Liczymy pasujące modele…
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
Remixed Voron printhead for Phaetus Rapido v2 UHF. Extended fan ducts to specs in Phaetus model without lowering hotend.
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder. (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf) This…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
I made a modification for the Rapido 2 UHF hotend that works with the Stealthburner front hood. This way, you don’t need to print a new front —you can use your existing one. I created an extended duct to improve airflow under the nozzle.…
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Hex Version.
Kofferraum für den S50/S51. Deckel und Körper sitzen sehr straff zusammen. Ich habe die Dateien vom Vorbesitzer übernommen. Die STL. Dateien sind falsch skaliert. Diese müssen auf 10% skaliert werden, damit diese passen. Die 3mf Dateien…
This is a Voron Stealthburner for a Rapido UHF with A CPAP and a toolhead PCB. Please note that I didn't print it myself but did only the CAD work. If you encounter problems or see ways to improve the construction, please let me know. You…
modified Rapido mount for EVA 3 by removing the overhang
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
The Knomi 2 Stealthburner cowling, but for use with Rapido UHF. Prints with Voron slicer settings.
Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Plain Version.
Stealthburner toolhead for the Haldis Red Lizard K1-UHF. This is a Rapido style hotend which can be found at Aliexpress . It features a 115W heater while still fitting the regular Stealthburner front. Rapido speeds for a lot less $
Description This is a custom X-carriage designed specifically for the BigTreeTech Eddy Bed Level Sensor , based on the original Voron 2.4 X-carriage . Instead of the standard probe mount slots, this remix uses insert nut positions ,…
2 différents clamps for VHF/UHF ANTENNA PVC BOOM. First fixed element clamp. second element tiltable at 90deg. The element comes into force in the clamp. The element clips onto the boom. See the video to remove it. 04mm for éléments and…
Mod for Rapido UHF with Knomi and HEX design face. No need of MMU, just 2 colour swaps.
Parts Needed: - Baofeng BF888S UHF HT - Heltec V3 - M3 x 30mm Allen screws and nuts - Some soldering required
Assembly: just like the stock Stealthburner follow the Voron-Manual Printing: Recommended Voron Print-Settings Credit to @DavidC_435875 Huge thanks to David for fixing the STL for Cura slicer, i wasn't aware that there is an issue with it…
Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…
Beacon Rev D and another for Rev H.
stealth burner Rapido v2 UHF ERCF Filament cutter with longer ducts
Screwable caps for UHF type connectors according to 5/8 - 24 UNEF
It takes a scavenger hunt to find an acceptable DragonUHF adapter for EVA3. And the one I found has cable-routing issues. I modified it to give extra space for the heater cable to come out the side. It's still not perfect but it's good…
Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…
Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI v2 Stealthburner face plate. Step file has 18 non-manifold edges, but prints ok.
Welcome to XOL-Metrix UHF for the SV08 ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…
This is a wip mod, and it's currently used just on my printer. Consider it as a prototype! I recently received an Orbiter 2 extruder and wanted to use it with my Mantis CPAP and Rapido UHF setup. So I modified the LGX Lite mount to be…
This fixes the dragon uhf stealthburner mount to work with Voron TAP. I also fixed the weird geometry in the bottom mounting holes that were causing print issues. This is just the rear piece. You can grab the rest from…
This is a simple revision to the StealthBurner Print head for Phaetus Rapido 2 to fix the next-G.The neXt-G is the same overall height as the Rapido but does not taper towards the top. I just made the model fit the neXt-G width. This is…
It is recommended to use it with the new super powerful D3vil Design Typhoon 5015 fan : https://www.aliexpress.com/item/3256808498095211.html
EVA 3 Beacon Probe UHF / Volcano Ducts (Heat insert).
Overview This remix of the EVA 3 Beacon Probe UHF Volcano Ducts is designed to be compatible with the latest Beacon3D Rev H, a high-performance 3D printer component that enhances precision and efficiency in the printing process. By…
Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail
Toyota Hilux N80 UHF Radio Microphone Dash Mount Keep your UHF radio handset within easy reach with this clean, purpose-built microphone mount designed specifically for the Toyota Hilux N80 (2016–2025). This is a completely original…
Passend zum EVA-2.3 System Hier wurde der Luftkanal entsprechend angepasst, so dass das Bauteil nun richtig gekühlt wird.
Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead
For the UHF stealthburner cover with CPAP and two piece PCB I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter…
Print using standard Voron printed parts settings.
