289 modeli
The dovetails could use some optimization, but it works. They disable the need for supports when printing. I use 6 balls under my granite slab just to give some extra support in the back since I have my spool on the printer (and I had 2…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Debido a una necesidad específica, creé esta cadena de eslabones que están unidos entre sí por lo que NO permite movilidad adicional a la mostrada en la presentación. Consta de 13 eslabones y un aditamento para ser unido con tornillo a un…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
Objeto de dos partes que unidas forman un eslabón, tiene forma de anillo.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Made a few color slabs for the Prusament Colors I have. So I can quickly glance at what color I want to use for a projec
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
~1:3 scaled down to match the X/Y braillest half page molds.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The SLAB: Silly's Lever Action Blaster. A Talon-fed half-dart lever-action springer. Firing demo: General blaster overview video Firing demo video The SLAB is a lever action, Talon mag fed, half dart springer. Sellers A full list of US…
Pokémon PSA + CGC Card Holder
This is a stand that has been designed to fit PSA sized trading card slabs. It will only fit standard sized slabs, and is a bit oversized to make it easier to insert and remove the slab without scratching it. It will also fit slabs that…
Older model i never Published PLA: Fiberlogy Printer: CE 6 Program: fusion 360, made to protect the PSA slabs, print needs support, slide in carfully (slight presure fit) Enjoy, non comercial
These prints replace SOME of the normal SLAB v4 parts. The rest of the SLAB v4 parts require NO MODIFICATION. The print orientations on these parts are incorrect as imported. Follow the print orientation of the standard Imperial spec…
For assembly information based on the V1 design, watch this video: https://youtu.be/yff5gHApMy0 This new Design cannot use the OEM screen, but works with the new GBA SP IPS screen kits with the either top back plate. Added lower…
Top Loader, Slab, and Singles Card Stand. Redesigned to hold slabs as well as singles and top loaders. check out my other top loader displays. These are only single tier stands to accommodate sellers who sell singles, slabs, and/or using…
Storage box for graded / slabbed coins. It can contain 10 slabbed coins. Printed with PLA, 0.4mm nozzle, 10% infill and 0.2mm layer height. Update 22-11-2024: I've added a 20 slabbed coin container on request as a model.
I designed a simple but effective slab box for 17 slabs. Keeps your graded cards free from sun, moisture and dust. The lid is pressure fit but you could scale it up or down yourself if you dont like the fitment. Printed on a Bambulab P1S…
the slab revolver from ULTRAKILL, i ripped the original model from the game files and made some modifications to it such as adding more details, and putting slots for glow in the dark parts Print Settings Printer Brand: Creality Printer:…
A Slab version of the DS Lite. Uses a macro modded DS system and has an option to use a glass lens or the touchscreen. This design is meant and optimized for SLA printing. FDM or SLS may work, but has been untested for those print…
Remixed rail section for the SLAB that adds a small shroud resembling a heat shield. There is a modified cut out on the right side that allows for the barrel screw on the turnaround to still move forward and you can still manually load…
Skeleton stock for Sillybutts' SLAB. Uses the stock screws normally used for the slab, in addition to two ¼" nuts and bolts (between 25mm and 28mm long, or roughly between 1" and 1-¼" long). You may also try using washers to prevent the…
SLAB Mare's Leg kit- chopped stock pieces and large teardrop lever. Drop-in pieces, no hardware changes necessary. Silly's main SLAB files are found here: https://github.com/Sillybutts/SLAB
After the release of the SLAB, I decided that I might as well try my hand at designing a trigger for something other than the LYNX. This may require support on the underside if printed flat, as there is a raised section for a cosmetic…
A sturdy and simple stand for PG graded slabs
Size 60x85x10mm. For 15-50mm coin or coin in capsule. For Leuchtturm Quadrum capsule. Better print with PETG
Simple wall shelf for displaying PSA slabs that requires no drilling Each rail is 250mm long and holds 3 PSA slabs I printed them vertically so they stayed square Mounted using 3m Command Poster Hanging Strips
Adjustable cheek riser for SLAB. Not ambidextrous- to make left handed, mirror everything except screw lock, locklugs and nut. Extended rail and ported muzzle, too. Only those parts included- for the full blaster by Sillybutts, go to:…
Introducing the HoneyComb Pokémon/TCG PSA Slab Holder, a unique and eye-catching display solution for your prized collectibles! This meticulously crafted slab holder combines functionality with aesthetics, providing a secure and stylish…
Storage box will fit up to 20 PSA graded slabs Front box panel has an attachable (Glued) standard size card frame to slip in a TCG card to distinguish what type of cards are stored inside. bottom of the box comes with an optional PSA…
Dont hurt yourself or others, this thing can go trough a beer can and come out the other side with a foam dart The back of the blaster is the same as a regular slab, you will need to print everything in the front and a lever to fit a 50mm…
This is case bumper for PSA graded slabs. It's fit perfect for PSA slabs and offers excellent shock absorption. They are pulled on like a phone case on the slab. Case have external dimensions: 90x145x11mm. The model can be printed without…
Basic stand that can hold graded cards that have Graded Guard protective cases.
