Wyniki wyszukiwania: s500

Sortowanie

149 modeli

P
Printablesmeadeor

S500 Drone Frame

Modelled from a kit similar to this (https://goldenkoltsova.blogspot.com/2019/10/holybro-s500-v2-pixhawk-4-480mm.html) Frame is quite accurate - but not all parts tested.

Pobrania
699
Polubienia
20
Ocena
5
P
PrintablesStevenTh

Bosch Indego S500 rear wheels V1 [personal use]

Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous…

Pobrania
669
Polubienia
32
Ocena
5
P
Printablesabasson

PMS5003 / DHT22 (or BME280) / ESP32S Air Quality Sensor case

This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…

Pobrania
504
Polubienia
49
Ocena
0

DPS5005 Power Supply Case

A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-Function-Constant-Voltage-Current-Step-down-Power-Supply-Module-p-1161704.html?p=2@3021069489201207MV It has support for…

Pobrania
409
Polubienia
32
Ocena
0
P
PrintablesMatt Mayer

ESPHome Air Quality Sensor Housing (PMS5003 / DHT22 / ESP32 - Remixed for ESP32 DevKit V1)

What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…

Pobrania
398
Polubienia
50
Ocena
4
P
PrintablesÖhrkie

Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700

Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…

Pobrania
336
Polubienia
10
Ocena
0
P
PrintablesStevenTh

Bosch Indego S500 rear wheels V2

Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous seasons. Description My V1-wheels solved most of my issues that I had with the original Bosch wheels but there was 1 problem that I…

Pobrania
252
Polubienia
19
Ocena
5
P
PrintablesStevenTh

Bosch Indego S500 rear wheels V3 [personal use]

Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! History These are the 3rd iteration Indego wheels I've designed, always learning from previous models. First…

Pobrania
224
Polubienia
13
Ocena
5
P
PrintablesScott

DPS3005 (DPS5005) Power Supply Case

I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…

Pobrania
224
Polubienia
38
Ocena
0
P
Printables4nthonylin

DPS5005 Case

A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…

Pobrania
170
Polubienia
30
Ocena
5
P
Printablesopl1

Suzuki GS500E Front Fender

Suzuki GS500 (E) Front Fender. Modeled this for my cafe racer-esque bike. Tested to work with a 1996 model. It is designed in a way where you do not need to remove any parts to install it. it uses the stock mounting holes. I used black…

Pobrania
161
Polubienia
14
Ocena
0
P
PrintablesRed Haniwa

DPS5005 power supply case

Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…

Pobrania
156
Polubienia
48
Ocena
0
P

Suzuki GS500 1996-2004 Shadow / Sun Cover for Speedmeter Tachometer Clocks

Suzuki GS500 1996-2006 Cover for Clocks Skechup file included - feel Free to remix and share Category: Automotive

Pobrania
151
Polubienia
16
Ocena
0

case for: xys3580 / DPS5005 / U6229 power supply

This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…

Pobrania
149
Polubienia
22
Ocena
0
P
Printablessaeckel

Bosch Indego S500 rear wheels -remixed-

printed with 0.8 nozzle, 0.2mm layer height and 10% infill in PETG black. Print time about 27 hours (both wheels) gedruckt mit 0,8mm Düse, 0,2mm Layerhöhe und 10% Infill in PETG. Druckzeit ca. 27 Stunden (beide Räder)

Pobrania
143
Polubienia
4
Ocena
0
P
PrintablesHarsesis

7 Wonders (Second Edition) Insert by js500 - Base game card box remix

I just did a very small remix of the card box design by js500 (thanks for providing the scad files!). I just did not like the additional “Guilds” label and I changed the order of the slots, such that the guild cards are the last slot. I…

Pobrania
136
Polubienia
12
Ocena
5
P
Printablesrainb0w_wheez3

Outdoor enclosure for PMS5003 Particulate Matter Sensor

I needed an enclosure for the the PMS5003 Particle sensor that would meet my needs: slanted roof so rain/moisture rolls off mesh covered inlets to prevent critters from making a home inside anchor points for screwing into a pole / wall…

Pobrania
109
Polubienia
6
Ocena
0
P
PrintablesPrintbymr

Bosch Indego S500 rear wheels with Alfa romeo hub cab

Wheel for lawnmover with hubcab that screws in Print instructions: see .3mf file Note: Make sure that the center is solid otherwise it will break! Remix of this model https://cults3d.com/en/3d-model/home/wheel-bosch-indego-350-400

