Liczymy pasujące modele…
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
Similiar to MetalheadPrinting's “ Gengar (no watermark) ”, this is a clean version of Anthonylu's Gengar model they made on thingiverse . However my version still offers the three piece print assembly and the detailing on the eye and…
I added some high frequency details like skin and stone to the original design, so it can be completely painted by drybrushing. For the paint job, i primed it black, then added some blue, green and light-blue paint with a lot of water so…
This is a remix of the Sea of Thieves Megalodon by mordekain . I smoothed out a lot of the model to remove the semi-low poly look of the original and split it into pieces for easier printing. A very minimal amount of supports are needed…
This is remix of https://www.thingiverse.com/thing:4596529 by thomasotwo@thingiverse I wanted those mountains higher and thicker. So I modified it in Blender to make it thicker and then I scale its height to 133% (10mm). It's still fits…
Prints without supports (or brim if you sink the model down far enough). You'll need to sink the model down in the slicer settings a bit.
29T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional torque/acceleration over stock 32T pinion, at the expense of some top speed. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with…
Since the original was copy right struck on a different site, I redesigned this doll stand for generic fashion dolls of about 25 to 30 cm height. These dolls may or may not attend schools of secondary education, potentially with a…
I wanted to place more jumper wires in the same model
This is a recreation of @Rainers original Car phone mount https://www.printables.com/model/97310-car-phone-holder-samsung-cd-mount - this mount printed and worked almost perfectly for my requirements. I've just moved the front up a little…
I really liked the way the original Tie Fighter DIY by Racoon Media fit together, but I wanted something with a bit more detail. Wings and pins assemble the same way as https://www.printables.com/model/335994-tie-fighter-diy. I glued the…
Samurai incense holder with one hole and higher hat
Just a bit higher ;-) I've added rubber feets to the hardfeets. Printed in filaflex with 10% Concentric Infill and Top/Bottomlayer fill pattern in Archimedean Chords. UPDATE 29.09.2019: added gcode to use with filaflex. Print instructions…
Rocket Designed to fly off 29mm motors for best performance. The Rocket glues (super glue / CA glue) together The pieces stack from Top→Down as follows - Nose Cone, BS3, BS2, BS1, FINCAN Rail buttons can be mounted to the printed holes…
This is just a quick remix. I raised the walls by 10mm, added chamfers to the bottom, and closed the gap at the back on the inside, as desiccant often gets stuck there. Prints well without Supports PETG recommended for drying
Well just a 30mm spacer for the top (print 4) and some caps for the M3 hardware uses 20x M3x40 hex screw. And the feet , print in TPU (print 4)
The Savior Valkyrie DB Beyblade core bursts too easily due to the teeth and the shape of the driver opening. This fixes the problem. Adjusted the opening for the driver to be the size of a GT beyblade. Designed from scratch taking…
I did these to be able to clean under the sofa with the vacuum cleaner. Hight 75mm
Changed hight of letters to make it same color as jesus. Good for white walls
A great small thing! With this, you can set your plants at the exact hight you want them to be in the pot! And it also helps the plant not to stand in water. Important information: The models can be easily scaled to the right hight by…
The hight of the parts got increased to lift the needles higher to help especially when knitting heels.
This remix makes it so the LCD controlbox sits 1.5mm higher to allow the LACK drawers to open (when also using the drawer spacers ). Raising it by 1.5mm is enough to allow the drawers to open under the LCD controller, but still sits below…
I only change the screw holes position, please support the original designer, Nora. The idea for screw holes position modification is inspired by this youtuber https://www.youtube.com/@3DandTeePrinting
Originally remixed from "Hi-ratio evoloid planetary gear" by Parkinbot (thing:4127285) We can obtain still higher ratios if we use evenly spaced planet gears with tooth counts which wouldn't normally mesh with a conventional ring gear. We…
10mm LED stripes mountable, cable clips for their wires and the top step is a little bit higher for sealing tape
This are remixed (completely new designed, except the Dimension of the Rails) Anti-Vibration Feet to fit in larger Fans for the PSU and Motherboard. They feature different angles and Material strengths to eliminate different Vibration…
37T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional top speed over stock 32T pinion, at the expense of acceleration. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with other 48DP…
I found the original and another version with airflow slots. However, I wanted a solution that could be both ventilated
This is a higher tollerance version of the top mechanism for the deckmate by Elegant. If you're having issues fitting the top and bottom mechanisms together, try giving this a shot.
Bought this keyboard, but was unhappy with how low it was. I've designed new feet, which are twice as higher. If you go anything higher, then the rubber feet at the lower part are not touching the surface and keyboard slides. You need…
wider and higher construction. Better hiding buttons and volume wheel.
