Wyniki wyszukiwania: shopvac

Sortowanie

179 modeli

P
Printableskaje

ShopVac Small Crevice Nozzle - Skinny Version

This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…

Pobrania
303
Polubienia
43
Ocena
5
P
Printablesnicholaskillin

Ryobi miter saw to shopvac adaptor

My miter saw is the Ryobi TSS103T. The inner diameter of the part that attaches to the miter saw is about 37.9mm (1.5 inches). The outer diameter of the part that attaches to the shopvac hose is 55mm (2 11/64 inches). I had to do just a…

Pobrania
292
Polubienia
42
Ocena
5
P
Printableskaje

ShopVac Small Crevice Nozzle - Long Version

This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…

Pobrania
192
Polubienia
22
Ocena
4,5
P
Printablesmike

Sears Craftsman Shopvac Hose End

Endpiece from a Sears Craftsman Shop-vac hose used to connect accessories to. The original I had cracked. The outside diameter of the hose end is 2 1/4 inches. taken from https://www.thingiverse.com/thing:357574

Pobrania
59
Polubienia
7
Ocena
0
P
PrintablesJoeBranch

Shopvac to Dust Cyclone Adaptor

Simple dust cyclone to shopvac hose adaptor. This allow to connect the “standard” amazon dust cyclone to the “standard” ridgid type shopvac hose! Don't forget to post a photo of the modele you make here in the Makes & Comment section to…

Pobrania
59
Polubienia
10
Ocena
0
P
Printablestechfreek

Rigid r26011 Sander Shopvac (Dewalt DXV09P) Adapter

I recently tried to use my shop vac for dust collection from my sander. While the hose almost fit on the sander, it didn't quite fit. So I designed this part to ensure a solid connection on both sides. Printed vertically in PLA, no…

Pobrania
36
Polubienia
11
Ocena
4
P
PrintablesPr0nting

WEN 6502T benchtop sander shopvac hose fitting

Solid piece or glue-together adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection. Tight fit and looser fit model included, as the tighter fit cracked a bit when the vacuum hose was inserted too forcefully…

Pobrania
14
Polubienia
4
Ocena
0
P
PrintablesPeter H

SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH

Standard 50mm (2inch) vacuum cuffs tend to work loose in use on many tools and are rather bulky, so I was looking for a simple locking system that would be easily adapted to any tool, so that anyone with rudimentary cad skills could…

Pobrania
12 317
Polubienia
7349
Ocena
4,91
P
PrintablesPeter H

SHOPVAC CAMLOCK VACUUM CUFF ADAPTER 50MM TO 40MM ID

DOWNLOAD CAMLOCK and find more accessories HERE. This part will adapt a 40mm vacuum wand to the new CAMLOCK end. It should be a slightly loose fit depending on the taper of your vacuum. I use PFTE plumbers tape to ensure a perfect fit,…

Pobrania
971
Polubienia
211
Ocena
5
P
PrintablesPeter H

SHOPVAC CAMLOCK ACCESSORY ADAPTOR

DOWNLOAD CAMLOCK end fitting HERE. This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to…

Pobrania
912
Polubienia
146
Ocena
5
P
PrintablesPeter H

SHOPVAC CAMLOCK VACUUM CUFF ADAPTER TO 45MM (ID)

DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…

Pobrania
821
Polubienia
152
Ocena
5
P
PrintablesBChaps

DW735 Planer to Shopvac Attachment

This is a 90-deg elbow that fits onto the exhaust port of a Dewalt DW735 Planer and allows you connect to a standard shop-vac hose. It can easily be printed with no supports and has tapered ends for a snug fit on both ends.

Pobrania
581
Polubienia
48
Ocena
5
P
Printablestruglodite

Shopvac Hose Adapter Generator [Parametric]

These hose adapters REALLY SUCK!!! This is a spreadsheet parameterized Freecad 0.18 file for generating printable adapters/couplers for vacuum hoses and accessories. It can make them in any size and gender, as long as it is a straight…

Pobrania
520
Polubienia
54
Ocena
5
P
Printablesadrianvm

Dewalt DW735 planer-shopvac vacuum adapter, angled

This adapter snaps onto the output dust port on the DW 735 planer and connects to a vacuum hose with the output angled up and sideways so that the hose doesn't drape down over the outfeeding workpiece. The OpenSCAD file is parameterized…

