Wyniki wyszukiwania: smaller

Sortowanie

976 modeli

P
PrintablesHarms3D

Tissue Box Cover (smaller, square) #2 - curved Stone Pattern

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…

Wydruk około 13,77 €–16,83 € nettoWstępna wycena jednego wariantu

Pobrania
922
Polubienia
183
Ocena
4,92
P
Printables3Dprintfun

Silica Gel Box For Smaller Beads

I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel.…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
657
Polubienia
145
Ocena
5
P
PrintablesMavagoodtime

Vectra C & Saab 93 Recirculation Servo Unit Smaller White Cog

Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…

Pobrania
172
Polubienia
19
Ocena
0
P
Printablesbenedikt314159

Bin filler and dispenser for smaller parts, especially for WAGO clamps

Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…

Wydruk około 8,74 €–10,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
147
Polubienia
128
Ocena
0
P
PrintablesMichal K

SWEDISH BIRDHOUSE walls to fit smaller printers

I was not able to print the walls parts on my Prusa MK3S+ . The original author, PurchenZuPoden was so nice that he has included the STP files, so after few minutes in CATIA the walls separation was done. No need to glue all the parts…

Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
76
Polubienia
14
Ocena
5
P
Printables3DCatt

halloween pumpkin earrings thinner and smaller

the g-code has the proper height of layer for the manual color change

Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
14
Ocena
5
P

Fidgit - Magnetic 34 x 60 Smaller Hex

This fidget is smaller than my similar larger fidget. This one fits more easily in your pocket. Carry several in your pocket and pass them to friends or anyone you meet. It compresses with your finger or thumb and returns to the extended…

Pobrania
56
Polubienia
3
Ocena
0
P
Printableslukakovacica

Smaller Trays for Hilti Consumable Case v0.1.8

Smaller Trays for Hilti Consumable Case Fully configurable OpenSCAD model for smaller trays, compatible with the Hilti Consumable Case (part number 2195565). Printing guidelines Setup OpenSCAD and export the stl file (optional) Optionally…

Wydruk około 12,36 €–15,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
56
Polubienia
5
Ocena
0
P
PrintablesMatej Vajnar

Fiat 500e key enclosure smaller version

Remixed version of Fiat 500e key enclosure by Helmut Steinberger

Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu

Pobrania
40
Polubienia
2
Ocena
0
P

iPhoneMountForCar(Smaller)

I found the iPhone maps more reliable than the cars' maps. I mounted it easily in an older Ford Explorer and in a Lexus ES350. It needs a ledge about 1 - 1-½" thick x 5+ " deep. A bolt in the top can be tightened to secure it to the…

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
8
Ocena
0
P
Printablesnbost

Terraforming Mars: Ares Expedition Smaller Card Tray for Unsleeved Cards - Retail base game

Retail version of the base game doesn't have enough room for the large card holder. Resized to fit unsleeved cards and to take up less room in the box.

Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesNewTeq

PrusaXL: Smaller telescopic spoolholder slider (for Das Filament and other Master spools)

Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesJ Marin

Articulated Spirit Dragon Fixed (0.6mm and smaller)

Fixed some issues where it was fusing in the last few vertebrae Will print well with 0.6 or smaller (not sure for 8mm ) Simple remix/remake/Fix of the original model made by sunset Guarantee no fused vertebras (unless your printer is not…

Pobrania
4102
Polubienia
262
Ocena
4,85
P
PrintablesSD-3D

Bag Coat Hanger (Smaller Hook)

I designed this as the final version of my Coat Hanger Hook collection. Even though my previous two versions were extremely well received, there were a few requests for a smaller version as not all bags could fit over the hook profile.…

Pobrania
3598
Polubienia
836
Ocena
4,84
P
PrintablesGinger Saw

Honeycomb Storage wall: Smaller Honeycomb

177x190 honeycomb section, fits on Ender 3/5 beds. Should still tesselate properly.

Pobrania
3354
Polubienia
352
Ocena
4,86
P
PrintablesShmoee

Mini Infinity Cube (13.3mm cube segments and smaller possible)

I printed the 16mm version of Waveman's sturdy infinity cube (thanks for sharing!) https://www.printables.com/model/88525-sturdy-infinity-cube but I discovered that it was fused just enough that I needed pliers to free the blocks (and…

Pobrania
1624
Polubienia
51
Ocena
5
P
PrintablesDrKronos

Smaller Print-in-place Massage Roller

Easy to print and use, no glue required to assemble. Bigger Version Printing in PLA, 8 to 10% infill should be enough. Do not use a brim or raft.

