2201 modeli
Simple iPhone and Apple Watch stand that holds both the MagSafe charger for any iPhone 12 and the standard Apple Watch charger. Both stands are tilted 15 Degrees backwards which allows routing the cable inside while still achieving a…
Wydruk około 8,53 €–10,42 € nettoWstępna wycena jednego wariantu
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based largely on Fanboy 's Gen 1 phone/watch stand . I recreated the basic base shape in Fusion360 and designed the top half to hold the official Apple Magsafe charger. I also referred to a couple of online designs for the screw-retention…
Wydruk około 11,99 €–14,66 € nettoWstępna wycena jednego wariantu
This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally. For very large phones, the movable holder can also be mounted upside down, so that even…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
edit: There is an improved version designed for PETG now. If you own the headset, you probably already know the original headband is very prone to cracking. There is already rudimentary replacement part out there but I wanted nice,…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
Adjustebel wall mount for IKEA Trådfri wireless motion sensor. Extra parts 3xM3 8mm countersink screws and 3xM3 nuts. Glue sensor holder to lid Print instructions Model is drawn to fit in two M3 nuts internal. On 0.15mm it will be on…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Sony Pulse 3D Wireless Headset holder Print on "it's back" with 10% gyroid/grid infill and grid support from build plate only. This headset module couples with the adapater biltema (or the vanilla adapter ) so You need to print this…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
A simple phone stand that should fit most mobile phones and integrates the wireless Belkin charger F7U054. Print instructions Printed in PETG, 0,2mm, supports & brim.
Wydruk około 7,09 €–8,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hold your wireless adapter cap on the end of the usb to avoid miss placing.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
2012 - 2016 Mercedes Cla Model and A Class w176 - c176
Wydruk około 5,83 €–7,12 € nettoWstępna wycena jednego wariantu
I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…
Wydruk około 2,03 €–2,49 € nettoWstępna wycena jednego wariantu
There are TWO versions of this one in the model section: Wired version, slide in and connect to a general usb c plug. I made this for a generic usb c plug, but they are different thickness so you might need to adjust the height of the USB…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
The dock May be too small for the big phones. Tested on nothing phone 1. Otherwise it is a relatively compact and simple dock for the Ikea wireless charger, not a lot of things to say… Prints as 1 file No supports needed Recommended layer…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
This is a remix of @Czo_275430's NORDMÄRKE base that supports phones with cover up to 13 mm.
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Nice tray for my IKEA Livboj and my Google Pixel 7a to always get perfect alignment. Made in OpenSCAD fully parametric.
Wydruk około 3,34 €–4,08 € nettoWstępna wycena jednego wariantu
Just making sure that Iphone 13 is charging every time… it was sliding and it took a while to find a spot that worked…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to be as small and light as possible Prints as 1 file No supports needed <30g of filament used <3 Hours of print Recommended layer height: 0.2 or less.
Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu
I did shorten the handle to fits in my Mk4, and modified the cylindre to be able to use the fuzzy skin instead of the original pattern because I personally prefer it.
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As part of my storing system, I have most of my video stuff in gridfinity boxes. This model allows to store (almost) the whole Rode Wireless Go system. It contains: the 2 microphoens / transmitters the receiver the 2 "dead cats" (furs)…
Wydruk około 7,86 €–9,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Držák pro přesné uchycení telefonu pro bezdrátové nabíjení Huawei.
Wydruk około 0,85 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I own two of Microsoft Wireless Mobile Mouse 4000, and the rubber coating on the scroll wheel has gradually worn and come off on both mice. I have designed a replacement part. I have printed it with TPU, and it fits well without need for…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
Wydruk około 4,03 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wireless hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
A case for the Pi Pico, Pico W, Pico 2, Pico 2 W. Supports soldered headers but does not support the official Pico 2 WH (see below for alternatives). Snaps together. Allows the BOOTSEL button to be pressed. Useful when the Pico needs to…
This holder is designed to make charging less cluttered and more organized. It’s made to perfectly fit your Apple wireless charger and cable, snapping right into place—no glue or tape needed! Includes built-in cable management on the…
Do you have an Arctis Nova Pro Wireless? Do you like a clean looking desk top? Do you not want to have to reach too far to adjust the volume or other settings on your Arctis Nova Pro Wireless? If your answers are Yes, then here is a…
Fits into the Model 3/Y center console wireless charging pads and holds AirPods Pro in exactly the right spot to charge wirelessly. Given the extreme environment in a vehicle, high-temperature filament such as PETG is very strongly…
UPDATES: April 7th: Added support for 24V 4020 fans on V2 design (should also work for V1 designs). If using 24V fans, trim the boost converter output to 24.0 instead of 12.0 April 7th : Added “w ireless test jig” to help with assembled…
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :) Works as an MMU print, or single color!
