133 modeli
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
Case to hold a LD2410 MMWAVE sensor module and a Wemos D1 mini board. The radar module can be rotated horizontally to adjust the angle and direction it is sensing. Four parts: The case that holds everything A holder for the radar module.…
This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…
Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…
Descripción: Este soporte ha sido diseñado para montar un ESP32-C3 Mini junto con un sensor LD2450 de manera compacta y eficiente. El diseño incluye una base redonda ajustable con sistema giratorio que permite orientar el sensor con…
Spliced together a few different files to fit my own requirements. You may need to re-size/check the carrier dimensions depending on your own ESP32 board. I designed this to use with Jumper cables, i didn't have a screw for the DHT sensor…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
The model has multiple axes of rotation and is quick to assemble. You can also remove unnecessary parts of the fastening mechanism! This model additionally uses 8x3 magnets and 2x8 bolts. The software can be found on this page :…
Case for HLK-LD2410C mmWave & D1 mini ESP8266 to be added in a room or to be put on a wall. Material used for printing: PETG
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
I needed a Case for the LD2410C which fits a d1 mini or esp32 d1 mini, so i designed this one.
Caja para D1 Mini y LD2410
Adjustable Case for ESP32 WROOM (38 pins) + LD2450 This case is designed to provide a functional and aesthetic solution for projects using an ESP32 WROOM (38 pins) and an LD2450 sensor. Key Features: Ventilated design: Hexagonal grille…
Ce projet DIY est non seulement accessible et économique (coût total d'environ 7€), mais il est également personnalisable pour s'adapter à divers scénarios de domotique. Que ce soit pour allumer les lumières en fonction de la présence ou…
No supports needed. Model in picture printed on Prusa MINI with PLA.
The firmware can be found on the official website esphome
I was in search for a case for the popular LD2410B radar presence sensor. However, non of the versions I could find matched what I was looking for. I had LD2410Bs with and without headers here. I also ordered different USB-C breakout…
Human presence sensor housing, could not find any casing for the older ESP 8266, this is my first design so, feedback are welcomed Printed with a 0.2 resolution. Use 4 wall layers if to avoid infills on the lid. Screws needed: 2x 25mm M3…
A wall mount radar presence sensor with a LD2412 that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). Instructions: bend the pins of…
The case is designed to house ESP32 C3 Super mini modules with OR without pins soldered to it. The lid has two variations: Plain and with radar symbol. Features Space for the ESP32 C3 super mini and HLK-LD2450 modules, bluetooth antenna…
Case for a LD2410B combined with a ESP32-C3 SuperMini. No supports required.
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
Radar dish support for HLK-LD2410C motion sensor mmW 24GHz. Printed with 0.4 nozzle, PLA, with organic supports.
Case designed to fit following components from Aliexpress. There are many clones and alternatives out there with very slightly different dimensions. WeMos D1 Mini ESP8266 ESP-12F WIFI HLK-LD2410 LD2410 24G FMCW 24GHz *12/26 - updated…
In this case fits only a LD2410C, see the pictures. This is meant for bluetooth use case. So if you are integrating this sensor over bluetooth to Home Assistant or any other Home Automation Software, this Case fits perfectly.
Ich verwende dieses Sieb, um geshredderte 3d Druck-Abfälle für die Weiterverarbeitung im www.artme-3d.de Filament Extruder zu sieben. Produkte - ARTME 3D (artme-3d.de) Um die Druckzeit zu reduzieren habe ich eine 0.6 er düse mit 0.35…
Sensor housing for the esp32 super mini c3. I printed on PLA and the lid is a snap in design (though feel free to modify to use screw posts). The ESP sits very snuggly in the case - so you'll want good tollerances.
Case to house LD2410 and D1 Mini. Printed in PLA, no supports.
This case is based off of Digital Juice's. This update fits the LD2410 and ESP32 C3 super mini from Aliexpress.
Small case for the ESP32 and LD2450 with mounts for 2 * 6x3 magnets. Prints without supports. I use this to hang it below my monitor and integrate presence detection in Home Assistant. Designed in OnShape, link here .
