Liczymy pasujące modele…
Straightforward cover for the EBB36 Gen2, which has a different shape than the classic EBB36 and thus requires a new case. Flip onto the top and print, add supports on print bed only
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
This model is currently for the 1.0 version of the EBB36 board. The screw and strain relief positions changed on the 1.1 & 1.2 versions. The Big Tree Tech EBB CANbus boards are a nice way to cut down on wiring to the toolhead. They're…
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used
EVA 3 compatible mount of BigTreeTech EBB42 Toolboard and Phaetus Apus extruder. BOM Note: Some screws can be salvaged from the Apus itself EBB42 Item Qty Description M3 x 4mm Heat Inserts 13 6 for extruder mount, 7 for toolboard mount M3…
Original RC10B2/B3/T3 Graphite project page: https://www.rc10talk.com/viewtopic.php?t=32679 You will get good quality and strong printed parts if you order them somewhere SLS printed in PA12 material. MJF will work nicely also. All carbon…
Fits well. Does not include anti-roll bar pivot. No supports needed. Print Settings Printer: MPMiniDelta Rafts: No Supports: No Resolution: .07 Infill: 100 Filament: HobbyKing PLA Black Post-Printing ============= Run a 1/8th drill bit…
As I mentioned earlier, my friend fortunately had most of the original trigger guard intact, so I was able to measure the important parts. The lower part of the trigger guard on my model is a bit looser, but it doesn't affect its…
Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper
Mounts tilted between spacers from: https://github.com/chirpy2605/voron/tree/main/general/PCB_Mounts/STLs/G2SA
Conduit latéral pour extraction d'air permettant un placement plus aisé du graveur, même contre un mur ce conduit a été conçu pour être installé à l'arrière du boitier B3 de protection Il peut être monté pour déporter le conduit…
Case for BTT EBB36 for BLV MGN Cube. I was building this case for use with the Metal kit and Mellow NF-Sunrise extruder. Maybe it will work for your configuration too. Assembly: 4pcs M3x8 screw 6pcs M3x6 screw 8pcs M3x16 screw 2pcs M3…
This is a model for the Centauri Carbon to mount the EBB36 Gen 1 to the top side of the tool head and keep full range of motion. It uses the stock screws for the original usb cable as well as the drag chain. the EBB36 mounts with M3x6…
Ich habe den StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2) umgeändert, so das er auf einen Orbiter V2 passt. Ihr braucht 2 M3 Einschmelzmuttern, um das PCB zu befestigen. Ich empfehle ABS
mount for sherpa mini and E3NG carrige
This is a printable replacement for the part covering the hole opposite the motor on the Tamiya TL-01 chassis. It matches the original part fitment, and can directly replace it. It protects the rear gearbox from receiving material from…
Fan mount for BTT ebb36. I remixed a model previously for a nema 17 motor mounting.
This replaces the clip on the 2015-2023 pony puddle lights/lamps and will most likely fit 7th Gen Mustangs (2024+) as well. They are known for breaking. I printed this part with the clip opening facing down in ASA. To use, trim the…
EBB36 Can Board Mount IGUS Chainflex Mount w/ PG7 Threads. Pairs with: Umbilical Rear Passthrough Recommended to solder your molex terminals after crimping. They just need a tiny dab. Solder with the terminals facing up in the air so the…
I could not find any stands for my USB switch, so I designed one in Blender. This stand is intended for the StarTech.com 4 to 4 USB 3.0 Peripheral Sharing Switch (model number HBS304A24A ). It raises the USB switch at a 45 degree angle,…
This is a mount for a 3010 fan meant to connect to, and cool, BTT EBB36 toolboards with some metal standoffs. This was designed for use with the Calamity Toolhead and this EBB36 mount . Hardware Metal standoffs, 25mm+ (depends on how…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
WWBMG toolhead PCB mounts seem to be uncommon, and even moreso when you want the umbilical anchor to be inline with the bowden tube / central axis of the toolhead. This toolhead PCB mount takes care of that. Note: The relief is apparently…
Für die Anzeige habe ich den M503 DRO mit Sensor und 1 Meter Magnetband von AliExpress verwendet. Das Gehäuse wird mit zwei Magneten Durchmesser 15 mm und 5 mm Dicke auf dem Anschlag gehalten. Die Sensorhalterung wird mit den vorhandenen…
PG7 Gland mount for the ebb36 on the lgx lite. BOM: 18MM STANDOFF x2 PG7 Gland with cable relief x2 (milage may vary depending on build)
Recently printed a Skadis board to hold my handhelds rather than them dotted around the place. Noticed quite a few didnt have any designed (or had poor reviews) so I've designed my own. Fits well enough for me so hopefully helps others…
Die Neuauflage von B3D-Autodarts-Automatic-Score System ist nun endlich verfügbar. Automatische Darterkennung? Mit Autodarts & Co. Kein Problem. Aber wie oder was erkennt die Darts? Dafür benötigen sie zbsp. Solch ein Set, um Kameras…
because heat sets BOM: - 2x M3x6 BHCS - 2x M3x5x4 Heat Set Inserts (Voron Spec)
This is my Sony Speaker Holder to mount it to my bicycle. So i can hear music when riding in the forrest or around the lake. I publish here also the Freecad files, so you can adapt it to your bike frame. Enjoy your music while cycling.…
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
feel free to modify and improve the design if needed ;) Just remmember to share and comment.