Pobrania
100
Polubienia
9
Ocena
5
P
PrintablesMatthias

DPS5005 USB C Adjustable Power Supply

A tiny, portable adjustable power supply based on the DPS5005 power supply module. Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest…

Pobrania
99
Polubienia
25
Ocena
5
P
PrintablesMistertech

DPS5005 Minimalist case

This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are…

Pobrania
98
Polubienia
22
Ocena
0
P
Printablesopl1

GS500 (E) Adapter For Univeral 7" Headlights

Most likely works for 1989 and forwards GS500E, GS500 models. Take measurements before. Included is the .step file for modification. It is friction fit into place (no visible mounting holes on my headlight assembly. For my specific…

Pobrania
96
Polubienia
8
Ocena
5
P
PrintablesNitek

DPS3005 / DPS5005 USB-C Adjustable Power Supply Case

I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…

Pobrania
95
Polubienia
18
Ocena
5
P
PrintablesGreatOldOne

Dual DPS5005 Bench Power Supply

Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…

Pobrania
88
Polubienia
15
Ocena
0
P
Printables0xkryo

S500 Quadcopter Top Plate with Vibration Isolation and Raspberry Pi

This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for…

Pobrania
82
Polubienia
3
Ocena
0
P
Printables3D Galaxy

Adaptateur Perche à lait Siemens EQ6 S500

Permet de maintenir une perche universelle plus large que celle d'origine

Pobrania
80
Polubienia
9
Ocena
0
P
PrintablesLaurin

Suzuki Gs500 Gear Display Holder

needs no brim, no support cut of the circles after printing It screws into the original screw behind the speedometer. Display: https://de.aliexpress.com/item/1005005548122637.html Gearsensor:…

Pobrania
77
Polubienia
8
Ocena
5
P
PrintablesRichard D

Remixed Soil & Sprout tray for the insert by JS500

Remixed to change the respective sizes of the wells for the soil tokens

Pobrania
77
Polubienia
10
Ocena
5
P
Printablesdwiedmer

Housing for DPS5005

Housing that is just big enough to fit an old laptop power supply and the DPS5005 . The laptop power supply can only output 18V / 3.25A, for my normal electronic projects that is plenty enough. I Have a 50V/5V version, but the main…

Pobrania
76
Polubienia
9
Ocena
0
P
PrintablesMartinB

DPS3005, DPS5005 or RK6006 Power Supply case with fan

Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…

Pobrania
76
Polubienia
13
Ocena
0
P
PrintablesAndi

DPS5005 Lab Bench Power Supply

This is my first design of a bench power supply base on a DPS5005 and a 36V 5A Power Supply Module. Update: 03.10.2022 I have added a V2 Version of the two part. They are much stronger and the fitting of the power plug screws is better…

Pobrania
74
Polubienia
9
Ocena
0
P
Printablesxshadows

PMS5003 + D1 mini pro box

Box with lid for my PM2.5 monitor with PMS5003 and D1 mini pro

Pobrania
72
Polubienia
3
Ocena
0
P
PrintablesBernd

DPS5005 BT Housing/Gehäuse

This is an enclosure for a DPS5005 voltage converter with Bluetooth and supply board 230V AC to 36V DC. For higher load of the DPS a fan 60x60x15mm was installed, but I also provided a cover without fan. The fan cover is for the inside,…

Pobrania
69
Polubienia
13
Ocena
0
P
PrintablesWiZeus

ULTIMATE DPS5005 Case (up to 190W) and built in separate 5V PSU (10W)

Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…

Pobrania
68
Polubienia
12
Ocena
0
P
Printables3Diana

Suzuki GS500 Motocycle

The Suzuki GS500 3D model is a detailed miniature recreation of the iconic street motorcycle. Supports needed - auto Removing supports - extra careful.

Pobrania
67
Polubienia
6
Ocena
0
P
PrintablesYuriy

Panels for case Kradex Z4AJ and RuiDeng DPS5005 or RK6006 DC-DC power supplies

This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…

Pobrania
63
Polubienia
10
Ocena
0
P

S500 Drone: universal rail mount

This is a universal rail mount for the S500 drone frame. Use zip ties to secure whatever you want on top and / or bottom. I mounted a VTX and a telemetry module side by side, with one slot left at the bottom. Print Settings Printer Brand:…

Pobrania
62
Polubienia
6
Ocena
0
P
Printablest0b1

Tilt stand for DPS5005 case

This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…

Pobrania
62
Polubienia
14
Ocena
0
P
Printablestreblig

Enviro+ and PMS5003 frame

About Designed for environmental monitoring, Enviro+ for Raspberry Pi lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. When combined with a particulate matter…

