Wyniki wyszukiwania: suppressor

Sortowanie

273 modeli

P
PrintablesAinon3Dtisk

MK23 SOCOM Airsoft Suppressor 150mm M14x1L

Hi there, Here is an airsoft suppressor (150 x 40 mm) with an M14x1 LH (left-hand) thread. It fits any airsoft gun. It features the standard M14x1 left-hand thread found on all types of airsoft barrels. It fits perfectly and holds…

Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesRecticle

Airsoft Suppressor SOCOM 2 Series 14x1 CCW

Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…

Pobrania
3895
Polubienia
427
Ocena
4,86
P
PrintablesjonnieZG

Stackable Airsoft Suppressor Baffle

This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…

Pobrania
3075
Polubienia
350
Ocena
4,75
P
PrintablesjonnieZG

Custom Airsoft Suppressor Baffle Sponge

The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…

Pobrania
2003
Polubienia
252
Ocena
0
P
PrintablesAVieira

"Osprey" Airsoft Suppressor

This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…

Pobrania
1843
Polubienia
347
Ocena
5
P
Printablestrupik666

Suppressor/silencer for my gb-22

This socom silencer should be compatible with my gb-22.

Pobrania
1567
Polubienia
79
Ocena
0
P
PrintablesGodlikeOne

Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer

I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…

Pobrania
1092
Polubienia
98
Ocena
3,67
P
PrintablesMeca Dynamics

AAP-01 Suppressor 70mm

Do you like tiny suppressor like me? I present to you my little custom suppressor for the AAP-01! You can put this bad-boy on your airsoft replica with the 14mm CCW thread to have a really cool looking gun! !!!!!!! AIRSOFT ONLY !!!!!!!…

Pobrania
941
Polubienia
89
Ocena
4,88
P

AEA HP MAX stackable silencer/suppressor

Your printer needs to be able to print fine threads. I used some silicone grease to make them easier to fit/screw on. NO SUPPORT NEEDED :) The threads are m30.5x1 You can "infinitely" stack this suppressor

Pobrania
893
Polubienia
55
Ocena
4,33
P
PrintablesQuentinL

Shortened version of V4 suppressor

I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…

Pobrania
879
Polubienia
99
Ocena
4,67
P
PrintablesStikkan
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
836
Polubienia
101
Ocena
5
P
PrintablesAVieira

Airsoft Hex Suppressor - OTB

There's two versions, "OTB" (Over The Barrel) has the thread around the middle of the silencer and the normal version has the thread at the base. Silencer dimensions: 157mm x 35mm OTB: The barrel hole is 15mm and the thread starts 70mm in…

Pobrania
802
Polubienia
149
Ocena
5
P
PrintablesMirko

Air Gun / Air Rifle Silencer Moderator Suppressor 1/2" UNF Thread

This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…

Pobrania
794
Polubienia
70
Ocena
0
P
PrintablesMars1307

Suppressor/Silencer for SSG24

Hi, thanks for downloading my file! I made this suppressor/silencer for my Novritsch SSG24, because the one Novritsch sold on his website was a bit too expensive for my taste. How it's made This silencer is made up of three easy-to-print…

Pobrania
788
Polubienia
82
Ocena
4
P
PrintablesKerry

Airgun Moderator/Suppressor/Silencer

I print this with some brim, because it's rather tall for how little area it has to adhere to the print bed. Needs no support. I printed it in PLA but I assume any filament will also work fine. Should fit any airgun with a ½"-20 UNF…

Pobrania
782
Polubienia
54
Ocena
5
P
PrintablesMarekZCMB

Suppressor

SP-01 Shadow 119x22mm, 1/2x28, cal. 6.0mm SP-01 Shadow 119x22mm, M12x1, cal. 4.5mm

Pobrania
755
Polubienia
56
Ocena
5
P
PrintablesKerry

Donny FL Air Gun Moderator/Suppressor Baffle

Insert this baffle into a Donny FL suppressor to make it quieter. I've experimented with several different types of baffles and this is the best one I've found. Mine is for a PCP .22, - but this baffle could certainly be modified or…

