Wyniki wyszukiwania: wde

Sortowanie

2429 modeli

P
PrintablesCaptainC

scoop for washing powder 60ml

I recommend printing it in PLA with the following parameters: 4 walls 0.15 layer height no supports

Pobrania
536
Polubienia
38
Ocena
4,83
P
PrintablesMonkey Prints

Measuring Scoop for Washing Powder | 60ml and 20ml

Two sided measuring scoop This model is a two sided measuring scoop with a volume of 60ml and 20ml for example washing powder. Most washing powders require a dosage of 60ml or 80ml. With this scoop it very easy to get the perfect amout.…

Pobrania
456
Polubienia
70
Ocena
5
P
Printablesfifindr

Slide-to-Drop Protein Powder Scoop

A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…

Pobrania
438
Polubienia
73
Ocena
5
P
PrintablesRaschmaschine

PC4-M10 PTFE tube fitting for original Prusa MINI spool holder ( reverse bowden )

This is an attachment for the original Prusa Mini spool holder which allows adding a PC4 M10 quick release adapter for a common PTFE tube. Primarily I use this for a reverse bowden setup on my MK3. Printing: any solid filament 0.2mm layer…

Pobrania
281
Polubienia
86
Ocena
5
P
Printablessteffanders

Washing powder measuring cup

simple but sturdy measering cup for washing powder. The scale measures 20, 40 and 60 ml (CAD verified). The lines are made with an extruder change in the PrusaSlicer (see 3mf file - contains 2 cups like the gcode). So sorry folks without…

Pobrania
267
Polubienia
23
Ocena
5
P
PrintablesRon Harding

Drain Insert for Hornady Powder Measure

Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.

Pobrania
218
Polubienia
33
Ocena
5
P
PrintablesKlaus

Choke bowdencable screw / Befestigungsschraube Choker Seilzug - Mikuni BST33

After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.

Pobrania
206
Polubienia
6
Ocena
5
P
Printableskennyd1gital

MEC 600Jr Mark V Shot/Powder Port Dust Cap

I load a lot of buckshot when reloading shotshells and therefore wanted a way to keep dust and debris out of the shot and powder hopper ports/charge bar on my MEC 600Jr Mark V when they're not in use. I designed these simple threaded caps…

Pobrania
176
Polubienia
20
Ocena
5
P
PrintablesOlaf

Backpulver und Backaroma Organisierer für die Küche - Organizer for baking powder and aroma

A small orgainzer for the kitchen. The depth is only 104 mm, so it fits in the narrow cupboard above the stove. There is also space for the small baking flavor bottles. The depth for the baking powder compartment is 73 mm. The small box…

Pobrania
175
Polubienia
21
Ocena
5
P
PrintablesPavel Hrčiak

Sunlu S2 adapter pro hadičku, bowden + 2x g-code

Bohužel mi nevyhovuje umístění otvoru pro vlákno tak jsem vymyslel možnost jak vést filament ptfe trubičkou až do tiskárny u které mám taky spojku pro trubičku. Model obsahuje díly pro spojku M6 a M10 (tak si vyberte co vám vyhovuje) a…

Pobrania
153
Polubienia
21
Ocena
0
P
Printables@QuinoStream

MK3s Reverse Bowden TOP - Large (8,5 cm) &Short (7cm) PLATSA

Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión

Pobrania
149
Polubienia
32
Ocena
5
P
PrintablesNorbert Happ

Creality CR10S-Pro Bowden Tube Stabilizer

I was getting tired of the bowden tube working itslef loose from the hot end on my Creality CR10S Pro so I designed this stabilizer that snaps into place without any need for screws. Note that i made a slot to push a zip-tie thru to…

Pobrania
139
Polubienia
19
Ocena
0
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Pobrania
122
Polubienia
21
Ocena
5
P
PrintablesCupertinoGeek

Dual Reverse bowden PTFE- tube Guide

Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…

Pobrania
112
Polubienia
19
Ocena
4
P
PrintablesGraloth

MK4 Reverse Bowden Adapter - Coupler edition

The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…

Pobrania
111
Polubienia
13
Ocena
5
P
PrintablesMartin v R

Ender 3 V3 SE/KE Reverse Bowden + filament sensor mount

Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…

Pobrania
90
Polubienia
16
Ocena
5
P
Printables3DHippo

Storage Container for Powder based drinks

Inside the container are ridges to see how many powder you used. You can use my cap, or you just can use every standard PET bottle cap. If you love this design and want to see more fun projects like it, consider joining my club on…

