Liczymy pasujące modele…
My wife wanted to be able to store multiple lids between dividers so I increased the space between dividers, increased overall length, and added some octagons in the dividers to reduce filament usage. Total length of print is just over…
Inspired by the Expanded Sensory Fidget Star, this piece reimagines the idea as a crisp spider-web for Halloween. It comes in three sizes—Large, Medium, and Small—with a detachable icon at the top. The icon is not just for show; the model…
Designed for Makita DHP482 drill and DTD152 impact driver. Will probably fit many other Makita tools and others, 64mm inside diameter. Added several more sizes to fit bigger tools: 68mm, 72mm, 76mm. Added a 72mm “square” holder to…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
Fractional Gridfinity with expanded bases and bins. This is a simple expanded version of the original creation. I needed wider and taller bases and bins so I made this remix. The author of the original design mentioned they'll be…
Update (24/01/24): Remodel that uses staged holes to fit different sized ampoules more snugly for a cleaner break, and the top has been repurposed for discarding. Keyring hole has been moved so that it sits better on a keyring, and the…
------------------- Sept 2026 Update ----------------------- Following some helpful feedback, the original models have been marked as "DEPRECATED". The updated versions have an improved fit, and should hold the batteries more securely…
My cats were having difficulty getting their treats out of the original D20, even after scraping away some of the material with a knife, so my completely unskilled self brought the original into TinkerCad, sized it up by 20%, and expanded…
Post a make if you print! I would love to see it. Changelog 9th June 2024 - Added more room on the inside for the eye terminals and the cables to loop around in as a comment stated they couldn't get theirs to fit. 8th June 2024 - Added…
UPDATE 2/16/2025 - Added an expanded version of the non-holiday container without snowflakes. This is a expanded version of JamesThePrinter's Mechanically Locking Gift Card Box to hold larger gift cards. Interior dimensions are 130.6mm x…
Crochet blocking board for blocking out granny squares, Afghan squares and other small knits like hats, booties, etc. My wife requested a larger version of the original board so I expanded it to be 10 x 10. I also modified the pegs to be…
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me…
Modified gridfinity caliper holder specifically for Mastercraft digital caliper, with thickness gauge, deburring tool and battery holder.
I am seriously bothered from lacking voltmeters in blasters, especially in blasters with low capacity batteries like the nightingale. I couldnt find a file for a frame and didnt want to cut the shell so i modeled a new battery door with a…
Modified the back of the T-Lora Pager to allow for a larger battery. The extra unused antenna “wing” was also removed. *Note* This is a fairly involved teardown and rebuild of the T-Lora Pager and you do so at your own risk. Refer to the…
The Creality K1 printer has easy-to-use slots around the exhaust fan, allowing snap-on filters to be attached. There has been some discussion of restricting air flow if a filter is placed directly over the exhaust fan, this design…
A wider version of the “Diamond Art Drill Sorter” to accommodate the wide packets of dots in the kits sold at Walmart.
Separate files for the AV-2011 UHF SATCOM antenna and the VHF LOS antennas. Used 24 gague beading wire for the reflector and 20 gauge for the directors on the AV-2011
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls, looks "good", isn't too chunky, & prints FDM as one piece w/ no supports. So I made my own. These walkways (or bridges) are…
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
This is a remix of the AD5X tool holder that combines elements from the original model and related remixes, with the goal of making the layout more flexible and less tied to one specific glue size or tool arrangement. The main changes…
Read the excellent description and see the images of @TShelley's original, the logic of this works the same and the minis are stored exactly as he describes. Leave @TShelley and @PengLord a like for their excellent originals.