Pobrania
404
Polubienia
45
Ocena
5
P
Printablesblerghcity

Dewalt dwe7485 Tablesaw dust port adapter for 1.5" hose vacuum (ShopVac)

The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…

Pobrania
393
Polubienia
47
Ocena
5
P
PrintablesTravockMD

2 sizes carpet nozzle attachment for WD vac (35mm, e.g. several Kärcher shopvacs)

I designed a 40 and 85mm wide nozzle to be attached to a 35mm (outer) diameter (shop)vac. Personally I printed it with 0.2mm layer height and 5 walls. Also, flipped it 180 degrees to have the round sides at the build plate. NO support…

Pobrania
365
Polubienia
39
Ocena
5
P
PrintablesMobyflavour

Makita 3709 DustExtraction for ShopVac

Clip on dust extraction for the Makita 3709 edge router/trimmer base to use with a 35 mm shop vac. Due to I was not able to find a design with either the right diameter for my 35 mm shop vac or the possibility to see what the router bit…

Pobrania
272
Polubienia
61
Ocena
5
P
PrintablesWHerzog

Festool Shopvac Extension

This is a optimized shop vac nozzle for the festool hose with a 35mm rubber connector. The object is based on a basic design by @johnmeyer I modified the Fusion360 files with the proper 35,5mm diameter and shorted the length of the nozzle…

Pobrania
258
Polubienia
30
Ocena
5
P
PrintablesRobbo

Karcher WD3 shopvac to 32mm adapter

I had a hose from an old Philips vacuum cleaner lying around, which I wanted to use to extend my Karcher shopvac. So I needed an adapter to connect both hoses. All Karcher adapters I found online had a too small diameter, so I modified…

Pobrania
258
Polubienia
39
Ocena
0
P
PrintablesMikeVB

hose holder for shopvac

printed at .2mm, 4 perimeters, 70% infill, supports everywhere = very strong.

Pobrania
255
Polubienia
69
Ocena
0
P
Printablesvr6syncro

SHOPVAC CAMLOCK MALE-MALE Adapter

Simple male-male Adapter If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de If you want to support me or thank me you can do it here Thanks, Alex

Pobrania
241
Polubienia
34
Ocena
0
P
PrintablesThyn

Keyboard Cleaning Vac Nozzle for Festool Shopvac

This is a nozzle for a Festool shopvac for cleaning keyboards, especially laptop keyboards. It is shaped so that it sucks between the keys, rows and columns, and the opening is too small for keycaps or track point caps to be sucked in.…

Pobrania
228
Polubienia
74
Ocena
5

Dewalt dw735 to shopvac

Simple funnel to connect Dewalt dw735 to 35 mm/ 40 mm shopvac. Outer diameter is 40 mm Inner diameter is 35 mm PETG recomended, or as you wish

Pobrania
226
Polubienia
51
Ocena
5
P
PrintablesBen

Ridgid ShopVac 2.5" Hose Compatible Inline Coupler

Coupler to join two 2.5" Ridgid hoses together.

Pobrania
219
Polubienia
44
Ocena
5
P
Printablesrh224

Rigid Shop Vacuum / Shopvac Drum Latch

I broke one of the drum latches on my Rigid HD NXT 6 Gallon Shop Vac that clips on the motor head. I was not able to find a printable part out there, so I measured and sketched up a functional replacement part in Fusion 360. Printed here…

Pobrania
190
Polubienia
20
Ocena
0
P
Printablesnikolai2111

Shopvac attachment

This attachment was designed for 12mm keyways, but it can also be used for other applications.

Pobrania
182
Polubienia
22
Ocena
0
P
PrintablesThis is G

Replacement caster wheel for ShopVac

I was given an old shop vac that was missing one of its wheels. I could probably find one online but figured I would make one myself instead. I originally printed the caster body in PLA but it ended up breaking after about 2 years of…

Pobrania
174
Polubienia
24
Ocena
5
P
PrintablesThyn

Shopvac to vacuum cleaner adaptor festool ctl mini to bosch solitaire sphera

This is an adaptor that allows connecting the hose of a Festool CTL Mini shopvac (and probably many other shopvacs) to the suction pipe and floor nozzle of a Bosch Solitaire Sphera vacuum cleaner. The problem is that the Festool shopvacs…