Box for WeMos 18650 LiIon battery shield. Same as original but with 3mm more vertical space to make more room for battery. OpenSCAD script included for people who need more/less space. Category: Electronics
I liked the original model a lot, but I think two layers for the base is a little bit too thin especially when ironing (can see through the base with two layers). So I added a third layer at the base. Print instructions Print using 0.15mm…
Whether you want to raise your Anycubic to fit a bigger motherboard/PSU fan, to fit storage space beneath or just to fit in your space, these feet will raise your Anycubic by 65mm. It uses the standard rubber feet and screws (screw…
Für meine PRUSAMENT Filament Rollen in Trockenboxen , habe ich dieses Regal entwickelt. Für die beste Druckqualität (0,2 mm) muss man leider viel (Druck-)Zeit haben, die sich jedoch sehr lohnt. Druckt man die Teile im 0,3 mm Draft-Modus,…
I couldn't find a version with the holes positioned toward the top, so I made up this version. It has a 2mm thick wall to help keep heat and fumes inside. By moving the four holes toward the upper edge of the opening, the PTFE tubes sit…
Deskmate, higher pen storage mod
I started with the STL of the "3511680" version, then modified it so: 1) The part that covers the top of the phone fully extends over the SD/SIM card bay (since you can't open it anyway with the original design) and leaves just a little…
This is a higher Version of the original box, so you can mount three WAGO 221-413 or 221-423. It also has three outlets.
Print all parts. Use provided images for appropriate colors, color changes, and assembly. No special printing instructions, use standard settings. All parts should be oriented so no supports are needed. Suggested colors and any specific…
A simple re-design from a model that you can find here, https://v-core.ratrig.com/printed_parts/
5015 sv06 fan mod for non standart/shorter nozzles
This is to bring up the AMS Hub higher into the air for easier access You will need: Tilted_Lower : 2 M3 Screws size M3-12 and 2 M3 Nuts Tilted_Top Final : 1 M3 Screws size M3-12 and 2 M3 Nuts Note if your having feeding issues its…
Higher Razer Leviathan II foots
Originally created by sychan , remixed by crazywoj
Support needed. This feet is suitable for LCD + Hyperpixel 4" touchscreen
Printable Mount for T1 Redot (China clones) in 3 different sizes. With a Paintball Mask I use the Highest one. Print Settings Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Herz PLA Category: Sport &…
Due to the curvature of the dish, I wasn't able to get the mirrors, or the back of the dish, to print very well. I separated the backs from the mirrors in Tinkercad and printed them separately with the face of the mirrors on the build…
V-Core 3 Electronic Rear higher
To reduce the print time I decided to use CarbonLook PLA with a 0.4 nozzle and 0.3 layer height
For anyone interested in a higher detail/higher polygon, pano nods for their Dummy 13! This is originally designed/scaled for %200 scale of the original Dummy 13 scaling. This is the minimum scale I would personally recommend to print in.…
UPDATED 2022/05/14: By request, uploaded Keystone inserts for "Classic" (DAP-based) RackPi. UPDATED 2021/12/26: Lots of tweaks and new accessories. Nothing incompatible (i.e., no reason to reprint anything you're happy with). I started…
The joys of having an uneven floor: I needed to raise the front feet of my ALEX drawers to 18 mm, so I quickly made these feet. The FreeCAD model is parametric, so if you need a different height, just load the file into FreeCAD, change…
Remixed the original to make it a bit higher and with tighter tolerances
The original J1772 holder by Ken worked well for me, except that loops of cable hung over the top would frequently fall off as the lip is quite low. When my old one broke I decided to modify it to add a higher lip. While I was working on…
My Wemos D1 didn't fit into the original Case, i enlarged the Case.
Print from PETG Infill: 15% Fill pattern: Rectilinear Support: Organic Higher temperature for V6 nozzle in bgcode Original here
The original model was much to close to the print bed on my K1C so I moved the mounting holes by 0.6mm to get a higher position. Now the tap function works. Print in ABS or some other high temperature material.
Remix of the MDT model. The camera position has been changed upwards to avoid a Y-axis collision. More support needed.
I don't own the game myself, but a friend of mine told me that the box needs a bit more headroom if you sleeve the cards. Since the model of @LambertW_371596 is very nice and clean, I decided to remix it, only altering the height for both…
12-16 pillar set for Märklin H0 C track up to 100mm (about 4 inches) The amount of pillars depends on the maximum height. Every height available as a ramp with all needed pillars and individually. The original files are also available for…
Es ist ein remix von kaltmann, ich habe in nur etwas ehöht, damit keine Tauben von den Seiten fressen können. Danke für das Original Design ! It's a remix by Kaltmann, I just increased it a bit so that pigeons can't eat from the sides.…
I saw a YouTube video of Barnacules and he printed the original one at 250% size but it was very faceted at that size. I wanted to make one so I re modeled it using the original as a guide but made it with many more polygons so it could…
Screws will be necessary for the placement of the motor, first you have to install the adapter on the motor and then place the motor on the machine fixing it with the cover https://www.printables.com/es/model/356919-pet-filament-machine…
Rotating parts with slightly higher tolerance so it fits better and runs smoother. Print with Brim enabled!
The original one was too low for me so the remixed version has 59mm
Higher capacity tumbler bowl for the HarborFreight 5lb tumbler. It is designed to use the original bowls gasket and lid. This bowl also has a higher side wall angle, increased height of the center post, decreased diameter of center post,…
Print on the side, 8 screws, done.
