68 modeli
This project contains A case and coverplate for the Sofle Choc Split-Keyboard (the one from https://pandakb.com/products/pcb-kit/sofle-choc-pcb-kit/ ). A static-height tenting stand with color-customizable ‘stopper-inserts’ . The tenting…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project contains An alternative, adjustable tenting stand for a Sofle Choc Case I made: https://www.printables.com/model/1286514-sofle-choc-case-and-tenting-stand For both stands, left and right, you need: 8x M3x4x5 brass heat…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing Instructions For the left half you need to print some models mirrored (see note below files). There are two different models for the knob. The standard model is for encoders with a 12.5mm shaft and the tall version is for…
A tray mount case for the Sofle v2 split keyboard. Note that this is designed for the actual version 2 of the keyboard, not the RGB version, which is sometimes referred to as v2.1 (and sometimes falsely as v2!) Check Josef's page for more…
3D printed case for use with standard MX style switches. Uses standard screws and stand-offs, just replace the bottom acrylic plate with this. The photo's show a multi material print with clear ABS for RGB diffusion. I've remixed this…
This is a closed, full case for the Sofle RGB split keyboard. https://josefadamcik.github.io/SofleKeyboard/build_guide_rgb.html https://github.com/josefadamcik/SofleKeyboard/tree/master/Sofle_RGB Features: transparent bottom for the drop…
I built this so that my Sofle would be a little less naked than you get with the usual acrylic plates. This model is only for the Choc 2.1 variant with nice nano controllers and nice view displays. In addition to the keyboard itself…
This is a case designed for the Sofle RGB split keyboard. The case consists of 1 upper body part and one flat bottom plate, the plate should be cut with clear acrylic or similar to let the LED shine through. You'll need the following…
Flip to get the left-side version. This is a low profile case for the Sofle Choc. It keeps the components and solder joints under the board from getting snagged on anything, while adding minimal bulk to the board. It’s great for using the…
This is my attempt to make a round case with tenting for the Sofle v2 PCB. I printed mine in PETG and sanded it. Use M3 bolts and nuts, ranging from 8 to 20 (mm) for the legs, and 10 for the plate (I added padding between the plate and…
A case for the Sofle v2 keyboard that features magnetically attached lids and tenting feet. This replaces the lower PCB/bottom of the normal Sofle sandwich. I tried to keep the profile as low as possible. The lids account for relatively…
Covers for oled displays on sofle v2 split keyboard. If you want same effect with as on photo use 0 top and bottom layers.
Credits to danijoo for the original design! Life saver <3 I remixed this for the pandaKB which has the slider switch in a different location, as well as the female battery port. PCB kit: Aliexpress Battery: Aliexpress If you need any…
Printable plate that allows switches to click into place.
PRINT INSTRUCTIONS: You Will be printing the Tray and the Tenting Piece. I used Prusa Mini+ for all my parts For my Tray, I believe I used a 15% Gyroid infill, and Galaxy Black Prusament PLA, but it should be an easy print with any other…
Converted the kicad_pcb files from here https://github.com/josefadamcik/SofleKeyboard/tree/master/Case into stl's for easier printing. This was done using the Kicad StepUp addon for FreeCAD…
The rubber ring on the Leica Visoflex (Typ 020) will eventually become greasy and fall apart. This replaced it. Sand it with 400 grit to make it smooth.
