Fugenglätter/ silicone trowel
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2346
- Polubienia
- 322
- Ocena
- 4,96
1158 modeli
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
Il SiliconeEdge Scraper è il raschietto pratico e resistente, progettato per rimuovere facilmente il silicone in eccesso da spigoli e angoli. Grazie alla sua punta a V di precisione , elimina il sigillante senza danneggiare le superfici,…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
This Silicone Tube/Cartridge Cap was born out of necessity when my brother asked for something to keep their silicone and sealant tubes from drying out during their construction project. The cap features rounded edges for a better grip…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Cap for silicone cartridges or simlar, with S15x2.5 thread.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summary Silicone/Putty cap for keeping the putty usable for longer period of time. Tolerances are tunned for my Prusa Mini. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand: Sunlu Filament color: Silver…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Summary Silicone/Putty cap that I am using to store nozzle and keep the putty usable for longer period of time. Tolerances are tunned for my Prusa Mini. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand:…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This mould is created to make silicone socks for the Prusa Mini. Silicone Sock V2, Prusa Mini is optimised as much as possible. Instead of the standard approach using long m3 screws, the mould is closed with a simple clamp or vise. What…
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
New molds, much better: https://www.printables.com/model/1185152-new-better-crucible-molds-for-microwave-metal-melt There are 2 different size molds. I print them in PLA 20% infill. The Lid and inside cups should be printed @0.16 mm layer…
Wydruk około 15,10 €–18,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Have you misplaced your silicone nozzle cap? Maybe you just didn't get it in the package (like in my case)? Well, here you go! It's the perfect length and taper for the nozzle. The threads are modeled so it screws on and off easily! It's…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Standard silicone cartridge nozzles are too wasteful for my taste - you have to push out a great volume of material to fill them and get it going out of the nozzle. Also, there's never one around when you need it, because they're…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
It bothered me that I didn't have an exact overview of the types of silicone I had in the workshop.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very simple design for a ring that keeps your silicone baking mats rolled up. Inner diameter: 28 mm. Print file has 3 rings in one print. No supports needed.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Wanted to use this design with my silicon springs and added handles. Great concept so I chose it. I added a 3mf with the supports on the strain relief so you could see how I did it. Printed on my 2 Aquila's converted to Ender 3 V2's using…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
The original mats of Tefifions were made of a material that unfortunately has not survived the decades well: With another project I have already published a way to print replacement mats, that are fine. Now with this project I provide a…
Wydruk około 1,32 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update June 27th, 2022: In the meantime, I have also found another way of bonding silicone rubber without the chemical treatment trick described here. I have added the description of this alternative at the end of the article. Preface…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Just pour silicon into the mold, then break the mold (When the silicon cures) to remove the Valentines Day 2026 emblem from the mold. Happy Valentines day!
Wydruk około 6,97 €–8,52 € nettoWstępna wycena jednego wariantu
Model To prevent fast dry out of your started silicone/acrylic cartouche print this cap and screw it onto your cartouche. The cap has a conic inside to close the opening better as just a plain cap. Printing instructions I used PLA but…
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
Designed to fit universally on silicone sealant cartridges with an S15 × 2.5 thread , it is a simple and reusable solution for storing partially used cartridges. Features Helps prevent silicone from curing between uses Universal fit for…
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
utile utensile per facilitare la stesura del silicone,si consiglia stampa in TPU
This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…
In Prusaslicer set Vertical sheel perimeter to 5 to get more powerfull tool. Print orientation
I printed mine in PLA, no support and in 0.20 mm
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
Do you need a tool to smooth silicone around pipes to seal any leaks? Or after installing a sanitary fixture? This is the tool you were looking for. This tool features a handle for a comfortable grip and various spatulas with the main…
Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…
Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…
Newer model here - gantry mounted version including nozzle stop to prevent leakage when parked: https://www.printables.com/model/882364-new-version-adjustable-gantry-mounted-nozzle-seal This is a remix of the great design by FunFunBoy…
Silione finishing tool, set of 2. Get those perfect finish silicone corners. Simple tool set, easy print. print 0.2 layer 25% infill material: any [original are made in silicone], but i´ve been using petg and pla, and it works great - if…
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
Add flexibility to your nozzle cleaner,
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Some time ago I found a silicon tube stopper on thingiverse - but it didn't fit tubes sold here (those are 16mm OD of the screw) So I made a new one - but it didn't seal well And then I designed this model, it has space at the bottom (or…
🎯 Silicon PRO 3in1 è lo strumento definitivo per ogni amante del fai-da-te e per i professionisti della sigillatura! Con il suo design ergonomico a freccia e le tre punte intercambiabili, questo accessorio rende ogni lavoro di silicone…
Ergonomic silicone scraper Sometimes I need to replace the silicone around the bathtub, so I used my experience in 3D modeling and created this silicone scraper. The scraper can also be used on the printing plate as a bed scraper !! The…
Stand for MacBook Pro 2021 14 / 16 (M1 Pro, Max ) Upon looking at the sizes for the M2 MacBook Pros, this stand should still work, though I don't have a computer to test it. Printed in PLA 0.2mm Layer height 10% cubic infill No supports…
Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.
