Liczymy pasujące modele…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
This is a modification to the original ender 3 (not v2) to allow for it to mount the Stealthburner fan shroud created by the Voron team. It also comes with a small adapter to be able to mount an LGX Lite as its extruder. With how the…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths). Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position.…
In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…
I wanted to use LGX Lite Extruder FDM case model by SIVIS, but I couldn't sand down the shaft. Therefore, I made a hole to allow the latch to move freely. rotation_distance 53.494165 gear_ratio 44:10, 37:17 Re-calibrate your own value for…
Please refer to the main entry for complete descriptions and credits. The list of AGx holders were split out from the main entry to facilitate search and download. The holders here are labelled with AGx. If you prefer holders with LRxx…
In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
As there were no available mods to fit sb2040 with lgx lite I modified the standard stealthburner body and LGX Lite mount to fit together. Inspired by standard Stealthburner https://github.com/VoronDesign/Voron-Stealthburner and lgx lite…
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
Mainly used as a replacement for a missing cap on the GX16 connector on my electric scooter. You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight. Print…
I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…
Die einfachste Methode einen HGX Extruder mit einem Stealthburner zu verheiraten. Der Adapter von djos_1475 ist sehr simpler Adapter um einen Orbiter Extruder mit einem Stealthburner zu betreiben. Der HGX (billigkopie eines LGX) hat…
Update: 09.06.24. Installation guide added. Update: Also see my new Libra & Trigger Extruders that uses Orbiter internals. By popular request, new threaded insert mounting version. Also see original version here:…
''RGX11 melee Valorant'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot
Overview: This Voron modification to the Stealthburner option supports the Bondtech LGX Lite extruder, ERCF Filament Sensor, and the Hartk 2 Piece Toolhead PCB. I purchased the Bondtech LGX Lite extruder hoping that it would provide a…
This is a toolhead spacer with strain relief for the Voron V0.1 that makes the Bondtech LGX Lite extruder mod work together with the Umbilical PCB mod by timmit99 . BOM Qty Description Sourcing 4 M3x6 BHCS Aliexpress 2 M3x30 BHCS…
CC BY-NC-SA license: https://creativecommons.org/licenses/by-nc-sa/4.0/ These designs, and devices built from such, are experimental. While some minimal testing has been performed, they are provided as-is with no guarantees whatsoever.…
Inspired on Victron Lynx - Rpi + 5" Touchscreen enclosure by RobrechtDR. But I had a lot of problems importing the STL into Sketchup, so I started again with the original Victron files.
this is a mash up between a few different lgx lite mounts as well as the filametrix toolhead knife to allow for cutting of filament rather than tuning tips. i realised i would need this when tuning pla tips on a high flow hotend like the…
1:1 Model of the Nvidia DGX Spark, using this for making stands for stacking the spark. Wasn't able to get the cheese grader texture on the front, but it is flat with the sides, so take that into consideration if using this for a…
Nice feature No need to disassemble the wire harness to install this gland. Bill of Materials Category Qty Description Notes Hardware 3 M3 heat insert Voron BOM Hardware 2 M3x10 SHCS
Replacement clip for a Gatorade GX water bottle. Prints quickly and with no supports.
I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…
I'm working on a stealtchanger and wanted to intergrate a filamentsensor in the toolhead, additionally you will need a 5,5mm steel ball, 2x m3x35mm bolts and a D2F-L microswitch
Mount for HGX extruder with 43.5mm mount holes spacing
Case and spot welder holder. The cover has button extensions included.
Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…
Voron 0.2 mini stealthburner cowling for LGX light extruder there are files for the standard strain reliever and for the tool head pcb
This is a cooling housing for DGX Spark and related AB10 AI supercomputers. It extracts air from the rear vent while maintaining access to ports. It fits in a 3U rack space, takes a 120 x 120 x 25 mm fan, and has rails for a 140 x 140 mm…
Update: Also see my new Libra & Trigger Extruders that use Orbiter internals. There is now a threaded insert mount version in addition to this one, see link:…
Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.
Original Bambulab hotend & CR touch z probe version. There is also BIQU Microprobe & E3D Revo CR remix versions now. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic…
Simple mount for the orin to attach to any other objects. Will require longer bolts than those removed from base. There is no reason StereoLabs should sell a mount for 300$.
