Liczymy pasujące modele…
https://ahoydtu.de/ Dimensions: 58 mm x 49 mm x 36,2 mm V1: Solid Housing / V2: Housing with mounting holes / V3: Housing with extra wall mount V4: Dimension 68 mm x 49 mm x 37,8 mm / model for D1 Mini ESP8266 + NRF24L01 and Adapter for…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
I needed some badges from Stranger things season 3 for cosplay. So I knocked up some quick name badges for Steve and Robin for the Scoops Ahoy costumes. Print instructions I have included the gcodes that pause for the colour change…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Just two brackets to mount and a plug to close the open side of an Hoymiles BC06 T-Knot. Nur zwei Halterungen für die Montage und ein Blindstopfen zum Verschließen eines Hoymiles BC06 T-Stück.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intended for the OpenDTU kit from Solarzero for Hoymiles HMS/HMT inverters. https://www.ebay.de/itm/204670587191?var=505293917281 Additionally you need one M3x20 screw to close the case. Printed in PETG Does NOT fit the HM kit!
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
its a garden water spray control nozzle, swichable from jet to spray pattern, meant for 19mm hose, best use Nylon, ASA or PETG. Needs 2 pcs of Socket Set Screws, Full Dog Point, 1/4-28 × 5/16", Alloy Steel, Black Oxide, Hex Socket…
Wydruk około 13,34 €–16,31 € nettoWstępna wycena jednego wariantu
I bought a DTU electronic set with a display which was not fitting in the enclsure. Therefore I adapted the lid.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Gehäuse mit im Deckel verbautem OLed Display (0,96") für ESP32 und NRF24 Antenne; Software AhoyDTU für Hoymiles 1500; extra größer dimensioniert, um die Verkabelung zu vereinfachen
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…
By request: Archery Pocket Quiver with Hoyt Logo Logo from here: https://www.thingiverse.com/thing:3033674 Other designs: Martin Archery: https://www.printables.com/model/431226-archery-pocket-quiver-with-martin-archery-logo PSE:…
I didn't find anything fitting my use-case, so I took the excellent https://www.printables.com/model/427556-ahoydtu-gehause-case-dtu-ahoy-opendtu and https://www.thingiverse.com/thing:4738646 to combine into the above and give enough…
Another case to give your pcb from the Discord-Server of https://ahoydtu.de a home. This version is for the longer NRF antenna which protrudes slightly above the board. The USB connector sits a little deeper due to the longer housing.The…
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…
Below, translated into English by DeepL Gehäuse für die Ahoy DTU /Open DTU mit Waveshare 1.54 Inch E-Paper Display und Externer Antenne Die Ahoy-DTU / Open-DTU ist geeignet, um die Hoymiles PV Wechselrichter der HM Serie mit dem WLAN zu…
Kleines Gehäuse passend für ein ESP32 Dev Board und eine NRF24L01+ Antenne, wenn diese per Dupont-Kabeln miteinander verbunden sind. Der Deckel ist steckbar, hält jedoch trotzdem sehr gut. Das Gehäuse gibt es mit 2 verschiedenen…
Um die Lebensdauer des Wechselrichters zu erhöhen und unnötige Drosselung durch Überhitzung zu vermeiden, bekommt jeder Wechselrichter einen 120mm 12V Lüfter verpasst. Beim original störte mich der Support und die “Sollbruchstelle” des…
Die Homilies Wechselrichter können bei viel Sonne (viel PV Leistung) sehr warm werden. Der Wechselrichter sollte zwar automatisch abschalten, aber man tut der Elektronik etwas gutes, wenn man den Wechselrichter kühlt. Ich habe mir einen…
Gehäuse für ESP32 Microkontroller und Funkmodul. Zum Verwirklichen einer Ahoy-DTU aber auch anderer Projekte. Ich habe für mein Projekt folgende Teile verwendet: Espressif ESP32 WLAN Dev Kit Board Development Bluetooth Wifi v1 WROOM32…
A grip for the hoyt xceed and a bow of the same construction
Case for the components of a Ahoy DTU. See the Ahoy DTU Project Page on Github: https://github.com/lumapu/ahoy The Ahoy DTU allows for communicating with a bunch of Hoymiles Microinverters for small sized Solar Systems. It is even…