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…
Yep. It holds an ath20 board, a panasonic PIR, an mmwave radar, and an esp32 of the 38-pin flavor.
For best result PETG or better, 6 layers top and bottom, 6 walls, infill 35%+ cubic. No support needed. orientation as in the photo with these parameters, it will withstand a direct hit from a ball, 1.7 J. I haven't tested higher. You…
The borders on the cutout part might be a bit thin. I did my best, so consider this a proof of concept . Modifications made using Tinkercad.
A wall mount radar presence sensor with a LD2410C that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). BOM: D1 mini ESP32 with…
WORK in progress Hello, I designed a Case for the mmWaveRadar-sensor HLK-LD2410C-P from Hilink. It's a first version, more a tryout. The sensor is the version with 2.54mm pinout. It's the “friendly” one. You can better solder it, as the…
Case for ESP32 C3 Super Mini and LD2450 with USB C Connector. Backplate snaps in place. added an inlay for the case as the red led shines through white filament 2025/07/04: added ceiling mount, requires 1x m3s threaded bushing
This is a bracket to mount the Andonstar AD246 or AD249 digital microscope to an InnoGear Microphone articulating arm which has a 3/8 threaded fixing point. I have included the step file in case anyone wants to do a mod. Link to the…
Rectanglar case with snap fit lid and visible sensors
I have designed and printed these cases for personal use in PETG. It can be panned and tilted and has a cutout for the USB cable. Software in my case is ESPHome connected to Home Assistant
This is a remix of the presence sensor originally designed by @FSquare_1622667. I made a few tweaks to suit my needs: Replaced the original screws and inserts with plastic screws (I didn’t have the metal ones at home). Thinned the walls…
Slim protective case for the LD2420 24Ghz mmWave Radar Human Presence Sensor like the Hi-Link HLK-LD2420 from AliExpress Similar to my other display screen and ESP32 cases, this provide a minimal case with easy access to the pins for…
Box for ESP32-S2 equipped with an LD2410C sensor. Printed with PLA, at 0.4mm, no supports. DIY Project: https://www.nlion.fr/nicolas-lion-informatique-ancenis/2024/02/25/ld2410c/ Category: DIY
Please comment, rate, and post a make! A simple case for using an LD2410C radar sensors with an ESP32 C3 Mini that can be mounted to the HSW. I've included a little spacer that can be slid over the pins of the LD2410C to help with…
Additional Material 5x M5 Nuts (self securing) 4x M4 Screws 12mm (Monitor Side) 4x M5 Screws 12mm (Vesa Side) 1x DIN 912 M5 30mm (Connecting the two Parts) Washers optional Design inspired by https://www.thingiverse.com/thing:4161847 The…
To print the cover with the logo in two colors change the filament to a different color at layer 4 and 6.
A series of mounting brackets for a LD2410 motion detector, one for the LD2410B and two for the LD2410C for the LD2410B and LD2410C there is a wall mount, i use it to mount te sensor flush against the wall to person detect on the other…
Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…
Slight remix of the original model by Prashant Sinha . For instructions please see the original model . The only differences are that this model is adapted to use M2 screws, the original model requires M2.5 which I did not have available.…
Broke your original rear suspension T-bar and don't want to wait weeks for spare parts to arrive? This is a 3D-printable replacement designed to get your micro drift chassis back sideways immediately. V3 is Out Now Important Notes &…
---- new model without battery ----- In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new…
Read my article about this project: https://www.strangeplanet.fr/devlog/posts/2025/03/mmwave-presence-sensor/ The case is mounted on a orientable ball. To assemble the ball to the case body you will need a 20mm M3 screw and a threaded…
Same size as the original, just added a mounting-option and changes vent holes.
Spare part clip lock Philips Cucina Sandwich maker HD2430 replacement.
