446 modeli
Motivation The xTool RA2 rotary is a great accessory, but it can be challenging to square the workpiece up to the RA2 rotation axis. Solution Design and print a fence to achieve the following objectives: Allow workpiece to be held square…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Holder for honeycomb magnet pins xtool
Wydruk około 1,32 €–1,62 € nettoWstępna wycena jednego wariantu
My laser cutter is up on risers for rotary engraving so I didn't feel like laser cutting the ruler, here's a 3D printable version of it.
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mounting system to hold the XTool D1 laser in place while printing. It has one large hole in the center for the leg to fit into, then 4 holes for screws to mount to the surface. For best results, use one on each of the 4 feet.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
This is a alignment jig of 30 mm standard stainless steel pedant for Xtool F1. Fits 9 pedant at single run! If you found this model helpful, please like and share!
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Um die empfindliche Verbindung von Kabel und Stecker am Schrittmotor zu schützen, habe ich diesen Winkel entwickelt, Er besteht aus drei Teilen, gedruckt in PETG 100% Infill, Teile werden mit Sekundekleber verbunden. *******************…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple low profile laser bed hold-down pin for small 6mm holes on xTool honeycomb laser bed. Thanks to the top fins being just 2mm high, there should be no interference with the laser head. Print in white colored filament to minimize…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is a simple riser designed for the Xtool M1 it allows you to rise 50mm or 100mm or even beyond that as it is designed to extend itself there is a tolerance of 0.4mm to make sure it can fit the extension please use at own risk it can…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A plate to hold anodized aluminium keyrings, which are formed like a bone for the xTool F1 and xTool F1 Lite. It can hold up to 5 keyrings. Fold them with the connecting ring at the top.
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Auf der Suche nach einem Filterhalter und einem Griff für den 40W Laserkopf, bin ich zwar mehrfach fündig geworden, nichts davon gefiel mir so richtig, daher konstruierte ich eine Kombination aus beidem. Es gibt ein Oberteil, in das ich…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple port adapter that you can affix to whatever you are using in your window and attach the hose to that was provided by xTool.
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Motivation I recently purchased a P2 Laser Cutter and Riser. One of the first cuts I needed to make was on a long piece of ¼” acrylic to be used as a window insert to which I would attach the exhaust duct from my inline fan. I currently…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
I took the xtool honeycomb riser by cbabbman and increased the thickness and size so that it would have a better hold on the honeycomb panel and also slightly increased the gap between the honeycomb and the stainless plate and increased…
Wydruk około 8,42 €–10,29 € nettoWstępna wycena jednego wariantu
I needed a vent adapter for the hose coming from P2s/Ap2 to the 4" vent that goes outside. I couldn't find anything so I made this. It works pretty well for my application. It fits pretty snug but I did have to use tape to create a more…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
print four put under laser cutter (if you're keeping yours ontop of your prusa enclosure like we are) job done
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
For engraving up to 11 pens or ballpoint pens simultaneously with the xTool F1. A placement map for xTool Creative Space is also available. Update: The placement map file has been updated for xTool Creative Space 2.x, including grouped…
This business card plate holds metal business cards in place for the Xtool F1 laser… Works with all metal business cards including the very thick 2mm+. (Most cards are 0.25 / 0.45 / 0.8mm). So, I got you covered! Note: > You can print…
FR Il n'est pas facile d'attraper la tête laser de la xTool S1 lorsqu'elle est au fond de la machine. Ces attaches facilement retirables vous permettent de la saisir et de la déplacer sans risque d'arrachage des câbles ou de déplacement…
I originally printed this in PLA since it doesn't need to be super rigid, a little compliance is good. However I would recommend PETG if you can. After a few months, PLA will creep and doesn't bounce back as much. Good amount of pressure…
This plate / jig holds an 8oz flask for the XTool F1 laser... (About ~ 237ml) Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls, honeycomb pattern… ** PLEASE: **…
Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…
This is a Remix, but it was posted in a FB group so I can't link the original. Original model posted by Hiddenwoods Art in an XTool F1 Ultra Facebook Group. I edited the model to fit the smaller ornaments I had. This jig is to make it…
These are extra legs the same size and thread as the ones sold by MakeBlock for the xTool D1. As usual, I have included my Fusion 360 files for anyone to play around with. I used Cura 5.1.0 with tree supports. The supports are not really…
Two jigs for processing business cards with the xTool F1 Ultra. One is a tight fit with dimensions of 86mm x 54mm for each card. The other is a loose fit with dimensions of 87mm x 55mm for each card. I generally use the loose fit, however…
An Xtool F1 pen jig that enables the protective screen to be closed while engraving the pens making it possible to engrave pens safely at craft fairs and events. Suitable for bamboo and metal pens. Pen clip can be placed between the…
Motivation The xTool RA2 rotary is a great accessory, but the included chuck jaws have a few shortcomings: Workpieces with shallow stepped inside geometry (lip) are difficult to get a good and even grip especially when tapered Outside…
This is a complete of fixed fences for positioning items on the xTool F1 Ultra. This set consists of straight, right-angle and cross fences in all relevant sizes. These are held in place with standard m4 thumb screws.
