258 modeli
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
An issue with the Qidi Q2 is that the internal PTFE filament tube rubs against the underside of the glass lid. Even worse, it scrapes across the screw heads which hold the lid's handle in place. A common solution is to print a riser for…
I used blender to make the original model more like actual dogs (and especially my own). Smaller snout, less pronounced eyebrows, thinner paws and legs, more wavy hair on the back. That's most of the changes I made. I printed mine small…
This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…
This is a remix of Wire Splice Mold by t2pain2 on Thingiverse https://www.thingiverse.com/thing:6316585 Changes from the original: - Split into two models for easier slicer arrangement. - Re-scaled to properly fit 14AWG wire without…
I loved this modified Universal Spool Roller from thingiverse, https://www.thingiverse.com/thing:2844943 , but I needed to make it wider for a few rolls I have that don't fit on it and since it didn't have a STEP file I just made my own.…
Make sure to check out my updated remix that integrates Neebick's stand! Remix of JordanK's design because I was still having trouble squeezing the cable into the box while still being able to close the lid. Increased the external height…
This is a remix of LtDan's printable trumpet, with just a few modifications. I've reworked the tops of the valves to give them screw-on caps, which are themselves designed to be printed in two parts (brass/gold, and white), so that you…
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…
Jedná se o mírně upravenou kabelovou sponu pro výlisky PRUSA, kterou najdete v sadě tiskáren MK4. Neříkám, že původní klip neslouží dobře, ale někdy je pro mě těžké s ním manipulovat. Překreslil jsem tedy díl podle původního dílu ze…
Just some minor improvements. See summary
The Slightly Over Engineered gang of garbage bag holders might be nicer but this one is mine. Two 60 mm holes. Select 0.4 or 0.6 mm version based on your nozzle. Throw it into slicer. Set one or two perimeters and 20 % infill. Print.
Sturdy pull handle, ideal for pulling the sled when the little ones are sitting on it. An 8mm boat rope is suitable as a pull rope. Can also be used with thicker gloves. Printed with 50% infill, otherwise Prusa default settings for PETG…
A simple Tinkercad-remix of RostaP's shelf #2 that I created to fit the Tello G1CH battery charging hub and other that require just a tiny bit more depth. I didn't change/fix anything; the model has the same bridging on the second layer…
I added a chamfer at the bottom and also added some thickness, for a sturdier print. Inner diameter: 17.4 cm.
Prints exactly the same as the original, it's just taller :)
The original works great! And as much as I love a good Sketchup model I personally wanted one with a few less faces so I imported it into fusion and remade it, feel free to modify it further, but keep in mind it was quick ;)
This candle mold was made slightly conical, so that it is easier to remove the candle. It's better to print it with 100% infill in the bottom and 25% higher up. Wax melts at around 45°C - 60°C and and PLA becomes soft at around 60°C-80°C…
slightly MAD is my version of MAD system for BIQU H2. Updates: 26.02.26: - Added the "Slightly_MAD_Mounting_Plate_MAD_Ender_3V2_universal" that should be compatible with different revisions of the X-Carriage bracket on Ender 3 V2 -…
This is a remix of @MaxTs Slightly Over Engineered Trash Bag Roll Holder with additional door hooks that allow the holder to attach to any standard Ikea kitchen closet door without any glue or screws. The door hook's inner dimension is…
Welcome to my slightly overengineered soap bubble wand called “ THE BLACK HORNET p1 ” (approx 10cm diameter) ( Please refer also to “THE BLACK HORNET p2” which is an addition to this). This soap bubble wand came to life by a request of…
Printed vertically, without supports.
Ikea Samla Clip (slightly firmer hold) German: Wir haben einige SAMLA Boxen von IKEA mit dazugehörigen Deckeln bei uns zu Hause. Leider kann man die Verschlussclips dafür zurzeit nicht mehr bei IKEA kaufen. Daher habe ich eine…
https://www.buymeacoffee.com/maxt ---------------------- Print with 3-5 walls, 30% infill, fuzzy skin for better grip (0.8 point distance, 0.3 thickness) This Fridge Handle represents a robust and ultra-durable refrigerator handle ,…
The original has people complaining that the hooks are really easy to break; I changed a few things to address that: I filled in the hooks to be solid. The original was the same as the injection molded version, and the walls were very…
No supports needed. Printed on i3 mk3s+ in Prusament Galaxy Purple @ 0.2 mm layer height.
I had no problems with it coming apart after I increase the length by 0.70mm. Here is a before and after photo.
Recently I saw some very strange three blader like this in the "World of Boomerang" group on FB, so here's my interpretation of that. How I Designed This Made in Onshape. Have a look at the document to see how it was constructed.
Distance between motherboard holes in slightly increase to match BTT drawing and right-side bracket is added with correctly inverted "Kraken" text.
This is my version of a mechanical switch for wooden track trains. Some may call it over engineered, but that's what I was asked for ;-) The tolerances of the connectors are quite loose, so it should work with most of the wooden track…
Found that the file provided by Midyew 59 was a little too tight to get onto my Bug-a-Salt v3, so I resized it by splitting it down the middle of the arch (above the safety) and extended it by 1.5 mm.