Remix of @unrepentantgeek's Gridfinity Deep 1x1 Bin. Alternate Sizes (all with 12mm label): 1x2, with a flat bottom as well as a scalloped bottom version for extra storage space. 2x2, with a flat bottom as well as a scalloped bottom…
This is combination of remixed and original files. This box holds 50 filament samples. The box and lid have been extended to fit all 50 samples. The insert was inspired by the insert by Kaksu3D but modeled from scratch by me. To assemble…
Updates 17-05-2025: I've added a “Large” version of each of the top jaws, which have a more prominent grip ledge to grasp when actuating the jaws. (Shoutout to @Charly_Brown for this one) 25-04-2025: I added a few variants of the base.…
The default solution works pretty well, but occasionally I had prime pellets bounce out of the bin due to the distance of the fall. As someone who is an obsessive neat freak this was not acceptable. I then proceeded to modify the original…
Remix of XYZ.Thought's nice caddy to make it slightly wider, add a base with some drainage, and stretched the handle designed for convenient carrying of batteries and accessories to the work site. This model is not perfect but functional.…
Holds the following number of batteries: 38 AAA 42 AA 10 9v 8 C 6 D Can be wall mounted with 4 screws if wanted. No Supports Needed Print With: 3 Perimeters 5 Top Layers 15% Infill
Playing with design Ideas, thought I'd share. Enjoy
This battery cover was designed with an internal width of 29mm, a length of 106mm and an height of 23mm, which, combined with the 12,75mm of height of the original battery compartment arrives to 35,75mm, so it holds comfortably a 1000mAh…
DE: Vorteile dieser Version: Eine Druckplatte mehr Stauraum. Auch für sehr große Druckplatten geeignet: 270mm x 330mm Breite 280mm x 330mm Tiefe z.B: Anycubic Vyper Elegoo Neptune Creality K1 Max & Ender 3/7 Sidewinder X1/X2 QIDI X…
The Clip Mania Battery Door is a 3D-printed alternative to the stock battery door included with the X-Shot Insanity Motorized Clip Mania. Featuring a chunky aesthetic with a stylized "X," this battery cover allows the use of…
I wanted to replace my low profile wall mounted contact holder, that only holds a weeks worth of contacts with something that could hold a lot more, so I found the largest holder and made it bigger. From the bigger version I made 3 types…
Since the thigh pad is shaded by the rest of the holster and the gun most of the time, I just print these out of PLA.
Dust port expander for the Parkside (lidl) belt sander. It was specifically designed to fit a Nilfisk rubber nozzle but may fit similar. The port opening is 36mm across with a slight taper. This does require support. I found it worked…
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
These Stryfe Expanded Battery doors are alternative battery covers for modded Nerf Stryfe flywheel blasters. Available in two sizes, this part is a perfect companion to use with 3S LiPos up to 1100mAh. The Modulus Stryfe requires a small…
My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…
I noticed that the official STEP file for the BigTreeTech HDMI5 V1.2 had some inaccuracies, and was just the board, making it difficult to model based off of it. I did my best to finish the rest of the model and fix the inaccuracies I was…
For the 2W, adds a column of half-grid For the 3W, adds a 6x6. Note that the walls on either side are thinner to fit this. A stock 3W blank decor drawer is also included. Uploading as STEP-only. PrusaSlicer and friends seem to have no…
I recently added the extended shelf and leg to my Shaper Origin Station. I already had a larger shelf with dog holes which I wanted to use as well. Rather than going through the bother or transferring the leg connector to the other shelf…
Make 28mm Scale ships for all you RPG needs. The "Blimp" part can be tied to the "Upper Deck" part to make it appear more realistic and secure. The mast can hold a cloth for a sail. UPDATE 10/17/17: Added rotating "Wing" piece to be…
Useful if you're using an HBA and wind up with a lot of extra sata connectors. Also gives you some flash redundancy over that one 2.5 bracket that comes with the case. Hangs off of the SFX PSU and sticks to the top of the internal space.…
I switcht from the Caddx Ant to the Caddx Baby Ratel 2 and its a bit longer so i had to modify the design
I own a LG GML844PZKZ fridge. The files provided are for that model number. I suspect, that there are other versions with only small differences (ice maker etc. - using the GML844 designator) that those files would work with too. If you…
i could not fit my lipo battery. in the original buffer tube battery stock so i designed this. enjoy:)
scouts woggle recommend using supports
added 3,5x5
The switch that I had was too large for the original model by PackratArt , so I expanded its cutout a bit and moved to the side.