This is a casing for an OpenDTU / AhojDTU made from 3 parts. This allows you to read the inverter data of your Hoymiles inverter e.g. for a balcony solar panel. For ordering the right electronic components see pictures. I ordered…
Tweaked the original's files as they didn't quite fit in my box insert. While I was there I broke the player tray into four and added a separate section for the battle dice. Optional hex pattern lids for vertical storage. Files to print:…
AhoyDTU: Wemos D1 Mini, 0,96" Display, NRF24L01+
Spacer for mounting a Hoymiles Inverter on the wall. This was designed with the dimensions of the HMS-1600-4T model, but may fit on other models as well. There are two variants: One which resembles the slots on the inverter. One with two…
This isn't your average Benchy. The Slimer Benchy has been slimed, possessed, and reanimated with paranormal flair. Featuring drippy ghost-like textures, bulging eyes, and an open-mouthed grin of the haunted variety, it’s a spooky remix…
Pressfit Housing for openDTU / ahoyDTU Datalogger. Made this to the smallest factor that makes sense. Used following Components to build: ESP-32S (used one from this set) NRF24L01+ (used one from this set) 6EA of the smallest Jumper Cable…
I had a SSD1306 0,96" OLED display which I wanted to use with my Open DTU. This Open DTU case was a perfect fit for my requirements but unfortunately it didn't include a cutout for the display. As the SSD1306 fits perfectly in the lid I…
I designed a “military” designed ESP32 case for my balcony power plant solar. I use OpenDTU: https://github.com/tbnobody/OpenDTU Parts: 4x M3 Melting nuts: https://amzn.to/3E2j0Yb 4x M3 black screws: https://amzn.to/3KHriIL 1x ESP 32 with…
Spacer Plate for Hoymiles (HMS 800W-2T) to mount on flat surfaces. One model with the name “Capri-Sun” on top - because i think its funny. One model without name tag
I made this simple support for my flower. Can be used for hoya as well. printed on Creality CR 10 S5 laying flat. No support, concentric infill to prevent lines in between when travels. NOTE: the clips on the main picture is not my…
Ckicker plate designed for Hoyt Avalon-riser but might fit on other (Hoyt-) risers too. I had an orignal clicker-plate but it was too short. I found this one https://www.thingiverse.com/thing:2005898 designed by asr93 but it did not…
Ein kleines Gehäuse, passend für D1mini V2 (muss mit Heißkleber fixiert werden) und D1mini V3 (Kann mit 2x2mm Schrauben verschraubt werden). Zusätzlich kann man das NRF24L01+ Modul mit Heißkleber auf dem Block an der Seite fixieren.
📄 Fan bracket for Hoymiles HMS1600-4T micro inverter ✅ Compatibility This clip-on bracket is designed for the Hoymiles HMS1600-4T microinverter and potentially other HMS/HMT models . The inner width of the slot (fit over the cooling fins)…
Ein Lüfterhalter für Hoymiles-1500 um die Temperatur an warmen Tagen zu senken. Der Halter muss in jedem mit PETG oder Temperatubeständigeren Filamenten gedruckt werden. Angepasst für einen 120mm Lüfter. 105mm (Mitte Bohrung zu Mitte…
This is a 3d printed organiser to store all the content for Ahoy, including : base game extension Rivals & Renegades extension Fangs & Fortunes treasure pack All boxes that can contain cards are large enough for sleeved cards. To print To…
UPDATE! I've finally improved the fit for the smuggler trays and added a compartment for the tracking cubes! UPDATE! I’ve added new photos showing the assembly process for the Ahoy insert (base game + treasure pack) to help illustrate how…
A small case designed for the ESP32 NodeMCU + EBYTE ML01DP5 (nRF24L01 +) with an external antenna. This case can be mounted on a wall using a screw/nail or suspended with a string. For the lid, I utilized 2x M3 screws and 2x ruthex…
Case for Wemos D1 mini (esp8266) + 0.96 inch Display Oled
Beschreibung https://ahoydtu.de/ Dimensions: 58 mm x 49 mm x 36,2 mm Added Mounting Holes to screw it on the Wall or ceiling.