Pobrania
72
Polubienia
17
Ocena
5
P
PrintablesTitan

Monoprice MP10 and MP10 Mini Bowden Tube Support Brace

The PTFE Bowden tube on my Monoprice MP10 (Creality CR-10 clone) wasn't well supported where it left the extruder. It drooped excessively which seemed to cause unwanted friction on the filament, so I designed this bracket to resolve the…

Pobrania
69
Polubienia
7
Ocena
0
P
Printablesxarbit

Bear Upgrade (Reverse Bowden) with FESTO /Tappex Microbarb M5 Fitting

Modified the Bear Upgrade 2.1 optional reverse bowden to fit the original M5 fitting (PC4-M5) used by Prusa for the MMU2 cover. The vslot mount is available in two versions: angled or normal. I bought the fittings here:…

Pobrania
65
Polubienia
10
Ocena
0

Dacia Duster - protection against accidental ejection of the headlamp height adjustment bowden

EN: Did you also happen to dig out the bowden, which is used to adjust the height of the headlamps, while changing the bulb in the headlamp? With this cover, that won't happen to you. Print without supports. CZ: Taky se vám stalo, že jste…

Pobrania
63
Polubienia
19
Ocena
0
P
PrintablesGabriel

Simple tray for tiny sugar, backing powder and etc packets

Print as you wish, it will be hard to have it wrong

Pobrania
43
Polubienia
10
Ocena
0
P
PrintablesArerax

Easy-to-print cup for liquids and powdery materials - useful help in bathroom (Odměrka na tekuté a sypké materiály)

This cup can be used for easy scooping and measuring liquid or powdery materials, such as washing powder or fabric condioner. Or anything else that crosses your mind! It is easy and quick to print.

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesCodeModLife

Prusa Enclusure Top Mount Front Bowden Tube holder

This is a mod for MandicReally's design. I needed to run a 3K spool and used his original setup. I found that since my enclosures are kinda high, feeding the filament into the bowden tube was kinda a difficult due to my short arms. This…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesFraser Rose

Reverse Bowden Adapter

This adaptor replaces the 8*7.5mm PTFE tube clamped into Prusa's Filament Guide Addon for the standard Prusa Spool Holder. It provides a square tapered hole that 4mm PTFE tube can be pressed into for a Reverse Bowden setup. The PTFE tube…

Pobrania
23
Polubienia
2
Ocena
0
P
Printablesrendy cheng

BCN3D Sigma R17 extruder lower bowden tube housing

A direct replacement of Sigma R17 extruder lower bowden tube housing

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesAndreas

Coffee Powder Portioner Lid

Being annoyed by the crappy paper foil lid of the coffee whitener powder I use every morning, I have designed a minimal coffee powder lid with a portioning opening for e.g. "Gut und Günstig Kaffee Weißer" and other comparable brands in…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesPeter Farell

Chowder

Chowder

Polubienia
2
Ocena
0
P
PrintablesZzoyozZ

Bowden Y-Splitter for Bambu Lab X1

Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…

Pobrania
17 345
Polubienia
1709
Ocena
4,77
P
PrintablesGalvanic

Voron Bowden ptfe tube guide arm and canbus cable support

V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…

Pobrania
13 559
Polubienia
683
Ocena
4,91
P
PrintablesSHaDoW6

K1 Bowden Tube Clips

K1 cable chain clip to allow placement of the bowden tube on top of the cable chain. If your have extrusion issues this may help with the addition of a lid riser. Updated: As requested I have created a side mounted clip. Please don't…

Pobrania
6972
Polubienia
555
Ocena
4,95
P
PrintablesSHaDoW6

K1 Max Bowden Tube Clips

Made this clip for the K1 Max, from my original clip for the K1, it now is more compact, with rounded corners on top and tighter tolerances to fit snug. Have also included a newer slim model. I found that the original bowden tube clips,…

Pobrania
5539
Polubienia
494
Ocena
4,9
P
Printablesfirstgizmo

PTFE bowden tube connector

This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…

Pobrania
3749
Polubienia
442
Ocena
4,91

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Pobrania
3715
Polubienia
520
Ocena
4,89
P
PrintablesMarko Borsic

PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…

Pobrania
3665
Polubienia
543
Ocena
4,8
P
PrintablesMrFlippant

Bowden Speed Loader for Prusa XL and CORE One and similar for loading filament

Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…

Pobrania
3594
Polubienia
2202
Ocena
4,93
P
PrintablesZzoyozZ

Bowden Tube Y-Splitter with PC4-M6 Connections

Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…

Pobrania
3233
Polubienia
436
Ocena
4,82
P
PrintablesAlex Ward

Prusa MK3S/MK3s+ Reverse Bowden filament Sensor Cover

Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…

Pobrania
3074
Polubienia
411
Ocena
4,96
P
PrintablesMoshe

Creality K1C/K1/K1 Max Rotating Bowden Clip

A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.