Pobrania
725
Polubienia
37
Ocena
0
P
PrintablesFischi

Suppressor Holder; Silencer Holder

Hey, this is my first Thing. I design this holder for a hunting friend of mine. Feel free to used it. High: 150 mm deep: plate 6 mm, holder: 76 mm width: 70 mm hole: 55 mm diameter I used supports only for the top of the hole. Print…

Pobrania
680
Polubienia
45
Ocena
5
P
PrintablesCitruspers

MP9 suppressor adapter (airsoft)

An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.

Pobrania
678
Polubienia
28
Ocena
0
P
PrintablesCitruspers

L96/MB01 suppressor adapter (airsoft)

Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…

Pobrania
611
Polubienia
40
Ocena
0
P
PrintablesXer0

Crosman DPMS SBR Suppressor Concept

This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…

Pobrania
596
Polubienia
58
Ocena
5
P
PrintablesDrEduza

PP750 internal suppressor replacement

This is meant as silencer/suppressor replacement for SPA PP750 cal. 5.5 mm internal suppressor. I accidentally lost the originals, so I did this one. I've also put cotton wool outside the K-baffles, works better than original imho. Each…

Pobrania
578
Polubienia
44
Ocena
0
P
PrintablesBioAlex

BioSuppressor for Airsoft

A 3D printable mock suppressor for airsoft guns. The thread is inset inside the suppressor by 50mm. The suppressor is suitable for RIFs with a threading of 14mm CCW. The front end of the suppressor unscrews to allow access to the inside…

Pobrania
575
Polubienia
71
Ocena
0
P
PrintablesFaceHaver

Air Rifle Suppressor - for felt/foam

Air rifle moderator, for use with sound dampening felt or foam . 193mm overall length, the tube is 185mm long, 40mm outer diameter, 36mm inner diameter, each cap extends 4mm out of the tube. Inspired by the many aftermarket designs that…

Pobrania
568
Polubienia
73
Ocena
0
P
PrintablesMichael Rios

DTKP HEXAGON SUPPRESSOR

40% infill PLA or PETG

Pobrania
488
Polubienia
24
Ocena
0
P
PrintablesEdan farr

Honeycomb 14MM CCW thread Airsoft suppressor

Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…

Pobrania
470
Polubienia
49
Ocena
5
P
PrintablesMirko

Diana Stormrider / Bandit Air Gun Silencer Moderator Suppressor M10x1 Thread

This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…

Pobrania
446
Polubienia
27
Ocena
0
P
PrintablesMarmaduck

Airsoft Octagon Slim Suppressor Foam Ready (MTW)

I recently bought a Wolverine MTW and wanted to have an integrated/nested suppressor in the handguard, but the more I looked the more I had difficulty finding one that would fit AND that I liked. The internal diameter of the MTW's…

Pobrania
436
Polubienia
59
Ocena
5
P
PrintablesMichael Rios

AIRSOFT M4 SUPPRESSOR

40% Infill PLA or PETG

Pobrania
421
Polubienia
38
Ocena
0
P
Printablestachanka71

Mock Suppressor for Airsoft-14mm CCW Threads

print with brim for better adhesion

Pobrania
418
Polubienia
26
Ocena
5
P
PrintablesUnknown1622

127 mm ( 5" ) Airsoft Mock Suppressor / Silencer ( 1/2 inch CW thread )

print thread side up 100% infill 0.2 mm layer height

Pobrania
417
Polubienia
29
Ocena
0
P
PrintablesHINNERK

Monster Energy Airsoft suppressor

print it, drink your Energy, make a hole in the top, size as large as the opening for adapter (14mm) glue it together. ready to shot.