Print in 0.15 mm layer height 0.2m starting layer, snug supports
Release from my Patreon exclusive files This is an expanded moor cover for the Dart Zone/Adventure Force Spectrum blaster. It is designed to be a slightly loose fit to compensate for painted blasters. Print flat to bed with no supports.…
Can be used with Valerie's mounting arm for stock SV08 A/B motor mounts or Igiannakas's mounting arm for more traditional v2.4/Trident extrusion mounting. Adapter bracket needs 6x heat set inserts. Glue tinfoil inside the bin to prevent…
Remix of Headphone hanger by Danielpohl - expanded the headband resting platform from 34mm to 47mm
I had a hard time finding a way to carry a little extra cash. I expanded the opening to make it easier to get cash in the wallet.
Pikocore Breakout box, flying wire/deadbug/breakout etc. single pass a bit rough, but it works for 24mm arcade buttons. they are a tiny bit loose i used hot glue to stop them spinning. i made a carrier pcb for the leds out of vero/strip…
The original creator and I take no responsibility for the use of this 3D Print always use good judgment when using legal fireworks in your area.
The original Pixel 6a by @Engine_Jam_588019 was just what I was looking for but I was concerned about the microphone hole being largely blocked. I used PrusaSlicer's negative volume feature to expand the opening a bit. Printed in…
The Vesper Expanded Battery Door is a 3D-printed alternative to the stock battery door included with the Hare Tech Vesper Brushless Flywheel Blaster. Featuring a sleek faux-cheek-rest styling buttplate, this battery cover accommodates…
This a dust port expansion for the Ryobi 18v R18ROS. It replaces the standard port that comes with it. It was specifically designed to fit a Nilfisk rubber nozzle but may fit similar. The port opening is 36mm across with a slight taper.…
I liked LeDank's side cover and wanted to add some LED's to it. I made the cover just a bit more square, so the LED's could hang slightly lower. There's also more room in the top left corner to hide a buck converter. The second pictures…
The original project's tray is great - compact, good use of space. It didn't store the ships or the ambassadors. This project also removed the special space set aside for the cardboard starbases - if you're still using those, they can be…
I was asked for a stand for an antenna at 11" high that looked like an expanded hollow-point bullet and this is my novice attempt. Not modeled after any specific round. Print it either single or multi; not sure which wastes more filament:…
This is an expanded version of The Socket Pal by TheTinkerGuy. The original version sizing was a little off for the socket set I owned, plus I had both a 3/8 inch drive and 1/4 drive metric socket set that I wanted to put together. This…
This is a remix and expansion of the fantastic OpenSCAD braille module posted by Sean Tikkun and drayde. The additional characters allow for complete braille transcription. Here's the text from jaqtikkun’s original posting: "DO NOT SCALE!…
A battery door for bigger batteries! There is a version with text and a blank version. Takes an M3x25 thumbscrew
I wanted to make a more rectangular planter for lettuce growing in my basement. Upon researching the type of planters needed for things like lettuce it said that they have shallow wide root systems. To try and accommodate this I made my…
18650 battery case DIY can be spliced expanded I used battery contacts set https://www.sigmanortec.ro/set-contacte-baterie-aa-plata-plus-arc
Smart Desk Organizer XL – Expanded Storage for Medication & Gadgets Keep your space organized with this expanded version of the smart desk organizer. It offers more storage for medication, small gadgets, and daily essentials. Perfect for…
Use if you want a quick fix for the existing model for the latest release with the trader expansion!
Finally solved one of the most annoying problems in my truck. I designed this cup holder extension in Tinkercad specifically for my 2015 GMC Sierra to handle what the stock holder couldn’t—larger coffee cups and big water bottles. This…
Measured base plate model and an expanded version. I included dxf files and stls to make the parts.