Diese Aufnahme habe ich ohne Support gedruckt. Druckzeit ca. 38 Min. bei 0.2 mm
I made calibration “stickers” with pin for xTool S1 engraver to use it on honeycomb and make it stay in place There are two versions. Normal version is good to go and tight version is a bit wider I tried print it from white on bottom and…
The outline template for XTOOL creative space is also available
A simple support to place RA2 at the center position on the F1 without trying to find mark
Riser to lift the xtool honeycomb away from the aluminum sheet and give yourself some airflow between them. Just print 4 of them. They fit tight. You'll obviously need to refocus as you are adding about 6mm to the overall height of the…
FR L'utilisation d'un rehausseur sur un laser xTool S1 vous ouvre plein de nouvelles possibilités. Cependant il n'est pas aisé d'utiliser certaines fonctions que vous offre ce laser sans devoir démonter ce rehausseur. Nous voyons ici…
Use the original screws and screw the baseplate to the back screwholes. All other files for the vise are available here: https://www.printables.com/model/281912-bench-mountable-4-jaw-3-jaw-2-jaw-vise-with-swapp
Simple template to engrave 4 brass coins.
Quick print jig for up to 12 pcs pencils or chopsticks. Fits in threaded holes on baseplate. Held in place by gravity. Prints upside-down, with pegs pointing upward. No support needed.
Designed to work with 3mm (1/8") thick materials. Recommended material: PETG Inspired by Lakeshore3D's P2 clips, available here: https://www.etsy.com/ca/listing/1481624168/slat-clips-and-material-locators-for
xTool's F1 Ultra comes with a detached control head. I found that I was prone to knocking it off the table or laying something on it and cancelling a running job so I designed this stand in Autodesk Fusion 360. This stand should print on…
Die Pins kann man verwenden um die Funktion zur Ausrichtung mit dem Foto zu Nutzen. Die Pins werden einfach auf die Bienenwabenplatte gesetzt und über die App von XCS kalibriert. Danach kann man einfach alles über das Bild ausrichten und…
Update - revised design available! I added an updated design because recently I noticed that during the automatic height measurement the M3 screws slightly touched the upper housing when the laser head was moving to the reference point at…
Top Center Indikator für XTool RA2 Pro Rotary M1
This plate accommodates a 4" or about ~101mm round coaster (wood, metal or Cork) for the XTool F1 laser. (see note about size…) Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15%…
These can be either a replacement or enhancement to the “L-shaped positioning piece” included with the XTool F1 laser. These L-pieces have a different hole location than the OEM L-shaped piece. To help out with “odd” things… *You only…
Print Take 4 knurled screws M4x10 for the edges I added a few cutouts to make it easier to remove the jigs
Xtool S1 lovers, this is a 90 degree vent for the S1. it is it fully reversible left or right. it's absolutely perfect fit. The standard Allan key tool will be used to install screws. It's a tight fit with the tool but worth it.
I wanted the honeycomb to be consistently located for reliable repeated engraving. The xTool Honeycomb Riser by cbabbman fit into the 2 brackets I have made. https://www.printables.com/model/252052-xtool-honeycomb-riser Thank you…
This is a prefilter for the Xtool f1 Ultra. You need 8x 10x2 Magnets (10x3 will fit too) and a piece of exhaust hood filter or similar. Fit the magnets in he holes on the base and the top then push the base into position. Cut the filter…
A simple stand to hold and display the Control panel for an xTool F1 Ultra at about a 45 degree angle. Makes it easier to see and use. Printed with no supports ideally in a similar colour to xTool green.