Pobrania
1567
Polubienia
237
Ocena
4,96
P
PrintablesLordWiggle

Creality CFS lid clip for smaller spools to prevent retraction errors (SUNLU spools and others upon request)

They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…

Pobrania
1537
Polubienia
145
Ocena
5
P
PrintablesPrint-Head

SMALLER Organizer for USB cables & chargers EU/US/UK - 5 slots | REMIX

SMALLER Organizer for USB cables and chargers - 5 slots | REMIX 5 slots instead of 10 | +1.5cm-version | rounded edges | EU/US/UK Charger versions note: Reduced the slots from 10 to 5 and rounded some edges. Also there is an additional…

Pobrania
1466
Polubienia
553
Ocena
5
P
Printablespcpopper

Gridfinity baseplates for IKEA Alex (skinny) for smaller printers

I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.

Pobrania
1330
Polubienia
202
Ocena
4,94
P
Printableskrisvda

Triple & quadruple gravity broom holder + gear for smaller diameter broom sticks

A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…

Pobrania
1236
Polubienia
164
Ocena
4,81
P
PrintablesRepoholy

Smaller IKEA SKADIS stand (optimized for Prusa Mini)

I love the IKEA SKADIS concept and wanted to use it on my desk and my childrens desks. I like original concept from Casta brico , which is simple and functional, but I needed to modify it for printing on the Prusa Mini printer. Whether…

Pobrania
1233
Polubienia
457
Ocena
4,71
P
PrintablesDazza

Smaller Hobbit House Model Bag End Lord of the Rings LOTR Shire

Print your own Hobbit house. Please publish your makes. Check out my larger Hobbit house:

Pobrania
1217
Polubienia
455
Ocena
5
P
PrintablesDavid McIntosh

Flashforge Adventurer 5M (AD5M) - drag chain termination at hotend - Smaller Profile Remix

Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.

Pobrania
1138
Polubienia
114
Ocena
5
P
PrintablesJelle

Spray can trigger for smaller caps

The handle should now work for cans with smaller caps, such as this one. Have fun with it and please share your makes :)

Pobrania
927
Polubienia
58
Ocena
5
P
Printablesomarelzuhry

Batman Cowl Remix - Smaller Printers

This is a wearable Batman Cowl Split into 12 piece with built in locator pins included on each piece. Fits on smaller printers. Play around with your part's placement on the bed for the most cost effective results. Each part is labeled…

Pobrania
899
Polubienia
150
Ocena
3
P
PrintablesMarcus24

100% Printable Nipple Clamp - smaller

1cm shorter body and spindel for nipple clamp published by Tomas and RiverCharlie https://www.printables.com/model/413562-100-printable-clamp-not-only-for-nipples…

Pobrania
888
Polubienia
102
Ocena
4
P
PrintablesMici

DUMMY 13 - rifle hands (for big and smaller rifles)

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Two simple hands so that DUMMY 13 can hold a rifle realistically.

Pobrania
886
Polubienia
213
Ocena
5
P
PrintablesTerrain4Print

Smaller fantasy viking house

House This house is smaller than my first: http://www.thingiverse.com/thing:1688195 It is also not modular but instead easier to print and assemble, being only two parts. You get to choose if you want a chimney or not.…

Pobrania
838
Polubienia
186
Ocena
5
P
PrintablesPhil Asdf

gpu support bracket (smaller version)

Height should be adjustable between roughly 60-80mm. I also changed the magnet slot to fit a 6*3mm(d*h) Magnet. Also the top part was modified a bit to be just round, i didnt like the “spikes” on that part. I also included a locknut, but…

Pobrania
779
Polubienia
101
Ocena
4,5
P
PrintablesRafael

Smaller Pot for Modular Hydroponic Tower

I don't think there is a need for such a complex Pot in the Modular Hydroponic Tower. In fact I prefer a more minimalist design. I simply cut of the last part of the Pot. As a result now 9 pots can be printed in one build plate, and I…

Pobrania
751
Polubienia
127
Ocena
4,75
P
PrintablesSunShine

Smaller Chainmail Wallet!

