update

Hello, I have slightly revised the first model. The extension can be easily attached, and the printing is also easy. The STL file must be separated into parts and objects, or you use seit 3mf file

Pobrania
16
Polubienia
2
Ocena
0
P
Printablesaaron barragan

2006 LEXUS GS300/350/450H e.t.c. CENTER DASH VENT A/C FRONT OEM BRACKET

2006 TO 2011 LEXUS GS300 GS350 GS450H GS460 CENTER DASH VENT A/C FRONT OEM BRACKET, I broke mine so I made a replacement and I think it might be useful to someone else since you can only buy it complete and it's not necessary, Once…

Pobrania
15
Polubienia
5
Ocena
0
P
Printablesexi
Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesMatcomaker77

TurboLamik Rotary witch mount for GS300/Toyota Aristo JZS161

Turbo lamik rotary switch mount for lexs gs300/toyota aristo. Should fit in place of the transmission ECT switch or VSC switch

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesIceman 7

Roseland RS300 Speakerholder

Remix eines Entwurfes zum Kleben oder an die Wand schrauben! Ich hoffe er gefällt euch! Lasst mir ein Like da!!!

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesSiS

Front panel to mount DPS3005 module in case for RD6018/RD6024

I had to mount some DPS3005 ‘Digital Power Supply’ modules (available on Aliexpress) and a reliable Mean Well HRP-200 power supply in a proper case. Most cases for modules in this format do not provide enough space to include the power…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesRaymondKelly

Shaver Holder Philips NT316010_Series3000

Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesSolkia2010

s300 Hard Drive Mount

Was frustrated with the s300's silly SATA drive mount, where you need a shorter gpu to use it. Saw the 92mm fan was basically just blowing air into the cable side of the power supply and decided to make a 2.5" HDD mount for it. Printed…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesFozzey

HS300 Power Strip Pole Mount

I printed in PC-CF 5 walls, 4 bottom, 5 top. holds pole extremely tight

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesSANAIR

Stackable tableconsole for DPS3005 (DPS30xx)

This DPS30xx encoslure ist mountable to a desk or shelve and can be stacked on top on each other. I have utilized an Ender3 Stock PSU as an external power supply for tje DPS3005. I have printed PLA, rather fast with 0.6 nozzle; 0.18…

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesTechNick

TSUN-MS300 Wallmount

Model for wallmounting the TSUN-MS300 microinverter.

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesThtunew

Kasa HS300 Smart Power Strip Magnetic Mounting Bracket

Kasa HS300 Smart Outlet Magnetic Mounting Bracket for 1/2" X 1/4" magnets

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesCharly BEGOOD

RWS300B-12 Enclosure

I would like to use a power supplie to convert an ADBLUE 12VDC pump on 220VAC Details : 1 Squaire Switch 21.5 x 26.5 4 M3x06 (max) to fix the power supplie inside the enclosure 10 M3x18 to fix the Top Case 4 Bolts M8x16 BTR to fix the…

Pobrania
9
Polubienia
2
Ocena
0
P
Printablesreinerv333

Abstreifer RecordPowerBS300

Ein Abstreifer der an die unter dem antriebsrad der unteren Antriebsrolle platziert wird und die Antriebsrolle von Spänen abstreift.Es ist eine Versenkung an der Unterseite mit der man es mit Doppelseitigem Schaumstoffband ankleben kann!…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesKriegst_N_Keks

GST 18V-125B Adapterplate for PLS300

My Father asked me to design an Adapterplate to use his GST 18V-125B on the PLS300. Since i couldnt find anything from other designers, i designed it myself. There is just the normal Plate that is the same as the Original that comes with…

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesSimon99de

Remix Housing / Case DPS3005 DPS5005

Deutsch: Remix von: https://www.thingiverse.com/thing:2951395 Ich habe es bearbeitet für Rechteckige Kippschalter: (19,2x12,4)…

Pobrania
7
Polubienia
3
Ocena
0
P
PrintablesNebulus

Ankle for S3003 dual cover

Ankle for modified S3003 Servo, used for robot project. Second cover has been mounted on opposite side of S3003 i.o. to obtain dual guidance for more stability. Designed with with FreeCAD, source file included Category: Robotics

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesKuro Nakajima

RX9070 GPU Brace for S300 and Universal ITX Cases

A simple parameterized GPU brace designed to support the end of a graphics card and reduce movement during transport or daily use. I originally designed this for my S300 ITX build with a Gigabyte RX9070, but the model is parameterized, so…

Pobrania
7
Polubienia
3
Ocena
0
P
PrintablesKuro Nakajima

TwinVortex Dual Fan Cooling Mod for S300

This is a custom dual 120 mm external fan bracket designed for the S300 ITX case. I created it to improve airflow and cooling performance in a very compact build where internal space is limited. The design mounts two fans externally and…

Pobrania
6
Polubienia
3
Ocena
5

es300 ashtray mount

i took this and made it mount as a replacement ashtray for my 1999 es300 had to resize the holder for my case

Pobrania
5
Polubienia
0
Ocena
0