The Silicon Spacer mod is intended to help flatten/level the print bed by enabling you to vary the depth of each bed mounted screw in an effort to compensate for variations in manufacturing tolerances. Silicon Spacers found on Amazon…
Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
Simple replacement/disposable nozzle for silicone sealer tubes
Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
I modified the original Decontaminator to use with the Bambulab A1 mini silicon brush, more reliable and robust than the brass brushes. I also modified the bucket to be smaller on the inner side to mount different Wago mounts. All you…
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…
Supplement tool for this: https://forum.prusaprinters.org/forum/user-mods-octoprint-enclosures-nozzles/prusa-mini-silicone-bed-leveling-mod/ When levelling hotbed in this mod, you are asked to tighten screws 426°, -32°, 168° or any other…
Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…
4 Corner : 90° - 16 mm - 10 mm - Radius 16 mm
Silicone caulking nozzle, ribbed for your pleasure, makes (un)screwing fun!
Scraper for removing old silicone. The front cutting angle is 30°, the rear one is 20°. Being made of plastic, the tip may bend, but you can still continue to use it by tilting it further. If you have ideas for a remix or to improve it,…
…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…
OpenSCAD model to simply create a cap with a few measurements. 2025-12-24 update: I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle. Of course you can buy…
This is a 3d printed mold designed based on https://www.printables.com/model/382059-happy-ditto Ditto should be very soft, so I made a 3d printed mold for Ditto and poured silicone into it. I added a little bit of red coloring(for…
This is a Remix of K1C Silicone Nozzle Cleaner Mod adapted to use 2 A1 or A1 mini nozzle brushes I don't have a K1C. I made this mod to test on a K1, and only applied the suggested changes to printer.cfg (see original model comments) YMMV…
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
En mi caso he impreso con PA6-CF a 0,08 de altura de capa y 30mms de velocidad, con un relleno de 15%.
Sealant cartridge cap to conserve your opened cartridges. Fits standard cartridges. Beveled flange and corners for a tighter seal and easier grip. Print upside-down due to the bottom bevel (or sink it into the bed when slicing). Works…
Simple, 3D-printable molds that can be used to cast moulage wounds in silicone. Moulage is the art of applying mock injuries for the purpose of medical simulation training. Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament brand:…
This is an set of profiling tools for forming a smooth surface on silicone sealant. pls comment if you need other sizes.