After my last upload ( https://www.thingiverse.com/thing:3175533 ) I have decided to improve the design, and make it avaliable in some smaller sizes; -The smallest coin purse is smaller than a standard sized credit card, perfect for…

Pobrania
720
Polubienia
156
Ocena
4,43
P
PrintablesMiklas

desiccant bin for Qidi Box "with smaller holes"

Improved Qidi Box Desiccant Bin – Reduced Hole Size + 3 Variants This is my remix of the awesome silica gel holder originally designed by @R985_3546396 . His model works great and fits perfectly in the Qidi Box — but after printing it, I…

Pobrania
711
Polubienia
66
Ocena
5
P
PrintablesAna

How big are your rolls? – smaller remix 35mm Wrapping Paper Cutter #11 blade

Made a smaller version of the wrapping paper cutter, the original one was comically large on my flimsy wrapping paper Should have but didn't fix the weak point in the print, maybe in the next iteration :P

Pobrania
704
Polubienia
101
Ocena
4,71
P
Printablesswiss_beluga

FPV-Rover V2.0 - larger motors, smaller fpv camera setup

I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking. Things I have changed: -inner_frame_left and inner_frame_right: I deleted the venting openings. These pieces are now much sturdier. -motor mount:…

Pobrania
698
Polubienia
148
Ocena
0
P
PrintablesIsItBrokenYet

Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.

Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…

Pobrania
679
Polubienia
80
Ocena
5
P
Printablesidesire90

IKEA 365+ Drybox Spoolholder (also for smaller Printers)

>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…

Pobrania
614
Polubienia
98
Ocena
5
P
PrintablesNeokil

Fantasy Tavern 1 - Split for smaller printers

This is just the beautiful model of a tavern split up to fit smaller printers. So on my 222x222mm printer those print beautifully. Since cura had some issues with the big stl-size of the roof-2 and roof-3 there are also .obj files which…

Pobrania
569
Polubienia
113
Ocena
5
P
PrintablesSerenitee

Smaller Jack - Remix with Rail Closure

An even smaller jack ( Mini Jack ) is now posted with 4 faces and a reworked rail to remove the small ‘tag’ that may break off of pumpkin shaping). This is a remix of thjelmfelt's Jack O'Lantern with snap on faces , but only 1 face (so…

Pobrania
552
Polubienia
162
Ocena
4,4
P
PrintablesVariable

Smaller arm for the Flexible & sturdy phone arm

I wanted to have a shorter arm length and maximize the Prusa Mini's print volume so I shortened the original arm. I printed it with Overture Matte Black PLA with supports on the build plate only.

Pobrania
543
Polubienia
70
Ocena
5
P
PrintablesKempy

Smaller SpaceMouse with Hall Effect Joysticks, PCB Wiring and BALLS OF STEEL!

Having ball bearings running in metal sleeves results in a smooth action and a more compact SpaceMouse. Hall effect joysticks eliminate dead zones and enable much finer control. The only issue you need to be aware of is manufacturing…

Pobrania
532
Polubienia
159
Ocena
5
P
PrintablesGetahobbie

Hex wall - smaller components

Prints just like the original and has thin walls around the perimeter so that it fits together seamlessly

Pobrania
529
Polubienia
140
Ocena
5
P
Printablesmaker-dad

Filament Boxes as Storage Mounting Solution (split model for smaller beds)

Add storage while reusing empty filament boxes with a scalable, wall-mounted solution. For peace of mind, I mounted the top holders with screws and then used command strips every other which has held up well so far. Each bracket includes…

Pobrania
523
Polubienia
387
Ocena
5
P
PrintablesGlitch

Bestway Pool Skimmer (Smaller Design)

The Pool Skimmers I found on thingiverse were much bigger than I needed and also the Bracket did not secure them nicely to my Pool, it kept working it's way loose and then lifting the bucket out of the Pool. I decided to try design my own…

Pobrania
515
Polubienia
58
Ocena
5
P
PrintablesBN3D

Smaller Honeycomb Interlocking Water Bottle Rack

This design is a variation on my original Honeycomb Interlocking Water Bottle Rack suggested by @herbert . This version is designed to better accommodate smaller water bottles (standard Nalgene, CamelBak, etc.). All tolerances have been…