This case is made for an Ahoy/ OenDTU appliance wirth the following Parts: -Breadboard 5x7cm (PY-5cmx7cm 2.54mm 22402A-18) -ESP32 WLAN Dev Kit Board Development Bluetooth Wifi v1 WROOM32 NodeMCU -NRF24L01 + PA + LNA SMA Antenne…
Habe ein neues Gehäuse für die Ahoy DTU entworfen, um das USB-Netzteil zu verstecken. Designed a new case for the Ahoy DTU to hide the USB power supply.
Simple insert for Ahoy and all its current expansions: Ahoy (base game) Rivals and Renegades Fang and Fortune Treasure Pack NOTE: this does not support sleeved cards! Print the following: 6x Faction Tray 5x will hold factions and their…
Spacer for mounting a Hoymiles Inverter on the wall. This was designed with the dimensions of the HM-1200 model, but may fit on other models as well. There are two variants: One which resembles the slots on the inverter. One with two…
Hi, this is a simple stand for a Hoymiles HM-1500 micro frequency converter. Mainly designed to keep it in place on a flat roof, under the Panels. You will need: 2pc. M5 threat inserts 2pc. M5 Screw 20mm 2pc. washer The connector is…
The insert for Ahoy is fine but I'm not a fan of putting things in baggies after each game so I made these inserts. They fit in the existing spots in the box but let you store things organized without all the bags. There is a lid for each…
This is an enclosure for an AhoyDTU with ESP-WROOM-32 board and Ebyte E01-ML01DP5 transmitter. Since I couldn't find a case for my AhoyDTU with ePaper display that I liked, I designed this case. I was inspired by the case of…
suitable for HM-800 other models unknown
Ahoy DTU PCB Case I looked online for suitable cases for my Ahoy DTU setup but found none. Therefore, I decided to create a custom PCB using a Wemos D1 Mini. I added support for powering it with 230 volts and included a micro USB…
This is a Adapter to mount the Hoymoiles 800W on a wall. This is for the wifi version.
This is a simple case for an OpenDTU or AhoyDTU unit consisting of a ESP32 and an NRF24L01+ module. Both were mounted on 55mm x 55mm board I got from eBay to save me all the cabling. There are vents on the front side for some air…
As I don't use my Inverter directly from the panel but rather to power it from a battery I can't use the intended mounting options (if you want to call it that) Instead of using some makeshift solution with washers ive sat down to create…
Foot for stacking 2 Hoymiles MS-A2 batteries. 4 of these feet are screwed to the upper battery using the existing rubber feet. The upper battery can then rest on the stable edge of the lower battery. Please note that the WiFi reception of…
Modified version for ESP32, Antenna and 1,3' Display
I designed this model for having a cleaner setup of the AHOY interface for Hoymiles. In the enclosure you may install the BOM ESP32 NRF24L01 E01-ML1DP5 OLED 128x64 I add the step file for further modifications and the Fusion360 file.
Original creator is AaronTech2 from Thingiverse. https://www.thingiverse.com/AaronTech2 I initially printed it flat on the bed and it wasn't horrible but then I tried angling the pieces at a 45* angle with a raft and slim supports(some…
Can be used for various applications to raise a bar or a plant vine. I use it to lift Hoya vine of the cabinet. It is about 15cm high.
Picatinny Rail to mount the Mantis X 8 device on a Hoyt Arcos riser Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 50% Filament: eSun PLA white Category: Sport & Outdoors
Just a quick mecha that I threw together for use in your favorite 6mm giant robot games. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my…
Wanted to mount my GoPro on my bow for hunting. This fits the third hole down on the riser of a Hoyt Powermax. As you see in the pictures it screws together decently. The parts shown are the prototype parts in PLA. I would suggest using a…
EDIT - on my XL halved the time with new version of this insert I am leaving this insert in this form. It works, don't worry. But updates and enhancements will be available in commercial version of insert HERE . Thank you for…
I have an older Hoyt recurve Riser for which the clicker plate was missing. This is a longer version than stock
Print two faction and two smuggler boxes. The smuggler boxes go under the player boards
Summary With the help of this stand, a Hoymiles 800W inverter can be positioned upright and at a slight angle. This reduces the space required and improves heat dissipation, especially in summer. Tool-free installation – no screws…
My Hoymiles HM-800 is installed in a vertical position where rain is always flowing from one PV module directly onto/over the inverter. I know that the inverter is IP67 rated but it cannot hurt to redirect the water so that it doesn't…
This is a Voron 2.4 / Trident skirt and bezel that fits the Elecrow / Hoysond 5 Inch 1024×600 IPS touch screen , which - by the way - is a gorgeous screen. Here is a photo of the screen for reference A thicker version to is also provided…
A detailed 1850s single-mast water hoy featuring a distinctive round tank amidships and clean, unlettered paintwork. Inspired by historical Cisternel vessels, this model captures the authentic 4.3:1 length-to-beam ratio in a three-quarter…
Created a tray for the dice and made the height of the card and player trays just a bit smaller.
