12 658 modeli
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Wydruk około 4,10 €–5,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
WHERE GEN2 BEGAN This is the design that started everything. In 2019 I printed a single storage drawer to organize supplies for a used Prusa MK2. In January 2020 I shared it here as the Lack Enclosure Drawer, and it went on to be…
Wydruk około 4,03 €–4,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. In case you have the injection moulded part delivered with your Original Prusa MK3S+ printer, check the alternate version:…
Wydruk około 6,94 €–8,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a copy of a LEGO treasure chest. The model is 10x bigger (1000%) then the original.The chest in the photo is scaled at 40%. It cost me about 6 hours to design this chest. I used the original chest for reverences. The difficult…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
These are a portion of the files from https://blog.prusaprinters.org/mmu2s-printer-enclosure/ that have re-arranged/modified for printing on a Prusa Mini It doesn't include these parts because I assume you are enclosing a mini and don't…
Wydruk około 2,07 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print 4 of these to add a third table to the bottom of a lack enclosure, for additional height. I have lowered the overall height the legs will stand on by 12mm, and removed the slots for acrylic sheets from the original design. Print…
Wydruk około 9,72 €–11,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was printed with a 0.6mm nozzle, & 0.35mm layer height.
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
A small can opener that you can also use to close the can that no bees or instects find their way into your nice and cooled beverage. Use custome supports in the blue marked areas. If you like to, check out my other designs too!
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
When I was looking for ring box model, the design by KodyPhelps stood out from the others. It is both simple and elegant, with a clever collapsing mechanism. Clearly, a lot of thought and effort went into the design; the tolerances are…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"Linear advance" (also called "K parameter") controls how to compensate for the pressure difference between “slow” and “fast” extrusions. This value needs to be correct for clean high-speed prints and depends on the extruder model, nozzle…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
PRUSA MINI EDITION Is your print enclosure "lacking" storage? Well I have the solution for you! The Lack Enclosure Drawer unlocks the incredible enhancement of storage for your enclosure in a new and exciting way. *Also works great as an…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
Wydruk około 7,20 €–8,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Add Nov 2021 slider to lift the roof plate when closing the door Fits perfect to an IKEA LACK table with 55x55cm Or you us a 550x550mm wood plate. no disturbing table feet's you have full view access to your printer. It is designed for…
Wydruk około 13,98 €–17,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cable clips supplied with the original Lack table enclosure project are fine for larger cables or ribbon, but rather oversized for small wires like power for LED lighting. This is a small version of that clip, for just that purpose,…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I probably won't use this for my final setup but someone might find it useful. Use the plastic rivets to secure it to the top of the enclosure. I made sure there was clearance. It's designed to be used with the PTFE tubing that comes with…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity Tape measure holder
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Yet another tool holder for the Original Prusa Enclosure. Already prepared to be extendable with some holes in the bottom to attach clips for example. If you want to mount it on the left side instead, just mirror it in PrusaSlicer. The…
Wydruk około 8,18 €–10,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello 3D-Friends, this is a ready to print gcode for Prusa XL to calibrate the k-factor for pressure advance (linear advance) for PLA. It was created with Prusa Slicer 2.8.1 and this great site:…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
I had issues with the original design in the Original Prusa enclosure. It wasn't wide enough, so the spool wouldn't spin properly and would bind. I also had the ABS split when I put on the original stick, so made that a bit larger on this…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…
Wydruk około 5,64 €–6,90 € nettoWstępna wycena jednego wariantu
I've designed this for a 3D Printing enclosure controller I'm building using a Raspberry Pi 4. Design Features 1.6mm thick walls for sturdy construction 4 x 11mm knockouts for panel mount DC barrel jacks 4 x 6mm knockouts for panel mount…
Wydruk około 2,10 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
CZ: Boční boxy na nářadí a příslušenství určené pro Originál Prusa Enclosure v kombinaci s tiskárnami Prusa MK3/MK3S/MK3S+. Pokud byste si chtěli modely upravit pro jiný typ tiskárny (například pro MK4), přiložil jsem i zdrojové soubory…
Wydruk około 7,62 €–9,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
=== Update === Uploaded a mirrored version plus spool holder rod for a third spool in the enclosure. Perfect for drying filament while printing other stuff. === Update === Second spool holder for original prusa enclosure. Ideal for manual…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Assembly Instructions Set the ferrite core in the holder. Fasten from the back of the frame with screws. To mount the holder you will need the following fasteners: M3x8 screw (2x) Print Instructions print settings: 0.30mm DRAFT filament:…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
Wydruk około 4,12 €–5,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa enclosure Print resolution: 0.2mm Infill: 40%-70% Material: PET-G 6mm Plexiglas 1,2 m2, aluminium profile 20x20mm Supports: Yes ----------------------------------------------------------------- You'll need: Some PET-G filament 6mm…
Wydruk około 41,38 €–50,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall bracket for spray nozzles of an EAWONGEE 4000 pressure washer gun Printed in PETG MK4 IS 0.2 Filling 15%
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena jednego wariantu
This is a modification to the Prusa Mini electronics/controlboard enclosure top cover to add a 4010 cooling fan. This modification will provide active air cooling to help keep everything cool especially over long prints (18h+) in hot…
Wydruk około 5,64 €–6,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
Wydruk około 12,26 €–14,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This waste bin fits the Prusa MK4 in the original Prusa Enclosure. It has a cut-out at the front to accomodate the printer holder. It includes the two hooks added by Eisvogel so that the waste bin can be attached to the frame of the…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
printed with: Prusament PLA Galaxy Black support necessary
Wydruk około 7,55 €–9,22 € nettoWstępna wycena jednego wariantu
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…
Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena jednego wariantu
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Wydruk około 5,29 €–6,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Wydruk około 6,41 €–7,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Yet another tool holder for the Original Prusa Enclosure.