I made a wide version of the heater extension (and some remixes) of the (Un)Original Prusa Drybox. It is largely to help folks add various hardware and have an easier time at wiring. It is also built to optimize for arbitrary extensions.…
Fusion 360 file provided so you can make edits, apologies for how unoptimized it may be. have fun EDIT* I also made it in solidworks. Yea i bought a solidworks license so i could learn solidworks. i want to get hired and they may want me…
Requires a LED E27 and an E27 socket. Printed in Petg, 0.20 mm, black and transprent.
I extended the back prongs by 5mm, and the front by 0.5mm to make the stand more secure. I also created a version with no logo.
I needed a longer arm so I can have filament not tensioned so much as with a short arm.
This is a remix of the "Honeycomb Bowl plus others with different shaped holes" by @Shmoee. I was looking for a stylish design to use on my hallway, near the entrance, where we can keep our cars/house keys, something not boring and I…
The original model is almost perfect. But I have encountered that sometimes the filament binds a bit at the entrance to the channel. This has not caused me any problems so far, but to completely eliminate their possibility, I made…
Transform the Olpe Vase into a RGB desk lamp! What you need: wemos D1 mini micro usb cable (optional charger) ledring with 16 ws2812 (68mm outer diameter, 54 mm inner diameter)…
Since I had played with a gimbal mount lately I though some kind of handle would be nice, and that reminded me of control sticks on a game controller or remote control, and of fidget joysticks - so I added a spring and this is the result.…
This design is brilliant, but I was having some issues with the fit in my particular caliper. Changes made: Switch part made thicker (to help prevent it from getting lodged between the plastic body of the caliper and the circuit board)…
I really enjoy the toolhead clip modeled by @LemonyFreshne_104501, but for some unknown reason I prefer to have the clip oriented vertically. The original doesn't have enough pins to accommodate all of the holes on the side of the…
Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame (Speedybee Master 5 V2) but was too tight to rest under the arms…
This model includes a couple of tweaks from the excellent original. My d20s were jumping the rails so I made them about half-again as tall. I also felt it looked just a bit plain next to the Tardis model, so I added a subtle brick…
The original model was just a smidge too wide for my printer. I modded it in Tinkercad. Now it fits perfectly.
this is a REMIX and NOT my own design. Original here: https://www.printables.com/model/1034404-card-slinger-30-for-mtg-manabox-app-for-sleeved-an the original is not allowed to be modified nor to be sold - so ni respect to the original…
Makeup organizer slightly bigger
Skadis holder for Wera Kraftform Screwdrivers Remake with slightly less tight fit. Original designer is koldo19
This is my remix of Maple Leaf Makers Modesty Mesh for my Voron V0. The two key changes I've made are: It has a thicker border to them from bowing once installed. The clips are offset to allow running wires between the chamber and the…
Added small cylinder on the end of fastener to improve keeping it closed. It just works better. Printed with PETG. However more work is needed to make the whole item more rigid and easy to clean.
Unfortunately accessories are no longer available for my small lathe as it was last sold at least 20 years ago. It is a pre-China French made Minilor TR1 which was sold like todays Chinese models in different colors under different names…
I simply edited the teeth to be longer and facing back and smoothed the model Updated 7/22/26 7:58pm Made a wider lower jaw as an option Updated 8/13/26 6:27pm Fixed up the teeth and made some parts of the skull top thicker so that it…
First and foremost thank nateb16 for creating this great filter for Voron. I designed a lid to suit my Voron 2.4 with standard size bed gap along with slightly different housing which is a divider in the middle for active carbon section…
Increased the size to fit a desk with a thickness of 60mm.
Printed with FLEX Semisoft TPU A85 from extrudr (SKU: 9010241122028 ) on BambuLab A1mini. Printed on Bambu 3D Effect Plate (Carbon Fiber)
This model is compatible with the lego system.
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
Solution is same as difficult version, but there are additional dead-ends for slightly harder path-finding (added dead-ends are highlighted in blue on second image) 3 case sizes, similar to basic version, but with core with fingernail…
You liked my other spool roller but you need even more width? Got you fam. Additional 20mm of goodness for those even wider 3kg spools. Print in whatever material you enjoy and it needs 4x 608 bearings without any other hardware. Print…
A modified 3-gang wall plate I modeled from a standard one so it would fit on my wall where the trim is a bit too close, so a standard plate would not fit and look good at the same time Note that you should follow all building and…
I just didn't fancy doing inlays, messing about with magnets, etc. It's the right thing for me, but YMMV.
200x200mm light skadis board made by grafit.xyz with two small changes making it more stable when its on wall. First is vertical lines making it more rigid and support attachments/hooks that need to lean on board and second is small…
I made these to print out as Halloween decorations to put on my garage doors/walls. They all fit on a 256 build plate.