This is my version of Rode's Interview Go Handheld Adapter for their Wireless Go systems. Plug the Wireless Go receiver into my adapter and you have a handheld style microphone that looks great when supplying your own foam wind cover. I…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
Video tutorial on assembly: If you like this one there's a "donate" clicky thing on this page to help me keep doing this kind of stuff so I can give the files out on Prusaprinters for free. Even a buck helps. I really want to do…
Phone stand designed for Iphone 11 and Ikea LIVBOJ wireless charger. Print instructions Phone stand designed for Iphone 11 and Ikea LIVBOJ wireless charger. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…
I had an old Samsung Wireleless puck I wanted to start using to spare my USB-C port the stress of being used daily. There were two or three available but all of them had significant problems and didn't suffice in my needs. This model…
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
This product allows you to charge your AirPods Pro on the Tesla Model Y wireless charger without them falling out during the drive. Several designs are available. The original design was created by Nuno. I made some modifications to the…
Typeractive.xyz Wireless Corne Case This is a top plate/case that I designed to fit the Typeractive.xyz wireless Corne (https://typeractive.xyz/products/corne-partially-assembled-pcb). I really liked the look of curves on the Cornish Zen…
Finished my latest revision of my custom phone stand. Utilizing a print-in-place hinge, this stand is fully adjustable and supports wireless charging in both portrait and landscape orientation. Lock it in place with 3D printed screws and…
This is a remix of kingnai's amazing battery holder for the xbox360 controller. This has a removable sliding cover so, no glue is required. The batteries have to be connected at the bottom of the battery holder, you can use some tin foil…
This is a minimal case for the Heltec Wireless Tracker with a lipo battery. The user and reset buttons are supported, and the USB-C charging port is easily accessible. Each corner has support for a wriststrap, rubber band, or elastic to…
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
Update [23.7.2025] added versions for 25mm and 20mm long screws. *Added at the request of @SamC_3382651, I haven't printed them personally, but they should work without problems. Hello. I have a Logitech G Pro Wireless…
Rate and share your makes! Turn your Ikea LIVBOJ wireless charger puck into a fancy oversized stand. Weights aren't needed, but I went with 50% infill for the first 10-15mm and 10% for the rest. To set the puck and cable in: Slide the…
A under desk mount for Steel Series. Should just slide in from the front.
The parts can replace the hinges of the Skullcandy Crusher wireless headset, which gets broken very easily. The parts are designed to be printed without any support on any FDM printers.
I designed this to replace the ashtray in my 2008 e92, but this should work for any BMW e9X model. This design will hold a Samsung Galaxy S21 with a case measuring 80mm wide. I printed in black ASA at .20mm with Supports. It is best to…
Hey people, Made a neat little stand for charging and displaying my iPhone 12 Max and Apple watch, thought I'd share. It nicely fits the 12 Max as said with enough room in the cradle if you have case on too. I guess it will fit the 13 max…
Let me introduce you to my custom-designed enclosure for the Heltec Wireless Paper. This enclosure is versatile, accommodating larger batteries, and features a simple button design on its side for easy operation. Hardware: - Heltec…
Insert wire or metal strip in slot at bottom end to make electrical contacts for batteries and insert batteries observing polarity markings on holder. 3 volts should be present on both batteries when connected.