Wydruk około 7,26 €–8,88 € nettoWstępna wycena jednego wariantu
MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Enclosure for XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage Low Power Disconnect Output Board. Includes buttons, cover, base box.
Wydruk około 2,54 €–3,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello friends from all over the world :) This is my first 3D-model on printables. A friend of mine has the original Prusa enclosure for his mk3s+. With the air filtration system and the LED strip, there are a few wires to guide along…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Small ( < 20g! ) mount that keeps the light source behind and the camera out of the way of the toolheads. Assembled with one M4 heat set insert. Secure in corner by first pushing through the two side pegs and then securing the heat set…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nancy Drew Treasure Pendant.
Wydruk około 2,73 €–3,34 € nettoWstępna wycena jednego wariantu
I created this Magnetic Waste Basket to provide a convenient place to hold filament scraps and imperfect parts right at my Original Prusa MK4 printer - instead of having to constantly make the trip to the plastic recycling bin. It…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the great design from Punkgeek. The length is reduced to 21,5cm to fit on a Prusa Mini plate. I left the angle to 30° but I changed the width to 10mm for my WS281x led strip. You can print 2 of them per side of the…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The new Prusa case comes without a fire extinguisher, but I think it's a good idea to install a smoke detector and fire extinguisher directly into the case, especially if you're not always watching the printer. I used the "Fire Cookie”…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 3/19: needed a taller structure. It was faster & easier to do an extension “stick” and a coupler. Plus, this way, several extensions can be used if desired. Also added an optional cable holder in the coupler. Simple enclosure &…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Enclosure for TTGO T7 ESP32 Board and a LiPo battery Designed for portable use of the TTGO-T7 ESP32 development board. I recommend supports for the clips on the part that holds the ESP32 and slides into the case. Fits into a trouser…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Lack Enclosure Corners/Cones if you are using a third table for height. Positively locates top two tables on 3rd.
Wydruk około 10,58 €–12,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
It's designed to fit with the https://www.printables.com/model/252904-transport-handle-for-original-prusa-enclosure. It can fit 6 spools of 1 kg and it can accommodate 2 kg spools. For mounting use: 4 m3 nuts 2 18mm m3 bolts 6 12mm m3…
Wydruk około 3,16 €–3,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a spool holder for either a 2kg spool or 2 x 1kg spools to put on top of my DIY Prusa enclosure. I remixed the single spool holder, which was itself a remix of the 5x spool holders. It can hold: one 2kg spool two 1kg spools three…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
I found that the original spool holder designed for the Ikea Lack Enclosure was overly complex with the printed rollers. Additionally, with jerky printer movements, spools could unseat themselves and roll away. I designed this simple more…
Wydruk około 7,24 €–8,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Filament Roll Adapter for Geeetech Filament, fits these Lack Enclosure V2 spool holders: https://www.printables.com/de/model/3673-mmu2s-enclosure
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my first attempt to build a 3D printer enclosure for my Prusa i3 MK3S. I used 0.060" (~1.5mm) 2'x2' (~610mm x 610mm) sheets of polycarbonate since I already had them from another project, but the polycarbonate is definitely not…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Some electronics devices with display and adjustment buttons are quite impractical to have standing horisontally on the table. To solve this problem you need tilt feet printed and mounted on you enclosure. When I assembled my RD6018W…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made a Filament passthrough with M10 coupler to go though a 7 to 8.5mm thick enclosure roof. Hole size to drill for fitting is 12mm Print settings: I recommend .15 due to how small they are, I would also advise supports for M10 coupler…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Replacement for the default Lack enclosure top inserts for feeding filament into a Lack enclosure. No glue. Top should take a 4mm PTFE tube; bottom feeds 1.75 mm filament. Print instructions Print bolt shaft upright with a 0.4mm nozzle…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Remodel from pegboard version link below. Firstly I removed the pegboard holder aspect and added 4 x 4mm holes as I was looking to mount onto wooden shed wall. It became obvious once printed that this was for much larger tape measures…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have extended the lengths of the spool holder and the filament guide so it accommodates a 125 mm wide spool.
Wydruk około 5,48 €–6,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why I really like DaHouzKat's idea , but I also like the clean look of the original design. You'll need 5x M3n nut 2x M3x12 screw 3x M3x8 screw 1x PTFE tube (around 65cm long) (optional) 1x Zip-tie There is a high probability you'll have…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compatible Angled feeder to feed five filaments of MMU with PCX M10 ptfe connector. Ideal to place on top of lack enclosure. I'm using with PC4-M10 connectors. Gcodes sliced with PrusaSlicer 2.4.1 version.
Wydruk około 1,54 €–1,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosure for an LM2596 buck converter. To remove cable strain completely the anderson connectors lock into the case, it produces a cleaner look and works very well. This works with 15/30/45A anderson connectors like the ones in this kit…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alternative door handles for Ikea Lack enclosure Required materials: 4x 8x3mm magnets 2x 3mm countersunk screw Fits 3mm thick doors print the second handle with the mirroring function in your slicer
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