I really liked the original model, but after starting to print it I noticed it had a number of flaws or incompatibilities with my kit ( https://a.aliexpress.com/_EHHvSdO ), so I fixed it. This version works for sofle keyboards that use…
This is my Fusion360 file for the SplitKB Sofle v2 (Kailh Low Profile Choc Switches/hot-swapable), its pretty bare bones and just the top and bottom plate. This makes it easy to edit and adjust! I've attached some pictures on how it…
remix of https://www.printables.com/model/268638-sofle-v2-case with bigger hole for reset button
3mm sandwich case for the Sofle Pico keyboard. These are the same dimensions used in the acrylic cases, because acrylic is recommended for the OLED cover. UPDATE: Added an optional “monoblock” case cover to hide the sandwich plates. The…
Really happy with the model, thanks to kb-elmo's work. I put a good few hours into the model on Blender but it needs some cleaning up. Total print time is about 14hours on my prusa mini. You can cut this down a bit by using no top/bottom…
Preliminary enclosed case. It is designed for a fully assembled (with bottom plate) Sofle v2 (not rgb) to sit inside it. The bottom plate attaches to the top using m3 countersunk screws and threaded heat inserts. I used 6 x 3 magnets to…
This is a case for the low profile Choc Sofle. The top fastens to the bottom via 6mm x 3mm magnets. There is optional tenting via M3 heatset threaded inserts. Inserts:…
After buidling a Keyhive Sofle RGB Kit I realized that I didn't like how the plates were connected. With the default plates the PCB floats in the middle and is really only held in position by the keyswitches. To remidy this I designed a…
This is a custom case for a wireless Sofle RGB split keyboard build. The bottom of the cases have slots for four 20x5mm magnets, which are used to hold the tenting legs and can also be used to attach the keyboards to each other as to make…
Bottom case is made in a 3 part object for easy material selection for shine through. for assemble you will need: 24 x M2 x 4-5 mm screws (flathead or at least countersunk) 12 x M2 x 8mm melt-in-threads or similar threaded sleeves you can…
Encoder Knob : Kwark - Small Potentiometer Personal project to design the “perfect” case for my Sofle V2 keyboard. The case is a heavily modified version of kb-Elmo's design, with the following edits: Added support for gasket mounting.…
A low-profile case for the Aurora Sofle V2 keyboard kit by splitkb. Designed for the Choc hotswap kit, based on plate files provided by splitkb (https://github.com/splitkb/aurora). Includes a window for the OLED screen, but excludes the…
I wanted to experiment with tenting angles without going crazy on disassembling and making a case. This just snaps on to the thumb side between the PCB layers of the keyhive kit. The result gives a fairly sturdy 15 degree tilt. Category:…
Why I needed a case for my keeb, and available models didn't fit the PCB, screw holes and cutouts (trust me, I tried). So obviously I needed to design my own. This case fits the Sofle Choc v3 sold by 42keebs . What This model comes with…
Tenting case for Sofle v2 RGB to use M3 instead of M4 for the tenting legs
Built to fit my IFKB Sofle RGB. I used the template from the github sofle case svg (https://github.com/josefadamcik/SofleKeyboard/blob/master/Sofle_RGB/Case/Sofle_RGB.svg) so it should fit most.
Update 10/2023: I have since made a complete case with a nicer tenting solution . If you don't just want a quick and dirty hack I'd recommend checking that out instead. I recently printed effae's Sofle V2 case but wanted a tenting…
If you are not using the tps module, mirroring the left side should work fine. Same if you are using the tps module on the left side. Printed with the top of the case facing down the plate, supports for the tps cut and some of the holes…
ASSEMBLY MATERIALS NEEDED 10x M2 x 8 mm screws (cases) 20x M2 x 4 mm screws (plates) [included in Sofle kits] 10x M2 x 8 mm standoffs (PCBs) [included in Sofle kits] 10x M2 x 4 x 3.5 mm heat-set threaded inserts (to fasten case halves)…
I wanted a case like effae's one , but with a nicer and more sturdy tenting solution than gluing on some legs. So I made my own! This case has a 21 degree angle. Note this is for the V2 non-RGB Sofle. The case and the tenting frame screw…
Note: Handing is not reversible!! Printing at 0.2 layer height should leave the hotswap sockets nearly resting on the base layer. To provide a nice desk interface I used a 1 mm adhesive eva foam sheet. with Tecsee mediums keycap height on…
Rounded edge case for the Sofle Pico. I designed this as an alternative to the boring default ‘sandwich plate’ cases. Lets you showcase a colorway with a matching keyplate. The XD keycaps pictured are a non-standard small size, so the…
Travel enclosure, bottom case and a tilt stand for the Sofle Choc Keyboard. Print one copy of the files mirrored. Tilt stand is configured to 15º, use the OnShape link below to customize. There is no special attachment of the Tilt-Stand…
Based on my initial top and bottom plate I added a new case that encapsulates the pcb and controller to give them better protection. See original top/bottom plates here:…
A bottom cover for the Leica Visoflex 2 that slides onto the shoe and protects it in your bag. Hopefully this stays on a little better than the original Leica bottom cover.