Been working on pint beer glasses lately and needed something to level the work area. Just a simple wedge. Printed in tpu to try to keep it from sliding around.
Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…
A simple 5 pos jig for stainless tag 43mm*24 XCS xtool file for template.
3D Printable extension suitable for the D1 Pro and 20W laser head.
In the EU, we can open windows for ventilation. This allows you to use the xTool machine with an exhaust system directly through a window. 11.3.2025 - Added version for 100mm hose No supports are required 0.2 mm layer height, 15% infill
Jig for aligning four 4" slate coasters on the xTool F1 Ultra. This one has shallow cutouts due to the inconsistent sizing and edges of slate coasters. Makes lining up four of the for repeatable results much faster.
The mounting areas has the same geometry as the OEM 3" outlet, but this will fit a 4 inch dryer hose. Reuse the same hardware that came with your P2. Just remove the 4 screws that hole the 3" unit in place. Then install this 4" outlet.…
Mit den Griffen lässt sich das Lasermodul sehr einfach bewegen. Der hohe Griff verhindert, dass der Laser an der Gehäusekante bzw. der Lichtleiste vorne anschlägt. Weiter kann er durch die Kerbe nicht hin und her rutschen. Die 20W und 40W…
I printed in PLA with 100% infill so I can tighten the chuck really well.
It's a bit hard to get a good grip on the xTool S1 modules to move them around. I made this for my 40W (I don't know if it will fit other modules or not). It's a little tight when attaching, but doesn't move at all once it is in place. I…
Remix of Robin's xTool F1 Vise base to allow the laser shield to close completely. Smaller thumb screw and adjusted base. Use all other parts from original Vise.
3D printable base for the Xtool F1 engraver (take out the center metal piece and put this one in). Place the side labeled back toward the fan/back of the engraver. Use this Xtools Creative space project as a template to lay out your…
90 Degree adapter for XTool F1 Ultra to 80mm hose Hated the straight one so i messured it and gave my best to fit it as good as possible. I print it right now (~5h) so pics of the done thing come asap Inside the adapter i used a 1mm plate…
I combined two models to create this design, incorporating features like feet and bolt-in-place for added stability. I specifically wanted my honeycomb centered and secure, so I added a bracket that can be bolted onto baseboards. The…
This is a jig for the 3x2in (76x51mm) rectangle and the 2.5" (63mm) round leatherette patches. It also has a handle for easy removal. I would really like to see your makes and hear from you about how it worked out.
Version 1: Erhöhung um 26,4 mm, z.B. für einen xTool M1 Ultra Version 2: Erhöhung um 46,4 mm, z.B. für “meinen” xTool S1, allerdings habe ich keine Standarderhöhung ACHTUNG !!! Ich empfehle unbedingt vor dem Ausdruck die individuellen…
I made this magnetic fume extraction setup for my xTool M1 hybrid laser and blade cutting machine. This makes it easier to move the machine around, and allows me to add a second fume extraction fan. I still wasn't satisfied with the…
AnkleKris is back with a new design: the Honeycomb Bed Pin! Made mainly for laser engravers, it fits any standard honeycomb bed. Just position the pin where you want it, insert the cylinder, and it expands slightly to lock in place—simple…
This Jig is made for the xtool f1 and large / normal size dogtags
I included a fusion 360 file with the blank templates so they can be customized. I printed these in pla with supports but no brim.