Pobrania
62
Polubienia
13
Ocena
0
P
Printablesddswb2

Intake Trumpet Suzuki GS500

Made some intake trumpets for the Suzuki GS500E, but should fit on any Mikuni BST33 carb ;) Printed in PCTG

Pobrania
61
Polubienia
5
Ocena
0
P
PrintablesAndrew Goodwin

Motorola XTS5000 Volume Knob

I dropped my radio about a foot off the ground and the original volume knob just shattered into pieces. This led to me searching for a replacement part. I was shocked at the prices. (Not really, Motorola stuff is really expensive) This…

Pobrania
59
Polubienia
3
Ocena
0
P
PrintablesGernot 2000

Suzuki GS500 e Tankgummi, 4451134A00

Hier mein Modell für ein Tankgummi für die Suzuki GS500 e. Wird mit TPU, 10 Infill, 3 Außenlinien gedruckt. 0.28mm Layerhöhe und 0.2mm Düse. Erfüllt seinen Zweck sehr gut.

Pobrania
59
Polubienia
4
Ocena
5
P
PrintablesCatSailer1279

DPS3005 / DPS5005 Bench Case

Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesBroden

S500 Frame Flight Controller/ESC Mount

Flight Controller or 4in1 ESC mount for the Holybro S500 drone frame. Standard 30.5x30.5 Stack Layout It slots into the frame slots in the bottom of the frame and I have it held in with 3M tape All you need is four 10mm M3 bolts Due to…

Pobrania
58
Polubienia
3
Ocena
0
P
PrintablesKonimaa

PMS5003T / WeMos D1 mini V4.0 - Air Quality Sensor case

Used Hot Glue to keep components in place

Pobrania
58
Polubienia
3
Ocena
0
P
Printablespetrepa

TiltBox for DPS5005

TiltBox for DPS5005 Simple and functional enclosure for the DPS5005 variable power supply, designed to make it easier to use and look good on your workspace. Features Angled Display : The DPS5005 module is tilted for better visibility and…

Pobrania
57
Polubienia
10
Ocena
0
P
PrintablesMeltinPlastic

WS5000 Rain Gauge Bird Spike Ring

This bird spike ring is designed for the Ambient WS5000 rain gauge. I had one from the manufacturer with 16 spikes, but the birds would land in-between the spikes and deposit their droppings to plug up the gauge. This is a rather large…

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesTheIgorMC

DPS5005 DIN mounting box w/ banana connectors

Simple box to hold a DPS5005 (link here: DPS5005 ) on a DIN rail. I mounted all my tool holders and stuff with a DIN rail on the underside of a custom made bench, so I needed something to hold everything on it. The banana connector used…

Pobrania
55
Polubienia
16
Ocena
0
P
PrintablesAndreas

Suzuki Gs500 E Gear Display Holder - Remix

Should fit for the universal 6 Gear indicators you can buy on aliexpress with centered holes. Mounted it with some screws which i found randomly in the all famous srew box. Mounting is also little tricky as the holes are covered. Got it…

Pobrania
55
Polubienia
9
Ocena
0
P
Printables0xkryo

Angled Rail Mount for Intel Realsense Camera (S500/S550/X500)

Print with the rail mount holes perpendicular to the build plate. This will ensure that the holes are a perfect circle and won't cause issues during mounting. Use Tree Supports (Auto). Only needed under the camera mounting floating area.

Pobrania
54
Polubienia
3
Ocena
0
P
Printablesarminth

Case for DPS5005 and DPS5020 Ruideng (RIDEN, RD Tech) with 200W PS Velika S-200-48

I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…

Pobrania
54
Polubienia
9
Ocena
0
P
PrintablesBenjaminC

DPS5005 Power Supply Case

This case holds the power supply at an angle for desktop use. There is a spot on the back for an XT60 connector for the power input. There are two holes on the front for banana screw terminals for the power output. There is a spot in the…

Pobrania
54
Polubienia
10
Ocena
0
P
PrintablesMacGyver88

SK120/DPS5005 Print in Place XT60

I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…

Pobrania
53
Polubienia
8
Ocena
0
P
PrintablesEddi Maevski

DPS5005 USB C Power Bench Power Supply

This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…

Pobrania
51
Polubienia
12
Ocena
0
P
PrintablesKamil Kaleta

Pocket Size 3D printed enclosure for DPS5005

POCKET SIZE 3D PRINTED ENCLOSURE Enclosure was design for DP modules like DPS5005, DPS3003 The ones without additional board. I decided to add small fan, but the board dont requaire one, so this is optional. As you seen on pictures, I…

Pobrania
49
Polubienia
12
Ocena
0
P
Printablesmarkjohn

S500 Quadcopter Leg to Body Joint

These parts often break and it's nice to have a quick replacement part. This connects the 16 mm diameter carbon down-tube of a quadcopter to the frame.

