Wyniki wyszukiwania: v0

Sortowanie

4481 modeli

P
PrintablesNils Kal

MK3 (s+) Stealthburner V0.5 - compatible with MK3s+ Extruder

MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…

Pobrania
831
Polubienia
389
Ocena
4,85
P
PrintablesMaxim7745

Nozzle Z Offset Search - Sovol SV06 Version

Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…

Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
818
Polubienia
78
Ocena
5
P
PrintablesTJL

Updated Generic Camera Mount for SV06 & SV06+

This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
441
Polubienia
75
Ocena
5
P
PrintablesTascanis

V-Slot Covers for Sovol SV06

Tested different V-slot covers available on this site, as you can see on the makes on my profile, this was the best fitting cover, has a very good press fit but is still easily removable. Available you'll find a file containing every…

Pobrania
319
Polubienia
41
Ocena
4,75
P
PrintablesDiodenschein

VW e-Golf snow excluder V0

In some places in the world it occasionally snows. If this happens while your car is charging the snow melts in your charging port and freezes again. This cap helps keeping the snow out. This was designed by me for Timo from a 3D scan…

Pobrania
216
Polubienia
37
Ocena
0
P
PrintablesMaxim7745

Oxplow Mesh Bed Leveling Z Offset Search Pattern - 25 Points - Sovol SV06 Version

Designed this print to help me dial in each location in a 25 point manual mesh bed leveling grid (individual offsets can be edited). It is an improvement on my previous test pattern as it now searches for the correct Z height when…

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
178
Polubienia
9
Ocena
0
P
PrintablesMaxim7745

Oxplow Nozzle Z Offset Search - Sovol SV06 Version

This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…

Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu

Pobrania
175
Polubienia
17
Ocena
5
P
PrintablesBassettDesigns

Ender 5/SV05 Swivel Top Spool Holder

Overview A top mount adapter to move the side spool holder on Ender-5/SV05 style printers to an easier to access location. This helps support direct drive Cartesian cube printers without excessive straight lengths or long reverse bowden…

Pobrania
166
Polubienia
20
Ocena
5
P
PrintablesJeremiah Mahler

Mini-Scraper-v02-6x3mag

A Mini Scraper version 2 with an embedded 6x3 mm magnet. If you use the provide Gcode for a Core ONE it will stop at the layer needed to insert the magnet. If you aren't using that you can easily add a pause in PrusaSlicer. I used a 30%…

Pobrania
63
Polubienia
6
Ocena
0
P
Printablesjb

SV06 Fysetc ADXL345 RPi 2040 USB C input shaper mount

The Fysetc usb c input shaper devices work amazingly and are super cheap; just plug and play with no fussy wiring. I wanted a way to mount these solidly to the SV06 for measurements without using too much plastic. Came up with these…

Pobrania
62
Polubienia
10
Ocena
0
P
Printableslukakovacica

Smaller Trays for Hilti Consumable Case v0.1.8

Smaller Trays for Hilti Consumable Case Fully configurable OpenSCAD model for smaller trays, compatible with the Hilti Consumable Case (part number 2195565). Printing guidelines Setup OpenSCAD and export the stl file (optional) Optionally…

Pobrania
56
Polubienia
5
Ocena
0
P
PrintablesJoe W

Ender 3 Tool Holder - Expanded for Sovol SV06+

My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesTJL

Sovol SV06 Decorative Magnetic Screen Cover

Sovol SV06 Magnetic Screen Cover utilizing 6x2mm or 6x3mm magnets. I had not realized that the Sovol SV06 Screen was on a ferrous metal plate. For some reason because it did not look like sheet metal, I thought it was something else. Then…

Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu

Pobrania
52
Polubienia
11
Ocena
5
P
Printablesbart

Ooznest Workbee Z1+ quick-swappable magnetic dust shoe v0.3

Intro This is an updated and modified version of my previous Workbee dust shoe . The previous version had a wing nut sticking out of the side (which I found a bit annoying although it wasn't hitting the Workbee frame) and the attachment…

Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
33
Polubienia
4
Ocena
0
P
Printablesboudys

Prusa_i3_mk3s_black_PSU_replacement_frame_brace_light_M4-bolt-holes_by_boudys_v01