After I had used the solder holder a little, I unfortunately found that it is clearly too light. For this reason, I have raised the base and lower 3 recesses for M10 nuts let in. This makes the holder much more stable on the table. As…
A remix of the fantastic Cantilever Box by Michal Fanta. I wanted the box to use with larger items, so I removed the top shelf and adjusted the size of the remaining drawer. I also designed some inserts/divider for the new drawer as well…
Three new drawer heights. The base drawer is marked as 50 (base height). The new drawers are in heights 75, 100 and 125 (in the photos). The bases and stands are in the basic version – Versatile Stackable Storage Box System . ⚠ The…
This is a remix of the great hot shoe adapter https://www.printables.com/de/model/174328-hot-shoe-adapter-for-camera
Printed with 0.16 Optimal profile, 4 walls, 5 bottom layers.
this is remix from : https://www.thingiverse.com/thing:4028408 hi, i make the esun ebox holder higher with hole for it's cable thanks for W11N4R7 that create this cool product :) Category: 3D Printer Accessories
This is a remake of my other badge here http://www.thingiverse.com/thing:34807 This one is higher resolution and has a hole or round inset in the back for a 3/8" magnet. This allows it to be a fridge magnet or use another magnet under a…
The text was offset from the base area. By changing the filament (here at 3mm height) the text can be printed in a different color. Compared to the existing remix, the resolution has been improved for large prints. Print size: 180mm x…
This is 7mm higher version of KalleKnall's Prusa MK3 hard feet. I've included Fusion 360 source file if anyone needs some additional modifications.
The original model was very nice and low profile, which I love – but I have a whisker biscuit on my bow, so that prevents use of two of the arrow slots - and on my riser (PSE Pro Max), the backs of my fingers make contact with the arrows,…
A slightly bigger adapted insert for Cyberdyne's Topcover that hinges in place instead to vent the cover. The inserts are print-in-place, with no supports needed, there is a very small supports in the hinge, so the first time you rotate…
Introducing the 1-60 EX ratchet! An enhanced version of the infamous ratchet with a longer contact point that results in harder hits, with higher risk of bursting however. I havent tried it with pla but i'd reccomend using petg, or if you…
A higher holder for battery on WLToys 144001. This one is only for the front, as you still need lower one for the cables to clear. Might design the rear one if the battery will still be falling out. It's snug fit for my Teranty 3500 mAh…
I am learning AI to try and stay relevant and maybe bring it to some projects. I got a Seeed Studio Jetson device and running it at MAXN and keeping it busy can cause thermal throttling. After attaching a fan there is not enough clearance…
I needed two top and bottom blankplates with much ventilation for my Ubiquiti rackbuild which would also add strength
I like TheSameNameTwice 's adjustable spool holder very much and expanded mine with the Remix of A.N.A. but the rollers round the bearings touched the tips and the bearings did not role freely. So I remixed the tips to be a bit higher…
the original model holes for the little rodes were very tigh so remixed to make it work for me, the little rods holes
UPDATE: Added taller versions for the Teaspoons, Soup/Ice Tea and Fork Holder. Teaspoons now hold 32 and each of the others hold 16 of each type. Also slightly increased the length of the Soup/Ice Tea spoon holder to accommodate longer…
Based on Vojtěch_L's design, but in a higher resolution for smoother printing. Since, especially on the MK4 the decimation of the round shapes of this model is quite visible. Redesigned in FreeCAD, included the step and FCStd files
Pinecil Gridfinity stack that can store your soldering iron, 5 tips, cable, stand and other accessories.
Hey, i made a remix from the "Z Axis China Webcam Mount Prusa i3 MK3 " from the0bone, because i wanted a higher position for my china webcam on my z-axis. This design is 40mm higher than the original from the0bone. It works perfectly with…
It's a remix of Coffee Knockbox made by Dominik with added higher walls on the side and back to protect coffee from falling out. This is only outer box - use outer box stick and all inner box from original Dominik work .
9mm higher shelf so that 4 drawer and a basketdrawer under the hinge works. Not possible with orginal IKEA solution. Thanks Dan ( @Dan_3D_49659 ) for this solution. I made it only 9mm higher with cutting the model and extrude it.
A taller rear riser for the Work Louder Nomad E keyboard that tilts the board to 10 degrees and adds a slot to hold the wireless USB dongle. It is a drop-in upgrade for the stock riser and uses the same magnets. Details Uses the stock…
printed in abs 40%infill 5 perimeters 5 top and bottom layers original design by Voron Design
The original design lets you create your own insert boxes for the Allit EuroPlus Flex system with or without dividers. Someone suggested to add some “feet” to lock them in place like it is in the original design. That's the main goal of…
Printed on a Bambu P1S with Bambu Basic PLA. Also had these issue on Ender 3 and Sovol SV01 with multiple different filaments. So I think the Z-height just needs to be adjusted. This is not a uniform scale of the entire model. Its ONLY…
added: cut outs for screws, thermistor spring and a slot for keeping the thermistor grease upright when mounting the hotend. update nov23: added a higher lid 10mm (without hotend nozzle sizes)
The filter of the power supply fan always full with dust in short time intervals. These feet are ~5cm higher and hopefully hinder cat hair and dust..
