1031 modeli
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: wrench for badly accessible nuts under the sink long handle (14cm) wrench/nut 12mm for threaded rod up to 8,2mm (which fits inside the wrench middle hole) remixed original (thx volkhen !), because i needed: different nut size longer…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Even though I liked the minimalistic design of the original LumenPnP strip feeders, they had some difficulties with both thicker paper tape (like 1.2mm thick with more bulky capacitors) being hard to push all the way through as well as…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
You can print the PLA rim without supports. For the tyre I recommend the supports only from the printing table. There are two sizes: 34mm and 43mm wide. You can find all measurements in one of the images.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Drift tires for all 1/10 RC cars with a nut width of 12mm. I recommend printing with support structures everywhere. I used PLA for the print, to increase the life I recommend PETG. In order to save material, the infill can be reduced. I…
Wydruk około 11,71 €–14,31 € nettoWstępna wycena jednego wariantu
OnShape Link: https://cad.onshape.com/documents/c8607a5cf3dd5ac7ded55e04/w/435063b982fa15cfb9cda600/e/7158
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
This version is updated. Please use this instead: https://www.prusaprinters.org/prints/27855-updated-12mm-x-8-shields-with-ladder-locks-for-8mm Print instructions This is for PETG. All print settings are included in the 3mf file. You need…
Wydruk około 4,79 €–5,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a standard 12mm hex that is 2.2mm wider than a standard hex, with slightly more depth for the pin. I've printed this in both PLA and PETG. With PETG the fit can be tight due to the stringing, so a little bit of post processing…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Thimbles are very handy when making end splices. Yet for some reason I always have the wrong size for the type of rope I'm using….. That's why I made a CAD model. I made 4 standard sizes and included a STEP file so you can make your own!…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inexplicably, Thule doesn't include an adapter for 12mm thru axles with the Roundtrip Transition hard case bike travel box (even though it's available as an accessory). This part solves that missing item. NOTE: This only fits the…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…
Wydruk około 6,31 €–7,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hexagonal Adapter for https://www.3dsets.com Lineup. 8mm to 12mm Wheel Receiver
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
12mm Gps bar Phone holder attachment for Yamaha Tenere 700. Use only ABS filament, and %100 infill is must. gcodes has different outer diameters ( same inner diameter, 12mm) made with Cura for ABS and %100 infill.. I recommend you to use…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Dyspenser do zaklejek na przestrzeliny z dodanymi napisami i oznaczeniami strzelnicy Braterstwo W23.
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
Um zu erkennen ob die Radschrauben meines Wohnwagens sich gelockert haben bzw. gelockert wurden habe ich diese Indikatoren designed. Mit der Hilfe sieht man auf den ersten Blick ob mit den Radschrauben alles in Ordnung ist. Die…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Haar-Trimmer-Aufsatz 12mm, passend für Carrera Classic Modell 22163903 Art. 5835
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
mit PLA gedruckt Druckeinstellungen Füllung 15% Schichthöhe 0,2mm Stützen nur Box-Teil4.stl
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This is my design for a screw-mounted cable clip. I designed it to work in tight corners while concealing the screw. It is a two-part system for easy installation. First, you attach the mount to the wall, then simply clip the cable hook…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A pipe reducer connecting a sheet roof outlet to a DN75 plastic pipe. This type of reducer isn’t available in hardware stores, I 3D-printed it myself.