Pobrania
398
Polubienia
96
Ocena
5
P
Printablesm00nd0gg

Airsoft King Arms PDW 9mm Mock Suppressor

Airsoft only. Not for firearms. Barrel extension / mock suppressor for King Arms PDW 9mm SBR M-Lok airsoft rifle for extending the barrel for a 363 mm ( https://www.amazon.com/gp/product/B078SC421D/ ). First version broke at the thread…

Pobrania
384
Polubienia
54
Ocena
0
P
Printablesrickypc

22 Suppressor. Sectional baffles.

Credit to https://www.printables.com/@nleinad and https://www.printables.com/@QuentinL_4378541 for the originals. Here I have added some sectional threaded baffles. The idea was to have a separate printable section so you could add as…

Pobrania
378
Polubienia
51
Ocena
0
P
Printables3DMason

Fat Airsoft Suppressor for Umarex T4e HDR/HDP/TR-50 -.50 CAL-

Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…

Pobrania
374
Polubienia
33
Ocena
0
P
Printablesjoseph james

Airsoft Monster suppressor/silencer (Functional)

This is only guaranteed to work with 16oz white monster energy cans due to some flavors being different sizes. You're welcome to try others but don't say I didn't warn you. Make one cut around the can (I've found that the best/easiest…

Pobrania
367
Polubienia
48
Ocena
5
P
PrintablesAHMan

REMIXED Suppressor Trojan NTX Libra

The original file for this suppressor had issues where the inner diameter was too small for a 6mm BB to pass through. This file has a larger inner diameter as well as a larger overall body with support for 14mm CCW threads. This…

Pobrania
348
Polubienia
29
Ocena
5
P
PrintablesMichael

Glock Sight Pusher Installation Tool for Suppressor Height Irons (fits Glock)

After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…

Pobrania
343
Polubienia
75
Ocena
3,5
P
PrintablesWesley Rogers

Airsoft Tracer Housing/Mock Suppressor

The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…

Pobrania
337
Polubienia
44
Ocena
5
P
PrintablesZodiase

Long Mock Suppressor (requires tracer unit with threads)

Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…

Pobrania
330
Polubienia
31
Ocena
5
P
PrintablesNixqy

Glock Sight Pusher - Suppressor Height Sights

I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…

Pobrania
309
Polubienia
58
Ocena
4,5
P
PrintablesRaelyn Rose

CYMA AK suppressor.

This is a very simple MOCK airsoft suppressor i designed for very specific reasons. i have a cyma standard ak 105 carbine. CYMA Standard Stamped Metal AK-105 Airsoft AEG Rifle with Synthetic Folding Stock (Package: Gun Only), Airsoft…

Pobrania
307
Polubienia
26
Ocena
0
P
Printableswtxmetriod

Airsoft suppressor insert, Avengers QD Mock Suppressor

Designed to fit in the Avengers QD Mock suppressor that is modeled after a Knights Armament suppressor. I had some problems with the “.20 SPEED” preset, but “.20 STRUCTURAL” worked fine. Mock Suppressor:…

Pobrania
306
Polubienia
26
Ocena
0
P
Printablesmaverickagm

Crosman 1322 suppressor

A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…

Pobrania
299
Polubienia
21
Ocena
4,5
P
Printablescoffee hunter

Suppressor Holder / Schalldämpferhalter

Bei 15cm Druckhöhe hat der Halter einen Innendurchmesser von 6cm. Die Aussparungen für die Magnete sind in der aktuellen Version für 20mm Durchmesser und ca. 5mm dicke Magnete gemacht. In der Mitte hatten meine Magnete ein Loch, das ich…

Pobrania
293
Polubienia
17
Ocena
5
P
PrintablesFaceHaver

HW40/P17 Suppressor Adapter

Silencer adaptor for use with Weihrauch HW40/Beeman P17. Fits 1/2-20 UNF threaded moderators. Held in by friction. The options to use a suppressor with the HW40 were limited. This works pretty well. Only issue is that when attached, a…

Pobrania
280
Polubienia
13
Ocena
0
P
PrintablesKN16

DL-44 Flash Suppressor Threaded for 1/2" x 28

A replica of the muzzle device on Han Solo's DL-44 Blaster. It is set up to work with 1/2" x 28 threads. it will thread onto AWCY's Proto Barrel ends (available elsewhere). Either the "One Part Option - Permanent" or the “Two Part Option…