Pobrania
507
Polubienia
78
Ocena
4,77
P
PrintablesFish Adventurer

Mini Tool Box but Smaller

Scaled down version of my 3d printed mini tool box. At only 187.5mm wide, it will fit comfortably on the Ender 3 and similarly sized printers. For those printing with the BambuLab AMS or similar units, print profiles with the color…

Pobrania
506
Polubienia
77
Ocena
4,5

honeycomb holder smaller pliers

This is a honeycomb holder smaller pliers. It is designed for this Knipex tool, but other plier could work too. https://www.amazon.de/gp/product/B005EXOF6S/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Print Option: PLA 20% Infill If…

Pobrania
506
Polubienia
68
Ocena
5
P
PrintablesMichaël Fortin

Prusa Mini Z-axis brace (for smaller screws)

Same thing as the original by Brolin Workshop , but with smaller screw holes. Fits M3 screws and washers. Works great with these t-nuts which accept M3 nuts. Included is the somewhat cleaned-up STL in Fusion 360 format if you need to…

Pobrania
496
Polubienia
82
Ocena
4,91
P
Printablesbassman216

US General Mini Toolbox Gridfinity For Smaller Printers

For top organizer, print 2 as they mirror. For drawer organizer, there are 2 pieces as there is an odd number of slots

Pobrania
475
Polubienia
63
Ocena
4,33
P
Printableslacop

CR2032 (and smaller) battery holder insert for Bierkiste

Print the empty Bierkiste and this insert. Two of them stack on top of each other and fit inside the Bierkiste. Holds up to 20 pieces of CR2032 or smaller (CR2025 etc) coin cell batteries. Not very print-optimized yet: the walls could be…

Pobrania
462
Polubienia
68
Ocena
5

Skyrim Mehrunes Razor (Smaller)

Printable Mehrunes Razor from The Elder Scrolls Skyrim. This version is slightly smaller at 13 inches/330mm long, this allows it to be printable on the Prusa Mini's smaller print bed.

Pobrania
462
Polubienia
81
Ocena
5
P
PrintablesTritschi

Portable Cable Organizer / Winder as Smaller Edition

I found the tool a bit too large for some cables. So I reduced the overall size from 100% to ca. 75%. Fits now 110mm build plate (e.g. Voron 0.1). Many smaller cables (e.g. Micro USB, USB-C, phone charger cables) have a better fit now and…

Pobrania
460
Polubienia
62
Ocena
4
P
Printablessboelkens

Catan Player pieces with lid for larger and smaller pieces

Redesign of Catan player pieces with a lid. Fits with 5e Catan pieces The lid can also be placed on the underside when actively using. But I also added a version with a filled bottom, at which you cannot store the lid, but you don't need…

Pobrania
454
Polubienia
42
Ocena
5
P
PrintablesLCruz3D

Smaller Toggle Switch Cover - Diameter 6

All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…

Pobrania
453
Polubienia
163
Ocena
4,6
P
PrintablesMatt McGinnis

Smaller version of Spiral Vase Mode Sierpinski Pyramid

The original file takes 36 hours to print. This only takes 6 hrs. .1 layer height .6mm nozzle You can modify the .3mf file if you have a .4 nozzle.

Pobrania
453
Polubienia
39
Ocena
4,67
P
PrintablesBrian

Ghostbusters Terror Dog with smaller horns

The Terror Dog from Ghostbusters, I remixed the original file in order to create one with smaller thicker horns.

Pobrania
450
Polubienia
77
Ocena
5
P
PrintablesMVN
Pobrania
447
Polubienia
22
Ocena
0
P
PrintablesCanadianPenguin

Incastro Bases - Smaller

A small edit to shrink the size of the Incastro Desk Organizer to better suit those with compact printers or those with smaller desks Smaller - One Small Attachment Smaller Even Smaller - One Large Attachment Smaller

Pobrania
431
Polubienia
31
Ocena
4,67
P
Printablesmikrom

Good Fast Cheap Fidget Toy: Smaller slots

I made slider slots 2mm shorter so it seem to work even better - triggered sliders now does not end in the middle of the slot, but at the left end. Instructions: Download this base Download large and small pivot from Kenneth's model…