Prusa_i3_mk3s_black_PSU_replacement_frame_brace_light_M4-bolt-holes_by_boudys

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesOT

XY Dämpfer Füße SOVOL SV03 und alles Mögliche

Kleine und große Schale am besten aus PLA drucken, da das gut aufeinander gleitet. Etwas Silikonspray (Blattglanz) hilft auch gewaltig. Um die Innenschale dann etwas Nachrüst- Fensterdichtung kleben und in die Außenschale quetschen.…

Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesJC

HALO 3 inch LED can light mount - V0FR (Designed for PRUSAMENT V0 Fire Retardant Filament)

Could not find a 3 inch LED can light mount. So I designed one. Originally printed on my PRUSA Mini in PLA to test fitment. Now I have PRUSAMENT PETG-V0 (Fire Retardant) filament to print in. To keep V0-FR rating you must not change…

Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesPavel Koudelka

MK3 (s+) Stealthburner V0.5 - s krytem ventilátoru a s otvory na lepší chlazení

Používal jsem už původní model, ale přisávání horkého vzduchu od výtisku zhoršovalo kvalitu tisku a tak jsem si stáhl vylepšený, který tiskl přeci jen lépe. Ovšem i ten jsem si upravil odstraněním horní části, aby se lépe chladil motor…

Wydruk około 2,98 €–3,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesChristian Vick

CV's OrcaSlicer Presets V1.5.5 for SV07/Plus & klipperized SV06/Plus

Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…

Pobrania
7238
Polubienia
455
Ocena
4,81
P
Printablesrogerquin

Cable Chain ( SPINE ) for SOVOL SV06 3d printer extruder cable

This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…

Pobrania
7060
Polubienia
1434
Ocena
4,86
P
PrintablesCoffeePrintDE

Honeycomb Wall SV06

This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size. The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the…

Pobrania
5802
Polubienia
674
Ocena
5
P
Printablesrogerquin

Heatbed Cable Support for SOVOL SV06 / SV06+ 3d printer

This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…

Pobrania
5591
Polubienia
567
Ocena
4,94

The Nautilus - Sovol SV06 Fan Duct 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Pobrania
3737
Polubienia
378
Ocena
4,9
P
Printablesbassamanator

Sovol SV06/Plus/ACE Extrusion Seal

SVO6 You need 2 x 173.5mm in length each to fill each groove (a ~1mm gap will remain). Scale the length if you need to. SV06 Plus I'm told by user @ThomasAlbrecht that to cover both extrusions fully, you need 4 x 223mm. SV06 Plus ACE I'm…

Pobrania
3704
Polubienia
448
Ocena
4,82
P
Printablesthrutheframe

Bento mini for Bambu Lab X1C P1P and Voron V0.2

UPDATE 8 Apr2024 I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes,…

Pobrania
3237
Polubienia
1052
Ocena
4,98
P
Printablesbraga3dprint

Sovol SV06 Strain Relief

If you own a Sovol SV06 3D printer, you know how important it is to keep the bed cables secure and protected. That's where the SV06 strain relief comes in - with its straight and lifted versions, it helps to prevent the cable from rubbing…

Pobrania
3222
Polubienia
300
Ocena
4,91
P
Printablesmak77

MAK PrusaSlicer Preset for Sovol SV06 / SV06 Plus

PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…

Pobrania
3009
Polubienia
175
Ocena
5
P
Printablesjoescalon

SV07 Plus Slicer Additions

Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus. Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with…

Pobrania
2624
Polubienia
109
Ocena
5
P
PrintablesNadir @ CN3D

Sovol SV08 Panels for the Enclosure

Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…

Pobrania
2616
Polubienia
213
Ocena
3,75

Sovol SV06 / Plus Extruder Colling Fan 5015

Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…

Pobrania
2566
Polubienia
336
Ocena
4,82
P
PrintablesRappetor

Sovol SV08 - BTT Eddy Mount

What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…

Pobrania
2549
Polubienia
236
Ocena
4,95
P
Printables3DPrintDemon

SV06 PLUS Vortex V2 Adjustable Cooling & LED System

…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…

Pobrania
2479
Polubienia
409
Ocena
5
P
PrintablesNadir @ CN3D

Sovol SV08 Top Hat

WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Hello guys I want to share with you that Funssor is selling our design so who want to buy this Top Hat already Printed with all the Hardware you…

Pobrania
2443
Polubienia
342
Ocena
4,85
P
Printablesrogerquin

LCD Display Back Cover for SOVOL SV06 3d printer

This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…

Pobrania
2435
Polubienia
267
Ocena
4,96
P
PrintablesValerie Moore

SV08 Extruder fix

The rod that goes into the extruder idler gear on the extruder arm likes to come loose. this will fix that. i have to push my pin back in after long prints or i end up with extreme under extrusion. this keeps the pin from getting to that…