Pobrania
2969
Polubienia
298
Ocena
4,89
P
Printablesroot Dsigns

Ender 3 V3 SE / Ender 3 SE Reverse bowden adapter

Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…

Pobrania
2813
Polubienia
443
Ocena
4,96
P
PrintablesLaisch

PTFE Bowden Y Splitter (3 way)

I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…

Pobrania
2745
Polubienia
586
Ocena
4,84
P
Printablesscmanjarrez

Trianglelab Bowden Clip

TriangleLab Bowden Tube Clip, 1.5mm thickness. Edit: Added another version 1.6 mm thickness. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 10 Filament: SUNLU PLA+ White Category: 3D…

Pobrania
2575
Polubienia
124
Ocena
4,77
P
PrintablesSshubam Verma

Creality K2 Plus Bowden tube protector

This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…

Pobrania
2504
Polubienia
170
Ocena
4,56
P
PrintablesLucio Badtaste

K1(C-Max) Bowden Tube Guide for Nu-K Riser (et similia)

I liked a lot the original print but I wanted the tube at the same height of the hole in the back of the lid riser (in my case the Nu-K that has it placed ~20mm higher than the chain). I suppose that it should fit on the K1 Max cablechain…

Pobrania
2208
Polubienia
259
Ocena
5
P
Printablesark76

Ender 3 V3 SE/KE filament guide (bowden + runout sensor)

A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…

Pobrania
2169
Polubienia
298
Ocena
4,88

V0 Upper-Rear Bowden Inlet (URBI) for Voron V0

V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…

Pobrania
2116
Polubienia
394
Ocena
5
P
PrintablesRobertoooo

Creality K2 Plus add-on to prevent extruder bowden connection damage v2

Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…

Pobrania
1785
Polubienia
214
Ocena
4,85
P
Printableskolba

Bowden collet

its that thing p.s. to prevent people from being upset - i've no idea if it fits e3d v6 or not. naturally the printed version is not as good as the real thing, but works as a temp solution while you are waiting for a pack of 50 of them…

Pobrania
1708
Polubienia
111
Ocena
3,89

Creality K1 Reverse Bowden PTFE Tube Clips

Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.

Pobrania
1664
Polubienia
145
Ocena
5
P
Printablese_namics

Washing Powder Scoop

Description: Cup to dispense washing powder / detergent. Has a ml scale on the inside. I hope you like the model! → Makes and Comments are very much appreciated :) Two V ersions Available: → New version (v6): Fully support-free design –…

Pobrania
1625
Polubienia
131
Ocena
4,76
P
PrintablesSHaDoW6

Creality K2 Plus Bowden Tube Clips

Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…

Pobrania
1575
Polubienia
155
Ocena
0
P
PrintablesG4ZO

Bowden Clips

Height: 1.5 mm. It is possible to print in resin or FDM

Pobrania
1547
Polubienia
196
Ocena
5
P
PrintablesPlebsoon

creality ender 3 5 e3d v6 hotend cooling and mount bowden

hi, this is my desing of a creality ender 3 cooling&mount for an e3d v6 hotend you will need: 1x 50x50 fan 1x 40x40 fan 11x m3 bolts 3x m3 nuts The hotend can have additional coupler on the top, there is enough space to fit everything you…

Pobrania
1544
Polubienia
176
Ocena
5
P
PrintablesSilencedFrost

UBBI - Universal Bidirectional Bowden Interconnect - an overengineered PTFE tube quick connect

Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…

Pobrania
1504
Polubienia
265
Ocena
5
P
PrintablesSandon

Fix for Creality Space Pi - bowden tube filament holder / adapter / guide

Improves the silicone rubber bushings that ship with the Space Pi Dryer and Space Pi (Plus). Designed to hold the end of the PTFE tubing in place, and prevent it from slipping inside the dryer. Does NOT work with the Space Pi X4. Internal…

Pobrania
1357
Polubienia
139
Ocena
5
P
PrintablesCrydTeam

anycubic vyper / kobra stealthburner mod (bowden and direct extruder)

Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…

Pobrania
1323
Polubienia
166
Ocena
5
P
PrintablesScharrelese

Ultimaker Style Bowden Clip

This is a quick and easy printable clip designed to hold the bowden tube of your Ultimaker in place. After inserting the tube into the fitting, pull it up and put the printed clip underneath the collet to secure the tube in place.