Support is optional on the bridge in the middle (I used it personally). Will require m3x18 screws. Pre tap the holes in the spacer for easiest installation. Tested and working on stealthburner with beacon rev.h and dragon uhf.
sovol sv 08 toolhead Version UHF for RAPIDO
Joined Panzarkatten's HEX Remix 3DO UHF with Big Tree Tech's Knomi 2 .
works as a drop in replacement for happy crab docks or the frame for the modular docks . you still need to print the rest of the SB docks, can be found here . part can be printed with the front face oriented on the build plate and support…
0.15-0.2 to print those threads. Use them to protect outdoor equipment from dew - ie, cable extensions
This is yet another remix of the Stealthburner Rapido Printhead for the Rapido UHF. The thing that sets this one apart is, rather than extending the printhead as others have done, I reangled the cooling outlets and redid the internal air…
This is an X carriage mount for Stealthburner for the MGN12 rail in the UHF/Volcano lengt Check your clearance to see if the specified ~2mm height difference to the nozzle fits (may vary depending on the nozzle)
DVBT / DVBT2 Antenne. Nur für Private Anwendungen ! Erstellt nach Recherchen im Netz: MOXON UHF / 690 Mhz / Kanal 48 kann bis zu 5dB bringen. Angaben ohne Gewähr. Ich habe Kupfer-Lack-Draht (1,5mm Durchmesser) entsprechend vor gebogen und…
We purchased a a DBJ-1 antenna (https://edsantennas.weebly.com/) for our ham radio a few years ago back. This bracket I designed allows me to mount the antenna to an old TV antenna pole we have at the back of the house. We used a couple…
Printed using the normal Voron settings.
0.15-0.2 to print those threads. Use them to protect outdoor equipment from dew. Tri-wing design is made for easy grip on my fingers, scale up or down the top part if it isn't your cup of tea.
It contains the toolhead plate, which should be milled from aluminum, as well as the modified printing part so that the Dragon UHF can be used together with the Beacon Probe. All other printed parts can continue to be used.
Recommended filament: ASA-CF, ASA, ABS. Infill 25-30, 0.2 mm layer.
Přináším další verzi VHF UHF dipól antény vyrobenou Z prvků staré TV antény. Průměr prvků je 6 mm. Délka pro 2 m (170 MHz) je 2x 39,5 cm, pro pásmo 70 cm (445MHz) je 1x 29 cm, samozřejmě lze naladit změnou délky pro požadované frekvence.…
This is altered original toolhead part for Afterburner to use Phaetus Dragon UHF hotend, couldn't find one when I was building some in 2022…
I remixed Datura's CPAP Stealthburner to make it work for my Orbiter 2.0 (just a little cut-out for the filament latch) and my Rapido UHF. Two versions are existing - one with the original SB size and one matched to the UHF.
this is a part kit to make an Antenna from : 8mm fiberglass rod plastic screws tape measure BNC connector 10cm of wire NOTE: gamma match not pictured the “pistol grip” was modified from another user design, here is the original:…
SB-UHF (long version!) I share my toolhead because I was asked for it, I specify that I did not create the models and I do not wish to appropriate their design, it is an assembly of parts that I researched and that I have modified to…
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
This currently only works for the Rapido UHF but if anyone needs it for another hotend leave a comment and I will try to add that too. I also added the STEP file in case you want to modify it yourself. The Y Offset is 22.6mm. Notes: Use…
I have modified the original NG X carriage to mount the Xol toolhead while not losing any X or Y build volume and be as close as possible to the stock toolhead in terms of reach allowing (hopefully) full compatibility with tools mounted…
This is a modified mount designed to let you use the stock Voron 2.4 XY endstop locations with the XOL toolhead. It’s based on the BTT Eddy UHF sensor mount for XOL, but enlarged to ensure proper alignment and contact with the stock X…
SB-KNOMI-SB2209/2040-UHF-LGX_lite (Yess i had a bit of Ringing)
WARNING: The ribbon cables on the fokoos odin are dangerous, and not meant to be use on motion area. The ends of the ribbon can easily "unglue" and overlap the next one, and the way they designed it can create a short (there should have…
StealthBurner cowling for KNOMI 2 With Rapido UHF Kumiko This Fancy Kumiko SB Cowling was a special ask from a fellow Voron member and took quite a few hours to get the Kumiko pattern to follow the contours of the SB. But the hard work…
2mm wire 4x M3 screw Pro výpočet délky drátu použij dipol kalkulačku z internetu. Za pomocí analizeru doladit na požadované frekvence. To calculate the length of the wire, use the dipole calculator from the Internet. Tune to the desired…
Since I'm running Rapido UHF, I remixed the original part of MLoeko The UHF part is based on the work of bythorsthunder: https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf
Remix of K1-UHF mount for Filametrix
Mount the Btt Eddy on the inside, see the picture for reference. Adjustable - works event for UHF mounts! The thickness of the case is around 1.2mm, and the best results are when it's mounted at 2.95mm. If mounting with the case, try…
I found one model that was close to what I needed but lacking few things to be perfect. When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido…
Stealthburner x carraige with lowered probe suit Rapido UHF and Omron or Eddy probe. Larger hole for x stop wiring/plug.