Pobrania
2424
Polubienia
356
Ocena
4,97
P
PrintablesSavageLau

SV06 Tool holder

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Pobrania
2320
Polubienia
290
Ocena
4,87

Voron V0 Stealth Handles

V0 Stealth Handles Stealthy and stylish handles for your Voron V0 These handles replace the top center panel clips, and fasten with M3x12 screws. Printing The STL files are already oriented for printing. No supports are required. Yes,…

Pobrania
2213
Polubienia
363
Ocena
5
P
Printableskampfwuffi

Sovol SV08 - Optimized Macro.cfg & printer.cfg / Orca G-Code & Settings (Github now)

Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…

Pobrania
2212
Polubienia
190
Ocena
4,83
P
Printablesbulbasaur0

Sovol SV06 Plus Heat Bed Cable Support Bundle for tight spaces (now V2!)

Update! -- November 29, 2023 I have recreated my remixed frame strain relief support model from rogerquin's original model using OpenSCAD ! By default, the recreated frame support is the same as before. However, the OpenSCAD model…

Pobrania
2178
Polubienia
238
Ocena
4,94
P
PrintablesNadir @ CN3D

Xenomorph Toolhead for Sovol SV08

27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…

Pobrania
2151
Polubienia
327
Ocena
5

V0 Upper-Rear Bowden Inlet (URBI) for Voron V0

V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…

Pobrania
2116
Polubienia
394
Ocena
5
P
PrintablesJackJack3231

Voron V0 Auxiliary Fan Ducts

About Voron V0 Auxiliary Fan Ducts These are auxiliary fan mounts for the v0, which you can use if you need extra cooling on your Speedbenchy journey. The ducts can be easily installed after the Printer has already been fully assembled,…

Pobrania
2047
Polubienia
547
Ocena
4,97
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Pobrania
1995
Polubienia
158
Ocena
4,92

SV06 5015 part cooling duct

V5 Duct added, has better aimed cooling but i have not tested yet Rear mounted 5015 parts cooling duct for Sovol SV06 V3 released, cleaned internal geometry, made the mounts work better and gave the duct better clearance 2 M3x20 bolts and…

Pobrania
1994
Polubienia
280
Ocena
4,71
P
Printablesbraga3dprint

Sovol SV06 / SV06 Plus Extruder Visualizer / Motor Knob

Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…

Pobrania
1960
Polubienia
325
Ocena
4,96
P
PrintablesSpb2005

Sovol SV06 bed alliner

Helps you to put on your bed correctly

Pobrania
1945
Polubienia
267
Ocena
5
P
PrintablesJoshii_H

SOVOL SV07 PLA print profile (PrusaSlicer)

You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…

Pobrania
1817
Polubienia
54
Ocena
5
P
PrintablesAdrianM.

Anycubic Kobra / Kobra 2 / Kobra 2 Pro Toolbox v02

This is a toolbox for the Anycubic Kobra / Kobra 2 / Kobra 2 Pro 3D printer, which is mounted in the touchscreen area. Print the toolbox in vertical position. Print the inside component in orizontal position. You can check my other…

Pobrania
1811
Polubienia
220
Ocena
4,38
P
PrintablesMatticus Finch

Voron V0.1 Volumetric Flow Test (Superslicer, 0.4mm Nozzle)

This print increases the volumetric flow by 5 cubic mm/s for every 6mm of Z-height, all the way up to 50 cubic mm/s. Bring this into Superslicer (changing the printer setting to your printer if needed) and print it out. Be sure to stop…

Pobrania
1804
Polubienia
92
Ocena
5
P
PrintablesAllTheHobbies

Sovol SV06 Tool Storage

Wanted to make a tool storage rack for the SV06 that match the style of the rest of the printer. Has a spot for all the tools that I received with the printer as well as 5 nozzles. Its one piece that printed on the top face. No supports…

Pobrania
1799
Polubienia
207
Ocena
4,52
P
PrintablesAllTheHobbies

Sovol SV06 Filament Guide

Created a filament guide that better matches the design of the Sovol SV06. I will make a better print when I have the right colored filament.