My Solfe RGB wireless case , come with battery support
Hardware Needed Sofle Choc 2500mah battery or smaller 6x M2x12 screws 10x M2x6 screws 4x M3x14 screws (for tenting kit) 4x M3 nuts (for tenting kit) 10mm circular silicon feet Thread lock (optional but the tenting nuts like to come loose)…
Note: the frames are intended to hold the laser cut base plate. Fit may vary.
This is a modified version of the original case, redesigned to accommodate a 3000mAh battery.
I printed with supports and highest possible quality for the material since the model is so small.
Case for the db-ok fork Sofle Choc wireless RGB with power switches. Has a slight angle for ergonomic reasons. I do not recommend the use of an OLED screen as there is no cover. I use them, but they've broken a couple times in transit.…
For travelling etc, especially to keep those encoders from snapping. Depending on what keys exactly you use for space/enter you might need to edit the model: https://a360.co/44bco5l
It tents by screwing 4 M4 screws into the holes, I used M4 * 30 in the photo. It has gaps for the feet mine came with that I didn't want to remove, but it should work just fine without them. It may take a push to get the boards into the…
a sofle keyboard case made to close magnetically
This is a gasket mount Sofle RGB case. So You'll want to put some poron foam strips along the tops of the vertical walls of the lower case and then add some along the edges of the top of the switch plate. Then when you assemble it, you'll…
A Baseplate to stand on and a Switchplate to hold the Switches in position. Baseplate also in a "float" version with a reduced outer edge by 4.5 mm.
Recently, I built the famous Sofle Keyboard (RGB PCB version in my case). I was trying to find even a simple case. I couldn't find anything that would satisfy my needs, since looks like many people design cases without using heat-set…
This model uses this keyboard kit: https://s.click.aliexpress.com/e/_okGaGs3 And to connect the battery, you will need these clips: https://s.click.aliexpress.com/e/_oDhUe7p it uses standar M3x8mm screws if you don't have alredy I suggest…
Howdy! I am new to 3d printing and designing, but here is my attempt to create lids for this case. Please forgive any hiccups; I started learning all this a week ago. NOTE: I am explicitly using the Sofle v2.1 RGB. If you are building…
This is a remix of the Sofle V2 RGB Beveled case created by thysdewet on thingiverse: https://www.thingiverse.com/thing:4753682/files It is intended to use M3 Socket Cap screws (3 per side) to attach the mount to the modded Sofle Case. It…
Just a decorative cover
Switch plate with improved stability Plus a riser for use with some M2x6mm risers, so the pcb doesn't separate from the switch plate
Thanks to @Hans for the original model I based mine on. This PCB can be assembled in several ways. My version is shown in several photos. I added an extra pin to the display connector to experiment with a Nice!View display. See the…
WARNING: Make sure the fit is not too tight, there is a danger of damaging the 5-way-switch if you force it too much! A quick design for a low profile 5-way-switch-knob with a height of 5mm. For the square hole on the bottom I made a…
You could print it without supports, though the cutouts for the type c ports may get a little ugly. The case is essentially intended for this board, only with type c ports, rather than trs connectors.…
This case is for wireless build using nice!nano, mikoto, supermini or nrfmicro. I only publish the left side, for right side you can mirror it in slicer. Power switch: BOM: m2x6mm standoff 10pcs m2x3mm countersunk screw 10 pcs m2x8mm…
I wanted to add a battery to my new Sofle keyboard, so I designed a mounting solution for a 18650 battery holder. The mounting holes line up with holes in the PCB and the top plate, allowing you to easily add it to an existing keyboard.…
Ultra-Slim Sofle Choc Case (PandaKB Kit), Screwless, TPU-Friendly Features Extra flat, low-profile design for Choc switches Minimalist layout, with no OLED cutouts (for builds without displays) Screwless assembly: the PCB sits securely in…
Thanks to @Hans for the original model I based mine on. This PCB can be assembled in several ways. My version is shown in several photos. I added an extra pin to the display connector to experiment with a Nice!View display. See the…
A case for the Sofle v2 keyboard that features magnetically attached lids and tenting feet. This replaces the lower PCB/bottom of the normal Sofle sandwich. I tried to keep the profile as low as possible. The lids account for relatively…