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice 20250607 Update: MuzzleA (1) wrong file, correct version updated This will need two sets of SLAB hardware (12 in barrel) and will need the following additional…
Talon magazine block for nerf blasters that allows easier single loading of a dart in blasters with mag wells that have a right side cutout. I remixed this so I could single load my slab easier and faster. You could probably mirror this…
Just a modified MLOK Handguard to have picatinny.
Quick little box I created in tinkercad to hold 10 graded card slabs.
This holds bots CGC and PSA slabs
PSA slab display with room to accommodate protective sleeve
Display stand for slabbed PCGS coins. Printed with PLA, full infill and 0.2mm layer height.
Print as you would with SillyButt's SLAB parts. The only difference is for the Muzzle A piece, print with the front end on the build plate with supports to build plate only. For the Shroud go here:…
Crests attached to the left arm of Hearslabyul school uniforms. Flat pin back (available online or at your local craft store) is required to attach it to a sleeve. Ribbon is not included. Print in any color/filament type and spray paint…
print at anything from 30% and up use supports prints as one piece
I wanted the windowed magwell made by Palmtopper but their posted files were unfortunately for an older version of the SLAB and are no longer compatible with the latest version of this blaster. In their absence, I took it upon myself to…
A small edit to Hitako's slab mlok handguard to cut it at an angle to make it look better with the default muzzle.
21/05/23 - Updated v2 Keys redesigned, more reliable and less supports needed. Slab mold for your master dice set. 2xM5 screws+nuts or equivalent are needed to clamp the mold walls tight. Use some tape on the bottom to prevent silicone…
slap holder for psa and cgc graded cards
A sturdy-ish stand for your graded cards! Sorry it has been a while since I uploaded. I've been busy lately.
A handguard for the SLAB by Sillybutts. Attaches via 6 of the original screws. M-LOK slots at the bottom and each side allow the attachment of accessories like rails, grips and handstops. June 2nd 2024: Update 1.1 - Slight redesign of the…
This is a center-punch / drill template for the aluminium bars used in the Caliburn 4, Talon Claw 4 and the SLAB. Since i wanted to make the bars for he SLAB myself (importing too expensive), i had to know the exact position for drilling…
Remixed magwell for the SLAB that converts the mag release retention from cord based to be compression spring based. Print following Silly's original recommendations. The original chopped magwell and mag release are designed by and…
I edited the arm from here https://www.thingiverse.com/thing:4745849 for handling better the filament, also avoiding unwanted slip by cutting the slit at 45 degrees. And using the frame clip from https://www.thingiverse.com/thing:4321023…
Want to single load your slab for single shot side load? This is the mag for you. Allows you to prime the blaster, load the dart through the side, chamber the dart, then fire away. This is a remix from Miata's eliminating some dead space…
Charms for Riddle, Ace, Deuce, Cater, and Trey. Models are 65mm in height. scale them smaller for earrings or bracelet charms. Printed with photopolymer resin on an Elegoo Saturn.