Pobrania
1755
Polubienia
187
Ocena
4,88
P
PrintablesStatick

SV06 5015 Fan Duct Rounded

This is just a remix of https://www.printables.com/model/361794-sv06-5015-part-cooling-duct. I rounded the corners which could potentially give it better airflow. I saw someone request it in the original comments and figured I'd take a…

Pobrania
1745
Polubienia
196
Ocena
4,93
P
PrintablesSavageLau

SV06 Z Axis leveling tool (Align)

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Pobrania
1737
Polubienia
162
Ocena
4,91
P
Printablesjoescalon

SV06 Plus Profiles and Build Plate

Update 8/27: Adding Orcaslicer klipper speed profiles. Adding Orcaslicer printer profile and slicing profiles to this for max speed benchy (25:52 benchy) without sacrificing quality, and a general profile for normal detailed prints that I…

Pobrania
1731
Polubienia
88
Ocena
5
P
PrintablesSavageLau

SV06 Plus 5015 Fan duct v4.0 | Hurricane updated 7/06/23

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Pobrania
1714
Polubienia
201
Ocena
5
P
Printableskolega

WindWarden Upgrade Elegoo Neptune 3 Pro Plus Max Stock Hotend 5015 Fan Duct Adapter Beta V0.4

For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…

Pobrania
1713
Polubienia
189
Ocena
4,88
P
PrintablesMatszwe02

Locking foldable spool holder for Voron V0.2 (0 V0 0.2)

This is a modification of standard Voron 0.2 spool holder, made foldable. It's locking into folded position and extended position. This holder is extended from the standard one and should fit spools up to 85mm. Personally, it's a lot…

Pobrania
1702
Polubienia
349
Ocena
4,86
P
Printablesrogerquin

GT2 Belt Mounted Y-Stop for SOVOL SV06 3d printer

This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…

Pobrania
1678
Polubienia
234
Ocena
5
P
Printablesbassamanator

SV06/SV07/Plus Profiles SuperSlicer PrusaSlicer

🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…

Pobrania
1677
Polubienia
83
Ocena
0
P
Printablesbassamanator

Sovol SV06/Plus Frame Mounting Solution 2040 Extrusions

Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…

Pobrania
1642
Polubienia
212
Ocena
4,91
P
PrintablesE.C.3D

10 Hole Ocarina V0N3 C5 - F6

I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 This ocarina is designed to be easy printed and to be small enough to fit on my VORON0. It is supposed to be printed at the mouthpiece without the need of…

Pobrania
1546
Polubienia
156
Ocena
4,94
P
PrintablesNadir @ CN3D

Sovol SV08 Cable Chain V2

I have printed them in Polimaker Galaxy Black ABS and they are perfect! The chain and the clip can be printed without support but the ends will need support. Note: if you have bed adhesion problem when printing the clips you can rotate…

Pobrania
1542
Polubienia
195
Ocena
4,71
P
Printablesitsrouteburn

Sovol SV06 Plus Print Head Cable Support

A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…

Pobrania
1500
Polubienia
151
Ocena
4,92

Voron V0 - Modesty Mesh

These customizable mesh inserts do great job of hiding that rat's nest of wires in the back of your Voron V0. The multi-part STL can be split in the slicer, and custom infill settings applied to the inner body to create a mesh of your…

Pobrania
1480
Polubienia
287
Ocena
4,98
P
Printablesrogerquin

Cable Strain Relief for SOVOL SV06 3d printer

A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…

Pobrania
1475
Polubienia
173
Ocena
4,89
P
PrintablesSam Schultz

Sovol SV08 Orca Tuned Profile

####The orca profile here is fine but the klipper config is not only old but has issues in it. I would love to post an updated klipper config that works on .13 klipper but I have moved to mainline, incorporated eddy-ng, and some other…

Pobrania
1466
Polubienia
64
Ocena
0
P
PrintablesNadir @ CN3D

Sovol SV08 Hinge and door handle

Hello everyone New Version Is here thanks to the community members that helped with the perfect fitment In the Cad you will find all the screws and heat set insert that you will need. for those that don't know how to use a step file i…

Pobrania
1462
Polubienia
167
Ocena
4,73
P
Printableskolega

Volcano WindWarden Upgrade Elegoo Neptune 3 Pro Plus Max 5015 Fan Duct Adapter Beta V0.2

Quick to print, support-free design. The Volcano WindWarden adapter mounts a 5015 blower for improved cooling after upgrading to a Volcano hotend. No screws are needed to hold the fan — it clips in securely. The height is adjustable to…