This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…
This is a functional 2 Node Cluster cooling duct for GB10 AI super-computers like the Nvidia DGX Spark, ASUS Ascent GX10, Dell Pro Max, Gigabyte AI TOP Atom, HP ZGX Nano, MSI EdgeXpert, and ThinkStation PGX. It fits in a 3U rack space,…
This is a solid Model of the Lgx lite extruder. The model comes from the bondtech's websight but I converted the file from .step to .obj to save others some time if they want to to a quick & dirty mock-up for there printer Category: 3D…
Mixing using EBB36 and LGX lite with cable chain hook.
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…
I realy like the design of the ProtoXtruder HGX and just gave it an additional brace on one motor mount. Its almost no added weigth but stiffens the arm a fair bit. Remix of the great work of @nhchiu:…
A mod focused on fitting all hardware of LGX Lite extruder, BTT EBB36 (V1.2) board and umbilical PG7 mount in one fully enclosed and ventilated case. Used parts of toolhead from: - Eytecz's LGX Lite mount - Voron's repo including…
A mod for Voron Stealthburner LGX lite ERCF EBB cover. For those user that using BTT EBB36 v1.1 or v1.0 CanBUS board. Hardware BOM: Qty: 2, M3x30
As I really loved the E3D Revo hotend on my Ender and they recently came with a High Flow version, I decided to make a conversion kit for the V400. I admit, it is not cheap and it does not print much better than a Volcano, but it is very…
This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it. If you are using the LGX Lite mount…
This is a mount with strain relief to use the Bigtreetech EBB36 toolhead PCB with an LGX Lite extruder on an EVA 3.x carriage platform . This is a remix of the mount for the Orbiter 2.0 extruder by Iatraliptes . I recommend using a USB…
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
This is Stealthburner with HGX extrude gear MOD.
The original mount did not work for me so I designed this one which works great on mine. The original mod is here: https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 Needs to be printed with supports.
Updated CAD below. A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with an m16x1 thread to secure it on the port. Tested on a Bambu Labs P1S at 0.08mm layer height for maximum qualityyyyyy. If you…
Modified OGX-Mini Case to fit Raspberry Pi Pico instead of a RP2040-Zero. Good for both of projects: https://github.com/wiredopposite/OGX-Mini https://github.com/sonik-br/lgff_wheel_adapter USB A port:…
4 endcaps for Nema 17 sized stepper motors, allowing the use of GX12 (12mm diameter) locking circular multi pin connectors. More robust than the usual 6 pin JST connector or straight wires coming from the coils, both of which are prone to…
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
This is my current setup for my Ender 3 V2. It has: TZ E3 hotend HGX Lite extruder Satana shroud 5015 fan BL touch I designed the Extruder mount/adapter plate and modified the Satsana to fit the TZ hotend Category: 3D Printer Extruders
use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main
Please, print them in ABS, 4 walls and 40% infill. You don't need to change the orientation of the parts.
Used bear upgrade files for prusa i3,edited it to fit on ender 3 x axis plate and added mount for HGX light and ORBITER 2.0 extruder. All printed with 0.2 layer hight. use ABS or PET-g Nuts and bolts needed: 3 x m3 square nut (2 extruder…
FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch) Description: Upgrade your Ender 3 V2 with this versatile direct drive bracket. Compatible with Sherpa Mini, HGX…
I needed a way to mount the Stealthburner with an original Bondtech LGX to my CR10 S5. I found this Afterburner adapter on thingiverse and remixed it to fit my needs ( https://www.thingiverse.com/thing:4638150 ). The LGX adapter came from…
Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…
I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…
i want to have the Bondtech LGX Lite on my V400, so a did a design and make it on my V400 now already is on my Printer and works great i am share it to other people who want the Bondtech LGX Lite on his or hers V400 Printer they are free…
This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…
Update: 13\10\24 I have uploaded a Knomi V2 version. The V2 version is the same for both Generic & EVA3 mounts. 1. Due to the increased diameter of the V2 mount I have modified the EVA3 LGX Lite mount very slightly to accommodate. This…
Print standing on the face plate. Printed with ABS, but I assume PETG should be fine as well Attach the backing plate using 2mm self tapping screws .
Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…
Updated the design to work with the “twirl” version of the HGX gears. Support is needed for the pocket that the motor sits in. Print quality is on par with Galileo 2 or better Twirl gear:…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight.