Pobrania
48
Polubienia
3
Ocena
0
P
PrintablesRaymondKelly

Worx Landroid Robot S500 i Upgrade 2. Back Wheels 2.4 Tire 70mm / FINAL

This is the final version 2.4 Tire So why, my be love robot slipped all the time when he drove over certain plates in the garden. The reason why he did that was, cause the friction of PLA to low. So I printed the tire in TPU. It was / is…

Pobrania
47
Polubienia
9
Ocena
0

Pegboard Power Supply (DPS5005)

This is a pegboard mounted power supply using a DPS5005 power supply module. This is designed to be as compact as possible, so you don't have a ton of room to work inside. You should wire everything up before you put the module in, since…

Pobrania
47
Polubienia
24
Ocena
0
P
PrintablesMurdoc

DPS5005 / XYS3580 power supply module case

Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…

Pobrania
47
Polubienia
6
Ocena
0
P
PrintablesAndrew

Ikea TRÅDFRI Shortcut-Button adapter to Jung AS500 series

Small adapter to mount a Ikea TRÅDFRI Shortcut-Button to JUNG AS500 frame (Rahmen 3-fach Jung AS500 583 WW alpinweiß). I use a 6mm magnet to hold the button in place and 4 screws (M3 6mm) to fix the adapter into the Jung AS500 frame. Have…

Pobrania
44
Polubienia
8
Ocena
0
P
PrintablesMark

BB-RS500 Bottom Bracket Inner Sleeve

Shorter sleeve allowing to fit a BB-RS500 in an 68mm bottom bracket without spacers

Pobrania
42
Polubienia
9
Ocena
0
P
PrintablesM S

Jung AS500 Network-Jack cover frame

This frame can used to adapt a lan-jack cover on a Jung AS500-series-frame.

Pobrania
41
Polubienia
0
Ocena
0
P
Printables0xkryo

Pixhawk Safety Switch Holder for S500 / S550 Quadrotor Frame

This safety switch holder can be installed on any one arm of the S500 or S550 quadrotor frame. It works with the screws

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesCyberpacman

Pico Enviro+ with PMS5003 Case

This is a case for A pico enviro+ with a PMS5003. it takes four 3mm heat inserts and M2 x 3mm Full Thread Cap Head Screws and two wall screws to fix it to a wall.

Pobrania
39
Polubienia
2
Ocena
0
P
PrintablesToFe

Fun science: Bench lab power supply with DPS5005 (two channels)

Simple but powerful laboratory power supply from two DPS5005 modules and 47V industrial LED power sources. 2019-01-18 Added modification for single DPS (vertical and angled variant) Print Settings Printer: Molestock Rafts: No Supports: No…

Pobrania
38
Polubienia
14
Ocena
0
P
PrintablesMscottie

Modified misc storage tray to hold extra car pieces for js500's Kanban EV insert

My copy of Kanban EV came with one extra copy of each wooden part, including the cars. I store these in the “player-aids-and-misc-storage” part, but two of the cars (blue and silver) are too tall to fit in the bowl under the player aids.…

Pobrania
37
Polubienia
7
Ocena
5
P
PrintablesChris

Outdoor Enclosure for Plantower PMS5003 / WeMos D1 Mini

Remix of rainbow_wheez3's outdoor enclosure for the Plantower PMS5003 Particle Matter Sensor https://www.thingiverse.com/thing:4581351 I wanted a bit more wiggle room for the WeMos D1 Mini control board and cables. This is part of my…

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesYi Yu

A Snug Case for DPS3005/DPS5005 with Connectors and 5521 DC Jack

Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesGoMorko

GS500 (Suzuki) Gear Indicator Case

Case for generic gear indicator that can be mounted on top of Suzuki GS500 dials. It’s an old motorcycle though the shape itself could possibly fit on some similar dashboard. There are two models - with and without Suzuki logo embossed on…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesGernot 2000

Suzuki GS500 e Tachodistanzring

Mein Tacho hat in der Halterung gewackelt, deswegen habe ich diesen Distanzring entworfen. Leicht zu drucken, einfach unter das Gummi von Tacho und Drehzahlmesser montieren.