Pobrania
1442
Polubienia
125
Ocena
5
P
PrintablesPleaseHelp

SV06 Bed Leveling Test

A quick test for adjusting your Z-Probe Offset while printing with the SV06, it draws the skirt right next to the purge line, check this in your .gcode file with your slicer beforehand. You can adjust your Z-Probe Offset while printing…

Pobrania
1441
Polubienia
65
Ocena
4,83
P
PrintablesJapple

Sovol SV06 PSU Fan Silencer

If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…

Pobrania
1437
Polubienia
218
Ocena
4,68
P
Printablesrogerquin

Raised Cable Strain Relief for SOVOL SV06 3d printer

This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…

Pobrania
1381
Polubienia
166
Ocena
4,91
P
PrintablesNadir @ CN3D

V4 Toolhead - Ideal for MMU for SV08 and any Voron Gantries

I have added the Extruder Main body and the Blade holder for KB4-F_5 Blade We highly recommend this Blade since is more reliable/ durable/ thick and it sharp! be careful! We have switched to a better Blade…

Pobrania
1360
Polubienia
222
Ocena
4,44
P
PrintablesGL3D

SV06 Clip-On Bed Aligner

I printed this in Polymaker PLA, at 100% infill. I heated the ends a little bit to make it go on nicer but it works like a charm! If you will be printing with PETG or ABS, I recommend printing it in that material. I printing in PLA since…

Pobrania
1346
Polubienia
144
Ocena
4,86
P
Printables3DprintMyLife

Sovol SV08 Enclousure

I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :) Hope you like it! Please leave a comment and like :) The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I…

Pobrania
1320
Polubienia
281
Ocena
5
P
Printables93djen

Voron V0.1 Tophat Spacer with Hinges

Voron V0.1 Tophat Spacer with Hinges Makes the tophat higher, stiffer and adds a hinge. Therefore its a lot easier to open the top and adds 20mm more space in the top for cable routing and higher Extruders. I added now also a Version…

Pobrania
1298
Polubienia
136
Ocena
4,94
P
PrintablesAvel

Sovol SV06 5015 Blower Fan Duct

I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)

Pobrania
1289
Polubienia
155
Ocena
4,46
P
Printablesedumardo

1/16 RC Panzer Tank VK-16.02 Leopard (v0.9.4)

1/16 RC VK-16.02 Leopard. Always check the latest version on https://github.com/edumardo/VK-16.02-Leopard you can follow the model development and construction on the following forums: Topic on RCTankWarfare forum (english). Hilo en el…

Pobrania
1269
Polubienia
170
Ocena
5
P
PrintablesSavageLau

SV06 5015 Fan duct

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Pobrania
1256
Polubienia
184
Ocena
5
P
PrintablesTonyB

Silicone Tube Leveling Jig for Sovol SV06 Heatbed

This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…

Pobrania
1211
Polubienia
110
Ocena
4,96
P
Printables3DprintMyLife

Sovol SV06 Camholder

You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…

Pobrania
1206
Polubienia
185
Ocena
4,85
P
Printablesbinarypickle

SV06/Plus Camera Mount

Arm to help folks mount a camera to their SV06/Plus front frame. Arm has a hole that should accommodate a variety of bolts for camera bases. Step files included if adjustments are necessary. Haven't tested with anything heavier than a…

Pobrania
1206
Polubienia
142
Ocena
4,86
P
PrintablesNadir @ CN3D

SV08 CN3D Shroud V3 Extra : Fan, Magnets Klicky + LED

Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…

Pobrania
1206
Polubienia
202
Ocena
4,89
P
PrintablesNadir @ CN3D

Sovol SV08 Belt Helper for X Carriage

I have added a big version to accommodate for V4 and for Xenomorph with Eddy You need to orient the part in the slicer this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new…

Pobrania
1205
Polubienia
220
Ocena
5
P
PrintablesDeuce

Sovol SV08 Taco Bed Fix

My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…

Pobrania
1205
Polubienia
224
Ocena
4,92
P
PrintablesKyle 🇬🇧

Voron V0 V0.1 V0.2 First Layer Calibration

Model is 100mm x 100mm x 0.24mm high. Easy to slice and print then adjust z on the fly giving you an ideal visual of your first layer. Also good for running finger nail across for finer tuning of a smooth first layer. (Also a nice easy…

Pobrania
1201
Polubienia
120
Ocena
4,92
P
Printablesub3rmario

Sovol SV06 Minimal Filament Guide

Update 2022-12-05: Added V2 which is more of a slotted opening tapered to the left and right to account for times when you print something very tall. It gives more flexibility for the filament when the print head is farther away from…