Pobrania
426
Polubienia
38
Ocena
5
P
PrintablesFractalDreams

Knife Sharpening Guide for 60 x 180mm whetstones, sized for smaller printers

I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…

Pobrania
426
Polubienia
136
Ocena
5
P
PrintablesNottingham82

Sy's peglock for smaller holes than 1/4"

I bought 4 different types of pegboard for my garage. Some had ¼ holes and some had 15/64 inch holes. All spaced 1 inch apart. Sy's peglock would not fit in the smaller holes so I used his fusion file and reduced the pegs from 6mm to 5mm……

Pobrania
410
Polubienia
39
Ocena
5
P
Printablesdmeeze

Ray gun prop - print in parts for smaller printers

WerkRaum's model (originally based on https://www.thingiverse.com/thing:2091732) is awesome, but I wanted one I could print in different parts rather than sand-and-paint. This version was remodelled from scratch using that design as…

Pobrania
388
Polubienia
119
Ocena
5
P
PrintablesMEPrinter

Remixed Smaller and Tall Mini Hanging Storage Container

Remixed model of Mini Hanging Storage Container to Smaller and Taller variant. You can use smaller 25 mm high version and taller 75 mm high version. You can see a comparison of both of these variants with the original model in the photo.

Pobrania
385
Polubienia
38
Ocena
5
P
PrintablesCodingKiwi

Polestar 2 Charge Cover for smaller printers

My custom version of the Polestar 2 charge cover, optimised to fit smaller 22x22 cm print beds like the Elegoo Neptune 4. The supplied .stl file does not contain the Polestar logo due to copyright reasons.

Pobrania
380
Polubienia
30
Ocena
5
P
PrintablesBenD

Modular Guitar pedal board for smaller printers

A fully modular guitar effects pedal board. Found the awesome work of Kilian here: https://www.printables.com/model/320009-modular-pedal-board-unlimitedly-expandable My only problem with that design was it wouldn't work well on my ender…

Pobrania
378
Polubienia
51
Ocena
5
P
Printables3DParts4U

Headset Stand (Smaller Foot)

Here's a good looking 3D printable headset holder! 🎞 How i remixed this model: https://youtu.be/OCav4Wq6GeE 🔽 Original Digital Model: https://www.printables.com/model/199812-headset-stand 🔽 Remixed Digital Model:…

Pobrania
375
Polubienia
27
Ocena
4,67
P
PrintablesAlex

Tea Bag Dispenser - Stackable Interlocking - For Smaller Bags

In the original version of this model I was able to fit most of my tea bags, but the smaller variants would not fit as neatly as I would have wanted. This was reason enough for me to make a version of the original that would fit these…

Pobrania
374
Polubienia
155
Ocena
5
P
Printableshelja.dankill

Tokens of Inspiration (DnD 5e) - Vertical, Smaller, Double Sided

I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result…

Pobrania
374
Polubienia
81
Ocena
5
P
Printablesjlips

Amazon Minicaster (Prusacaster for smaller printers using the Amazon kit)

PLEASE READ CHANGELOG BEFORE PRINTING There are 2 “darkgreen” files depending on the measurements of your bridge mounting holes. The Amazon Minicaster I wanted to print the Prusacaster, but my printer was slightly too small to print the…

Pobrania
367
Polubienia
65
Ocena
5
P
Printableslromandine

Bambu Lab Purge/Flush/Poop bucket for X1 or X1 Carbon (Smaller Version)

Remix of Cleberlop's poop bucket where I made the left side not stick out so the printer and bucket can sit flush against something on the left.

Pobrania
364
Polubienia
15
Ocena
5
P
PrintablesYuugen

Sticky Snake (20% smaller)

This model is a smaller version of the "Sticky Snake" model. Like the full-sized version, this model also comes in two versions: one with magnet slots and a normal snake. Click here to download the Sticky Snake model in original size.…

Pobrania
363
Polubienia
12
Ocena
5
P
PrintablesDragonDesign

invincible faceshell/mask SPLIT for smaller printers

Hi! This is a remix to a model, splitting it into two seperate parts. It's easier to print on smaller machines now (; Please Like and comment if you enjoy (: If you want to split it into objects , go into the objects tab, and click split…

Pobrania
353
Polubienia
38
Ocena
0
P
PrintablesJace1969

Rogue One ShoreTrooper Helmet Split to fit Smaller 3D Printer

This helmet looks brilliant and very well done and all credit to Seankfields : ) I'm currently printing this helmet, but I had to slice up a few pieces to fit my 200mm x 200mm bed. I also broke it down a little further to eliminate most…

Pobrania
350
Polubienia
106
Ocena
0
P
PrintablesRedbeard X18

D&D Tracker book for smaller printers

I split the cover to allow it to fit onto a smaller size bed than the original. After printing both pieces, 5 locking tabs click into place to join the pieces of the cover together.