Pobrania
171
Polubienia
24
Ocena
5
P
PrintablesAntimaterie

Festool shopvac to Bosch tools adapter

This thingy connects a Bosch PEX 400 AE orbital sander to a Festool shopvac hose. The adapters aren't strict to that particular devices. Other tools and vacuums could be compatible. Check pictures for reference. Print instructions print…

Pobrania
170
Polubienia
27
Ocena
5
P
PrintablesWEnis

Dewalt Sander adapter to Rigid shopvac

Dewalt to rigid shop vac adapter

Pobrania
168
Polubienia
29
Ocena
5
P
PrintablesMikeVB

Larger Shopvac Hose holder

someone asked for a larger version.

Pobrania
162
Polubienia
28
Ocena
0
P
Printableslukas.daut

Shopvac wide vacuum attachment

The vacuum attachment needs minimal supports if printed hose side down. I printed it with: 0.3mm layer height 15% infill Brim and organic supports

Pobrania
157
Polubienia
19
Ocena
0
P
PrintablesJoe

DeWalt Stealthsonic Shopvac Elbow Adapter to 2" SCH40 PVC

Background: I was building a cart for my DeWalt 12 gallon Stealthsonic shopvac and found that the supplied hose for the duststopper was too short if I mounted it on top of the vacuum. This is a right angle (elbow) adapter for the shopvac…

Pobrania
155
Polubienia
13
Ocena
0
P
PrintablesBen

Ridgid ShopVac 2.5" Hose Compatible Y/3-Way Splitter

Print in a Y orientation. I used organic supports through the part to support the joint bridging, but I'm not sure if that's necessary

Pobrania
154
Polubienia
28
Ocena
5
P
PrintablesThe Mikester

Tablesaw / Shopvac Adapter

A hose adapter so that I could hook up my DeWalt table saw to the Stanley shopvac

Pobrania
138
Polubienia
18
Ocena
5
P
PrintablesBob

SHOPVAC (50mm) CAMLOCK with finer thread pitch

I have THIS hose for my 20 plus year old Shop-Vac (despite saying 1 ½", the OD is 50mm). The thread pitch in Peter's awesome design stretched the hose more than I was comfortable with, hence the remix. The diameter remains the same at…

Pobrania
135
Polubienia
23
Ocena
0
P
Printablesaubedj

Ryobi Mitre Saw to Dewalt ShopVac Attachment

Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw. Print instructions Print standing up with at…

Pobrania
130
Polubienia
11
Ocena
0
P
PrintablesTsiphon

Makita SP6000J track saw to Ridgid Shopvac adapter

This is a shop vac adapter for the Makita SP6000J tracksaw to Ridgid shop vac. The size of the ridgid side is for the larger tube (similar dimensions to the intake of the shop vac). I had to go through several iterations to get the…

Pobrania
124
Polubienia
5
Ocena
0
P
PrintablesEngScott2076

Festool Tracksaw to ShopVac 2-1/2" Adapter

I suggest printing the part in PETG, which is what I did. I believe PLA would be too shock-sensitive for a vacuum hose that gets dropped and knocked around. I printed with 0.3mm layers except where the notches are on the Festool end,…

Pobrania
122
Polubienia
13
Ocena
5
P
PrintablesFoden

ShopVac Crevice Tool

Remixed to fit the smaller diameter ShopVac wands - 1-3/8 inch (35mm) I believe. Resize % if it's too tight/loose Top/Bottom/Outer shells 5 Infill 10% v2 has a vent hole

Pobrania
115
Polubienia
15
Ocena
0
P
Printableskaje

ShopVac Small Crevice Nozzle - Short

This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…

Pobrania
111
Polubienia
19
Ocena
0
P
Printablestechfreek

SawStop CTS Shopvac Adapter

I wanted to hook up my sawstop CTS to my shopvac, but the host didn't quite fit. Not sure if this adapter will fit other shop vac hoses, but it works great for my shopvac (1-7/8 hose) I uploaded a version 2. Main change is I aligned the…

Pobrania
111
Polubienia
11
Ocena
0
P
PrintablesTech Guy

Vacuum Adapter - Vacuum Nozzles - Crevice Tools - Shop-Vac - Shopvac - Shop Vac

I was cleaning my truck and I needed to get in between the seats and the center console. I also wanted to use my big powerful Shop-Vac but use the smaller vacuum nozzles I have for my smaller Shop-Vac and my house vacuum. I created an…