Remix von https://www.thingiverse.com/thing:4599572 Schriftzug auf BMW abgeändert. Erweiterung bzw. Austauschteil für den Original Schieber am Wireless Charger. Passend auch für F3x, F8x und I01 (I3) mit Wireless Charging Ablage. Die…
Case for Heltec Wireless Paper, there are so few cases for it, so I decided to make one and share it here. My goal was to make it as slim as possible. Final size of the case: 46mm x 87mm x 18mm and only around 60g with the board and the…
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black or White PLA MAX Light Gray Variants: Rev 0 = Genesis Dongle Dock Rev 1 = Genesis and USB Dongle Docks Rev 2 = USB Dongle Dock Rev 3 = Double M30…
Arctis Nova Pro Wireless controller under desk and side mount. Attached with Screw holes, or an .STL for no screw holes if you wish to attach with double sided tape as I have done. I made 7 different variations of these mounts before I…
Microfon holder remixed for the “Rode Wireless Go (II)” : https://amzn.to/3HWJ8ot (Partnerlink) Original description: "This is my version of Rode's Interview Go Handheld Adapter for their Wireless Go systems. Plug the Wireless Go receiver…
This model snaps in to the color cap area on the bottom of a Shure BLX2 mic. Allows you to print your own color caps in whatever color you want to identify your mics easily. Under the battery cover at the bottom of the mic is a small…
My first completely original model! This is an Ikea Skadis mount for the Nintendo Switch Online Super Nintendo (SNES) or Super Famicom (SFC) bluetooth wireless controller. It will also work with the 8bitdo SN30 or SF30 bluetooth/2.4ghz…
I wanted to bet able to take my Corne from one location to the next without it getting damaged in the process. This is only designed for use with the V2 Corne using the Nice!Nano controller with a Nice!View display (as pictured) and the…
Heltec Wireless Stick (Lite) v3 case Parts needed: Heltec Wireless Stick v3, either in the Lite or "normal" version including the antenna cable. 4 ruthex style M3 inserts, d=4.6mm, h=5.7mm 4 M3x12 screws, all kinds with flat heads should…
V5 fits this model of Magsafe charger. AliExpress LINK Cheers,
A nice looking Wireless Charger Stand for your mobile phone. The charger that fits is form Ikea and is called “NORDMÄRKE”. The charger is avaliable in three colors. Pints in one peice with a small amount of support material. I made the…
Everyone who owns this wireless charger from Samsung certainly knows this problem. You finally want to sleep in the evening and put the phone on this charger without looking... And the next morning you realize with fright that the phone…
This model will work for both left and right sides of the headset. You have to replace both the front and the back of the hinge for each side that you want to replace as it will not mate with the existing shell pieces. Also, for the back…
Designed to hold 4 wireless microphones in each holder. Modeled around the Phenyx Pro Wireless Microphone. Print top down and no supports are needed.
I built this so that my Sofle would be a little less naked than you get with the usual acrylic plates. This model is only for the Choc 2.1 variant with nice nano controllers and nice view displays. In addition to the keyboard itself…
Reduce clutter on your nightstand with this beautiful yet functional wireless charging stand for your wireless-charging capable iPhone and Apple Watch. Requires: Wireless-charging capable iPhone (iPhone 8 or newer, iPhone Xs Max pictured)…
As mentioned, this is a remix of https://www.thingiverse.com/thing:5773368. The original had really sharp edges so I rounded off the corners to make it pleasant and safer to hold. I am using the spacer adapter so I know it works. The…
As both of the clamps on my headset were broken, I designed some new. The shape is hard to measure so it's not 100% but good fit. I ran though a lot of iterations to get it like that and ended up with these parameters: PETG(-CF) 0.16…
When you find yourself in a tough situation (without forks to mix with) this should do the trick! Just plan ahead a little and print one of these before breakfast and you'll feel more accomplished while eating that omelet! Material for…
Here are two versions of a basic case for the Wireless Stick Lite V3 with USB-C port. Both snap together. Buttons are untested, but should work. Might need to be sanded down. They work for either case style. Versions: Basic case: Holes…
It's possible to print it with tree support which touches just a boilerplate.