Pobrania
1281
Polubienia
64
Ocena
4,86
P

Remix - Clip added - PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…

Pobrania
1277
Polubienia
156
Ocena
5
P
PrintablesRon Harding

Powder Trickler

I modified the Powder Trickler by Nick van Noordwyk , to add a cap to the bottom. That made it easy to add some weight for stability. Nick graciously provided his Fusion 360 project file, which made it super-easy to make changes to it.…

Pobrania
1243
Polubienia
98
Ocena
4,67
P
PrintablesGuido

Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks.

Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…

Pobrania
1226
Polubienia
155
Ocena
4,83
P
PrintablesHiddenP56

Bowden Tube/Cable Clip (Ender 3, 3Pro, 3v2, CR-10, Voxelab Aquila)

Please Like and Download my design so I have a chance to get Prusameter bonus, thanks ! A small and easy to print clip, to hold the Bowden tube and the cables together. Fits Ender 3, 3Pro, 3v2, CR-10 Voxelab Aquila, and in fact any…

Pobrania
1220
Polubienia
185
Ocena
5
P
PrintablesCarlos Guerrera

AD5X 4-in-1 Bowden (PTFE) Tube Clips

4-in-1 Bowden (PTFE) Tube Clips Tidy up your AD5X' PTFE tubes with these clips. 5mm and 10mm versions. Prints in about 3 and 5 minutes respectively. Good project for left-over filaments.

Pobrania
1195
Polubienia
142
Ocena
5
P
PrintablesMartin_au

Sunlu S2 reverse bowden adaptor

Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.

Pobrania
1159
Polubienia
172
Ocena
4,94
P
PrintablesFreshPrints

Anycubic Drybox Filament Sensor Bracket v4 PC4 M10 Reverse Bowden Kobra 2 Max / Kobra 2 Pro / Kobra 2 / Kobra 2 Plus / Kobra 2 Neo

Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…

Pobrania
1144
Polubienia
128
Ocena
5
P
PrintablesDune

Ender 3 v2 Bowden Clip

Ender 3 v2 Bowden clips. I used the MIKA3D Silk Copper because I was at the end of the spool and didn't feel like changing out. In the future, I would probably use Hatchbox Black. I would also probably change the quality from 0.2 to 0.16…

Pobrania
1099
Polubienia
171
Ocena
4,71
P
Printablesarscreo

[gridfinity] Kitchen Packet/Baking Powder/Kitchen Powder Organizer (65mm up to 78mm wide powder packs)

Gridfinity compatible Kitchen Powder Pack Organizer with variants for standard 65mm or up to 78mm wide powder packs , with layouts for 2x2x1.2 and 2x3x1.2 gridfinity units . Additionally there are variants with a slot for easy gripping ("…

Pobrania
1096
Polubienia
425
Ocena
5

Neptune 4 Reverse Bowden Upgrade

These brackets allow you to use a reverse Bowden tube to stop the filament from pulling on the extruder and giving inconsistent extrusion. This increased print quality significantly for me. Designed to be used with either my Neptune 4…

Pobrania
1092
Polubienia
247
Ocena
4,73
P
PrintablesIconic FAB

Bowden tube and CANbus / USB cable support clips

Bowden tube and CANbus cable support clips. Oftentimes switching from conventional setup of gazillion wires into cable chains is a bit tough as there are certain challenges with this. Small things can make big difference. Challenge this…

Pobrania
1090
Polubienia
220
Ocena
4,94
P
PrintablesSam Wolfson

Voron 2.4 Threaded Bowden Retainer

This is a remix of the Voron 2.4 Bowden retainer that features an M10 thread at the back for a fitting that retains your PTFE tube . It's designed so that the fitting can be screwed into the back, and the tube pushed all the way through…

Pobrania
1076
Polubienia
197
Ocena
5
P
PrintablesTomTom

Ender-3 Sprite (Pro) - Reverse Bowden (PTFE) Holder

holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer

Pobrania
1067
Polubienia
139
Ocena
4,71
P
PrintablesHwGeek

Creality K1/MAX Bowden Tube stress relief

I just got the Creality K1 and I wasn't happy how they plugged the Bowden tube, there is too much force/stress on the plug on top of the extruder while it moves, So I designed this simple part to be fixed by the Drag Chain screw. Just…

Pobrania
1015
Polubienia
89
Ocena
5
P
PrintablesArtSuzhou

Solder Scroll with PTFE Bowden tube tip

The tip is modified to house a 30mm PTFE Bowden tube to help apply the solder close to the components.