Pobrania
280
Polubienia
28
Ocena
0
P
Printablesandz 0001

Saker ASR muzzle brake and suppressor combo (AK thread)

The suppressor goes over the muzzle brake . Thread on bottom of the muzzle brake is 14x1L , compatible with most AK style replicas , muzzle break - suppressor body joint is a M22 standard thread with 1.75mm clearance , suppressor-end cap…

Pobrania
257
Polubienia
21
Ocena
0
P
PrintablesdeSuperNoodle

Replica Suppressor for Working Glock-18 Replica from CSGO/CS2

Replica Glock-18 found here → Click Me The suppressor isn't modeled after any specific IRL suppressors. It's meant to be simple. Installation: Slide the suppressor into the barrel. The side with the rifling will go into the barrel and use…

Pobrania
237
Polubienia
48
Ocena
0
P
PrintablesDarkstar Arms

Suppressor/Silencer Mount

NOTE: The revised version fixes a few minor errors and adds additional vertical support. These were designed to allow you to mount multiple suppressors of varying calibers to different surfaces including walls, safe doors, etc… These…

Pobrania
235
Polubienia
24
Ocena
0
P
PrintablesBažusLab

shot suppressor with M12x1 internal thread

Tlumič výstřelu s vnitřním závitem M12x1

Pobrania
215
Polubienia
11
Ocena
0
P
PrintablesMarmaduck

32mm Airsoft Suppressor that fits Acetech Brighter C

I designed this suppressor in a way that you dont need an special threads to affix it to your airsoft gun. You put the small cap over your barrel's threads, add the Brighter C and tighten, and then add the suppressor over top. There is…

Pobrania
207
Polubienia
10
Ocena
0
P
PrintablesKP design

Airsoft silencer/suppressor. (work in progress)

all kinds of different combos, outer shells, internals, end caps with and without holes for gas/sound to escape all of them fit together except for the long version, the longer version will still work with the endcaps but also need a…

Pobrania
206
Polubienia
39
Ocena
0
P
PrintablesJay 12913

Short & Stubby Hex suppressor

Short, stubby and hexy suppressor. Bit of a play around in Fusion, someone might want it :) 14mm ccw thread. Print without supports at whatever settings you fancy, rafts not required.

Pobrania
201
Polubienia
23
Ocena
5
P
PrintablesLord Radford

Suppressor Barrel Extension Airsoft X9 Nemesis ARP

This is an airsoft barrel extension styled for the Classic Army X9 Nemesis ARP. I haven't formed the threads for screwing onto the outer barrel; instead it is sized for the treads to cut in themselves. This will give up to 100mm extra…

Pobrania
200
Polubienia
31
Ocena
5
P
PrintablesDario Ordovas

Airsoft MK18 Suppressor / Silenciador Silencer (14mm CCW)

[EN] Airsoft MK18 Mock Suppressor / Silencer (14mm CCW) Custom tactical mock suppressor designed to fit the MK18 airsoft replica. Features a standard 14mm Counter-Clockwise (CCW) thread, making it fully compatible with most M4/AR15…

Pobrania
197
Polubienia
22
Ocena
0
P
Printablesdajuji04

airsoft functional suppressor 26mm thread

Functional suppressor that reduces noisy shooting noise, for the double eagle M904G that fits inside the handguard. It is compatible with other rifle models with 26mm thread.