Just a simple wall holder for comic slabs, print two and hang them on the wall, slide the slab in sideways. Comic_holder takes 2 screws. Comic_holder_center takes 1 screw Comic_holder_center_wide is for thicker slabs.
This is a drop-in replacement for the Skeleton Stock.stl part, assembly instructions are stated on the SLAB Skeleton Stock page
chamfered some edges and made a larger variation to hold a larger card
Version 4 of my Gameboy SP Slab design. Please choose a set from the zip folder options. A build video can be found on my youtube where I have disabled ads for your viewing pleasure: There are multiple options to choose from in the build,…
Gengar Top Loader, Slab, and Singles Card Stand
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…
Intruduction These ironsights are remixed from the ones included with the files of the SLAB so the sight picture should be identical, if you don't count that the front sight is much further away than it would be on the rail. These were…
Wall (or other surface..) shelves for presenting slabbed (graded) comics, or comics in bag/board. No supports Prints either horizontally or vertically - Horizontally is faster/better 15% infill should be fine M4 countersunk holes
This file contains all of the parts ready to be printed on a bambu printer. I have configured all of the parts with the proper settings, and have built the blaster using these prints! This was printed on the A1 mini in 22 prints. If you…
I originally wanted to print this on its side non-planar with CurviSlicer , but I need more time to get that working. If anyone else does it, please post it here because I think it's a good application. That said, I'm really happy with…
This is a router sled designed to work with these SBR12 rails found on Amazon or many other places online. The sled is specifically designed to work with the holes in the base of Makita's trim routers. You can find the legs for this jig…
This is a grip sleeve that is exactly molded for the Lever_Big file option for Silly's SLAB. IMPORTANT: It will not work with the other levers. Print in TPU with 3-4 walls and 10% gyroid infill. It will act as a natural compression for…
I measured the existing transfer bar and added some volume to fill in some empty space. I added the hex pattern for the look. Still testing but seems to be strong enough so far.
Very simple alteration of the original files to add more tactics to the slab. I used this model by sigstoat for the rail parts and made the dartholders myself in fusion360. The slab files are from sillybutt's github page The picatinny…
Just a skinnier Trivictus SCAR.
My early 2015 Retina MacBook Pro (13 inch) still works great, but the display broke. Instead of getting a replacement display, I went the cheaper route to attach an external monitor and use it as a desktop computer for my kid. Some call…
This is a center-punch / drill template for the aluminium bars used in the Caliburn 4 , Talon Claw 4 and the SLAB . Since i wanted to make the bars for he SLAB myself (importing too expensive), i had to know the exact position for…
I remixed Xipher's Slab to include some additional features such as: USB-C charge port cutout AGS-101 compatibility GBC/GBP button compatibility DMG speaker grille cutout You'll also be able to find some Gundam themed buttons on my page…
This requires your choice of supports. I use tree supports only touching build plate for best results. This is for the SLAB by SillyButts, a lever-action nerf blaster. This just adds the classic N-Strike Barrel Lug from older Nerf…
My Original Prusa Enclosure had a bit of echo when printing so I wanted to try the concrete patio slab/paver ‘mod’ to quiet things down and it seems to help. I already had a 45x45cm concrete patio slab/paver that I was using before I got…
this is a pokemon case when you get a card graded fits: PSA CGC BGS ACE i would recommend using tpu but pla works perfectly fine
I found that rod activating the trigger was bending out instead of moving forward with the original pusher. Added ~4mm of width to the pusher ad sliced off a bit at the top. With this I get a smooth and reliable trigger operation.