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a U2412Mb monitor and a 3D printed bracket that…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
With this I can get square nodes out much faster. Tested against super thick and tight pixstrip extreme, I've only pulled 30ish pixels with this so far but it's held up okay, v3 reinforces it a bit and makes it pointer for easier wedging.…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am currently rebuilding my fence and wanted to make an easy gapping tool for between pickets. I made a 8mm 10mm 16mm tool first and as it was printing decided it may be wider than i wanted so I made this one as well. Takes 2 of these to…
Wydruk około 3,35 €–4,10 € nettoWstępna wycena jednego wariantu
Assortment of simple nail-in cable clips. Cable diameters: 3-12mm in 1mm steps. Nail diameter: 2mm Category: DIY
Keep your chain on fake cogs to help with chain cleaning after taking off rear wheel. This tool fits 12mm thru axles. Sized with slop to allow shifting of the derailleur. No reason to pay $$ for one from Park Tool etc.. No overhangs, no…
Various Cable Clips Diameter from 3-12mm up to 5 cables Nail-Diameter: 2mm
Remix Brother Label Design. (thank you elumspe ) The information used referred to the contents of bambu studio. (Do not download the stl file. it used for upload post) for brother 12mm film. I haven't tested anything other than 12mm, but…
Holder can mount with screews, glue or cable ties. 2025: I add a OpenSCAD file. Now you can easily design your holder for your special need. Hint: create a 2 hole holder with a “base_length = 8;”
Positive and negative counters for Magic: the gathering covering from 0/0 to +-6/+-6. Created from scratch, but inspired by BMacIntosh's +1/+1 dice counters. Printed with .4mm nozzle at .2mm layer height, and a color swap for the last few…
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Minor update: Still works if you've installed the CFS kit! Original Post: The chain riser was one of the first mods I printed and used. I quickly upgraded my printer with the frame riser extension, and the included chain riser didn't have…
Fedezze fel a kazánkészési évenkénti! Az új, 3D-s nomatt kazán földrajzi árukkal együtt egy célunk, hogy minden horgász könnyedén és pontosan elkésett sajtsa. Az innovatív tervezésnek és a csúcstechnológiának megfelelő kiegészítőnek kell…
Solaris Urbino IV 10 UPDATE aug'20 | 3D Warehouse (sketchup.com) - odsud staženo
This soldering tool is designed for 8mm, 10pin, or 12mm LED strips with 2, 3, 4, 5, or 6 pads. It's so simple, feed your strip in under the bridges, feed through your wire through the holes (you can drill out the holes if your printer…
Ranging from 4mm thick to 8mm thick these are for RC cars with axles up to M4 that use standard 2mm x 10mm pins. These will also work for smaller 1/16 and 1/18 scale that use M3 and 1.5mm x 10mm pins. The 4mm thick adapter will allow you…
This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine. If you test other types and they work, please let me know in the comment section so i can add them as…
Hi, to download Air Hose Connector Repair 6mm, 8mm, 10mm and 12mm. Connector is my production from the beginning of the planning stage to the final stage, printed, corrected until satisfactory results are achieved, the tested works very…
12mm Hex Wheel Hubs for 5mm axles. Work on 2WD and 4WD vehicles. 12mm hex in various widths from 4mm to 12mm. Perfect for adjusting fit when using alternative tires and bodies. Category: R/C Vehicles
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
Updated Textured PEI Plate & PEO cool plate with new QR Code for 12mm label Brother P-Touch printer. It is useful if you have Lidar, so it automatically detects the installed plate. You will need P-Touch Editor in order to open the lbx…
Made specifically for 12mm wide strips such as 144 leds/meter sk6812. It has a 45° angle and i mounted mine to the bottom of a shelf. The strip should slide in without any adhesives. To mount the strip to a surface you can use hot glue or…
The amazing viper snake uploaded on thingiverse by 3dskayil now compatible with 8mm, 10mm and 12mm glass eyes. :) Three variations provided. One for 8mm glass eyes, a bigger one for 10mm glass eyes and the biggest one for 12mm glass eyes.…
Please leave a ♥ Like if this print was helpful to you :-) A super simple version of a doorstop that features 1-12mm height and 7cm length, making it pretty compact. It will work with most doors. If you need a different size, simply scale…
3D printable snow tires forany 1/10 scale car with 12mm hex on the wheel mounts. (and enoght clearance for the big wheels 110mm) I put them on my cheap nitro buggy and it worked great... at least when the snow wasn't that deep. In deep…
Remix of the great corner jig for routers by Woodenti to be usable with DeWalt guide rail clamps with a 6x12mm profile (see photos). The new holes are all-through, so that the clamps can be fully inserted. All files except for the…
short : Important notice: If you choose to buy it — thank you so much! https://cults3d.com/en/3d-model/gadget/spiderbeam-12m-mast-ham-radio Your support means a lot. By purchasing this model, you are authorized to: ✅ Print, copy, and…
Screw to fit in a webcam so you can mount it.