Pobrania
191
Polubienia
29
Ocena
0
P
PrintablesLab3D

MOCK SUPPRESSOR FLUTTED - 150x38 - AIRSOFT

MOCK SUPPRESSOR FLUTTED 14mm CCW THREAD (most common) 150mm lg 38mm diam. 9mm id for optimal extended barrel support

Pobrania
190
Polubienia
21
Ocena
0
P
PrintablesNickFAdame

.177 Cal Airgun Monocore Suppressor, 27mm Diameter (Monocore Only)

This is a 27mm diameter Monocore for a Monocore Suppressor for your .177 caliber airguns. THIS FILE ONLY INCLUDES THE MONOCORE. Since there are so many different-diameter barrel airguns, there is no way I could design an individual…

Pobrania
181
Polubienia
15
Ocena
0
P
PrintablesH3phaestus42

Pistol Suppressor Prop

Sticks to a prop gun with the correct fitting

Pobrania
164
Polubienia
22
Ocena
0
P
Printablesthe_mad_printer

hollow airsoft suppressor

you can stuff it with a sponge like I did to make it work, for 13mm barrel

Pobrania
164
Polubienia
23
Ocena
0
P
Printablesiellart

Suppressor for glock

A suppressor made for glock model.

Pobrania
160
Polubienia
10
Ocena
0
P
PrintablesCaps3D

Honeycomb Suppressor (Fusion 360 file)

Suppressor with a honeycomb pattern. The STL file includes an M14x1mm thread, 13 mm in length. The thread pitch can be modified using the provided Fusion 360 file.

Pobrania
158
Polubienia
11
Ocena
0
P
PrintablesJA3D

14mm ccw thread for well r1 uzi airsoft suppressor

14mm ccw treads and a suppressor with removable front cap for well r1 uzi Category: Toy & Game Accessories

Pobrania
158
Polubienia
13
Ocena
0
P
PrintablesPhenn

Couvre Silencieux Suppressor Cover

Couvre Silencieux Suppressor Cover Diamètre Intérieur +0.15 Diamètre Extérieur sur toutes les versions = 57.1mm

Pobrania
157
Polubienia
29
Ocena
5
P
Printablesshadowf@x

Creality Sermoon-D1 Z-Axis Wobble Suppressor

Print the parts with thick walls and top/bottom layers (2.4 mm.) Use 40% infill. It needs to be strong. In addition you will need: 2x 688ZZ (or 688-2RS) ball bearings (8x16x5 mm) 4x M4x10 Allen Head screws with washers 4x M4 T-nuts 4x…

Pobrania
155
Polubienia
19
Ocena
5
P
PrintablesMichael Rios

AIRSOFT PMS AK-12 SUPPRESSOR

40% infill or More PLA + or PETG

Pobrania
151
Polubienia
11
Ocena
0
P
PrintablesTarz

Holsters for Glock 19 G3 and G4 with or without TLR-6 and Suppressor Height Sights

NOTE: 09/21/2025 G3 and G4 holsters for suppressor height front sights up to 10mm added. This is a pair of open bottoms TPU holsters for the Gen 3 and Gen 4 Glock 19. It will fit pistols both with and without a TLR6 tactical light. It…

Pobrania
146
Polubienia
11
Ocena
0
P

SSP18 mock suppressor

SSP18 mock suppressor Shoutout to “H6K2LH” for the idea. I need to mention that this is not a repost, I did make these on my own, so please, don't call me a copier. I made this model because I wanted a super cool looking mock suppressor…

Pobrania
144
Polubienia
15
Ocena
0

Q "Plan-B" suppressor mount for SKS

This is a custom designed suppressor mount that I saw in the gunsmithing subreddit. Designed by u/VernoniaMW. To create this model, I used a sketch and a set of coordinates that u/VernoniaMW included in his post. I've never modeled…

Pobrania
141
Polubienia
5
Ocena
0
P
PrintablesMadScientist

Nerf Radial Scar Suppressor

Here is something that came from my years of trying to make the quietest springer blasters. It is a 16mm (Caliburn) direct mount suppressor with integrated rifling for short darts. It works best with a TPU piston and TPU extended spring…

Pobrania
141
Polubienia
29
Ocena
4
P
Printables3dprintathome

Dead Air Suppressor holder (remix)

I printed the 52mm file from the original creator and found it was not what I needed. I resized the model to fit several Dead Air Suppressors. I then merged each holder to combine them into two sets of 3. These holders fit the following:…