I couldn't find a model for the CAN EBB36 mount on the Orbiter V2 with a filament sensor that doesn't use hex stand-offs and at the same time provides free access to the filament sensor connector, so I designed a simple mount myself. I…
I made this wrench as a replacement for the original one. I made it as wide as possible to get a better grip. It fits snugly. I printed with: PETG 0.4 Nozzle 6 Walls 6 Tops/Btms Infil 80% Rectilinear
Mounting bracket for EBB36 toolboard on stock Sovol SV08 toolhead. Relocation of the front part cooling fan is not required. But trimming of the top of the stock toolhead cover is required to allow connection of the usb and/or CAN wiring.
add two m3 heat insert hole for ebb36 on front part
Remix of the Wall Mount for Lenovo M11 Tablet (2024) to fit a Lenovo K11 plus to be used as a Home Assistant dashboard. Using Inslogic WoodFill Maple PLA, the 0,2mm balanced profile and ironing, this came out nice using my Prusa Core One.…
This is a model for the Centauri Carbon to mount the EBB36 Gen 1 to the top side of the tool head and keep full range of motion. It uses the stock screws for the original usb cable as well as the drag chain. the EBB36 mounts with M3x6…
Hello, this is my first model uploaded here :) I have made adapters for parts I use in my E3NG. You need to thread spacers. I printed it with ABS with Voron settings (4 walls, 40% infill, 4 top and bottom layers) Hardware used: M3x8 x6 M3…
Mount for the EBB36 Gen2 for an Orbiter 2.0. Please see the original for more information. This remix has the additional lower mounting removed that can be used with the A4T. I'm looking to use it on a custom toolhead. The original would…
Wanted to do something new and not able to find this type of keychain, so i decided to create one. Print settings: Layer height 0.2mm, 100% infill, nozzle 0.4, ironing on for bottom black keychain. Keychain is 80mm long, 3mm thick
Parkside PFBS 12 B3 Holder, I've made this with screw holes however I hot glued mine under my desk, it can mount vertical or horizontal. Feel free to use as you please
BOM Item Qty M3x5x4 Heatset Insert 4 M3x8 SHCS 6 M3x20 Standoff 2
WWBMG extruder for AntHead motor, and ebb36 cover with 3010 fan
I made rough changes to the 5 parts that are required to be amended to mount a BTT EBB36 Gen 2 toolboard to the CN3D Xenomorph Orbiter. Use the same print settings as for the main build. All parts should be correctly orientated. Some will…
DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used
Mount for EBB36 board designed for the Archetype Breakneck toolhead with Sherpa Micro extruder. This version places the EBB36 on the left side of the toolhead (opposite to the extruder motor) for cleaner wiring and better weight…
This toolhead's MCU is a Fysetc H36 which uses the same mounting pattern as the EBB36 but has a preterminated cable that has no locking mechanism. I had problems with the cable coming loose and devised a quick, adjustable, easy to print…
I designed 2 nozzles for our DUB361 Makite leafblower to make a bit more useful. Especially for cleaning snow and another heavier materials and potentially for drying. One round and one flat shape available. Dont use the original locking…
Edited the existing WWG2 mount to support the EBB36 Gen2. Added clearance under the top of the board and slightly increased the standoff height.
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
Extended the rear part for 3,6mm to fit an 3010 Fan properly, without bending.