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesJan Lukeš

DPS5005 laboratory PSU box

I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…

Pobrania
30
Polubienia
13
Ocena
0
P
PrintablesWWR

Case for DPS5005 and RSP200

I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…

Pobrania
30
Polubienia
4
Ocena
0

Dummy Armada insert for great 7 Wonders (Second Edition) Insert / Organizer by js500

This dummy armada insert for https://www.printables.com/model/455606-7-wonders-second-edition-insert-organizer-fits-edi in case you don't have the Armada Expansion yet. The size adapted for 235x235 build plate.

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesPisc

Small case for S500 frame

This model can be used as a case in s500 frame

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesGernot 2000

Suzuki GS500 e Karosseriegummi

Hier mein Modell für ein Karosseriegummi für die Suzuki GS500 e. Wird mit TPU gedruckt, 0.2 Düse, ohne Infill, zwei Wandlinien.

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesToddmc

Quest for El Dorado Insert / Organizer (Ravensburger Edition) - Requires js500's models

Modified the map tile holder and tray 2 to fit the slightly larger pieces used in the newer Ravensburger game edition. Original card holders still work and tray 1 is unnecessary because there are no new expansions, the rest of the files…

Pobrania
29
Polubienia
1
Ocena
0
P
Printablesmbravo

XT60E-F back panel for DPS5005-based power supply

I remixed the original backpanel to accommodate a female XT60 connector, so that I could use the DPS5005-based PSU with https://www.printables.com/model/322597-lrs-200-power-sleeve that I have built quite some time ago as a universal…

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesMscottie

Alternate storage for js500's Unconscious Mind insert to hold Locaton Rails w/o playmat.

This is a storage tray to use with js500's excellent Unconscious Mind insert to hold the two "Locations Rails" without a playmat. If you don't have (or, like me, ever use) the Meeting Table playmat, you might find this helpful.…

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesNEHiker

Labels and faceplates for optional addition to the amazing insert by js500 for the Trove chest - Too Many Bones

These are simply aesthetic changes/additions to this lovely insert. Most can be glued into position with superglue. Designed to be printed at 0.2mm height most are 4 layers thick (two layers per color). The exception are the tyrant box…

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesMatthias

Case for DPS5005 USB C Adjustable Power Supply

A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar. Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection. The fit…

Pobrania
25
Polubienia
8
Ocena
0
P
Printablesarminth

Case for airquality sensors BME680 and PMS5003

Use WEMOS clone ESP32 D1 mini to control PMS5003 and BME680 sensors. Both are included in Tasmota all sensors. 2 cases included: one WEMOS ESP32 and with both sensors and one with WEMOS ESP32 and BME680 only.

Pobrania
24
Polubienia
3
Ocena
0
P
Printablessfa

Dummy Armada Spacer for 7 Wonders (Second Edition) Insert / Organizer by js500

This is a spacer insert if you dont own the armada expansion yet. Print the same file two times. The size is 119x130x14mm Fits the 7 Wonders (Second Edition) Insert / Organizer by js500 Inspired by Vladimir Gamalyan 's dummy insert.

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesTony Stark

Cap for xiaomi mijia shaver s500

Cap for xiaomi mijia shaver s500, If your original cap is broken, like my. "я сделяль"

Pobrania
23
Polubienia
4
Ocena
5
P
PrintablesHarrZZ

PMS5003 Air Quality Sensor Case

This is the 3D-printed case from my build of a local PM1.0/PM2.5/PM10 air-quality sensor that reports straight into Home Assistant via ESPHome – no cloud, no app. What fits inside: - ESP32 DevKit - Plantower PMS5003T (particulate matter +…

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesJaapp

Bruynzeel S500 screen door hinges with various offsets

After I installed my screen door (and created holes in my doorpost) I found out the door rubbed ever so slightly onto my floor mat. I recreated the stationary hinge and added some height offset so the door could clear the mat. I also…

Pobrania
22
Polubienia
3
Ocena
0
P
Printablesandimoto

DPS5005 Case - Remix

Remix of a DPS 5005 Case. Added DC Connector with 11mm diameter. Added cutout for USB Controlboard. Case is 30mm longer.