Pobrania
141
Polubienia
11
Ocena
4
P
PrintablesBJ

8" Detachable 1911 Suppressor

I love the original gun made by DeSteiner ( https://www.printables.com/model/1446099-desteiner-colt-m1911-mechanically-working-prop-gun ) but I always thought it need a sick ass suppressor. My design was inspired by games like Battlefield…

Pobrania
140
Polubienia
22
Ocena
0
P
PrintablesTrailblazer

SMG Venom Pro DartZone Upgrades (mock suppressor + micro stock)

This mock suppressor is compatible with the SMG body kit by XFoxGames. You can purchase that kit separately here . The micro stock should be compatible with hollow buffer tubes. The one I have pictured is a folding stock from Evike, but…

Pobrania
137
Polubienia
26
Ocena
0
P
Printablesgkatev

Short "Osprey" Airsoft Suppressor

This is a shorter version of the original. I've found that on my AEP, the suppressing performance is essentially the same, and the sorter suppressor is more maneuverable. The plug on the front is also shorter, to maximize the available…

Pobrania
136
Polubienia
14
Ocena
0
P
PrintablesLotus

14CCW Airsoft Suppressor, FOAM!

The suppressor is 7" long and 1.3" (34MM) in diameter. I printed with %25 infill (Grid). No supports needed! Enjoy and leave a comment if you print it!!!! *Sorry i don't have the best pics for this model * This is free for you to print,…

Pobrania
136
Polubienia
10
Ocena
0

Suppressor for Jag arms airsoft shotguns

Just a dinky little side project that I thought would be neat. I designed this for my own personal scattergun, which is the TS version. This thing should fit fine on most of the scattergun variants, though I'm not entirely sure if it will…

Pobrania
135
Polubienia
16
Ocena
0
P
PrintablesSamosos

Rectangular suppressor compatible with the handguard

This is a model of a suppressor that should fit with the handguard, if you have any suggestions please comment

Pobrania
135
Polubienia
20
Ocena
0
P
PrintablesMücke

KWA - M11A1 Customizable Airsoft Mock Suppressor - Free Download

A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…

Pobrania
130
Polubienia
14
Ocena
0
P
PrintablesBriggen

Suppressor

Suppressor

Pobrania
125
Polubienia
23
Ocena
0
P
PrintablesUntangleWORKS

FGC-6 S AF H MKI / MKII basic outer barrel and suppressor set

02-06-2025 UNW-T6 outer barrel options added --- as part of the big V24 update. the 14mmccw barrels have been made a bit stronger and partisan 6 barrels have been added - 14mm CWW barrel tips have been added --- these are the 2023…

Pobrania
125
Polubienia
6
Ocena
0
P
PrintablesMaitreLancelot

Valorant Suppressor

Valorant suppressor adapted to airsoft, consider print the test fit before printing the entire model . anti clockwise thread ''VALORANT SUPPRESSOR'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot…

Pobrania
122
Polubienia
15
Ocena
0
P
PrintablesMemory Maker

AirSoft suppressor

32 mm outer diameter carbon tube needed Use a threading tool to add the right thread for your airsoft gun also included the sldprt files for solidworks.

Pobrania
121
Polubienia
13
Ocena
5
P
PrintablesUntangleWORKS

FGC-6 MKI / MKII S AF H LB and LB SHORT outer barrel and suppressor set

02-06-2025 UNW-T6 outer barrel options added --- as part of the big V24 update. the 14mmccw barrels have been made a bit stronger - 14mm CWW barrel tips have been added --- this is a 300mm long barrel replica made for the LB (the…

Pobrania
120
Polubienia
4
Ocena
0
P
Printableszaufen

tracer unit suppressor barrel (acetech brighter C)

battery suppressor outer barrel with room for acetech brighter c tracer unit

Pobrania
111
Polubienia
12
Ocena
0
P
Printableslavendork

Suppressor/Flash Hider for HC Diana Blaster

This model uses four M2x5mm countersunk machine screws, commonly known as flywheel cage/motor screws in the hobby. I designed this because I wanted a muzzle piece for my Diana that had a fairly visible footprint, without adding much bulk…