Pobrania
350
Polubienia
91
Ocena
5
P
PrintablesRyanR

Smaller clip REMIX of "sleek chip clip"

I liked the original clip, but found it to be bigger than my needs. You can not simply scale down the model and print naively, since this will also scale down the size of the spacing between the prints, resulting in a fused print. My STL…

Pobrania
346
Polubienia
25
Ocena
5
P
PrintablesJustin Spanier

AAA Battery Magazine for smaller printers

I like these battery magazines, but my printer can't print the full height version. Here I offer this body which is much shorter so that it fits within the printable area. The body is all that is here, the follower, spring base, and base…

Pobrania
337
Polubienia
55
Ocena
0
P
PrintablesRolleroo

Smaller Laptop Adjustable Laptop Stand Simple and Strong

Easy to print adjustable laptop stand. It's strong, lightweight and easy to assemble. Each file should be printed twice, suggested mirroring the support. Thanks to Presswerk65 and bartnijs for the original model! V3 Added a slimmed down…

Pobrania
332
Polubienia
57
Ocena
4,5
P
PrintablesIvancho

Wrist brace smaller palm bridge

The original bridge across the palm of the hand was too wide. I just remixed it to make a smaller bridge. This object is considered a TOY prototype and not recommended for any practical use. Print and use at your own risk, since this…

Pobrania
331
Polubienia
28
Ocena
5
P
Printableswikallen

FlashForge AD5x Side Trim with smaller slot and PTFE glides.

FlashForge AD5x PTFE lined side access covers. Replaces the FlashForge enclosure kit IFS opening trim. This is an additional option to my swingarm guide system. This reduces the gap in the side panel and lined with PTFE tube for friction…

Pobrania
329
Polubienia
80
Ocena
5
P
PrintablesMalcom Edward

mATX Minimal Case sutible for smaller printers

This case was designed to lock together well while requiring minimal filament and able to be printed on most printers. I printed this on my ender 3 (Stretched to the limit in someplaces) and is setup to acomodate a Dual slot gpu, though…

Pobrania
327
Polubienia
82
Ocena
5
P
PrintablesJeff Hudnut

Smaller Oral B brush cover

Oral B toothbrush head cover. Remixed to decrease the size and added drain / vent holes

Pobrania
324
Polubienia
55
Ocena
5
P
PrintablesWolfgang Weber

Offline Dinosaur Earrings smaller

This is a remix of Eriks Offline Dinosaur Earrings I remodeled it to make it much smaller/thinner to make the earrings lighter and more dainty. Now they are roughly the size of a small coin and only 1,4mm thin. I printed with a 0,25mm…

Pobrania
323
Polubienia
79
Ocena
4
P
PrintablesScoott

Philips Sonicare 4100 Travel Case (for newer smaller models)

This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…

Pobrania
314
Polubienia
40
Ocena
5
P
PrintablesNiH

Large cosplay calipers for smaller printers

Calipers designed for helping with sizing cosplay props like helmets and armour. Model has the arms split in half to be able to fit on print-beds of smaller sizes (up to 350mm arm-length on a Mini). Bolt & nut style mounting peg for…

Pobrania
308
Polubienia
32
Ocena
5
P
PrintablesK2_Kevin

Smaller Bucket Shelf

Smaller shelf. Modified the Hex plugs to fit better (original is tapered for some reason).

Pobrania
308
Polubienia
76
Ocena
5
P
PrintablesGlenn37216

QUEST 3 (smaller) stand

Modified Q3 stand to fit 235x235 or slightly smaller build plates.