i have a klickyNG probe and ,recently installed Rapido UHF hot end which has a longer nozzle than most hotend out there. use voron recommended specs to print the mount. ABS+ I recommended
This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired
When using a Mellow V6 Pro adapter ( https://www.aliexpress.us/item/3256804525082538.html ), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the…
Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio. Side rails are 8mm thick. They are tall enough to leave an air gap under the radio. Printed with PETG, 20% infill, on Prusa MK2. Used…
I saw the STEP files and made them to be 3D-printed with PETG.
Modified some files to accomodate the Phaetus Rapido UHF Hotend.
This mod is based on EVA 2.4, it uses the rear from EVA but has the front and the other parts heavly reworked. I made this mod to have a sturdy hotend lock, without hard overhangs, becouse i needed to print in PA-CF. You will need 4 x M3…
Lowers the probe on the MGN12 x-carriage to suit the Rapido Plus 2 UHF length. The lower clamping nut and bolt have had to be relocated and you will need a shorter self tapping screw on one of the endstop switches. Apart from that, this…
added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original added the slots for some vertical adjustment Print either as provided with supports, or with the toolhead-side…
Dragon UHF hotend + Sherpa MINI mount for Ender 7 To mount it, break out the two upper threaded pins. Here I recorded a flow rate test:
Beacon Stealthburner mount, accommodates the longer volcano nozzle of Ultra High Flowrate hotends (eg. Rapido UHF)
I ran into the problem that the ABL mount designed by Jonspaceharper works great for mounting the eddy coil with none UHF hotends. The distance from the bed was to large to be effective when running the Dragon UHF hotend. This was modeled…
This 1x3x3U Gridfinity block has a place for PL-259 and S0-259 connectors, and keeps them handy when testing a Ham or CB Radio.
Discover the Ultimate Stealthburner UHF! Are you searching for a Stealthburner UHF that perfectly integrates with your Rapido 2 setup and has room for everything you need—like the 3DO-Nozzle Cam V2 with LED, CPAP, Knomi V2, and of course,…
Modified Beacon RevH UHF mount for Cartographer V4 compatibility. The mounting point is shortened to clear electronic components on the Carto v4 PCB that would otherwise interfere with the original mount design. Perfect for Xol/A4T…
the original didn't have room for the UHF adaptor. I modified the step file to mimic the UFH adaptor
Hi, Before I switched over to XOL, I was using nozzlecam in SB and I was more than happy with it, so wanted to keep that feature with XOL, however haven't found ready made mounts. My CAD skills aren't great, but it fits & works. All is…
Remember to leave a make :) For your convenience, I created a set of distances from 13.50mm to 17mm in 0.5mm steps. To figure out which one you need: Measure nozzle distance to X-carriage bottom. You want 2.6mm to 3mm spacing from the…
The J-Pole antenna 3-D printed parts are comprised of the Bottom Cap (Hub) , Bottom Cap Lid and the End (Top) Cap. These parts are used with the plastic pipe which houses the ribbon-cable made J-Pole antenna. The parts are designed for…
Beifahrer Handyhalter hier für ein S23 Ultra hoch oder quer
This is not a small size mjolnir, that is impossible due to interference of the xy joint. This is an archetype core for using a small size hotend on a medium size mjolnir. Basically, it can be used with any hotend that uses a combination…
I designed these element mounts to build a dual-band Yagi antenna for portable amateur radio satellite operations and UV-K5 transceiver. For the boom, I used a 20 mm plastic tube used for electrical installations. Antenna elements - 6 mm…
Cartographer mount for Yavoth UHF cowl. Just add spacers for your Cowl/Hotend combination.
1/12/2026 - Added a knurled cap as an alternative. Source files updated I wanted to add dust covers to a couple of projects so I drew this up. The model is threaded to screw on securely and includes a provision for tethering with a 3.2mm…