I think quivers look tacticool on real steel, so I decided to add one to the SLAB Skeleton stock, the most tacticool stock. I designed the quiver portion myself and used the cheek rest from the Skeleton stock for mounting. I included a…
Here is a collection of parts I modded/created to add to my slab. All components are 100% compatible w/ the base blaster
In the out of darts build video I have seen that they are using a rod cap with a threaded insert. Unfortunately I could not find it in the source files, so I remixed it. M5 Threaded Inserts on Amazon
CGC Comic Slab Wall Slide Mount You need to print 2 wall mounts, and optionally 2 spacers, and the drill template. Slotted holes are 3mm spaced, so M4 wood screw (or similar size) will work. I recommend wall anchors unless lined up with a…
Made for slab rocks to display, can be used for other things I'm sure as well
These are 3d printable versions of the priming bars for the metric version of the SLAB . These were designed to fit the Ender 3 printbed (and probably a Prusa 3? If not let me know). The short one required no modification since you can…
This is my very first design in any CAD program and also very new to the printing game. Please let me know what you think in the comments and let me know if there are some improvements you would like to see.
Instructions : Print at 0.2mm with 0% infill. Companion Collections : DesignCraft Building Blocks: https://www.printables.com/model/545645 Textured Slabs: You're Here! Windows & Panes: https://www.printables.com/model/545696 Doors:…
I redesigend Silly's stock parts to enable a print orientation, in which layer lines are super smooth. 100% compatible.
A round trigger for the SLAB. Prints the same, installs the same, works the same. It just feels better in my hand. Leave any questions in the comments and happy printing!
A jig for cutting horizontal slices from a slab of clay. One side has .25" spacing and the opposite side has .375" spacing. Print 2x and use a wire across the slots in the print to cut the slab.
NOTE: This can be a dangerous item to assemble. You must be familiar with using Li-ion batteries safely as well as how to solder. Proceed at your own risk! Want to build your own small smoke machine for your HasLab Ghostbusters Ghost Trap…
Charmander Top Loader, Slab, and Singles Card Stand
These couplers are intended to reduce vibration of the K1 Max during printing, and the table on which it sits, in 2 ways: Increase the mass of the table on which the printer sits Couple the printer to the mass of the table on which it…
The MLOK handguard looks awesome but isn't the best for priming as you need to really squeeze it. The easy solution would be an MLOK handstop but real MLOK accessories don't fit. To address this, I merged the handstop with the handguard.…
Fantasy Altar Slab Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Fantasy Items here: https://www.printables.com/@StudioMechanik/collections/2975356
Stock, Handguard and other parts for the SBS SLAB. Also a bunch of info to make your own, listed in random order. -Only 2 c4 and t4 bars are required for assembly. 2 12 inch threaded rods (10-24 or 10-32) are used. -The pins for the…
Beckett slab bumper 50 minute print time. Print in PLA if you print please leave a review and like
Downhill longboard Riptide Slab inspired footstop. For best results, print in TPU. Use 15 to 16mm washers on top and bottom for mounting.
General idea Placing a 40x40x4 concrete slab under your 3D-printer significantly reduces noise/vibration transferred to the enclosure. Placing the slab on top of the LACK table causes reduced height needed for the printer PRUSA MK3S+ with…
This is a remix of Corvus's Ontos iron sights with the SLAB 's iron sight geometry. Though this is intended for use on the Ontos, nothing is stopping you from putting it anywhere else you want to. Like the original's, you can also use…
Print 2 pins and one rail.
EN: Safe and easy laying with this Tile Spacer. Allows easy a symmetrical joint pattern. With the correct laying and choice of dimensions, an optimal drainage and protects against edge flaking. Consumption: Approx. 7 pcs./sqm (plate size…
I randomly found myself wishing that the SLAB had a ball detent system like many of SillyButts' other blasters(Not like it would be that useful, your hand keeps it closed already), but I realized that magnets are way easier. So this model…
A minimal frame and stand for graded trading card slabs with a precise, secure fit and no added bulk. Currently supports PSA-sized slabs only. Additional slab types will be added later. Tested Print Settings PLA 0.4 mm nozzle 5% infill No…
It is done with 0.1 mm layer height and fuzzy skin only outside faces. Does not need supports or raft.