Pobrania
1006
Polubienia
419
Ocena
5
P
PrintablesRobertoooo

Creality K2 Plus bowden tube clip

This is a narrower bowden tube clip to hold the PTFE tube on top of the cable chain so that it doesn't touch the glass. The original factory K2 Plus clips tend to release and slip off the chain after a while, and misplacing them limits…

Pobrania
992
Polubienia
111
Ocena
4,5
P
PrintablesOliver Thomsen

Prusa MINI PC4-M6 Bowden Fitting Adapter

Always liked those quick release bowden fittings, but unfortunately the regular sizes (M6/M10) don't fit on Prusa MINI. So I decided to make an adapter. UPDATE 24.07.2020: Stretched the hex-nut a bit, so that the transition between thread…

Pobrania
992
Polubienia
121
Ocena
4,81
P
Printablesdhoard

Ender 3 V3 SE - Z axis reverse Bowden mount

Ender 3 V3 SE - Z axis reverse Bowden mount used in combination with https://www.printables.com/model/602032-ender-3-v3-se-ender-3-se-reverse-bowden-adapter and a spool holder to move the spool from the top of the printer to the right…

Pobrania
977
Polubienia
153
Ocena
5
P
PrintablesNeumo

Bowden Panel Passthrough

This model is designed to mount on a 3mm panel and comes in three angles relative to the panel 0°, 30°, and 45°. The mounting pattern is an equilateral triangle with sides of 26mm. You will need to drill three 3mm (or 1/8") holes and one…

Pobrania
974
Polubienia
195
Ocena
5
P
Printables3DPR

Voron Bowden Top Pass Through

This is a bowden pass through for the bowedentube on Voron printers. I have a 350mm sized voron and It bugged me that the spool is so far in the back. putting a hole in the side panel to pass throug the bowden was no potion because this…

Pobrania
960
Polubienia
211
Ocena
5
P
PrintablesJohnM

Prusa i3 Mk3 reverse Bowden extruder PTFE connector

This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…

Pobrania
955
Polubienia
115
Ocena
5
P
PrintablesAlan

Bowden Guide/Support for K1 MAX

This an alternative version. Adapted from another contributor.

Pobrania
951
Polubienia
56
Ocena
5
P
PrintablesTek

Creality K1 / K1 Max / K1C beefed up chain + integrated bowden clip

A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…

Pobrania
918
Polubienia
115
Ocena
5
P
PrintablesThuWe

K1 / K1 Max Bowden Clip

Category: 3D Printer Accessories

Pobrania
905
Polubienia
77
Ocena
5
P
PrintablesThiago Fonseca

Bowden tube insert for creality filament dry box 2.0

An insert for the Creality filament dryer to securily attach a 4mm bowden/PTFE tube. It should be a perfect fit for the dry box hole and a tight fit for the bowden tube. If not, the fit can be tuned with a 4mm drill bit and glue The…

Pobrania
901
Polubienia
122
Ocena
4,89
P
PrintablesTheHamburglar

Low Profile PTFE Bowden Tube Connector Fitting

Print at lowest layer height you can.

Pobrania
898
Polubienia
107
Ocena
4,91
P
PrintablesDarrin

Sunlu S2 10mm Bowden Adapter/Wedge

Sunlu wedge/filament guide/bowden adapter for the S2 drier. Keeps filament at a natural unspooling angle for less resistance and in a better location than the factory hole. Threaded for 10mm fitting. Wedge allows humidity to escape.…

Pobrania
882
Polubienia
132
Ocena
4,86

Bowden PTFE Coupler Clip (3 thicknesses)

Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…

Pobrania
871
Polubienia
65
Ocena
4,67
P
PrintablesGoodHope

Bowden Y-splitter for Qidi Box (AMS) , PC4-M6

I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…

Pobrania
849
Polubienia
114
Ocena
4,85

4-way Bowden Connector

I created a handy 4-way Bowden splitter that's perfect for my MMU project. It works well with different kinds of printer setups too. This gadget simplifies handling several filaments at once, making your printing smoother. You can quickly…