Pobrania
106
Polubienia
20
Ocena
0
P
Printablesfaultedlogic

Shopvac Connector for Harbor Freight Benchtop Abrasive Blast Cabinet

This is a 90 degree elbow for connecting a full sized Shopvac to the Harbor Freight Benchtop Abrasive Cabinet. This fastens to the left side of the cabinet replacing what is intended to be the throughway for an air hose. I connect the…

Pobrania
104
Polubienia
8
Ocena
0
P
PrintablesDavid Bram

Shopvac vacuum adapter for 1.75" hose to 1.25" utility

I printed in ABS on XMAX3. This has a 2.5mm wall for durability.

Pobrania
94
Polubienia
16
Ocena
0
P
PrintablesPrintbird

(Unofficial) LowRider 4 CNC - 1.5" ShopVac Hose Adapter + Spacer

An unofficial hose adapter + spacer/brace thingy to zip-tie your 1.5" shop vac hose to the LR4. There will be an official LR4 1.5" hose → 2.5"dust shoe adapter from v1e, but I made this in the mean time to get started. This is…

Pobrania
88
Polubienia
11
Ocena
0
P
PrintablesDas Moose

2.5" Shopvac Hose

I was looking for an adapter that I could mount on my CNC that I could plug my Rigid Shop 2.5" shop vac into. I wanted something sturdy that will take come abuse and can be bumped into and not easily broken. The bolt holes are .25". In my…

Pobrania
86
Polubienia
23
Ocena
0
P
Printableschateau86

Hose and shopvac conversion for Ryobi stick vacuum

Fits Ryobi PBLSV717 vacuum cleaner and any other Ryobi vacuum that takes the same type of attachment. Shopvac adapter are designed for 1.25"/32mm shopvac attachments. Recommend printing in materials that give rough surface finish (e.g.…

Pobrania
86
Polubienia
18
Ocena
0
P
PrintablesDonJakobo

Ryobi Miter Saw (TS1340) to ShopVac vacuum adapter

There are a ton of other vacuum adapters for different miter saws, this one is made simply to fit my older Ryobi TS1340 , I wanted an easy dust collection method as the bag didn't work too well. This is a very simple pressure fit 'tube',…

Pobrania
83
Polubienia
7
Ocena
0
P
PrintablesThe Mikester

Mitersaw / Shopvac Adapter

A hose adapter so that I could hook up my DeWalt miter saw to the Stanley shopvac

Pobrania
82
Polubienia
8
Ocena
0
P
Printablestruglodite

Cyclone Filter 2.5" Shopvac Hose Adapters

This is a set of 2.5" hose adapters (large shopvac hose) for Dronnn's well designed cyclone vacuum filter design, which you can download here: https://www.thingiverse.com/thing:2829268 These adapters feature an aerodynamic transition to…

Pobrania
81
Polubienia
25
Ocena
0
P

Universal Adapter for XTool Laser Cutter to ShopVac Hose

Unlock cleaner workspace air when using your XTool Laser Cutter with my Universal Adapter! Specially crafted for enthusiasts and professionals alike, this adapter seamlessly connects your XTool S1* Laser Cutter's exhaust to a 1 7/8"…

Pobrania
81
Polubienia
14
Ocena
0
P
Printablescbiffle

Low profile Centec Quick-Click to Shopvac-sized tool adapter

This is intended to slot into a shop tool that's compatible with Shopvac/Rigid-sized “2.5 inch” vacuum hoses, and adapt it to the Centec Quick-Click system. Anticipated questions: Doesn't one of these come in a typical Quick-Click kit?…

Pobrania
76
Polubienia
8
Ocena
5
P
Printablester

Dewalt DXV10SA Shopvac to 2 1/2" Hose adapter

An adapter to connect a Dewalt DXV10SA Shopvac to a 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360.

Pobrania
76
Polubienia
10
Ocena
4,5
P
PrintablesEirik R

Shopvac adapter for Bosch PEX300 AE sander

I designed this simple adapter so that I could connect my shopvac to my orbital sander. It fits the profile of the sanding platform as well as the connecting pipe, giving a very solid and snug fit. The hose connection is 35 millimeters,…

Pobrania
75
Polubienia
4
Ocena
0
P
PrintablesBen

Ridgid ShopVac 2.5" Connection

STEP file for any projects you may have that need a connection point to a Ridgid 2.5" hose.