Pobrania
109
Polubienia
12
Ocena
0
P
PrintablesWill

Airsoft VFC SR16 Mock Suppressor

The rear slides over the hop up adjuster and is open at the bottom so it doesn't interfere with MLOK forward grips. The rear part is held in by the front piece once its screwed onto the barrel thread. You will have to remove the barrel…

Pobrania
107
Polubienia
26
Ocena
0
P
PrintablesLab3D

MOCK SUPPRESSOR CHAMBERED 14mm ccw 150mm x 38mm

MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.

Pobrania
106
Polubienia
5
Ocena
0
P
PrintablesJSchell1309

Rugged Suppressor Collar Wrench for Surge, Razor, Micro, Radiant, RUM collars

This is a low profile clamp wrench for Rugged Suppressors center fire rifle locking collars. This will work with Surge, Razor 556 and 762, Micro, and Radiant models and their new RUM HUB adapter. This is a remix starting with a trace of…

Pobrania
106
Polubienia
6
Ocena
0
P
PrintablesMichael Rios

AIRSOFT MODULAR SUPPRESSOR

60% infill PLA or PETG

Pobrania
103
Polubienia
6
Ocena
0
P
PrintablesCaven Brown

SSX23/Mk23 Airsoft Foam-filled Suppressor

16 CW suppressor with foam insert compatible. Works with SSX23 or Mk23! A Few Things to Note: - Used Electrical Tape to hold pieces while glue set. - Compatinble with the Novritsch Ghillie Suppressor Cover - Uses 4" foam paint rollers as…

Pobrania
100
Polubienia
6
Ocena
0
P

over barrel SSG96 suppressor (for US orange tip)

an over barrel suppressor that screws onto your long barrel US version (not sure if it fits short barrels versions) of the Novritsch SSG96 orange tip.

Pobrania
100
Polubienia
8
Ocena
0
P
Printablesjogardim

Suppressor M25 Thunder Black

Alternative airgun suppressor Snowpeak/Artemis M25 Thunder Black .35 caliber . 5x baffles for 1x suppressor body.

Pobrania
97
Polubienia
10
Ocena
0
P
Printableschimir

Faux Suppressor for Gryphon Nerf Blaster - Removable

Faux Suppressor for Gryphon Nerf Blaster - Removable

Pobrania
97
Polubienia
14
Ocena
5
P
PrintablesLevikeOne

Suppressor 50mm

The idea was the Arcturus karambit series which have this kind of suppressor. I'm not sure how the original is designed regarding it's length, holes etc. but i wanted the look to be simmilar so that's why it has a 25 mm “countersink” (as…

Pobrania
93
Polubienia
13
Ocena
0
P
PrintablesLab3D

MOCK SUPPRESSOR TRINITY - 150x38 - AIRSOFT

MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. 9mm id for optimal extended barrel support

Pobrania
93
Polubienia
19
Ocena
0
P
PrintablesLevikeOne

Arcturus Suppressor 63 mm

Arcturus AR06 suppressor

Pobrania
92
Polubienia
16
Ocena
5
P
PrintablesFischi

Suppressor Holder strong

V2 of my Supressor holder in Strong version.

Pobrania
91
Polubienia
7
Ocena
0

Osprey Suppressor Style Tracer Unit

I made a tracer unit in the style of the Osprey suppressor which uses a small 7,4V LiPo battery and a couple of high brightness 5mm UV LED's to light up the tracer BB's as you are shooting them. The suppressor consists of 3 main parts,…

Pobrania
90
Polubienia
21
Ocena
0
P
PrintablesPoseidonDesign

Airsoft Mock Suppressors

Mock suppressors to replicate some current real steel offerings. Designed to print without supports. All models should be printed with the threads down on the build plate. I also recommend using variable layering to improve thread quality…

Pobrania
87
Polubienia
11
Ocena
0