I designed a small enclosure for the HLK-LD2410B-P mmWave sensor bord for use in Home Assistant. More details can be found at https://github.com/jonnybergdahl/Sensor_LD2410B . I have included the Fusion 360 file so you can remix it as…
Case for ESP32 and LD2410C MMwave sensor. Fits LD2410C and ESP32 with dupont connectors. Use double sided tape or hotglue to mount ESP32. Use M3 25mm for base and lid x2 M3 16mm for arm. x3
Hi there, Sharing my little bathroom mirror project, specifically the part with a housing for LD2410 mmWave sensor which then connects to a d1mini controller with ESPHome for automated bathroom mirror ledstrip control. Features easy…
Rectanglar case with snap fit lid and visible sensors
Enclosure for a DF Robot Beetle ESP32-C6 and a LD2410C. The enclosure is a tight fit for the C6 but it fits nicely. You may need to push the USBC male connector from the C6 into the enclosure's USB hole from the outside once or twice at…
Most of models I've found assume that there should be some MCU (ESP32 or ESP8266 D1 Mini) used along with it. But as B and C models can use BLE along with Home Assistant. I've decided to place them along my home in that configuration.
Simple case for the sensor LD2420. onshape link: https://cad.onshape.com/documents/7fe9b2202ecb885bffb6e2a3/w/aa93626d576c4e4043e3f4c7/e/48be5b06ba6e0a77ca0ae2fc?renderMode=0&uiState=66ef622f6caf30072eaf8ffb
Hlubší krabička pro ESP8266 (D1 Mini) se senzorem přítomnosti HLK-LD2410C. Krabička je hluboká pro použití s DUPONT konektory. STL a STEP soubor ke stažení. ---------- Deeper box for ESP8266 (D1 Mini) with HLK-LD2410C presence sensor. The…
Fits a Lolin D1 "Mimi" v4 with USB-C and LD2410.
Please comment, rate, and post a make! A simple case for using an LD2410C radar sensors with an ESP32 S2 Mini that can be mounted to the HSW. I've included a little spacer that can be slid over the pins of the LD2410C to help with…
Case to make a presence sensor with an ESP32 NodeMCU32s and an LD2450 mmWave sensor, the lid also has holes to glue 9x3mm neodymium magnets. The ESP32 and LD2450 should not require any glue and should stay in place once the lid is screwed…
Designed this alternative wall mount for the LD2450, as I wanted to mount the sensor flush against the wall using tape. Remixed this remote wall mount for this use case (the design is a bit rough, so I attached the Fusion360 file if…
Brackets to mount a Creative Stage Air speaker on a Vizio D24f-G1 TV using the feet mount holes when it is hung on the wall with a VESA mount. Includes retainer clips to hold the speaker from sliding out the end. To attach, mount one…
Aquara inspired simple case for the ESP32-C3 Super Mini with the LD2410C directly attached as in this model. Use paint on support on the USB-Connect surface and the “lock” surface. The holes can be used to “lock” the lid with filament…
Slot-in construction for the LD2410B (should also work with the non-B model) module so that you can put it onto some metal base (space for a disc-magnet 6x2mm in the bottom part). Detection works through the printed material. No further…
This is a stand for the LD2410B mmwave sensor. Just put the sensor in the gap and then secure it in place with a piece of filament through the hole and into the base. Trim either to the face for neatness or leave proud if you are planning…
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ Introducing the Remote and Light Switch Holder for the Andonstar AD249 Microscope ! This custom-designed holder solves the issue of a cluttered workspace by providing a dedicated place for your microscope's remote…
Wanted a small case with presence and illuminance sensors with the use of Wemos D1 mini ESP8266. Inspired by : MMwave Multi Sensor fixtSE LD2450 by F-Square | Download free STL model | Printables.com Using the joint , nut and foot form…
Housing made for ESP32. There no mounting holes for the esp32 because the esp32c3 versions from Seeed doesn't have mounting holes zo i fix them in place with a little hot glue. My first remixing a model without any experience.