Audi 80 OEM switch frame for behind the centre console switches - 893941567B - printed in ASA because I hate PLA for parts :) Recently broke mine removing the dash, someone might have a use :)
Ich habe auch den Passenden Schlüsselanhänger dafür ;-)
Description There were no EBB36 Gen2 mounts for Voron v0 & Dragonburner & Sherpa Mini using all 4 screws, so I made one. I didn't want only 2 screws holding the PCB with all the forces from the stiff umbilical. I've also included a…
This is a custom designed I/O shield for the MSI B360 Gaming Plus motherboard. It is a perfect fit for the case frame, featuring integrated locking tabs and small locks to ensure a secure, "clip-in" installation, preventting the shield…
GCode is for a CoreOne with 0.4 HF nozzle and ABS print material. Height modifier set to help print the ziptie pieces
EBB36 Umbilical Mount and PCB cover compatible with the LGX extruder without springsteel only flat surface and i enlarged the cable tie openings to get bether fit
Straightforward cover for the EBB36 Gen2, which has a different shape than the classic EBB36 and thus requires a new case. Flip onto the top and print, add supports on print bed only
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Print flat against bed, optionally with support on build plate
There is no space left behind your stepper for EBB36? Mount it on the size! I attempted to mount the EBB36 behind the stepper of the ProtoXtruder of my Ender 3 Pro, only to find out that in order to to so, I have to limit the movement of…
Демпфер-втулка корпуса воздушника, тестил на Пассате б3 g60 syncro, по каталогу идет на приличное количество машин VAG семейства Damper bushing for the air filter housing, tested on a Passat B3 G60 Syncro, also fits a large number of VAG…
onewordFOURWORDS' model was close to what I was looking for but was missing a place to hold the piano wire that I use to stiffen up my umbilical bundle. There was no CAD files provided in the original so I had to start from scratch. My…
This is a remix of the original model by @RenatoKulman. I made this by request to fit a Lenovo M10 TB311FU model tablet. The main idea was to have a slim small formfactor usb-c cable that hides in the wall mount. I have added the used…
Introduction This is my second remix of the excellent Orbiter mount made by @niefachowy since I like it so much. Since my earlier remix I have now started using a Dragonburner toolhead as well as the alternative mounts for them.…
This is a custom remix designed to mount an E3EZ board alongside an EBB36 Gen2 USB converter in a Voron V0. The goal was to create a compact, clean solution that improves wire management while keeping both boards easily accessible for…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to prevent…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Emisar DW4 mount snaps right into the Skilhunt HB3 headband! There's a ridge in the design that matches up with the headband grooves in the DW4 to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Dual D2 holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the D2 headlamp to…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H53 or H503 mount snaps right into the Skilhunt HB3 headband! Works with H53 and H503 series headlamps. There's is a conformal design…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Emisar DW4 and Emisar D2 mount snaps right into the Skilhunt HB3 headband! The ridges of the headband mount align with the ridges on the DW4…
A simple wall bracket so that the small cylindrical base station Arlo VMB3500 can be mounted on a wall. Brings better order to that shelf with the router and everything. :-) Print in PLA or PETG.
Nutadapter für die Einhandzwingen von Festool und Ähnliche für den Schiebetisch der Hammer K3, B3 oder C3. ACHTUNG! In der Nut ist ein überstehende Schraube (siehe Bild), deshalb zuerst das Adapter in die Nut einführen und dann die…
Ein Nutstein der Größe M8 für den Schiebetisch der Hammer K3/B3/C3. Benötigt wird noch eine M8 Mutter. ACHTUNG! Die Benutzung der hier dargestellten Druckteile/Werkzeuge erfolgt auf eigenes Risiko und Gefahr; der Einsteller übernimmt…
Ein Nutstein der Größe M6 für den Schiebetisch der Hammer K3/B3/C3. Benötigt wird noch eine M6 Mutter. ACHTUNG! Die Benutzung der hier dargestellten Druckteile/Werkzeuge erfolgt auf eigenes Risiko und Gefahr; der Einsteller übernimmt…
Nutadapter für Niederspanner von VEIKO und Ähnliche für den Schiebetisch der Hammer K3, B3 oder C3. Lochgröße: siehe Bild ACHTUNG! Die Benutzung der hier dargestellten Druckteile/Werkzeuge erfolgt auf eigenes Risiko und Gefahr; der…
a horizontal drag chain mount for the ebb36 on a xol toolhead
I designed this model for my speaker (Sony SRS-XB33) as a shower holder. I just thought I could share this model with the public, as you have the same speaker. When you are inserting your speaker, use extreme caution because it is very…
HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…
Simple printable in case you are missing the brass spacers to mount your EBB36 to your motor mouting bolts on a sherpa mini extruder. Need 4 m3 heatsets.
Since EBB36 sports a rounded aesthetic I decided I should dip (and apparently sink) into the motif. After many hours in CAD and uncountable number of energy drinks this piece of engineering was made. Aptly named Cuckoo clock, for the…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
A very simply anti-glare protection for Dell WB3023 webcam
Holder for a StarTech.com Mini Dual 4K Monitor Thunderbolt 3 Dock with DisplayPort + Ethernet (TB3DKM2DP) dock. This holds the dock to the side of the desk. Which gets around the problem of the stupidly short thunderbolt cable on the…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Wurkkos HD10 mount snaps right into the Skilhunt HB3 headband! Works with Wurkkos HD10 series headlamp. The width of the mount is made to fit…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Skilhunt H150 mount snaps right into the Skilhunt HB3 headband! Works with Skilhunt H150 series headlamp. The width of the mount is made to fit…
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
This case fits HRD-B3X module with 4000 mAh battery. The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for…
Needed a bit more vertical clearance for the EBB36 on my StealthChanger build so I created this mount/carrier for it and also tried to get it as rigid as possible with just the two mount points. There are two versions, one where the EBB3…
Install so the board is facing backwards.
![[Heat-set] PG7 Gland Adapter for EBB36 Mount](https://media.printables.com/media/prints/fe8e5fba-0bc8-4c4f-bec9-1c748b11de5b/images/9322507_12776c26-cce0-468f-88ca-336265715061_1a417b2b-bc76-4aee-bab8-5a3d21de6b46/photo_5123123401572069014_y.jpg)