I got tired of the constantly scuffed fingers or dropped inbus wrench, so I designed my own slightly overengeneered model of the inbus wrench handle (allankey). The primary goal was to make the handle grip well and also offer reasonable…
This holder should hold any phone + case combo not much thicker than 1 cm. This is my first time trying to design something thats print in place, so feedback is welcome. I might extend the base in the future to make it more adjustable.
Easy Print, No supports - Voron logo on top :) “If you ever design and share something, please allow people to enhance it, share the step file”
How about a fancy pendant? How about a cookie? Go for it. Here it is: A slightly oversized cookie. Choose your cookie chips in any colour. Chocolate cookie with white chocolate? Cinnamon cookie with chocolate chips. Or a funky red cookie…
I don't own the game myself, but a friend of mine told me that the box needs a bit more headroom if you sleeve the cards. Since the model of @LambertW_371596 is very nice and clean, I decided to remix it, only altering the height for both…
UPDATE: Considering the comment provided below, I decided to redesign a bit to increase clearance between the extruder and the spool holder. The new version can be found here: https://www.thingiverse.com/thing:2904072 or here:…
I did reconstruct the the catan base tiles from https://www.thingiverse.com/thing:2525047 as the model had minor issues. The magnet holders are now symmetrical and the model has fewer issues. Otherwise the model should be identical
Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…
I printed a center plate, and an original end plate to start. I placed them both in my Vesken Cart and held the center plate in place. Then I relocated the end plate to the other end, and measured the gap between the two parts. For me it…
Jigsaw blade holder for slightly larger jigsaw blades remixed from a great original design. Thanks to the original creator! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Detailed sword / slightly broken / broken Enjoy
Detailed Warrior slightly broken helmet Enjoy
This is a remix of the original. The original cup drain holder was not large enough to fit the Tide detergent cups we use. I used the original designer's step file to create a larger drain area. All print requirements match the original…
Made the fire single sided, so that they can be printed with the back side on the build plate, and updated the base to match. Also fixed some some geometry issues on the fire, and dog. Easier-to-print table and cup can be found here:…
I needed a new cover for my X axis pulley. I changed stepper motor and ended up with a taller pulley that interfered with the X end stop switch on the cover I was using. With that in mind this cover had to accomplish a few things: Provide…
Mix and match compartments into the 6 sectors of this pencil cup (including double and triple sector compartments). There are also sectors with hedgehog-style pen slots to the side or some with compartments for small parts. The “slightly…
I split the original model vertically along the X axis, so I had one row. I duplicated that single row (twice) and then merged the 3 rows at slightly different heights, and added end supports. I also gave a bit more separation between the…
Detailed longsword / slightly broken / broken
The idea After I've seen the ‘Week Pill Case’ ( printables/104287-week-pill-case ) I decided to design my own version of it. I needed one with three compartments per day, and an extra compartment for some headache pills would be nice. I…
I wanted a heat-set insert press, but couldn't find any that matched my requirements: Used as few “special” hardware bits and bobs as possible. Be as compact as possible. I don't have lots of storage room, so something compact, but easily…
Detailed Slightly broken Sparta fantasy helmet Enjoy
Loved the simple and solid design that Mulilla made, but I found that the left locking tab was very delicate. I replaced the tab with a thicker tab, without the locking knob. The locking function isn't needed anyhow and now the tab is…
Derrived from the original, adapted for the thick Clear Case, and added removed some material where the vent would go, so it can be used while clipped/mounted. I also added 4 Honeycomb Wall Storage Inserts for compatibility. There are 4…
You will need: 3x 608 skateboard bearings 2x M8-1.25 x 40mm Socket head cap screws 1x M8-1.25 nut (preferably nylock) 3x Either M6 30mm button head bolts or 1/4-20 x 1.25" button head bolts 3x Either M6 nuts or 1/4-20 nuts (preferably…
This is Gospel's Knitting Needle & Crochet Hook Organizer. I was worried the base bridges would turn out rough without support, so I added an 8mm fillet and thickened the bottom plate 3mm. That should also add weight for stability. Print…
detailed slightly broken viking helmet
With two cats at home, i have to remove a lot of fluffy cat fur from clothing and furniture. All the cheap lint roller you can buy, brake under such an extensive use. They wobble, wabble and break after a while so i designed my own…
I took the original one and tweaked around the measurments in tinkercad and now it more snuggly fits because for me the original model was a little too loose. Also print in place with support and adhesion 15% infill worked fine for me
I wanted to learn CAD with Onshape, so I modeled a sink plug. The lids are interchangeable, so you can change them every day of the week. You will need: 1x countersunk M5x(30? depends on your sink) screw. Preferably stainless steel. 2x M5…
![Velociraptor Skull (Smoother + slightly updated teeth + new jaw) [REMIX]](https://media.printables.com/media/prints/56f43609-7425-4d29-9528-c5d8a1715984/images/13569187_949ea601-ff4a-4e20-94c0-7c95246b92d6_043ddad3-94df-4c65-8fc9-a64e838bbff4/screenshot-2026-08-13-182037.png)