Pobrania
74
Polubienia
19
Ocena
0
P
PrintablesGreg

ShopVac Exhaust Deflector

My shop vac exhaust shoots out straight and kept blowing sawdust and small things around so I modeled this to deflect it up. It's a loose fit with a simple clip to hold in place and seems to work perfectly. This has a 2 ¼ ″ diameter…

Pobrania
73
Polubienia
18
Ocena
0
P
Printablescdsmakestuff

Dust Collection Port for Standard ShopVac

Just a simple dust collector port for tools. Sized to accept a standard ShopVac hose of 2.25" Print Settings Printer: homebuilt Rafts: No Supports: No Resolution: medium Infill: 50 Notes: will work in ABS or PLA Category: Parts

Pobrania
73
Polubienia
12
Ocena
0
P
PrintablesDaveS

Shopvac Camlock to Ridgid Sander

Designed to work with @PeterH awesome camlock design. Can remain in place when using original dust collection bag.

Pobrania
71
Polubienia
21
Ocena
5
P
Printablesmgerlach310

Ryobi P411 Orbital Sander to Rigid 2.5" Shopvac

Needed an adapter so I designed one in OnShape.

Pobrania
69
Polubienia
10
Ocena
5
P
Printablesdrei-d-w

Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter - 3DW

The Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.

Pobrania
66
Polubienia
10
Ocena
4
P
PrintablesFunkyJunk

SHOPVAC (50mm) CAMLOCK CONNECTORS WITH WIRELESS REMOTE

Working from the original make by @PeterH I wanted to add a wireless remote to control my vacuum. The remote is press fit into the housing without the need of glue or tape. There is an opening on the side that allows you to change the…

Pobrania
66
Polubienia
35
Ocena
0
P
Printableswoodchuckchuck

Camvac filter adapter for Shopvac filter

I made some modifications to fit commonly available ShopVac filters in North America (Shop-Vac High Performance 90398 Cartridge Filter) Amazon link I also changed the conical transition between the upper and bottom cylinders to a step to…

Pobrania
64
Polubienia
5
Ocena
0
P
PrintablesBenjals

Customizable ShopVac adaptor

This is a customizable shop vac and dust collector nozzle. I tried to make it as customizable as possible. There is a flange that can be used to mount to something for dust collection. if you don't want a flange you can just set the…

Pobrania
62
Polubienia
2
Ocena
5
P
PrintablesDaveS

Shopvac Camlock to Ridgid Stand Tools

Designed to work with @PeterH awesome camlock design. Will fit all Ridgid stand tools such as table saw, band saw, planer, chopsaw, spindle sander.

Pobrania
62
Polubienia
11
Ocena
0
P
PrintablesDirk Vranckaert

SHOPVAC CAMLOCK Adapter for Karcher Vacuum Cleaner

I've printed them in PETG because of the flexibility of the clip that snugs in the holes of the nozzles. Other than that printed on default 15% infill and a 0.2mm layer height. In combination with the different size hose adapters I'm able…

Pobrania
61
Polubienia
13
Ocena
0
P
Printablesdrei-d-w

Dewalt DWE7492 90° - SHOPVAC CAMLOCK adapter - 3DW

The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.

Pobrania
60
Polubienia
12
Ocena
0
P
PrintablesBilliam

Fein Turbovac to 2-1/4" Shopvac adapter

Simple adapter with a complex retention clip to connect a 2 ¼" shopvac hose to the Fein turbovac directly. The shopvac hose hose already connects just fine to the turbovac, but I wanted the locking/bayonet connection. Print the adapter at…

Pobrania
60
Polubienia
10
Ocena
0
P
Printablesyury.dz

Nozzle for shopvac

Small nozzle for shopvac with hose about 1 1/4" (32mm). Used it to blow fake spiderwebs with a hot glue gun. Edit at https://www.tinkercad.com/things/iJOSzkoQCtO

Pobrania
59
Polubienia
6
Ocena
5
P
PrintablesJustin Hinman

3M Xtract Orbital Sander to Milwaukee Shopvac 1-7/8" hose adapter

reused the original model's threaded portion for the 3M Xtract. This model fits the 6-gal milwaukee shopvac, whereas the original model fits the smaller milwaukee Milwaukee 2 gallon handheld shopvac, FYI.

