Wyniki wyszukiwania: x10

Sortowanie

1551 modeli

P
PrintablesSilverBullet126

Axial Ryft RBX10 - Full Clamshell Roof

By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…

Wydruk około 7,57 €–9,25 € nettoWstępna wycena jednego wariantu

Pobrania
281
Polubienia
7
Ocena
5
P
PrintablesFreycraft

Raspberry Pi 4b case with lid for 40mm PWM Fan (such as Noctua NF-A4x10 5V PWM)

Additional parts needed: Rasberry Pi 4b 40 mm PWM 4V Fan (such as Noctua NF-A4x10 5V PWM) 4x M4 countersunk screw (Normally supplied with the fan) Optional: 4x M3 nut and 4x M3x6 screw (To screw Raspberry pi securely into the case) Print…

Wydruk około 3,63 €–4,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
272
Polubienia
38
Ocena
0
P
Printableskaje

Lathe Spindle Spider for 7X10 MiniLathe

This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 7x10/12/14 inch lathe models. Assembly There are 8 holes that need to be tapped M6x1.0 (the equivalent length ¼"X20 screws should work…

Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
160
Polubienia
20
Ocena
0
P
PrintablesAndo Roots

XLR cable comb 2x10

Holds 2x10 cables, hole diameter 7.4mm

Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu

Pobrania
148
Polubienia
22
Ocena
0
P
PrintablesmC_rOMeo

Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board

I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…

Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
100
Polubienia
3
Ocena
0
P
Printablesgskollnau

Bonsai pot 09 spherical (mame) 108x108x77mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Wydruk około 4,61 €–5,64 € nettoWstępna wycena jednego wariantu

Pobrania
86
Polubienia
16
Ocena
0
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Stampede 4x4

A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…

Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu

Pobrania
73
Polubienia
4
Ocena
5
P
Printablesr&vm

Pentominos: cas 6x10

Un pentomino est une forme géométrique composée de cinq carrés de même taille, connectés les uns aux autres par leurs côtés. Chacun des 12 pentominos possibles a une forme distincte, bien que certaines puissent être des rotations ou des…

Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu

Pobrania
66
Polubienia
16
Ocena
5
P
PrintablesDelta

Wera Click-Torque A5 tool holder - perforated panel (10x10mm)

It has a bit of tolerance and slightly jiggles around, but I prefer that to be able to easier get /store the tool. Printed in PETG, 0.2 layers, 20% infill, with supports and with MMU3, although the text doesn't look so nice (need more…

Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
58
Polubienia
6
Ocena
0
P
PrintablesSpacehuhn

Stackable Customisable USB Holder Organiser 5x10

I made this to organize my USB Novas. You can edit the OpenSCAD file to change the size(s) and layout. I exported a USB-A and USB-C version. But keep in mind that I made these specifically for my own products. These are not…

Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu

Pobrania
54
Polubienia
9
Ocena
0
P
Printables3dprints4life

Beautiful simple and stable box 20x10x8 cm

A simple but beautiful box with dimensions 20 cm x 10 cm x 8 cm (length x width x height). The wall thickness is 2 mm. For that reason you will need some filament for printing. :) Due to round corners inside the box, the box is easy to…

Wydruk około 7,88 €–9,63 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
2
Ocena
5
P
PrintablesDelta

Wera Kraftform Kompakt VDE Tool Holder 817 - 16 pieces - perforated panel (10x10mm)

Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…

Wydruk około 4,54 €–5,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
40
Polubienia
8
Ocena
5
P
PrintablesBradW

Axial SCX10III Early Bronco Seat Back

I made these seat backs for when you flip the seat to fit a 6" driver. Flipping the seat makes the driver fit better but leaves the back open.

Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesBrent Yardley

Lack v1 40x10mm Enclosure Fans

I was looking at the cooling fan design from @dougmeek. However, I have a lack v1 enclosure. So I took inspiration from his design and add/updated it to support a v1 lack enclosure, where the full 50mm width of the top table still exists.…

Wydruk około 5,49 €–6,71 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
7
Ocena
0
P
PrintablesDelta

Wera Kraftform Kompakt 62, 33 pieces holder - perforated panel (10x10mm)

Tool holder for Wera Kraftform Kompakt 62 with 33 pieces. https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_without_ratchet_functionality_kraftform_kompakt_60_62_kk_62.html.html (No. 05059297001) This version is for…

Wydruk około 4,64 €–5,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesMichael

Exhaust tip fittment check 2x89mm / 2x101mm

I made exhaust tips to print in size 2x89mm and 2x101mm With this pieces I (and you) can check the fitment of these sizes in your rear bumper/diffuser when your are intended to buy new exhaust tips for your car.

Wydruk około 5,89 €–7,20 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesDrebinWorks

Silica gel box - 100x100x48,2

I created this model to add additional drying capacity to my silica gel based dry box. Printed on a Prusa mini with Overture Rock White PLA.

Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesErikSi

142 Vorsicht: Spielende Zahlen! Suguru 15x10n6

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Wydruk około 13,67 €–16,70 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesBoogie

First layer test 100x100 mm square

First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square

Pobrania
13 201
Polubienia
207
Ocena
4,89
P
Printableskunaa

M3 hex screw and nut (M3x10, M3x15, M3x20, M3x25, M3x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Pobrania
9777
Polubienia
386
Ocena
4,45
P
Printableskunaa

M4 hex screw and nut (M4x10, M4x15, M4x20, M4x25, M4x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Pobrania
4446
Polubienia
142
Ocena
4,67
P
PrintablesGabriele

Rectangle 100x50x10

Test rectangle 100x50x10 mm

Pobrania
3687
Polubienia
39
Ocena
5
P
Printableskunaa

M5 hex screw and nut (M5x10, M5x15, M5x20, M5x25)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Pobrania
3266
Polubienia
112
Ocena
4
P

10-inch Keystone Patchpanel x10 ports

A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…

Pobrania
2760
Polubienia
213
Ocena
5
P
Printablessts210

100x70x100 Container with HSW Adapter

Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…

Pobrania
2599
Polubienia
525
Ocena
4,96
P
Printableskunaa

M6 hex screw and nut (M6x10, M6x15, M6x20, M6x25, M6x30)

nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Pobrania
2245
Polubienia
106
Ocena
5
P
PrintablesSpretrep

TP-Link Deco X10, X20, X50, X55, & X60 wall mount

Wall mount for a TP-Link Deco X50 node/4g-router and 5G router. The router model is for a X50 5G router which is oval and tapered upwards, not round. It isn't as snug as the node bracket, but when hooked up to the cables it wont move. If…

Pobrania
2119
Polubienia
131
Ocena
4,67
P
PrintablesPigeonGiraffe

100x100x100 Calibration

I needed a new calibration print to dial in my stepper motor to achieve great dimensional accuracy at a larger scale than just a simple 20x20x20 cube. Was looking and found this from Collect3D on thingiverse. Remixed it to have larger…

Pobrania
2007
Polubienia
106
Ocena
5
P
Printableskaje

Lathe Change Gears 7x10, 7x12, minilathe

Update Oct. 14, 2022 : Missing files for 60 tooth gear added. These lathe change gears should fit most 7x10, 7x12, or 7x14 mini-lathes. These prints include all of the standard gears, plus some additional gears to make additional thread…

Pobrania
1881
Polubienia
128
Ocena
5
P
PrintablesDavidB.

Tp-Link Deco Wall Stand for x10 x20 x50 x55 X60

Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.

Pobrania
1840
Polubienia
97
Ocena
5
P
PrintablesJetSteam

Raspberry Pi5 + Geekworm X1001 NVMe SSD Case

This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch (no reverse engineering). The case…

Pobrania
1818
Polubienia
154
Ocena
4,77
P
Printablesdjedje_zr7

(x10) Drawers handles Classic Collection

Usefull things Set part 5 : Drawers handles 150mm holes axes. I don't have a 3D printer so if I could win a Prusa i3 MK3S at the "pratical contest" it would be fantastic. Rate and ask me for 3df files Please vote for me !!! Dje See also…