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesRaymondKelly

Worx Landroid Robot S500 i Upgrade 2. Back Wheels 2.2 Tire 41mm

Worx Landroid Robot S500 i Upgrade Type of the Robot WM105_Si The mega Upgrade Front Spoiler Back Wheels 2.1 RIM 2.2 Tire 41mm 2.3 Tire 70mm / Diffrent veriations ------->>> 2.4 FINAL TIRE most improved…

Pobrania
21
Polubienia
6
Ocena
0
P
PrintablesGabi Grovu

44511‑27E00 - Suzuki GS500 tank vibration damper + lower bushings

According to ChatGPT, the 44511‑27E00 or my variant main_vibration_damper should fit: Suzuki GS500 (naked) - GS500 K1 -K6 (2001–2006) Suzuki GS500F (faired) - Models K4, K5, K6, K7, K8, K9 (2004–2009) Suzuki Bandit Range - Includes Bandit…

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesRCNet

DPS5005 Power Supply Case for Benchtop or SKADIS

This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…

Pobrania
20
Polubienia
7
Ocena
0
P
PrintablesJoão Amaral

Simple adapter to tighten GS500e damper rod

To assemble the forks, you need a tool to hold the damper rod and torque the damper rod bolt. I used this in a Suzuki GS500e but you can use it in any motorcycle that has a 24mm damper rod. Before using, insert the tool in the damper rod…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesJCJ

Philips Shaver Holder with Drip Tray – S7000 / S5000 Series

This holder is designed for the Philips S7000 electric shaver and is most likely also compatible with the S5000 series (not tested yet). The shaver rests horizontally in the holder, which makes it ideal for shelf storage or inside…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesRaymondKelly

Worx Landroid Robot S500 i Upgrade 3. Blade 3 times

Worx Landroid Robot S500 i Upgrade Type of the Robot WM105_Si The mega Upgrade Front Spoiler Back Wheels 2.1 RIM 2.2 Tire 41mm 2.3 Tire 70mm / Diffrent veriations ------->>> 2.4 FINAL TIRE most improved…

Pobrania
19
Polubienia
2
Ocena
0
P
Printables0xkryo

S500/S550 Rail Mount Base for NVIDIA Jetson Orin Nano Developer's Kit Case

Requires 4 M2.5 x 6/8 Screws to attach. I recommend printing in PETG or similar to avoid the plate bending over time due to weight.

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesRaymondKelly

Worx Landroid Robot S500 i Upgrade 2. Back Wheels 2.3 Tire 70mm / Diffrent veriations

Worx Landroid Robot S500 i Upgrade Type of the Robot WM105_Si The mega Upgrade Front Spoiler Back Wheels 2.1 RIM 2.2 Tire 41mm 2.3 Tire 70mm / Diffrent veriations ------->>> 2.4 FINAL TIRE most improved…

Pobrania
18
Polubienia
6
Ocena
0
P
PrintablesKoli3D

Gears for Shredder Peach PS500-46

Replacing the most worn gears for the shredder Peach PS500-46.

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesRaymondKelly

Worx Landroid Robot S500 i Upgrade 2. Back Wheels 2.1 RIM

Worx Landroid Robot S500 i Upgrade Type of the Robot WM105_Si The mega Upgrade Front Spoiler Back Wheels 2.1 RIM 2.2 Tire 41mm 2.3 Tire 70mm / Diffrent veriations ------->>> 2.4 FINAL TIRE most improved…

Pobrania
17
Polubienia
4
Ocena
0
P
Printables666dsa666

Kelant S500 Flexible Plate Spacer

Spacer for using a flexible plate on a Kelant S500 Without it my plate was pushing hard on the LCD glass and the arm was slightly crooked from it. Friction should be enough but I added a drop of glue just in case. Please relevel once…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesButcher9_9

Kreg PRS5000 Router Table 65mm Router Adapter

An Adapter for a Kreg PRS5000 Router Lift to suit a 65mm Router. The fit is very tight to make sure its super secure. Options for Smooth or keyed to a Makita RT0700C. Fusion files included. Print Settings Printer Brand: Creality Printer:…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesButcher9_9

Kreg PRS5000 Router Table 65mm Router Adapter

A simple collar adapter for a Kreg PRS5000 router table to support a 65mm Router like Makita RT0700C Options for smooth or keyed for the RT0700C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesMDrifterX3

s500 s550 multirotor motor protect cover w/cutout

This is just a quick remix for those that don't want to re-ziptie or wire their motors on a quad to install these motor protect covers. Print Settings Printer: Anet A8 Rafts: Yes Supports: No Resolution: .24 Infill: 15% Notes: Printed…

Pobrania
16
Polubienia
1
Ocena
0