Pobrania
1188
Polubienia
156
Ocena
4,96
P
PrintablesNadir @ CN3D

Sovol SV08 Exhaust Filter

This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…

Pobrania
1175
Polubienia
195
Ocena
4,83

Sovol SV06 PLUS Better Fan Duct

No support, better fan duct for Sovol SV06 PLUS On photos you can see difference between standard and upgraded fan duct. Also check my Sovol SV06 PLUS Cable HOLDER https://www.printables.com/model/482250-sovol-sv06-plus-cable-holder If…

Pobrania
1157
Polubienia
100
Ocena
4,8
P
PrintablesTom

Sovol SV08 drag chain system

This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate. The Drag chain fixed joint and the Under the drag chain fixed joint are the original…

Pobrania
1149
Polubienia
144
Ocena
4,74
P
PrintablesAndrás Bognár

Voron V0.1 V0.2 DIN Rail Board Mounting System

I didn't like the VHB sticky tape mounted boards design on the Voron V0.1 or V0.2 so I designed a better one which is adjustable and removable. Features Easily readjust your boards if you want to. Adjustable vertical position of DIN rail.…

Pobrania
1134
Polubienia
224
Ocena
4,73
P
PrintablesLab3Dp

Voron 0.2 V0.2 Side Skirt One Piece

If you don't want to print your skirts on the V0 itself and have a bigger printer at hand, you can print this one-piece side skirt. It comes in two variations: the regular one is just like the original skirt pieces “open” the “closed”…

Pobrania
1111
Polubienia
117
Ocena
5
P
PrintablesAllTheHobbies

SV06 Extruder Cable Support

Extruder cable support for the Sovol SV06 to prevent sagging and contact with your prints. Turn off power. Remove extruder cable. Place support over the cable keeper hooks. Reattach extruder cable.

Pobrania
1110
Polubienia
131
Ocena
4,96
P
Printablesrogerquin

Spool Holder for SOVOL SV06 3d printer

A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the…

Pobrania
1105
Polubienia
161
Ocena
4,8
P
PrintablesMooshSquisher

SV06 Plus Bed Cable Strain Relief

This part replaces the one supplied by Sovol with the SV06 Plus and adds an extension off the back to provide additional support and also angles the cable up slightly to keep the cable from rubbing on the rear frame. Two zip ties are…

Pobrania
1095
Polubienia
108
Ocena
4,88
P
Printablesrogerquin

HD Filament Guide for SOVOL SV06 3d printer

This is a very easy-to-print, very easy-to-install filament guide for the SOVOL SV06. No tools are required for installation. To install, temporarily remove the spool holder tube and slide the filament guide over the spool holder arm.…

Pobrania
1071
Polubienia
152
Ocena
4,9
P
PrintablesGenericGeek

Servo Nozzle Brusher (Voron V0.1)

This is a Nozzle Brusher I designed for my Voron V0.1. Say goodbye to cleaning your nozzle manually. This device will automatically clean the nozzle upon starting a print, or at any point using a macro. A guide for installation on the…

Pobrania
1058
Polubienia
183
Ocena
5
P
PrintablesNadir @ CN3D

BTT Eddy NG Macro + my print start on my SV08

See below the .cfg attached. ;) on to the Other Files section 🛠 Sovol SV08 Klipper Macros: Tap Z-Offset, Nozzle Cleaning & Adaptive Purge Thanks to Vlad for the brilliant firmware that enables the BTT Eddy sensor to support tap-style…

Pobrania
1057
Polubienia
154
Ocena
5
P
PrintablesNadir @ CN3D

Sovol SV08 5" BTT HDMI Display

Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…

Pobrania
1044
Polubienia
170
Ocena
4,88
P
Printablesloicloic

Voron V0/V0.1/V0.2 Compact Handles

The Voron V0 sure is small but it is still a bit of a pain to carry and move around. Here're some minimalist handles which do not require any new nuts to be installed nor anything to be taken apart. They've been designed to work with…

Pobrania
1037
Polubienia
157
Ocena
4,96
P
Printablesss1gohan13

Sovol SV08 Orca Profile - Gohan (w/ filament)

**************************************Update: 7/26/24****************************************** For the most recent changes and notices about my macro setups, see my github. New updates to my profile. Now filament is added to the start…

Pobrania
1019
Polubienia
48
Ocena
0