Pobrania
1639
Polubienia
552
Ocena
5
P
PrintablesCarter

Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether

Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…

Pobrania
1585
Polubienia
134
Ocena
4,92
P
PrintablesAnHe

Creality K2 Plus hepa and carbon filter box ( added VE2, VE2_83x83, VE2_100x108 )

Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…

Pobrania
1584
Polubienia
244
Ocena
5
P
PrintablesMorris Lazootin

VESA 100x100 Low Profile French Cleat Wall Mount

Are you feeling overwhelmed by your monitor taking up too much space on your desk? It's time to take a stand and reclaim your workspace with this French cleat, low profile monitor wall mount. This mount is designed to be both strong and…

Pobrania
1581
Polubienia
247
Ocena
5
P
Printablessts210

70x70x100 Container with HSW Adapter

Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…

Pobrania
1527
Polubienia
378
Ocena
4,9
P
PrintablesCarter

Raspberry Pi 3B+ Case for Noctua 40x10

Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…

Pobrania
1491
Polubienia
176
Ocena
4,94
P
PrintablesCode2

Medieval Stone Wall 28mm Scale - 10x10cm

This is a simple Stone Wall in 28mm scale that you can print without supports. Dimensions are 10x10x1 cm If you enjoy my content, please consider supporting what I do: Find more STLs on: Thank you, Code2. :)

Pobrania
1451
Polubienia
152
Ocena
5
P
PrintablesPyroguy096

M3X10 Socket Head Screw

Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: outer_diameter = 14 thread_step = .5…

Pobrania
1352
Polubienia
35
Ocena
0

Lift Table 130x100

There are no details here except those that you can print yourself. Supports should only be set when printing Base_gr and Base_top, the overhang angle of the support is 82 degrees, so that the support is not printed in the holes,…

Pobrania
1335
Polubienia
357
Ocena
4,71
P
Printablesdaver18qc

1/10 Scale Bumper Jack SCX10

* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…

Pobrania
1320
Polubienia
315
Ocena
4,89
P
Printables43D PRINT

Box 20x15x10 cm (no support no screw)

Box - outer max dimension 204x170x102mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…

Pobrania
1226
Polubienia
320
Ocena
5
P
PrintablesUhrensohn

IKEA Skadis Vesa Mount (100x100)

A simple monitor holder for Ikea Skadis. Suitable for Vesa 100x100. Separate the model into two parts in the slicer and turn the two parts to the side of the hooks. so no support structure is necessary. I recommend at least PETG! Eine…

Pobrania
1163
Polubienia
137
Ocena
4,8
P
PrintablesSaveYourBacon

Geekworm X1001 Raspberry Pi 5 Case

All the credit to the original designer (and for providing step files). I wanted a VESA mount for the back of my monitor and I was able to build off of Frogree 's design that also supports the Geekworm X1001 Pcie M.2 NVMe adaptor. Enjoy!…

Pobrania
1065
Polubienia
76
Ocena
5
P
PrintablesReDevil75
Pobrania
1054
Polubienia
7
Ocena
5
P
Printables43D PRINT

Box 10x10x5cm (no support no screw)

Popis Box with handle - outer max dimension 108x125x54mm - inner max dimension 100x100x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°)…

Pobrania
1043
Polubienia
279
Ocena
4,75
P
PrintablesG-workz3D

M5 X10 Bolt - Screw

M5x10 Bolt or screw with normal thread

Pobrania
1038
Polubienia
51
Ocena
4,75
P
Printablesbennie

VESA 75x75 or 100x100 low profile wall mount

Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…

Pobrania
1011
Polubienia
104
Ocena
5
P
PrintablesSteveK318

100x100x.2 1st layer check

Just a 100mm x 100mm x .2mm for 1st layer check

Pobrania
1010
Polubienia
15
Ocena
0
P
Printablesreemo3dp

Drilling Depth Stop using DIN912 M3x10

Print Settings Layer Height: 0.2 Flat Top vs. Angled Top The flat top version has nicer lettering and is more neat, but one might prefer an angled top to avoid damaging wallpaper.