Gridfinity removable label lid (1-4 bin-wide, for 9+12mm labels), not increasing the hight of the bins. Designed for and tested with these bins: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins…
It will fit a big variety of different switches to protect. (12mm bore). It also features additional holes in the cap, in order to feed a thin wire trough. by this you have to tear the wire before using, indicating a use has taken place.…
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…
3d printed Connector for jumper wire (Dupont 12mm) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
Small 12mm chain riser with PTFE tube guide for Creality K1/K1C (Remix) This riser elevates the chain by 12mm from its original position without altering the original bolt placement. And you can remove front fan casing. And have Tube…
Turbomac wheel for 1:10 rc cars (Onroad/Drift). 12mm Hex. 5mm offset 6mm offset 7mm offset 8mm offset 8,5mm offset When you print the wheel in your desired offset, you will need to print the vent with the same offset rating to make it…
Once upon a time... I felt the need to sort my gravel, soil, compost and other such liquidicious solids. If only I could easily remove such pesky things like small pebbles or sticks from my luscious powders! Behold! I have created the…
Description I needed a simple temporary fix to block a xenon headlamp washer hose while i was working on the unit itselft, so there it is. I needed a 10mm one, others are just a scaled up or down versions. It's a tight fit, you might want…
this clip holds an led strip at the wall. It has been modelled for an WS2812b strip that is in a silicon tube. the tube measured 12mm x 3.6 mm, the clip leaves even a little more space so the strip goes in without use of force. They are…
These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…
Simple bin for brother TZe Tapes. 12mmx4 and 18mmx3 available so far. thank you to scheff for the step files! https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization Gridfinity by Zack Freedman:…
This is a simple enclosure designed to mount a button or switch. It is inspired by the typical style of industrial 22mm push button enclosures, but scaled down for a smaller button size. It is sized to fit M12 panel mount style switches.…
This is a useable (low) friction ring with 12 mm inner diameter
I did not like the open 12mm rods and so I designed endcaps and feet for it. The feet and rod caps fit 12mm rods for the Hadley telescope usually used in the metric builds. Its a nice tight fit so that they just needs to be pressed on but…
Update V2 06.10.2024 // 11:10: Print Profile V2 and STLS have been updated !!! Updated Slider geometry Updated Body geometry Magnet hole tolerances from +0,4mm to +0,6mm to allow better gravity feed and accept higer range of magnet…
I'm re-designing it because I needed a 14mm CCW inside.
I modified the Prusa MK3s R4 Extruder body to fit the 12mm probe. Print instructions Category: 3D Printer Extruders Summary I modified the Prusa MK3s R4 Extruder body to fit the 12mm probe.
Remix of Heavy-Duty Wall Hook by chuckamcknight to allow for 12mm pan head screws Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: .2 Infill: 25 Notes: I used 4x walls & layers with 25%…
2020 aluminum profile 12mm linear rail alignment clip
Adapter to connect a 8, 10, 12 or 16mm hose to a device with 1/2 inch thread. Printing For optimal strength print in 45 degree orientation with brim and support.
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
This is the next iteration of a 3d printable chisel router plane. The original was not great ( Chisel Router Plane 1/2-inch (12mm) by JohnMartin | Download free STL model | Printables.com ) but it worked okay. I had to resolve some…
This is for a 12mm shaft toggle switch holder replacing Toyota Switch blank. **This fits only the Tall size of Toyota Switch blank (40x22 mm ) Print on the flat backside, and support is required. UPDATE 6/27/2021 (v5) : Improve the fit.…
CURRENTLY UNTESTED (hopefully) make your Ender 3 Faster! Check out my video for more information!
RC10 Gold Pan Rear Wheel 12mm Hex Adapters in various sizes. Allow you to fit cheap aftermarket wheels to the rear of your RC10. I saved them in various size thickness. I am using the 5mm thick ones on my RC10 with some cheap aftermarket…
Material used: PLA Can be printed on its side so is needs no supports.
It's just a mount, which sits on top of the four screw-threads on the backside of the Aoocci C6Pro.
+5mm offset for the WPL D12 when you want to run more angle without rubbing on the upper control arm and overfenders . WPL D12 D42 focused 5mm to 12mm aqdapter . May fit other wpl models but not sure if it will work with them .