Pobrania
303
Polubienia
23
Ocena
4,5
P
PrintablesDazza

Hollowed Out Smaller Hobbit House Model Bag End Lord of the Rings LOTR Shire

Print your own Hobbit house. Hollowed out per request so that lights can be placed inside. Please publish your makes. Original model:

Pobrania
301
Polubienia
43
Ocena
0
P
PrintablesAardvarkSpleen

HexiBox Series: Dayton TCP115-4 7th Order Box Cut Into Smaller Chunks

I wanted to print this, but didn't have a printer big enough, or a way to cut acrylic. I cut through the internal walls to try to give the glue more to grab. My prints came out pretty rough, did them quick and dirty with a .80 nozzle, and…

Pobrania
298
Polubienia
37
Ocena
0
P
PrintablesScottyDoesKnow

Clicky 2 Digit Counter (+Smaller Version)

Future Changes… The smaller version is a little stiff since the spring arms are shorter, I might try making them slightly thinner to compensate. You also need to loosen the screws slightly for it to work well since otherwise it's clamping…

Pobrania
297
Polubienia
68
Ocena
5
P
PrintablesSp_

Smaller & stronger Pikachu Low Poly remastered

This is a 50% version of the low-poly Pikachu remastered, by @AgustinFlowalistikAr The original model has a weakness at the base of the tail, that made it prone to break if used a little too much. Furthermore, the original model is kinda…

Pobrania
295
Polubienia
18
Ocena
5
P
PrintablesAna

[Cosmetics/Makeup Organizer] smaller very poor edit to fit my smaller 3d printer

this is very poorly edited, but I'm lazy. for other lazy people only. Thanks!

Pobrania
294
Polubienia
28
Ocena
4,5
P
Printablesloicloic

iPad Air Stand Take 2 (Smaller)

Another version of my iPad Air Stand [ https://www.prusaprinters.org/prints/104638-ipad-air-stand ] This one is smaller (~113x106mm) and can be printed on a small printer like a Voron V0. The brackets have also been redesigned to have way…

Pobrania
291
Polubienia
22
Ocena
5
P
Printablesbjoern85

8cm 3.3" Egg Speaker smaller Remix

This is a refined and smaller Version from my Remix from the EggSpeaker. Including all sort of Files :-) You should be able to print it with less than 800 gramms or 265 meter (Ø1.75) of plastic including support material. In my opinion…

Pobrania
288
Polubienia
37
Ocena
0
P
PrintablesDorffMeister

SPACE-SAVING CASCADING HANGER - 4-in-1, 5-in-1 Ellipse Remixes, Smaller Hook

I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…

Pobrania
287
Polubienia
56
Ocena
5
P
PrintablesIchBinRooster

5 Gallon Bucket Hydro Tower For Smaller Print Beds

This page will be dedicated to a cut-down version of my 5-gallon bucket hydro tower. I have uploaded all of the other tower files to this page, if something is a bit too big, let me know so I can work on it. This will allow users to print…

Pobrania
287
Polubienia
53
Ocena
0
P
PrintablesKind3D

Clock Hands for Smaller Sized Clocks

This is a remix of @Liebherk_269093 's clock hands. They are made to fit the clock movements I've encountered (the second hand in particular). Additionally, I've shortened them so they look good on smaller form clocks such as my modern…

Pobrania
284
Polubienia
16
Ocena
0
P
PrintablesPJ R

Smaller Battery Box

This remix of Michal Fanta's model has been made narrower to accommodate a smaller print bed. The Changes and Additions: Overall width of box changed from 236mm to 204mm AAA and AA battery inserts have been recreated to hold batteries…

Pobrania
280
Polubienia
76
Ocena
4,75
P
PrintablesASJoker

Smaller Corners for Ikea Lack Enclousure

I edited the corners for the Ikea Lack enclosure from pjp_innovation https://www.printables.com/de/model/388132-ikea-lack-enclosure I make the corners shorter on one end so that they fit on my square bed. the corners are 200x200 now. The…

Pobrania
279
Polubienia
52
Ocena
5
P
Printablesklemikaze

SMALLER Nespresso coffee capsule cup holder

Nespresso coffee capsule cup holder made smaller to fit Ender 3V2 build volume.

Pobrania
273
Polubienia
29
Ocena
4,8
P
Printablesgiraffe

Smaller clamp with attachment

Made a simpler smaller clamp and attached a mounting point to it for ease of use / no hardware. Able to be used with original clamp screw. Printed on: Ender 3 Infil: 30% Supports: Only for the screw hole Quality: 0.2

Pobrania
266
Polubienia
32
Ocena
0