Pobrania
58
Polubienia
3
Ocena
0
P
PrintablesJrmiller

ShopVac Hose Adapter

The adapter on my small shopvac got stepped on years ago and i finally decided to try and model a new one. Printed in petg

Pobrania
58
Polubienia
8
Ocena
0
P
Printablesvr6syncro

DN40 and ID 36 Vac Hose modified SHOPVAC CAMLOCK

German: Modifizierte Version für DN40 Rohre und Adapter. Kann auch für PVC-Kugelhähne verwendet werden siehe Bild. Der Hebelel wurde modifizert das der Magnet leichter rein geht und das er im offenen Zustand nicht mehr am Verbinder…

Pobrania
54
Polubienia
12
Ocena
0
P
PrintablesTheMechaniac

Qidi Plus 4 2.5" ShopVac Hose Exhaust Adapter

UPDATED 2/3/25 for slightly more foam gasket squish. This adapter will allow you to use a 2.5" ShopVac brand hose (commonly available in the USA) as an exhaust hose to vent your printer outside. The models include custom supports which…

Pobrania
52
Polubienia
8
Ocena
0
P
Printablesdrei-d-w

Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - ShopVac CamLock Adapter - 3DW

The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…

Pobrania
51
Polubienia
6
Ocena
0
P
Printablessam

FESTOOL Kapex KS 60 E to SHOPVAC camlock (male) Adapter + 90° version

This is an adapter to connect the standard FESTOOL Kapex KS 60 E miter saw vacuum port to a SHOPVAC camlock connector. On side A is the festool part and on side B the camlock male part. An additional thanks to…

Pobrania
51
Polubienia
5
Ocena
5
P
PrintablesJens83

Worx vacuum to osVAC adapter shopvac WX031.9

Adapter for the great Worx battery powered shop vac WX031.9. Fits both the hose connect on the vacuum itself as well as the vacuum hose. Second adapter is for the nozzle so it can be attached to an osVAC hose. Since the vacuum hose has a…

Pobrania
51
Polubienia
5
Ocena
0
P
PrintablesLugose

WEN CT1065 to Rigid Shopvac adaptor

None of my adaptors worked for this saw to my shopvac (Rigid), so I made one. I printed this with ABS and it is a tight fit, but that is a good thing. So far it is strong and working well. You could also maybe use TPU, but it might slip…

Pobrania
49
Polubienia
9
Ocena
0
P
Printablesdrei-d-w

Dewalt DWE7492 - SHOPVAC CAMLOCK adapter - 3DW

The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.

Pobrania
48
Polubienia
6
Ocena
0
P
PrintablesJohng4123

Dewalt sander to shopvac adaptor

A simple adaptor i made for my DeWalt Random orbital sander so that i can replace the bag with a shopvac.

Pobrania
46
Polubienia
12
Ocena
0
P
Printablesthebrownwelsh

Belt Sander - 30mm male connection for CamLock ShopVac system

(Wasn't sure which 3D model I was supposed to use as my “remix source”, so I went with the one that had the instructions for making your own male connections) Long story short; I recently started using the CamLock system this model…

Pobrania
43
Polubienia
2
Ocena
0
P
PrintablesDavid Ramage

Ryobi Random Orbital Sander Shopvac Adapter

A simple adapter that allows hooking a ShopVac up to a Ryobi random orbital sander for dust collection.

Pobrania
43
Polubienia
7
Ocena
0
P
PrintablesPjotrStrog

ShopVac Nozzle for flexible wire hose

A shopvac nozzle meant for a 12cm wirehose. A broomstick clamp is included for adding … a broomstick. For most of you the 12cm diameter will be a bit too much so I included the Fusion 360 file to alter the dimensions and features. It's…

Pobrania
43
Polubienia
22
Ocena
0
P
PrintablesSNE3D

ShopVac tool mount

This is a simple mount for some light weight ShopVac tools.

Pobrania
43
Polubienia
10
Ocena
5
P
PrintablesSteve Grandpre

Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander

Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander

Pobrania
42
Polubienia
4
Ocena
0

Dewalt Compound Mitre Saw Shopvac Adapter

Made this to connect the bag adapter on a Dewalt Mitre Saw. Pop the bag off the adapter, slide this on and connect a 2.25" hose. Done.