A simple plate model designed to hold six aluminum business cards for engraving. The cards are intentionally offset from the plate’s horizontal center, allowing the use of autofocus during engraving. Initially, I encountered issues with…
Wandhalterung für den Air Assist von XTool. https://amzn.eu/d/8GEQkoJ
Der 3D-gedruckte Abluftadapter für den xTool M1 Ultra ist eine spezialisierte Lösung, um den Abluftschlauch durch den Spalt eines gekippten Fensters zu führen. Der Adapter wandelt den runden Anschluss des Abluftschlauchs in einen flachen,…
Parts are printed in PLA which should be fine for this application Parts included in the set: 3d printed 100mm conversion adaptor 3d Printed Xtool back plate that replaced the one on the back of the machine 3d printed fan dummy. This kit…
Es sollten mind. 4 Stück genutzt werden. Einstecken in die Wabenplatte (Honeycomb) und dann Sperrholz 3 oder 4mm einsetzen. Hierdurch liegt das Holz nicht direkt auf der Wabenplatte und fällt nach dem schneiden sofort durch. So kann man…
Update - revised design available! I added an updated design because recently I noticed on my 40W handle that during the automatic height measurement the M3 screws slightly touched the upper housing when the laser head was moving to the…
Ich habe verschiedene Arten an Spannbacken für das Rotary RA2 von XTool. Durch die unterschiedlichen Spannbacken kann ich unterschiedliche Teile besser Spannen. Nr. Höhe Spannteil Gesamtlänge 1 7 mm 39 mm 2 8 mm 29 mm 3 20 mm 29 mm 4 7 mm…
Remodeled and some new to fit the xTool D1 Pro You will have to splice the cables to make them long enough. I reused the cables that came from the original frame (before the extention was installed)
This organizer ensures that your xTool tools stay securely in place, even when you open the riser storage. It is designed to storage xTool pens, the pen adapter, inkjet test papers, and all types of blades. Additionally, I’ve created an…
A plate to hold anodized aluminium bottle opener keyrings for the xTool F1 and xTool F1 Lite. It can hold 3 keyrings upright or upside down. The engraving heights are different for upright and upside down. I printed this in PETG, but PLA…
Mounting plate for the xTool F1 to laser engrave a logo on 8 pens simultaneously. Suitable for pens with a diameter of 11 mm.
Gridfinity storage solutions for all the stuff that comes w/ the XTool RA2. There are two models here to hold the rollers, one with the baseplate/drive unit and one without. If you don't need storage for the baseplate, you can save…
I wanted to connect my xTool F1 to the inline exhaust system I already had in my shop. I wasn't able to locate one specifically for the F1 so I went ahead and designed and printed one. This adapter connects to the xTool F1 and allows a…
This handle will help you to move the laser module on the xTool S1 20Watt laser without bumping the Z height sensor or cabling. This handle fits very tight. Hook the bottom clip on first, then slide the top clip over the module. It may be…
Xtool F2 Ultra 90 degree Ventilation adapter, used on the back side fan outlet
This is the "back side" … In other words you can engrave the back side of the 8oz flask with this plate / jig… ( 8oz / ~ 237ml ). For use with the XTool F1 … Note: > You can print this plate in any filament you want. (However, a “tough”…
This is a dust cover for the XTool F1 that also works as a button bumper… Overall it minimizes dust from getting inside the electronics and possibly damaging the lenses. It also protects the buttons from possible damage . All this while…
Smooth Y-Adapter to connect two xTool machines to their AP2 air purifier. No supports required. Print on the AP2 (single pipe) end. I used PLA. Requires Tinkerer4000's scalable butterfly valve saled appropriately Scalable Butterfly Valve…
Tired of finding the correct angle for your rotary tool? This small part will help to raise the rotary tool plate to the desired angle. It fits into the center hole/gap of the base. Printed with PLA with 0,2 layer height without having…
Corner jig for xTool F1. If Paired its a jig for 100mm coasters etc.
This Jig is made for the xtool f1 and small dogtags
Pen and pencil Holder for your Xtool F1 laser. Print one if you want to use it without slider extension and you will have 10 places for pencils or pens. It goes inside that opening on the base of F1. If you have Slider Extension than…
About the design I recently bought an xTOOL S1 diode laser engraver/cutter. Once unpacked it was found that the exhaust port adapter that is supplied with the S1 is too large to connect to the xTOOL Fume extractor that I also purchased.…
This exhaust duct attaches directly to the back of an xTool P2, replacing the existing duct. It lets you fit the whole machine closer to a wall and vent the exhaust left or right. There is a feature for adding a zip-tie to secure to the…
Xtool D1 Laser Feet (square version for better alignment to a grid)
Adater to aid flexibility in positioning xTool F1. Assuming it can be used for other 2.5" hoses or scaled for other sizes.
13 January 2024: Included an upgraded Filter Module (FilterModuleHighVolume.stl) that holds about 30% more pellets than the old one with no changes to the outer profile. Also included a STEP file of the whole thing for adjustments or…
Designed in Fusion and printed on a Mk4. Fixed the unit to a ¼ inch base which was cut out of a larger piece to function as a jig for easy alignment within a S1. Printed in PLA with 4 perimeters and 20% infill with input shaper. Support…
Simple foots rack for xTool D1 No glue needed No supports Can be printed in 0.3 mm