Pobrania
968
Polubienia
296
Ocena
4,94
P
PrintablesMajor_RedStar

10x10 Lego Plate

10x10 Lego Plate

Pobrania
934
Polubienia
37
Ocena
4,5
P

Playstation 2 Quiet Fan Mod - compatible with fans from 50x10mm to 60x25mm (Noctua)

Edit from April 24th 2023 Per request, I've added holes which “ should” work with SCPH-3000x I don't have any other model on hands than my 39000 so do it at your own risk. I'm keeping the old ones working on 39000 for now.…

Pobrania
880
Polubienia
88
Ocena
5
P
Printablespolymech3D

Armadillo Off-Road Truck 1/10 body for SCX10 III

Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…

Pobrania
849
Polubienia
246
Ocena
5
P
PrintablesHans64

Thumb grip for Fujifilm X100 series

I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.

Pobrania
847
Polubienia
64
Ocena
4,5
P
PrintablesIacopani_Motors

Honeycomb Ventilation Grille (150x100, 200x60)

Honeycomb Grilles These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in…

Pobrania
795
Polubienia
83
Ocena
4,86
P
PrintablesZemistr

IQOS TEREA/HEETS 2x10 clip case

This upgraded version of the case keeps your bullets safe and covered. Fits better in your pocket thanks to its more oval shape. The clip that holds the lid in place is stronger. Tolerances in the model are increased.

Pobrania
762
Polubienia
60
Ocena
4,8
P
PrintablesFliesWithWind

Raspberry Pi 5 case for Geekworm X1001 NVMe Hat

Higher case to fit Geekworm X1001 NVMe Hat I guess it can fit other hats too given they're similar in hight to the NVMe hat.

Pobrania
753
Polubienia
49
Ocena
5
P
Printablesxboxsniper22

SCX10 Pro Frame

It's very close to the original and can be used as a template to create other parts.

Pobrania
750
Polubienia
62
Ocena
0
P
PrintablesBmcguire

2024 M4 Mac Mini Vesa Mount 100x100mm

This mount was designed based on the model by @DaveWoodX . If the actual computer's dimensions differ upon arrival, I will update the design accordingly. Update: Added v1.5 to add strength to the fingers that hold the mini into the mount.…

Pobrania
727
Polubienia
50
Ocena
5
P
Printablesniewesoly

Arzopa Z1FC VESA 100x100 Mount Adapter

Transform your ultra-portable Arzopa Z1FC 16.1" 144Hz gaming monitor into a permanent workstation setup! This custom 3D-printed adapter adds standard VESA 100x100mm compatibility , letting you mount it on walls, arms, or stands for…

Pobrania
727
Polubienia
57
Ocena
0
P
Printablesrorys3D

Tiltable VESA mount - 100x100

A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…

Pobrania
712
Polubienia
147
Ocena
5
P
Printablesdwiedmer

Air condition dual hose modification DeLonghi PAC EX100 silent

These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…

Pobrania
712
Polubienia
41
Ocena
5
P
PrintablesDiAleksi

Candle mold 40x100 with a string lock

This is a candle mold container for 40mm diameter and max 100mm tall candle. Lock the mold container with a ziplock Put the candle string through the bottom lid and tape it to lid's hollow Attach the bottom lid to the bottom of the mold…

Pobrania
706
Polubienia
141
Ocena
4,25
P
PrintablesRobert Posey

Scx10 chassis

Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…

Pobrania
683
Polubienia
62
Ocena
0
P
Printablesder_kellermann

100x100mm Vesamount for Monitors

I designed this simple monitor mount to use for a 24 inch 100x100mm compatible monitor. Material needed: This mount needs 27-28mm wooden roundstock found in hardware stores. Cut to length to determine the height of the monitor. Keep in…

Pobrania
636
Polubienia
100
Ocena
5
P
PrintablesZemistr

IQOS TEREA/HEETS 2x10 clip case 2019

After using "IQOS TEREA/HEETS 1x10 clip case 2019" we knew 10 bullets it's not enough. So here is a 2x10 catalog. Perimeters: 5