Pobrania
41
Polubienia
4
Ocena
0
P
Printableszaxximus

ShopVac Caster Adapter

The original four casters on my ShopVac rolling base were low quality and one of mine had broken after “light” use. I had a set of five office chair casters left over from upgrading my original office chair casters to premium…

Pobrania
41
Polubienia
6
Ocena
0
P
PrintablesBetawolf

Shopvac attachment Worx WX822.9 Sander

I love my Worx sander ‘mouse’ and normally use it outside the house where a little dust bothers nobody. But now I have to sand the doorframes in my house and I don't want to cover everything in plastic, so I created this attachment to…

Pobrania
39
Polubienia
2
Ocena
0
P
PrintablesThyn

Festool Shopvac China Cyclone Hose Adaptors

This is a set of two hose and pipe adaptors to attach a China cyclone (from eBay) to a Festool shopvac (in my case, a CTL Mini (up to 2018)). This also includes a set of attachment parts to mount something onto a systainer or a shopvac…

Pobrania
39
Polubienia
14
Ocena
0
P
PrintablesFastballPrints

Dewalt Jobsite saw to shopvac adapter

Dewalt Jobsite Table saw to Dewalt 8 Gallon ShopVac Model DXV08SA.

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesJohn

Shopvac Filter Lid

This is a lid for the bottom of a shop vac filter 90304 . My shop vac only came with the wet/dry filter, and when I bought a replacement dry-only filter (90304) I noticed I needed the lid to completely seal up the bottom of the filter…

Pobrania
37
Polubienia
1
Ocena
0
P
PrintablesPaolo

Suction Nozzle for https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc

Thanks to @PeterH for his "SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH" and accessories. Using the same principle I made this suction nozzle so I can quickly disconnect the suction from the dust shoe and connect it to the…

Pobrania
37
Polubienia
9
Ocena
4
P
Printablesvr6syncro

Scheppach DP18 Vario - CamLOCK SHOPVAC to Flexible Hose Link

Sadly no better Images at the moment. But if you own the Machine you will know what it is for. Links to the other Models you need: https://www.printables.com/de/model/338478-flexible-hose-link-fusion-360…

Pobrania
37
Polubienia
2
Ocena
0
P
PrintablesBrent Longpre

Saw to ShopVac Adapter

Inside dimensions are 1-1/2" on the small end and 2-1/4" on the large end. I printed this in PETG with 3 perimeters and it seems to be quite strong.

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesBN

Gex 40-150 Shopvac Camlock Adapter

Reemix of the sander vacuum hose adapter for the GEX 40-150 Bosch by Vicente Adauy to fit the universeral Shopvac Camlock coupling by @ Peter H :…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesTobbii

Nozzle for SHOPVAC System

I designed a nozzle. This can also be shortened to increase the cross section.

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesTobbii

SHOPVAC adapter Einhell TE-CS 18/190 Li BL - Solo

TE-CS 18/190 Li BL - Solo Handkreissäge

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesSandro Magi

Ryobi Belt Sander Vacuum Adapter to Ridgid Shopvac

This is an adapter for the Ryobi belt sander RYOBI 3 in. x 18 in. model # BE319 to a standard Ridgid shop vac hose. Printed in black ASA, 0.2mm layer height.

Pobrania
34
Polubienia
2
Ocena
0

Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter

Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter 32mm ID /41mm OD ShopVac Vacuum Adapter to Makita LS Sliding Compound Mitre Saw Compatible Model: LS1219 LS1019 LS003GM102

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesFinneas

Domino shopvac adaptor

I wanted the ability to hook my domino up to either my little cordless ryobi shopvac, or my central DC (using the tapered connectors commonly available). Print this standing on the narrower end as pictured , and I used tree supports in…

Pobrania
33
Polubienia
6
Ocena
0
P
Printablesmark mcatee

Rigid 4070 1-7/8" shopvac locking hose end (tug-a-long)

This end is for a Ridgid 4 gallon model 4070 shop vac with 1-7/8" hose, there are likely other ridgid shopvac's that use this 1-7/8" locking hose as well; its also called a Ridgid Tug-A-Long Genuine OEM 31713 1-7/8 hose. The locking end…

Pobrania
32
Polubienia
5
Ocena
0