I modified the Prusa MK3S+ R6 Extruder body to fit the 12mm probe. Upravil jsem tělo extrudéru Prusa MK3S+ R6 tak, aby se do něj vešla 12mm sonda.
Print Settings No rafts or supports required 0.4 nozzle used Base settings of Bambu X1C eSUN PLA+
Umarex T4E 68 bullet for 12mm sphere
Newer more betterful version Chisel Router Plane 1/2-inch (12mm) v2 - Hand Tool Boogaloo by JohnMartin | Download free STL model | Printables.com I went through several iterations of this before I came up with a design that worked. This…
Set of Hex Screwdrivers with a rotary end cap, magnetized tip, and multiple options: Sizes (Length without Hex bits): S = 5.7 cm M = 7.9 cm L = 9.9 cm Options (2 Options per size): 12 mm Hex hole 24 mm Hex hole All handles come with a…
Brim Curler 12mm Hat Making Tool
This set includes distance shims in thicknesses from 0.5 mm to 12 mm , perfect for woodworking, furniture assembly, and any situation where precise spacing is required. Ideal for aligning, leveling, and adjusting components. Durable,…
Extendet 12mm thread, I had problem with durabilyty in this place. Slightly shortened 14mm thread, didn't fit my tracer unit. This is my first work with threadet think in 3d programm, so don't except something excellent.
WPL D12 D42 focused 5mm to 12mm aqdapter . May fit other wpl models but not sure if it will work with them .
##English version below## Dieses Modell ist für French Cleat Leisten mit einer Stärke (Dicke) von 12mm und einer Höhe von 50mm. Es kann auf beiden Seiten eines Halters befestigt werden. Der untere Teil dient als Stütze an der Wand und…
This adapter allows the installation of 17mm hex wheels onto 12mm hex spindles. The uploaded STL files are designed specifically for those wheels https://aliexpress.com/item/1005005155368361.html. You can use the provided SCAD files to…
A LED strip holder for 12mm LED Strips. For use with 4mm Spax screws
This is a 8-stacked print which includes a modification to the model, the support tower for the pins, and the slicer settings. Each piece has a height of 12mm, which is enough in my experience, especially with PETG. I've also added my own…
I made this honeycomb pattern to make life a bit easier when designing custom brackets and such in tinkercad. I simply import this model, make it empty, and I have a quick and easy way of removing material without losing much structural…
Make maximum walls = solid in PETG and send it. Happy printing !
I've been building a modular synthisizer (with 3d printed panels) and need to quickly tighten a lot of jack sockets and potentiometer nuts. So I whipped up this little 10mm/12mm wrench that lets me do it. 2/10/2021 - Added a modified .stl…
Simple CPVC Clip to hold 12mm LED Bullet Pixel. The pixel faces the front and is secured in placed via zip-tie Category: DIY
This is a 1.9" RC wheel modelled off the factory rims on my 2007 FJ Cruiser. Fits 1.9" tires. (1.9"=48.26mm) Dimensions before material shrinkage: 21.3mm wide 49mm diameter +2.5mm offset 12.35mm hex 4.5mm center hole Printing in PLA fits…
Calmps for spiderbeam 12 mtr, incl guiding rings and groundplate Mast clamps and anchoring rings for Spiderbeam fiberglass mast 12m Alternative to the mast clamps with rubber and shrink tubing. Particularly suitable for portable use - no…
Original file had to much play in the 12mm tire and around the 8mm axel. The updated file fits perfectly snug on the model 7 buggy. Printed with PLA .15mm with a brim.
2040 12mm linear rail alignment clip
All you need to assemble these is some glue to glue the wheel to the rim and 144 M2x10 bolts. I used Hex Socket Cap bolts but you could use pretty much any head type you wanted. I'd suggest printing the wheel out of whatever you want and…
Three-way connector for 12mm square tubing. One side of the middle doesn't protrude to the edge of the aluminium so that it can be printed without supports. The downside is that it won't look great if used to connect pieces that are…
![Nail-in Cable Clip [3-12mm Assortment]](https://media.printables.com/media/prints/633203/images/5012989_b04f63af-5a91-4e4b-bcdb-120b551b2321_1964838e-5184-4627-9b23-d65ca6a17420/large_display_assortment_633203.png)