This is a replacement coin rail for the WACCA rhythm game arcade cabinet to allow for coins larger than the 100 yen coin to pass through. Print the model with the flat side with the screw holes against the build plate. To install this…
Added some shelfs for more size range and holes for screws
This shower caddy is designed to expand your vertical storage space without adding clutter. With a footprint of 200 × 80 mm , it provides a stable platform for bottles, soaps, and accessories while keeping everything within easy reach. To…
Remix of monster deck storage system created by TetsuBo. Modified to work without initiative indicators (Gloom/JoTL)
print with 3 walls and 15% infill
No longer a 'slim wallet', i just yoinked the basket off of another model Print all parts upright and with 0.2mm
Only two connector types to make this shape. The subunit on the larger angle of the rhombus is marked with a dot on the inside. https://en.wikipedia.org/wiki/Expanded_icosidodecahedron
Here 's my Onhape document. There's a version with and without the antenna mount.
Quoridor 4-Player, Expanded Board 🧩 Take the classic Quoridor game to the next level! This 3D-printable version comes with an expanded board and 4-player pieces , giving you more space and flexibility while keeping all the fun of the…
Insert to store everything from the Expanded Campaign pledge in one box, including Kaerun Hero and Abbadon (day one gift). I got the all-in box thinking it was made to store everything and not the extras on one box, it makes the box…
The red box is the original size, the black one is the remixed, extended versions. It uses the same lid, as you can see on the picture.
Allows for the use of longer LIPO batteries in the MHP Moose Vector Blaster, as the battery compartment in the blaster is extremely small, thus requiring the use of small LIPO batteries. This expanded battery door allows for the use of…
Significantly larger purge/poop bucket designed for ZeroG Mercury 1.1 - otherwise known as a "Beefy Boy" purge bucket. Please reference original ZeroG Poop Bucket - for other parts (mount & brush holder). It has also been modified…
The Dart Zone Pro MK-3 Extended Battery Door is a 3D-printed upgrade to increase the capacity of the DZP's battery compartment. Featuring a minimalist aesthetic, this battery door looks and feels like it belongs on the blaster, giving…
I had to extend the size of the beam for it to fit snug Print Settings Rafts: No Supports: No **Resolution:** 300 Infill: 20 **Filament:** Prusament PETG Galaxy Black Category: 3D Printer Accessories
The shape and dimensions of the expanded actions player board in Agemonia. Useful for cutting out shapes in organizer projects. Please note that the additional hero Garuk has a slightly off-sized board, so this will not fit their card.
Adds about 14mm of space to the already ginormous Protean Battery stock. You will need a m3x25 screw.
1 mm expansion around the end peice to give a cap to the light
Allows for the use of longer LIPO batteries in the MHP Moose Vector Blaster, as the battery compartment in the blaster is extremely small, thus requiring the use of small LIPO batteries. This expanded battery door allows for the use of…
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls, looks "good", isn't too chunky, & prints FDM as one piece w/ no supports. So I made my own. These walkways (or bridges) are…
Remix of XYZ.Thought's nice caddy to make it slightly wider, add a base with some drainage, and stretched the handle designed for convenient carrying of batteries and accessories to the work site. This model is not perfect but functional.…
This is a remix of the AD5X tool holder that combines elements from the original model and related remixes, with the goal of making the layout more flexible and less tied to one specific glue size or tool arrangement. The main changes…
The Vesper Expanded Battery Door is a 3D-printed alternative to the stock battery door included with the Hare Tech Vesper Brushless Flywheel Blaster. Featuring a sleek faux-cheek-rest styling buttplate, this battery cover accommodates…
These Stryfe Expanded Battery doors are alternative battery covers for modded Nerf Stryfe flywheel blasters. Available in two sizes, this part is a perfect companion to use with 3S LiPos up to 1100mAh. The Modulus Stryfe requires a small…
Finally solved one of the most annoying problems in my truck. I designed this cup holder extension in Tinkercad specifically for my 2015 GMC Sierra to handle what the stock holder couldn’t—larger coffee cups and big water bottles. This…
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me…
Works with the original body, but now accepts slightly taller 18650 cells with the button tops.
This is a remixed of https://www.printables.com/model/274723-nozzle-holder. Thought it would be nice to add a base so that it is stackable. The nozzle spacing were a bit sparse, so I added an additional row to hold more nozzles.