Direct drive mod for the Anycubic Kobra Max using the Bondtech LGX Lite extruder (https://www.bondtech.se/product/lgx-lite-large-gears-extruder/). This mod aims to be as simple as possible, keeping the original hotend case and the…
Simple Sensor that allows you to detect filament entering the LGX-lite extruder. Useful when you are using a tool changer (Specifically the ERCF/ERCFv2 to detect the distance from the changer to the extruder. It is also extremely useful…
Mount for Mellow SHT-36 v3 on Bondtech LGX lite
Aufputzadapter für Victron GX Touch 70 Display, damit das Display direkt an eine Wand montiert werden kann, inkl. Auslass für das Kabel unten. Mit Fusion 360 erstellt, bei Bedarf kann die Datei verändert werden, damit z.B. das Kabel an…
Mounts a EBB36 toolboard to the back of a LGX Lite extruder. Use 18mm standoffs to position the mount directly behind the LGX Lite motor. When paired with 18mm standoffs, the mount will not touch the LGX Lite motor. Note: this mount does…
Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile Parts Needed: M12x1,5 Strain Relief 2x M3x25 4x M3x30 2x M3 Inserts Location:
Vase - Kangxi period (1662-1722) Fixed lack of bottom -and lack of hole at top. Mangled mesh from p-gam. hollowed. Added UV details.
Heres an OGX-Mini case I designed. You'll need a RP2040-Zero and a Female USB Type A Breakout board. I have included a picture of the one I used, I assume its a fairly common one! The main Github for the software is here:…
This is a 1:270 model of a GX1 Short Hauler. The wings on either side are print-in-place and can rotate up and down. The model is 138.1mm long, 66.4mm wide and 39.2mm tall. It has a hole compatible with a big pin and base from here .…
Portable DGX Spark stand for stacking 2. Reversible direction with airflow.
Update 6/30/23. Added an experimental and untested version meant to be compatible with the Ender 3 V2 Neo. The holes relating to the extruder motor are moved 21mm to the side. Let me know if it works! Update 7/7/22. Added a beefier mount…
Wife uses a 40oz Stanley cup that is very top heavy and moves around way too much in the car. The stock GX cupholder is an ellipse shape that relies on 3 spring loaded detents to keep drinks stable. Those detents work well for light…
I recently switched to an LGX Lite extruder on my Voron. Since i use an EBB36 v1.2 i've remixed the door and mount for the EBB36 to have i fit nice and sit tightly on the SB. This way you can still use the door, have everything tucked…
This lets you run a Voron Stealthburner + a Bondtech LGX Lite + a KNOMI + and EBB 2209/2240 I have it up and running on my printer so it's tested, sample size 1.
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…
Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament. Removed the e3d fastener in the bottom, removed the old AB ducts,…
This STL was supplied to me by Bondtech since it is not available on the site, and the Bondtech SHORTCUT mosquitoExtruder/hotend Accessory Pack has not been available in the US for some reason. Also, the fan shroud is not sold separately…
Camera cage for the Lumix GX80 / GX85 camera. I designed the cage because the cages for GX80, which is still a good camera, are no longer available on the market. The cage contains a number of 1/4" and 3/8" UNC camera threads, known as…
If you have an original version of the strain relief, check out the reliability update at the end of the description. It is a quick and easy fix. When this project started, I wanted a CAN bus conversion for my Voron 2.4R2 but did not see…
Simple filament sensor for the HGX-Lite. Requires the following parts: Switch: D2F-01F3L-D3 2 - M2x10 self tapping screws 1 - ECAS fitting with bottom plastic/rubber removed 1 - M3x6 Screw I recommend these switches as they have fairly…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Required: PTFE Tube (Goes between V6 and Extruder) M3…
Replaces EVA 3.0 Cable Guide with a Fly SHT 42 / EBB 42 mount that also contains a minimalistic cable guide. It can be attached to the EVA 3.0 using the 3 screws same as the original Cable Guide, and for added support (or as an…
Remix of the Mantis toolhead to keep some of the features I liked from the SB
April 2025 we made an update to Spartacus Family and we have moved the LED to the front of the toolhead and we have increased the part cooling ducts. we have bigger vents that flow much better than the previous ones! Later edit: 14…