Heavily inspired by Yoram van de Velde's Case and mount for LD2450 and ESP32 C3 Super Mini I remade everything in Solidworks. Features: Houses ESP32-C3 Super Mini/Pro Mini & LD2410C/LD2450 mmWave Sensor Designed to be wall mounted or…
See description in the main model https://www.printables.com/model/1020388-esp32-d1-mini-ld2420-24ghz-mmwave-radar-sensor-esp Difference : ESP32 S2 mini used and the radar LD2410
I needed an LD2410 case for the Raspberry Pi Pico W. Since I liked this one the most, I reverse-engineered it in Fusion 360 so that I could easily modify it to fit the Pico W. I wanted to share the original files as well, as someone might…
These parametric legs should work for any Vizio D series television, but was specifically designed for and tested on a 24" Vizio D24 whose mounting cavity is slightly smaller than other D series TVs. The f3d file is deigned to be…
I wanted to use a more common micro drift servo in my HPI Stage D24 - but the factory mounting pattern doesn't work. This file will get you adapted between the two. V1 was the original prototype. Slightly larger footprint, more mounting…
Cover per ld2410c e d1 mini.
Presence sensor for use in Home Automation Parts used: ESP12E (ESP8266) with breakout board, 26x38mm HLK2410c 24G radar sensor, 22x16mm. BME280 Temp, pressure and humidity sensor, 15x12mm WS2812 LED, x4 pixels, 10x32mm. Notes: All parts…
Holder for LD2410 with Wemos D1 Mini for IKEA Skadis Boards. The Case can be turned to left and right by 50° Parts needed: LD2410B Wemos D1 Mini M3x35mm + M3 Nut or M3x30mm + M3 heat set insert 4x 3x12mm self-tapping screws Print Settings…
all D and F series parts are compatible
I recreated the STL files in Fusion 360 and modified them for the Raspberry Pi Pico W. Additionally, the logo is now suitable for multi-material prints. With the type settings in PrusaSlicer, it can now be printed in any configuration.…
In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new device to add in your Home Assistant…
A simple 30º tilted Runcam 3 mount for the Puda D240 frame, which is a clone of the Xhover Stingy. 2 Versions, one with 2.5mm thickness for optimal camera protection, the other with 1.5mm general thickness for lighter weight, images show…
This is the housing case for the LD2450 24GHz radar presence sensor with chinese cloned Wemos D1 Mini. There's no need any crew, all are snap-in.
I built my own 100 W power bank around the popular MYZL-YD24-V2.32 board ("100W 5S Flash Charge Mobile Power Circuit Board") and designed this case for it. The case is only 97 × 23 mm in footprint: five 18650 cells stand side by side in a…
Remix of loopj's design. It's a bodge remix, could use some better modelling but good enough for my needs. When printing, use Gyoid infill pattern for better diffusion of light. TinkerCAD available at…
Caja con alimentación USB directa para ld2410c. Dos tamaños, según interese orientación del sensor. Para conectores use terminales macho y hembra dupont. Puede conectarse directamente a un puerto USB o, como yo, a un switch wifi para…
MK2 ring light for my digital microscope. I have evolved the MK1 design into a better more robust ring light, the screws that are used to hold on the lens cover now serve as duel purpose to attach the ring light. The bottom section is…
Small spoiler made for the hpi stage d24. Super simple design. Just printed at 100% infill and bent the ends of the wing down before gluing the wing together with super glue. Used hot glue to secure it to the car as to not mess up the…
This is a complete chasis and wall mount for presence sensor LD2410 soldered directly to ESP32 C3. To solder LD2410 to ESP32-C3 Super Mini - just remove middle pin from the sensor (digital out - not needed as UART communication is used).…
Angled case for Cospad XD24 PCB. It is secured with regular PC case screws
I needed a way to attach my monitor to vesa mount. You will need some nuts and screws to attach it.
Camera holder for directly mounting a Hikvision cube camera to your creality ender 3 v3 ke or similar. With the Hikvision camera you can monitor your prints easily, and what is also a very nice feature is that these camera's can make…
D24 S-Hook, A-Symmetrical. Designed for hanging jackets or other things on a rail.