Pobrania
630
Polubienia
55
Ocena
5
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Pobrania
586
Polubienia
55
Ocena
0
P
Printableshandro

LSI 9300-8i Noctua NF-A4x10 Fan Shroud

Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…

Pobrania
571
Polubienia
42
Ocena
5
P
PrintablesBjörn

Yet Another Fujifilm X100v Thumbgrip

I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…

Pobrania
561
Polubienia
73
Ocena
4,89
P
PrintablesJpmurphy5

Customized Chain Mail 12x100x100

Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…

Pobrania
541
Polubienia
23
Ocena
5
P
Printableshandro

LSI 9400-16i Noctua NF-A4x10 Fan Shroud

Fan shroud to mount an Noctua NF-A4x10 to an LSI 9400-16i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9400-16i, but this…

Pobrania
522
Polubienia
36
Ocena
5
P
Printablesjackra1n

Raspberry Pi 5 Geekworm X1002 case

I'm not a 3D Model designer but I really want a case for my Pi 5 which also uses Geekworm X1002 HAT with an NVME SSD. So I remixed the case model by @pyrho as I really like it and made it fit the Pi 5 with the bottom NVME HAT. I also…

Pobrania
520
Polubienia
33
Ocena
5
P
PrintablesMario Alvarez

HSW Large honeycomb basket 100x100x63mm

honeycomb basket for heavy items

Pobrania
519
Polubienia
93
Ocena
4,67
P
PrintablesBasementLAB

SDD - HDD 2.5 Storage Tray x5 / x9 / x10 slots - Basetta per HDD-SDD a 5/9/10 posizioni

SDD - HDD 2.5 Storage Tray x5 / x9 / x10 slots - Basetta per HDD-SDD a 5/9/10 posizioni 75x107mm x 5 Slots 93x107mm x 9 Slots 87x113mm x 10 Slots Easy to print, optimized filament usage Update 22/01/2025: added HDD_SSD Storage Tray S2.stl…

Pobrania
516
Polubienia
48
Ocena
5
P
PrintablesKagarov

Concrete modular fence of the USSR PO-2 m:1x100

The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…

Pobrania
515
Polubienia
93
Ocena
5

Yet Another Smart Vent 4x10

For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent

Pobrania
508
Polubienia
58
Ocena
5
P
PrintablesSamaraMo

Mini Picture Frame with Stand (8x10 aspect)

Miniature picture frame (~35 x ~40mm outer dimension) with an integrated stand that works for both portrait and landscape. Area inside the frame fits an 8x10-ratio picture. Picture is held in place by a small ledge. Prints fine without…

Pobrania
486
Polubienia
32
Ocena
0
P
PrintablesBasementLAB

Ventilation Grille - Duct Cover 105x105mm / 105x210mm / 210x210mm / 210x105mm / Ø105mm - Griglia ventilazione a bocca di lupo

Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…

Pobrania
472
Polubienia
92
Ocena
5
P
Printablesjkfamily

N Scale W24x104 Beam

N-Scale W24x104 (24" deep x 104lbs/ft) steel wide flange beam. Actual print size is 3.8mmH x 2.0mmW x 96mm, which scales out to 24"H x 12"W x 50'L. Print instructions The thin walls were designed for a 0.25mm nozzle and 0.10mm layer…

Pobrania
470
Polubienia
65
Ocena
0
P
Printablesahead_RC

SCX10 iii Gladiator Flatbed

Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…

Pobrania
470
Polubienia
96
Ocena
5
P
PrintablesUser87

IP Waterproof Box 150x100x80mm

We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…

Pobrania
469
Polubienia
47
Ocena
5
P
Printablesawhildy

Lego Duplo build plate (10x10)

A very simple remix from https://www.printables.com/model/105237-lego-duplo-build-plate-customizable that just adds a 10x10 build plate (which is the largest that can fit on my Prusa Mini). This is easy to recreate yourself – but figured…

Pobrania
468
Polubienia
45
Ocena
5
P
Printables3ddk

Simple Box (big) 10x10x15 cm

Simple Box with 2 cover variants, one that's useable as voting box and one without slot. This is the “big” size with the following dimensions: 10 cm height 10 cm width 15 cm length I printed mine using Prusament PETG Prusa Galaxy Black…