A while ago I got fed up that these little guys were so expensive and hard to collect so I decided to make my own!
Simple Housing for Wemos D1 mini and nRF24L01+PA+LNA Wemos D1 mini and nRF24L01+PA+LNA = Wemos Antenne unten WemosD1mini-nRF24L01+PA+LNA-Antenne-Top = Wemos Antenne oben
I wanted to mount my clicker a little forward and hated the mount on site options, so made this. It fits my Hoyt Nexus, not sure if it will fit others.
Succulents Box: Sweetheart Plant (Hoya Kerrii) Not just pretty to look at, but also practical! Can be used as: jewellery box gift box sweets jar organizer of small items secret hiding spot collectible succulents - got to plant them all ;)…
Hot-Key button board for Voron2.4/Trident, like the Bigtreetech HBB , but the Bigtreetech HBB uses a RP2040 micro controller to recive the ssignal from the switches and to control the RGB light, which means you have to add one more MCU…
As my balcony powerstation is mounted on my garage. I led the cables through the roof tiles and put the inverter (Hoymiles HMS1600) on top of the ceiling. As the wood rafters ar in an angle I just put the inverter to a stand. Easy to…
Don’t throw away your wine bottle—reuse it! By printing this handle, you can transform your Choya Kishu plum wine bottle into a handy water bottle for home use. Avoid using PLA; I’ve tested it with PETG and ABS, and both materials are…
Since I have a Hoymiles HM400, which is smaller, I modified Chris's great design to have a solid stand.Since I have a Hoymiles HM400, which is smaller, I modified Chris's great design to have a solid stand.
On some old Hoyer guitars, the pickup housings have rotted. These housings can be replaced with this. Preferably, the upper parts should be printed in beige and the base in black colour. If necessary, the screw-in pole pieces can be…
This is a custom hub and pulley designed to fit the Hoyt ST 5" tires for riders who can't find or don't want to buy the original Hoyt hardware. The original kit was north of $400 for the aluminum pulley and hub set. My experience I'm a…
I couldn’t find a figurine of such a wonderful character anywhere, so I made it myself using artificial intelligence. I made the glasses myself. If they don’t look good to you, I’ll attach the model without them. Of course, there are some…
. . If I saved you time and effort and you feel inclined to throw me a couple bucks for the I spent modeling and actively testing this model my Venmo is (Alex-Garza-48) Thanks !
Untested prototype. The latest revision is watertight and passed the supplied digital dimension checks, but physical fit of the 32.9 mm opening and 35.5 mm terminal-shoulder revision has not yet been confirmed. A replacement bezel for the…
Simple Housing for Wemos D1 mini and nRF24L01+PA+LNA Wemos D1 mini and nRF24L01+PA+LNA = Wemos Antenne unten WemosD1mini-nRF24L01+PA+LNA-Antenne-Top = Wemos Antenne oben
Gehäuse mit im Deckel verbautem OLed Display (0,96") für ESP32 und NRF24 Antenne; Software AhoyDTU für Hoymiles 1500; extra größer dimensioniert, um die Verkabelung zu vereinfachen
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
Don’t throw away your wine bottle—reuse it! By printing this handle, you can transform your Choya Kishu plum wine bottle into a handy water bottle for home use. Avoid using PLA; I’ve tested it with PETG and ABS, and both materials are…