Because Samsung killed EP-N5200 and there's only knock off remaining on the market, EP-P2400 is your only option. But Samsung decieded to make it flat and a alignment nightmare, so here's my fix for that. The pad's height is designed for…
Description *There are two versions : one with the same design on the back, but which does not work with apple watch wireless charger, and another one with a thin back which works for wireless charging . ( tested it personally with apple…
But for ball joint
“inspired” by google's official charging base, which can only be purchased as a kit with an additional Pixelsnap wireless charging puck for $70 usd before tax and shipping. The puck slightly protrudes out of the front to make sure it can…
Step into the future with the Pointer9000! To assemble this marvel of wireless precision and retro design you need bambulab's Wireless Mouse Components Kit . Help me create more FREE models! If you like the stuff I create, consider…
A simple vent clip-on that directs air perfectly onto the front of your phone, keeping it cool whilst charging (like in the BYD Shark). Around 19 grams of filament. I'd recommend ASA or a higher temp filament as car interior temperatures…
UPDATED Added .step and .f3d files, and added tolerance to the nut for better fit. Easily mount and charge your phone while driving with this simple magsafe mount! I'm a huge fan of the VanMass vent-mounting system and think it provides a…
A Catch-All/EDC shelf with a spot for all of your daily essentials. Keep all your daily carry items in one place, and ready to go. The shelf features a phone divot specifically to fit Max and Plus iPhone models. Mount your shelf directly…
This is a direct STL conversion of the 3D printed case and plate for Corne choc low-profile wireless models found on typeractive.xyz . You will need M2 x 6mm screws and nuts as well as the bumper feet. I used the following from Amazon:…
Released on 16 Feb 2024 by Blueskies . Improved version on 22 June 2024 These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family…
The lid is a slip fit that should stay in place pretty well. If it is too tight or too loose from your printer you can scale the lid up or down a few percent in X and Y then try again.
This print was created using the Rugged Box (Parametric) design by @Whity (thank you!). Designed for the Logitech G502 Lightspeed Wireless Mouse and to be fitted with the molded cardboard insert from the original box's packaging (see…
I designed this neat stand in which you can mount the IKEA Rallen wireless charger. Standard size: https://www.thingiverse.com/thing:3068268 NEW - XL Version: https://www.thingiverse.com/thing:3141797 Flat version:…
This is a battery holder for the Xbox 360 wireless controller. Inside before gluing the parts together, use a bit of wire or tin foil to connect the batteries together, as seen in the picture. Category: Video Games
A display stand for the Retro-Bit brand Sega Saturn wireless gamepad controllers. Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black, Red, Blue PLA MAX Light Gray ERYONE Sparkle Glitter Silver…
I uploaded wesk's 3d scans here so its easer to find with a stl finder website these are untested for printing and in wesk words “3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs'…
Phone stand designed to wirelessly charge your phone with easy. Compatible with Anker wireless charger PowerWave ( https://amzn.eu/d/bYWMQlP ) and most devices. Additional option to use 8mm adhesive rubber feet with stand (…
This is a case for the Heltec Wireless Tracker with buzzer support Required hardware: 4x M3x15 mm socket head cap screws 4x M3 brass threaded nuts Battery: Li-pol 3000mAh ( 65x36x10) V2: modified middle part modified bottom part with hole…
I need to travel with my headset sometimes and decided to create a case for it! Can hold both the headset and the DAC along with any cables you may need as well. DAC fits in the middle of the headset band (see image) inside the case. Fits…
This is a basic holder to keep your phone in place above the wireless charger in the Rivian R1T. I originally made files for a zFold3 and an iPhone 13 Pro (I believe that the 12 Pro is the same size) and are sized based on no case being…
A replacement for the hinge of Skullcandy Crusher Wireless headphones. THIS IS NOT A MOVING HINGE!!! This is a rigid replacement that will be easier to print.
A display stand for the Retro-Bit brand Sega Genesis / Mega Drive wireless gamepad controllers. Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black, Red, Blue PLA MAX Light Gray ERYONE Sparkle…
![Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]](https://media.printables.com/media/prints/708849/images/5560717_ae14a831-061b-4090-9d33-a60d35514964_04cd4bb4-c195-4a5b-b810-5629f3b2daa1/perspective.png)