Pobrania
467
Polubienia
19
Ocena
0
P
PrintablesTycho Design

M10 Screw Collection M10x10-M10x90 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M10x 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…

Pobrania
456
Polubienia
36
Ocena
5
P
PrintablesRevellio

Custom Crawler Chassis based on SCX10 Carbon Rails

General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…

Pobrania
455
Polubienia
73
Ocena
0

vite m5x10 e dado m5 standard iso

vite m5x10 con dado m5 con standard iso, consiglio di stampare usando un pla+, senza inserire i supporti, e con un riempimento non inferiore al 40%

Pobrania
450
Polubienia
19
Ocena
0
P
Printables3D Galaxy

BOLT AND NUT M3x10mm

Bolt and nut M3 x 10mm Lenght: 10mm Diameter: 3mm

Pobrania
439
Polubienia
20
Ocena
0
P
PrintablesDP

8x10 Mobius Photo Picture Frame For Big Printers

Made this for larger prints and added a few holes to hook into a small nail or photo hanger. Should fit an 8 by 10" photo perfectly if your printer prints to size accurately. You can measure after the first layer goes down if you're…

Pobrania
430
Polubienia
38
Ocena
5
P
Printablesddded

HSW 10x10 cells wall compatible with 210x250 mm print size printers

UPDATE 04.08.2023: Added print file for PLA, 0.3 mm layer. UPDATE 31.07.2023: Added print file for PETG, 0.3 mm layer. Print time decreased to about 5 hours. UPDATE 25.07.2023: New model printed and seems all is fine, check photos. On…

Pobrania
425
Polubienia
45
Ocena
5
P
PrintablesDrevil

Ender 3 S1 Fan Mount & Duct (Stock 40x10 Radial Blower Fan)

Ender 3 S1/Pro/Plus Sprite Fan Duct A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers . This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the…

Pobrania
422
Polubienia
66
Ocena
5
P
PrintablesVeluxor

10x10x10cm basket

"hexabin hook.stl" make the bin hangable. It is tight, a bit of filing might be required. Print hooks in 0.1mm layers.

Pobrania
421
Polubienia
84
Ocena
5
P
Printablesderzoelli

XYZ Calibration Cube 10x10x10mm

XYZ Calibration Cube 10x10x10mm

Pobrania
418
Polubienia
24
Ocena
4,75
P
PrintablesPavel Kraus

Desktop organizer 220x160x100mm

Jednoduchý organizér pro cokoliv. Tento byl dělaný pro makeup, ale použít se dá jakkoliv. Ať slouží… v2 - Pro lepší tisk jsem nahrál části odděleně. A simple organizer for anything. This one was made for makeup, but can be used in any…

Pobrania
415
Polubienia
51
Ocena
5
P
PrintablesRevellio

AXIAL SCX10 I & II - Chassis Parts / Update 22.10.2026 - New Body Mounts

Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…

Pobrania
411
Polubienia
53
Ocena
0
P
PrintablesKisolov

Sound moderator 40x100+

Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…

Pobrania
411
Polubienia
46
Ocena
0
P
Printablesmkingery

Wall-mounted Switch Game Case Holder x10

This prints on its back without any supports and affixes to the wall with 2 screws. it looks great in white and i'm pretty happy with it so far!

Pobrania
404
Polubienia
72
Ocena
0
P
PrintablesCrooksUSA

Case for Raspberry Pi5 + Geekworm X1001 HAT + NVMe SSD

From the original creator: This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch. The case…

Pobrania
400
Polubienia
38
Ocena
4,5

Noctua NF-A4x10 Fan

Initially indended to print as a keychain but can also be used as a place holder for a 40mm fan in cad proojects.

Pobrania
397
Polubienia
17
Ocena
5

2,5'' HDD/SSD holder (x10 and x20)

Organize your loose drives with this practical holder! Available in the x10 and x20 version.

Pobrania
395
Polubienia
64
Ocena
0