The box's internal dimensions are 4in diameter by 2in deep. 4 asymmetrical keys allow you to easily line the mold halves up and create a very positive fit, which prevents shifting in any direction. Use binder clips to hold the halves…
Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet. Print the design with higher temperature materials like PETG… ABS, ASA Recommended to print the design laying on the side. Cut 14x17 mm rectangle from 2mm silicon sheet. Insert the…
It is a quickly designed cap for a silicone tube. You may want to scale down .1% for a tighter fit. Update: I was adding a seal with a piece of tape. To improve the design I added a screw mechanism to tighten the tip. I am leaving the…
I developed a mould for silcone sock of nextruder. So far I estimeted the dimensions based on the pictures. The mould is already working. V9 update: - nozzle lenght decreased - open version added (for these version both mould halfs are…
3D-printable molds for silicone casting. Wound packing task trainers are simple educational models that can be used to teach/learn wound packing procedures to stop bleeding. Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament…
My second try on designing a mold for Pokemon. As I look through all Pokemon related models on Printables, I found Gengar very suitable to be made soft and bouncy using silicone. It has two pouring holes (under Gengar's foot), and three…
First of all credits goes to the original design: https://github.com/Midnite3DP/voron-bedpan I slightly changed a lot from this design to have a smooth Bedpan design with cover for my Voron 2.4 (no matter which bed size. Originally I used…
This is a simple mount for a silicone brush to wipe the K1's nozzle with. It mounts to the rear where the plate is attached. See pictures for details. Reuses the same screws. For the brush, you have two options: --- Option 1: Use a…
This thin nozzle tip fits a 3m marine silicone 3 oz (88ml) tube, but will likely fit other tubes (silicone, grease, other sealants, adhesives, etc.) of similar size or shape. The nozzle tip is quite fine (i.e. small outlet diameter) for…
Locking bed leveling knob for the Creality Ender 3 S1/S1 Pro with a cutout for silicon spacers. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally…
Silicone Sealant tube nozzle nozzle cleaner cap with FreeCAD (RT) file. I printed with 5 perimeter and with 0.16 layer height from PLA. Update 2023.12.28: WARNING : not printed and not tested… siloplast_v2.FCStd - can be loaded with stock…
After looking for replacement parts for my K1c brush and not finding them for sale, I decided to look if someone had created one, but they all differ in some way from the original, so I decided to replicate the original myself. Printed on…
Simple tool for applying silicone
This silicone sock mold is used to create socks for the Nextruder hotend, which is used on the MK4 and XL. It consists out of 3 parts, and is easily assembled and put in a clamp to keep it closed. The middle part requires some supports,…
A box to hold your prototyping wire spools, making them organized, In sight and not in way. The original design holds 6 wire spools but I also provided STEP files so that anyone can modify it however they like. For the original version,…
This is a jig used to cut 9mm pieces of silicone tube for use with the Silicone Tube bed leveling mod for Prusa MK3 printers. The mod is described very well here: https://github.com/bbbenji/PMSBLM and here:…
Printable parts for creating silicone mold - cast your own design-ish soaps. Including models in step format for simple remixing. You would need: Soap positive (printable, four designs included) Mold base (printable) Mold shell…
A remix of the model for closing a silicone tube, which is practical, has a more profiled seal and all edges have been r
This is a remodel of the Flipper Zero case. It uses groove to fit flipper zero with its silicone case and also deeper groove for text so it can be easily inserted and printed. Its print with no supports you gonna need 8 M3x20 screws.
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
[Changelog MK2] 20251103 User @CoreyRogers_489647 reported interference with bed issue. Lightly remix to increase clearance. UNTESTED. ----------------------------------------------------------------------------------------- As suggested…
I published a silicon tube stopper with a TPU gasket a few days ago - and that got me thinking, if I make the whole thing out of TPU I won't need the separate gasket part. I made it shorter so you'll be able to tighten it without hitting…
I improved my previous mold that makes silicone Ditto. https://www.printables.com/model/413425-silicone-dittopokemon-mold Improvements: Combined two small holes that are for pouring and air leaking into one very big hole to allow easy…
I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…
Organization of sealent or silicon tubes. Can be extended to hold as many tupes as you want in fusion.
Print this remixed part in place of “Voron Purgee Wiper bracket.stl”. The wiper has an adhesive backing so it should stick directly to this part. You will print the other files from the original model.…
While the original Ball vise is fine for those with a selection of hardware on hand, that's not me. So instead of buying a bunch of bolts and such, I modified the files so everything can be printed, except, of course, the silicon tubing.…
1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…
Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…
After countless tests, I am proud to present the ultimate nozzle wiper design, perfectly tailored for the Anycubic Kobra S1 . This design solves the most common issues: Perfect cleaning thanks to precisely matched dimensions. Eliminates…