Pobrania
844
Polubienia
461
Ocena
4,33
P
Printablesedgett

Sunlu S2 Bowden Adapter

Add a Bowden tube to your Sunlu FilaDryer S2 using this improvement wedge and a M10 Pneumatic Fitting. This remix of RENOxDECEPTION's "Sunlu FilaDryer S2 Improvement Wedge W/M10 Thread + PTFE Tube" simply adds a few fillets to soften the…

Pobrania
837
Polubienia
105
Ocena
5
P
PrintablesDennis Bauer

Bowden Guide with 360° Print-in-Place Joint

https://github.com/DeBau/VoronMods/blob/main/Top%20Bowden%20Guide/Pics/TopView.jpg BOM 2-3 x heatset inserts M3x5x4 2-3 x M3x8 - 16 SHCS for Bowden Coupler Version BSP 1/8 Bowden Coupler for Glue Version 3M VHB Tape Required parts Version…

Pobrania
811
Polubienia
185
Ocena
5
P
PrintablesLinus

Core One PTFE Bowden Tube Connector Mod

tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…

Pobrania
799
Polubienia
298
Ocena
4,76

Sovol SV06 / Plus Bowden Tube Mount

Simple bowden tube mount for M6 bowden coupler. Requiered Hardware: 2x M3*8 countersunk 1x M6 bowden coupler

Pobrania
797
Polubienia
134
Ocena
5
P
PrintablesDavid S

Dillon Powder Adjuster Knob

For a more convenient knob, insert a magnet into the slot. The magnet should be somewhere smaller than 0.315 in.

Pobrania
796
Polubienia
48
Ocena
4,4
P
PrintablesDominik Knoll

Snapmaker U1 Bowden Clip

German: #Beschreibung Der Bowden Clip für den Snapmaker U1. Ideal zum Ersetzen bei Defekt oder um die vorhanden Clips zu erhöhen. Druckeinstellungen Druckmaterial: PETG (für offenen Drucker) - (ASA für Geschlossen) Layerhöhe: 0,2mm…

Pobrania
790
Polubienia
167
Ocena
5
P
Printablesjphalip

ECAS04 Bowden/PTFE Tube Coupler

This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…

Pobrania
789
Polubienia
66
Ocena
5
P
PrintablesGulsifer

Rookery Bowden tool head

This is a tool head designed for an ender head with a volcano heat block. here is the BOM (1) 3010 fan (2) 3010 blowers or 4010 blowers (3) M3x6x5 heat inserts (2) M3x4x5 heat inserts for input shaper - Optional (2) M3x4x5 heat inserts…

Pobrania
787
Polubienia
98
Ocena
4,78
P
PrintablesSteve Eglon

AD5X/AD5M/AD5M Pro Bowden Clip and Improved Fan Retainer

The AD5X is a great machine but like any there are always little niggles which can be improved upon. The Bowden clip which retains the 4 in 1 filament feed tube is small and fiddly to remove. The model attached is longer and still fits…

Pobrania
767
Polubienia
86
Ocena
5
P
PrintablesZzoyozZ

Clean Bowden Y-Splitter

Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's. Screw the small part to the printer (see picture), remove existing screw first. Remove the coupler from the printer. Screw in…

Pobrania
767
Polubienia
92
Ocena
4,63
P
Printablesdefsdoor

Washing Powder Scoop

Simple but sturdy washing powder scoop. May have other uses.

Pobrania
757
Polubienia
51
Ocena
4,85
P
PrintablesMatS

K1 Max Drag Chain Bowden Tube Clip

This is a drop in replacement of original K1 MAX bowden tube clip. Print it on the side with a brim. No supports are needed. I printed it with 0.2mm layer height, 3 wall loops and 4 bottom and top layers and it works great.

Pobrania
750
Polubienia
56
Ocena
5
P
PrintablesRGabor

Ender 3 V3 SE Reverse bowden adapter no fitting mod

I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…

Pobrania
745
Polubienia
102
Ocena
4,9
P
Printablesasm2750

Creality Space Pi Bowden Coupler

v2.0: Updated to be more like the design I did for the Polydryer. The updated design includes a 3d printed nut for stronger attachment. I noticed after a while the 1.0 version in PLA would get loose when heating ABS and ASA. It's…

Pobrania
744
Polubienia
98
Ocena
5